Error while trying to sync and back up

every time i try to back up or sync my device to my mac i receive this error that saysiTunes could not connect to the iPhone “jj763u’s iPhone” because the device timed out..... how do i fix this? i bought this so i could sync all my devices together

Which OS X is installed on your Mac ?
Click the Apple () menu top left in your screen. From the drop down menu click About This Mac. The version is noted there.
Troubleshooting advice can depend on that information.

Similar Messages

  • "Error while trying to sync Audio and Midi"

    "Error while trying to sync Audio and Midi" I have been having this problem now and then for some time. Now, I can't run any audio files without a lot of popping. I tried all the suggestions on the support document for this issue. I even downloaded new drivers from Motu for my Express XT Midi interface and my 828MK11 Audio interface. There has been no change. HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP!!!!!!
    Also, I have tried reseting the 828 to factory default and that does not help.
    Jonathan Jenkins

    Hi,
    I solved my own problem by resetting the factory presets:
    Follow these steps to restore the MOTU 828mkII to Factory Default Settings.
    Disconnect the firewire cable from the 828mkII
    Press the Setup knob
    Turn the Setup knob all the way to the right
    Press the Select knob
    Press the Value knob
    Power off the interface and plug the firewire cable back in
    Power the interface back on
    The same steps can be followed to restore the Factory Default Settings on a Traveler.
    -Robert

  • Pop up saying error while trying to sync audi and midi

    HELP! is there anyone who is experiencing or has experienced an error pop up saying error while trying to sync audio and midi in your logic pro8? it's doing it on every song I pull up now. I've tried buffering, reloading, Help? all was fine the night before.
    Sincere, The Silver Conductor

    Check the clock source on your audio interface if you're using one. It should be set to internal. What's your setup?

  • I'm trying to sync and back-up my iPad2. I keep getting an error message (1140) saying, "The iPad cannot be synced. An unknown error occured." What on earth is that all about?

    I’m trying to sync and back-up my iPad2. I keep getting an error message (1140) saying, “The iPad cannot be synced. An unknown error occured.” What on earth is that all about?

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • Error while trying to sync audio and video.

    Suddenly out of the blue I'm have all sorts of problems with Logic 8. I keep getting the "error while trying to synchronize audio and midi" error message. Even when I'm just using using the audio side. Do you know of a local logic tech that could check out my system? Might be a problem with my motu 828mk11 audio interface or corrupt drivers, bad preferences. I'm unable to do any work in Logic until I get this problem solved.

    (Did you do any upgrades with the Firewire plugged in?)
    Usually a MOTU reset will fix this.
    Follow these steps to restore the 828mkII to Factory Default Settings.
    •Disconnect the firewire cable from the 828mkII
    •Press the Setup knob
    •Turn the Setup knob all the way to the right
    •Press the Select knob
    •Press the Value knob
    •Power off the interface and plug the firewire cable back in
    •Power the interface back on
    http://www.motu.com/techsupport/technotes/document.2004-06-16.6405589976/view
    If that doesn't work.
    1) Unplug ALL cables from the 828MkII.
    2) Double check that the power cord is really unplugged.
    3. Switch the voltage switch on the side from your setting (110 in the US) to the other setting and back a few times.
    4) Make sure you've set the voltage switch back to the right setting for your country.
    5) Plug everything back in.
    pancenter-

  • Error while trying to sync audio and MIDI, sample rate 39100 recognised??

    When I press record a message appears saying 'error while trying to syncronise audio and MIDI, sample rate 39100 recognised. Check conflict between garage band and external device. I'm using a Behringer UMC-202 interface. The inputs are selected as the device but no audio is present either.

    Just click the icon on each track that stops it acting as a live input. It looks like a sound wave. Only have them clicked orange when using the track to record! I don't know if that will solve your problem!

  • I am getting an error code of 1150 from itunes when trying to sync and back up my ipad

    Need help can not sync or back up ipad4 to computer.

