Error while trying to sync

i have been having problems trying to sync my forth gen ipod touch with Itunes the problem is that itunes usually stalls during the sync so i just cancel it on my ipod but know i am getting a message saying that itunes cant connect with ipods because of an unidentified error. so i unplugged my ipod and tryed to turn it off and it wont all it shows is the little circle bars that normally happens when you tern it off but thats it and it's been over 5 minuts and it still wont turn off please help

This could be as smple as a CPU overload. Try reducing the voices of the (sampler?) instrument, increase the buffer? Are you sending MIDI bea clock from the controller?
J

Similar Messages

  • "Error while trying to sync Audio and Midi"

    "Error while trying to sync Audio and Midi" I have been having this problem now and then for some time. Now, I can't run any audio files without a lot of popping. I tried all the suggestions on the support document for this issue. I even downloaded new drivers from Motu for my Express XT Midi interface and my 828MK11 Audio interface. There has been no change. HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP!!!!!!
    Also, I have tried reseting the 828 to factory default and that does not help.
    Jonathan Jenkins

    Hi,
    I solved my own problem by resetting the factory presets:
    Follow these steps to restore the MOTU 828mkII to Factory Default Settings.
    Disconnect the firewire cable from the 828mkII
    Press the Setup knob
    Turn the Setup knob all the way to the right
    Press the Select knob
    Press the Value knob
    Power off the interface and plug the firewire cable back in
    Power the interface back on
    The same steps can be followed to restore the Factory Default Settings on a Traveler.
    -Robert

  • Pop up saying error while trying to sync audi and midi

    HELP! is there anyone who is experiencing or has experienced an error pop up saying error while trying to sync audio and midi in your logic pro8? it's doing it on every song I pull up now. I've tried buffering, reloading, Help? all was fine the night before.
    Sincere, The Silver Conductor

    Check the clock source on your audio interface if you're using one. It should be set to internal. What's your setup?

  • Error while trying to sync audio and MIDI, sample rate 39100 recognised??

    When I press record a message appears saying 'error while trying to syncronise audio and MIDI, sample rate 39100 recognised. Check conflict between garage band and external device. I'm using a Behringer UMC-202 interface. The inputs are selected as the device but no audio is present either.

    Just click the icon on each track that stops it acting as a live input. It looks like a sound wave. Only have them clicked orange when using the track to record! I don't know if that will solve your problem!

  • Error while trying to sync audio and video.

    Suddenly out of the blue I'm have all sorts of problems with Logic 8. I keep getting the "error while trying to synchronize audio and midi" error message. Even when I'm just using using the audio side. Do you know of a local logic tech that could check out my system? Might be a problem with my motu 828mk11 audio interface or corrupt drivers, bad preferences. I'm unable to do any work in Logic until I get this problem solved.

    (Did you do any upgrades with the Firewire plugged in?)
    Usually a MOTU reset will fix this.
    Follow these steps to restore the 828mkII to Factory Default Settings.
    •Disconnect the firewire cable from the 828mkII
    •Press the Setup knob
    •Turn the Setup knob all the way to the right
    •Press the Select knob
    •Press the Value knob
    •Power off the interface and plug the firewire cable back in
    •Power the interface back on
    http://www.motu.com/techsupport/technotes/document.2004-06-16.6405589976/view
    If that doesn't work.
    1) Unplug ALL cables from the 828MkII.
    2) Double check that the power cord is really unplugged.
    3. Switch the voltage switch on the side from your setting (110 in the US) to the other setting and back a few times.
    4) Make sure you've set the voltage switch back to the right setting for your country.
    5) Plug everything back in.
    pancenter-

  • Keep getting an error while trying to sync

    so I got a new Nano 16 GB, very slick device, love the interface and the radio. So the problem I'm having is I go to sync up the Nano, to update the playlist and such, but I keep getting an unknown error (13019) and the only way to fix it is to do a total restore. I've had to do this every time I try to sync up my nano. My computer is a PowerBook G4 running OS 10.5.8 and I'm running iTunes 10.

    Have you tried syncing just one song? Perhaps you have some corrupt music in your iTunes library? Try unchecking the sync music box, apply, and then just add one song to see if it works.
    This article says - update your version... sounds like you have done that but double check.
    http://support.apple.com/kb/TS2830
    -John

  • Error while trying to sync and back up

    every time i try to back up or sync my device to my mac i receive this error that saysiTunes could not connect to the iPhone “jj763u’s iPhone” because the device timed out..... how do i fix this? i bought this so i could sync all my devices together

    Which OS X is installed on your Mac ?
    Click the Apple () menu top left in your screen. From the drop down menu click About This Mac. The version is noted there.
    Troubleshooting advice can depend on that information.

  • Error while trying to sync 1st generation iPod touch

    iTunes always show an error sign when I try to sync my 1st generation iPod touch. Anyone knows if it is because the latest iTunes cannot support it or it is due to other issues? I'm afraid to restore it, in case everything disappears and I can't use it anymore.

    The latest iTunes upport all model iPods
    Just what error(s) are you getting?

  • Error while trying to sync ipod

    I manually sync my songs so thats not the problem. But when I plug it in it automatically syncs my photos and other stuff but it doesn't work..it says:
    The iPod "Jeana's" cannot be synced. An unknown error occurred (-39).
    Has anyone else had this problem..if so please tell me how you fixed it. I have photos I want to add.

    You might have a corrupt iPod photo cache:
    Photo Sync creates iPod photo Cache
    If you delete the cache, can you get photo syncs to go through properly?