    Settings > General > Restrictions > Install Apps = ON

  • Error while trying to sync

    i have been having problems trying to sync my forth gen ipod touch with Itunes the problem is that itunes usually stalls during the sync so i just cancel it on my ipod but know i am getting a message saying that itunes cant connect with ipods because of an unidentified error. so i unplugged my ipod and tryed to turn it off and it wont all it shows is the little circle bars that normally happens when you tern it off but thats it and it's been over 5 minuts and it still wont turn off please help

    This could be as smple as a CPU overload. Try reducing the voices of the (sampler?) instrument, increase the buffer? Are you sending MIDI bea clock from the controller?
    J

  • Unknown error while trying to build and test web service

    Hi,
    I get this error while building my web service.It says "An unexpected exception
    occurred while attempting to process the classes and annotations for this Web Service.
    Error: Unknown KNEX string: description.null"
    Pasted below is the output on the IDE and the server.
    Please help!!
    Workshop output
    Charges.jws     0     An unexpected exception occurred while attempting to process the classes
    and annotations for this Web Service. Error: Unknown KNEX string: description.null
    Server output
    java.lang.NullPointerException
    at java.lang.Class.isAssignableFrom(Native Method)
    at weblogic.knex.wsdlgen.WsdlTypeBagImpl.getElemRef(WsdlTypeBagImpl.java:928)
    at weblogic.knex.wsdlgen.WsdlTypeBagImpl.crackClass(WsdlTypeBagImpl.java:386)
    at weblogic.knex.wsdlgen.WsdlTypeBagImpl.addType(WsdlTypeBagImpl.java:522)
    at weblogic.knex.wsdlgen.WsdlTypeBagImpl.filter(WsdlTypeBagImpl.java:606)
    at weblogic.knex.wsdlgen.WsdlTypeBagImpl.getElemRef(WsdlTypeBagImpl.java:940)
    at weblogic.knex.wsdlgen.WsdlTypeBagImpl.addParamHolder(WsdlTypeBagImpl.java:121)
    at weblogic.knex.wsdlgen.Schemas.addPartHolder(Schemas.java:45)
    at weblogic.knex.wsdlgen.TypeXlatorImpl.createMessage(TypeXlatorImpl.java:221)
    at weblogic.knex.wsdlgen.TypeXlatorImpl.fromJavaOp(TypeXlatorImpl.java:721)
    at weblogic.knex.wsdlgen.TypeXlatorImpl.fromJavaService(TypeXlatorImpl.java:831)
    at weblogic.knex.dispatcher.TypeUtils.makeWsdlService(TypeUtils.java:1388)
    at weblogic.knex.dispatcher.TypeUtils.makeWsdl(TypeUtils.java:1459)
    at weblogic.knex.dispatcher.DispFile.makeDispClass(DispFile.java:2528)
    at weblogic.knex.dispatcher.DispFile.makeDispFile(DispFile.java:611)
    at weblogic.knex.dispatcher.DispUnit.makeDispUnit(DispUnit.java:50)
    at weblogic.knex.dispatcher.DispCache.ensureDispUnit(DispCache.java:584)
    at weblogic.knex.dispatcher.HttpServer.doGet(HttpServer.java:297)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:945)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:332)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:242)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5352)
    at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:718)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet
    (WebAppServletContext.java:3032)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2466)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)
    Thanks and Regards,
    SSN