  • Error while trying to sync products from BRM to CRM

    Error is :
    Required field is missing in instance of Integration Component 'Price List Item - Import' with the user key '[Price List Id] IS NULL AND [Product Id] = "1-4NVGR"': 'Price List Id' is a required field. Please enter a value for the field.(SBL-DAT-00498)(SBL-EAI-04389)
    We are using AIA2.5 for integration.
    Siebel version is: Siebel 8.1.1 SIA [21111]
    and I have applied AIA251.zip on it.
    Please help by replying.

    Hi,
    We are not sending Pricelist Info while product synk, as per BRM team they are doing following :
    1. created a product
    2. attached the product with a deal
    3. the deal is attached to a plan
    4.comnmiting Product
    previously we were using Siebel 8.1.1 SIA [21111] and AIA2.0.1 at that time also they did not pass value for Pricelist but that time Products was getting synk without issue.
    now we upgraded to 8.1.1.4 SIA [21225] ENU(*) and applied ACR474 and AIA2.5 and getting above error.
    the data is going to AIA properly but it is facing issue while synk to CRM.
    Please guide,
    Thanks and Regards,
    Suchetana.

  • In Logic Pro 9.8.1 I get an "error while trying to sync Audio and MIDI"

    I am using a MAC OS X 2.66 GHz Intel Core 2 Duo
    and memory 4 GB 1067 MHz DDR3.
    I am going thru an Apogee Ensemble
    and 2 other external units, an MCU Pro Universal Control surface
    and an Axiom 25.  
    The problem is this was working fine and now I cannot
    get audio.  The signals are there when I load a Logic project,
    just no actual audio.

    Craigius wrote:
    I am using Apple Pro 9.1.8 with a Apogee Ensemble.    Eeternal MCU Pro Universal Control Surface andan Axiom 25.
    Have tried the resolutions recommended and I basically have all signals in projects with no audio.
    Care to share?
    Please detail ALL you have done so far in the way of troubleshooting?   Need this info to avoid the been there done that scenarios.

  • How can I fix an -"Error while trying to sync Audio and Midi problem?

    I am using Apple Pro 9.1.8 with a Apogee Ensemble.    Eeternal MCU Pro Universal Control Surface andan Axiom 25.
    Have tried the resolutions recommended and I basically have all signals in projects with no audio.

    Craigius wrote:
    I am using Apple Pro 9.1.8 with a Apogee Ensemble.    Eeternal MCU Pro Universal Control Surface andan Axiom 25.
    Have tried the resolutions recommended and I basically have all signals in projects with no audio.
    Care to share?
    Please detail ALL you have done so far in the way of troubleshooting?   Need this info to avoid the been there done that scenarios.

  • Error Message "Error while trying to sync Audio and Midi"

    I have been having this problem now and then for some time. Now, I can't run any audio files without a lot of popping. I tried all the suggestions on the support document for this issue. I even downloaded new drivers from Motu for my Express XT Midi interface and my 828MK11 Audio interface. There has been no change. HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP!!!!!!
    Jonathan Jenkins

    Sounds like the MOTU828 needs a reset, the problems you describe can almost always be fixed by a reset.
    -Unplug the firewire
    -press the button "setup", turn full right until
    "factory default"
    - push select
    - confirm with "value"
    - plug back firewire
    pancentyer-

  • Error message while trying to sync photos

    While trying to sync my photos to my new iPod Classic (80G), I get an error message that says "Some of your photos were not copied to the iPod because they can not be displayed on your iPod." In reality, NONE of my photos were copied. They're JPEG (about 1M each). HELP!!

    Hello jdoueck,
    After reviewing your post, I have located an article that can help with syncing to Outlook. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
    Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010 - Apple Support
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • HT1386 while trying to sync with i tunes keep getting 1150 error message

    While trying to sync i phone 4s to i tunes keep getting error message 1150, any help greatly appreciated

    See these Discussions...
    https://discussions.apple.com/message/20333452#20333452
    https://discussions.apple.com/message/20084510#20084510

Maybe you are looking for

  • How do I search contacts by a field other than name (e.g. category)?

    I recently switched from Blackberry to iPhone 4, and I use my iPhone 4 primarily for business. I have a PC and use Outlook as my contacts application. I regularly populate my Outlook contact records with various notes, and I regularly categorize my c

  • Going Back to the main frame, from inside a movie clip time line.

    In flash CS5 I want to go back to the main time line, from inside a movie clip button, so when i click the the movie clip it goes to another frame on the main time line.. Can anyone help me? Thanks Daniel Derrick

  • Unable to write to Seagate Backup Plus drive on Mac

    I just installed a brand new Seagate Backup Plus drive on my laptop with the goal of being able to use it on Macs and PCs.Seagate's web site says this: Using the drive under MacOS and Windows If you want to use the drive under Windows and MacOS, simp

  • WAN Replication

    Is there any more comprehensive guides on setting up WAN replication between clusters ? The main documentation seems fairly limited and doesn't give any examples. Currently have 2 clusters set up and attempting to setup replication between them, but

  • WHAT IS ACCRUAL?

    HI SAP GURUS CAN ANY ONE HELP ME OUT 1.     WHAT IS REQUIREMENT , ALTERNATE CALCULATION TYPE, ALTERNATE CONDITION BASE VALUE/ 2.     WHAT IS ACCRUAL? 3.     WHAT IS REBATE? HOW REBATE IS CALCULATED IN PRICING PROCEDURE? 4.     WHAT IS MATERIAL DETERM