    Hello,
    You might try asking your question to the WebLogic Workshop news group: weblogic.developer.interest.70beta.workshop
    Thanks,
    Bruce
    SSNarayan wrote:
    Hi,
    I get this error while building my web service.It says "An unexpected exception
    occurred while attempting to process the classes and annotations for this Web Service.
    Error: Unknown KNEX string: description.null"
    Pasted below is the output on the IDE and the server.
    Please help!!
    Workshop output
    Charges.jws 0 An unexpected exception occurred while attempting to process the classes
    and annotations for this Web Service. Error: Unknown KNEX string: description.null
    Server output
    java.lang.NullPointerException
    at java.lang.Class.isAssignableFrom(Native Method)
    at weblogic.knex.wsdlgen.WsdlTypeBagImpl.getElemRef(WsdlTypeBagImpl.java:928)
    at weblogic.knex.wsdlgen.WsdlTypeBagImpl.crackClass(WsdlTypeBagImpl.java:386)
    at weblogic.knex.wsdlgen.WsdlTypeBagImpl.addType(WsdlTypeBagImpl.java:522)
    at weblogic.knex.wsdlgen.WsdlTypeBagImpl.filter(WsdlTypeBagImpl.java:606)
    at weblogic.knex.wsdlgen.WsdlTypeBagImpl.getElemRef(WsdlTypeBagImpl.java:940)
    at weblogic.knex.wsdlgen.WsdlTypeBagImpl.addParamHolder(WsdlTypeBagImpl.java:121)
    at weblogic.knex.wsdlgen.Schemas.addPartHolder(Schemas.java:45)
    at weblogic.knex.wsdlgen.TypeXlatorImpl.createMessage(TypeXlatorImpl.java:221)
    at weblogic.knex.wsdlgen.TypeXlatorImpl.fromJavaOp(TypeXlatorImpl.java:721)
    at weblogic.knex.wsdlgen.TypeXlatorImpl.fromJavaService(TypeXlatorImpl.java:831)
    at weblogic.knex.dispatcher.TypeUtils.makeWsdlService(TypeUtils.java:1388)
    at weblogic.knex.dispatcher.TypeUtils.makeWsdl(TypeUtils.java:1459)
    at weblogic.knex.dispatcher.DispFile.makeDispClass(DispFile.java:2528)
    at weblogic.knex.dispatcher.DispFile.makeDispFile(DispFile.java:611)
    at weblogic.knex.dispatcher.DispUnit.makeDispUnit(DispUnit.java:50)
    at weblogic.knex.dispatcher.DispCache.ensureDispUnit(DispCache.java:584)
    at weblogic.knex.dispatcher.HttpServer.doGet(HttpServer.java:297)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:945)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:332)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:242)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5352)
    at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:718)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet
    (WebAppServletContext.java:3032)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2466)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)
    Thanks and Regards,
    SSN

  • Error Message "Error while trying to sync Audio and Midi"

    I have been having this problem now and then for some time. Now, I can't run any audio files without a lot of popping. I tried all the suggestions on the support document for this issue. I even downloaded new drivers from Motu for my Express XT Midi interface and my 828MK11 Audio interface. There has been no change. HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP!!!!!!
    Jonathan Jenkins

    Sounds like the MOTU828 needs a reset, the problems you describe can almost always be fixed by a reset.
    -Unplug the firewire
    -press the button "setup", turn full right until
    "factory default"
    - push select
    - confirm with "value"
    - plug back firewire
    pancentyer-

  • In Logic Pro 9.8.1 I get an "error while trying to sync Audio and MIDI"

    I am using a MAC OS X 2.66 GHz Intel Core 2 Duo
    and memory 4 GB 1067 MHz DDR3.
    I am going thru an Apogee Ensemble
    and 2 other external units, an MCU Pro Universal Control surface
    and an Axiom 25.  
    The problem is this was working fine and now I cannot
    get audio.  The signals are there when I load a Logic project,
    just no actual audio.

    Craigius wrote:
    I am using Apple Pro 9.1.8 with a Apogee Ensemble.    Eeternal MCU Pro Universal Control Surface andan Axiom 25.
    Have tried the resolutions recommended and I basically have all signals in projects with no audio.
    Care to share?
    Please detail ALL you have done so far in the way of troubleshooting?   Need this info to avoid the been there done that scenarios.

  • How can I fix an -"Error while trying to sync Audio and Midi problem?

    I am using Apple Pro 9.1.8 with a Apogee Ensemble.    Eeternal MCU Pro Universal Control Surface andan Axiom 25.
    Have tried the resolutions recommended and I basically have all signals in projects with no audio.

    Craigius wrote:
    I am using Apple Pro 9.1.8 with a Apogee Ensemble.    Eeternal MCU Pro Universal Control Surface andan Axiom 25.
    Have tried the resolutions recommended and I basically have all signals in projects with no audio.
    Care to share?
    Please detail ALL you have done so far in the way of troubleshooting?   Need this info to avoid the been there done that scenarios.

  • Error while trying to Open and Delete a BEx Query in Query Designer.

    Hi Experts,
    I have been facing this issue with BEx Query in Designer mode for a couple of days now in Development Environment in BI 7.0.
    I would like to Delete an unwanted BEx Query because I need to give it's name to another BEx Query.
    Whenever I try to Open this Query in BEx Query Designer to Delete, it gives out an error saying:
    "An error occurred while communicating with the BI server.
    As a result of this error, the system has been
    disconnected from the BI server.
    Detailed Description:
    STOP: Program error is class SAPMSSY1 method : UNCAUGHT_EXCEPTION
    STOP: System eror in program CL_RSR and form GET_CHANMID-01 - (see long text)"
    Details text is as below:
    Diagnosis
    This internal error is an intended termination resulting from a program state that is not permitted.
    Procedure
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
    For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
    I have tried with SAP Note 899572, but still it's the same.
    Has anyone faced similar issue? Could you please let me know if you have better ideas or solution?
    Your time is much appreciated.
    Thanks,
    Chandu

    Arun - Thanks a million. You saved me Nine. It worked.
    Could you also please tell me how to rename (Technical) a Query or is it still "Save the Query As" the only way...?
    Points already assigned.
    Thanks,
    Chandu

  • Keep getting an error while trying to sync

    so I got a new Nano 16 GB, very slick device, love the interface and the radio. So the problem I'm having is I go to sync up the Nano, to update the playlist and such, but I keep getting an unknown error (13019) and the only way to fix it is to do a total restore. I've had to do this every time I try to sync up my nano. My computer is a PowerBook G4 running OS 10.5.8 and I'm running iTunes 10.

    Have you tried syncing just one song? Perhaps you have some corrupt music in your iTunes library? Try unchecking the sync music box, apply, and then just add one song to see if it works.
    This article says - update your version... sounds like you have done that but double check.
    http://support.apple.com/kb/TS2830
    -John

  • Error while trying to sync 1st generation iPod touch

    iTunes always show an error sign when I try to sync my 1st generation iPod touch. Anyone knows if it is because the latest iTunes cannot support it or it is due to other issues? I'm afraid to restore it, in case everything disappears and I can't use it anymore.

    The latest iTunes upport all model iPods
    Just what error(s) are you getting?

Maybe you are looking for

  • Anyone tested 24" iMac with FW800 drive?

    Just wondering if anyone has tried using a FW800 drive with the 24" iMac? I tried my Macally enclosure with a Samsung 250 GB drive. I found that the write speed was about 70% of the read speed (using Quickbench 2.1)---very similar to my old dual G5.

  • How to export structure DB to text file

    I want to export structure DB to text file for report to my manager. example: any objects(tables, indexs, constraints) and He need DDL command ("create table" command etc.) How to do this?

  • A magic mouse works in Ipad system?

    a magic mouse works in Ipad system?

  • Problems with flash navigation in Internet Explorer 7

    I have a frameset, the navigation frame uses flash for the navigation - basic getURL code with target frame "MAIN" (which is the name of the frame I want to target). This worked fine in IE6, but when I upgraded to IE7 clicking on the navigation cause

  • Storage Area for GUI status is too small

    Hi Experts, I have developed a custom program in which i ahev my own GUI status for the modal dialog box. At certain point I am getting error "Storage Area for GUI status is too small" What is the solution for this? Thanks.