Error while trying to use Photomerge and stitch a few pictures with Photoshop CC 14 on Windows 8.1

I am getting an error while trying to merge some pictures together using photomerge in photoshop cc14, it says photoshop has encounter an error, and it closes photoshop after that, I cannot use photomerge at all, everything else works fine. Any help anyone???

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Similar Messages

  • Error while trying to use Ant and creating Jdbc Datasource

    I was following the documentation to auto-create my datasource in my weblogic server. I get an error while it is trying to link the datasource to the server. Does anybody have any ideas,it is almost like the query to get the server isn't working.
    Here is my ant task:
    <target name="setupJdbcDatasource">
         <wlconfig url="t3://localhost:7001" username="weblogic" password="weblogic">
         <query domain="MyDomain" type="Server" name="AdminServer" property="adminserver"/>
         <create type="JDBCConnectionPool" name="TestDatasource" property="DatasourceTest">
              <set attribute="CapacityIncrement" value="1"/>
              <set attribute="DriverName" value="weblogic.jdbcx.oracle.OracleDataSource"/>
              <set attribute="InitialCapacity" value="1"/>
              <set attribute="MaxCapacity" value="10"/>
              <set attribute="Password" value="cmuser"/>
              <set attribute="Properties" value="user=cmuser SID=ORCH serverName=10.13.5.144 portNumber=1521"/>
              <set attribute="RefreshMinutes" value="0"/>
              <set attribute="ShrinkPeriodMinutes" value="15"/>
              <set attribute="ShrinkingEnabled" value="true"/>
              <set attribute="TestConnectionsOnRelease" value="false"/>
              <set attribute="TestConnectionsOnReserve" value="false"/>
              <set attribute="URL" value="jdbc:bea:oracle://10.13.5.144:1521"/>
              <set attribute="Targets" value="${adminserver}"/>
         </create>
         </wlconfig>
    </target>
    My Domain is MyDomain, and server is AdminServer. The error I get is:
    [wlconfig] weblogic.management.DistributedManagementException : Distributed Management [1 exceptions]
    BUILD FAILED
    X:\ibutt_PCView\src\CM\build.xml:285: Error invoking MBean
    command: javax.management.MBeanException
    And in my server log:
    jdbcDataSourceBean=[MBeanServerInvocationHandler]com.bea:Name=CP-ConfigManagemen
    tTest,Type=weblogic.j2ee.descriptor.wl.JDBCDataSourceBean,Parent=[MyDomain]/JDBC
    SystemResources[CP-ConfigManagementTest],Path=JDBCResource
    <May 21, 2006 3:50:57 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception
    while creating connection for pool "ConfigManagementTest": [BEA][Oracle JDBC Dri
    ver]Missing connection information: no serverName specified.>
    <May 21, 2006 3:50:58 PM EDT> <Error> <Deployer> <BEA-149265> <Failure occured i
    n the execution of deployment request with ID '1148241051441' for task 'weblogic
    .deploy.configChangeTask.2'. Error is: 'weblogic.application.ModuleException: '
    weblogic.application.ModuleException:

    Hi. This seems like an XML parsing problem.
    Could you please try changing the driver
    properties from:
    <set attribute="Properties" value="user=cmuser SID=ORCH serverName=10.13.5.144 portNumber=1521"/>
    to:
    <set attribute="Properties" value="user=cmuser SID=ORCH"/>
    The server and port are already in the URL
    thanks,
    Joe

  • "error while trying to synchronize Audio and MIDI"

    Hello All,
    Just got Logic 8... installed (as upgrade from 7)
    I keep (consistantly) getting this:
    "error while trying to synchronize Audio and MIDI" when in play or record mode... has anyone any ideas regarding a 'fix' or maybe even to point out stupidity on my part re settings; I'm open to comments here and would obviously love to get this fixed/sorted out.
    System is basically: G5 Dual 1.8/OS 10.4.10/MOTU 828 Mk2
    Thanks in advance.

    Hi,
    I first did what the manual was telling me but that made no difference as the sync would drop within 5 to 15 bars... very frustrating.
    Since my original posting I have spoken with MOTU regarding this Audio/MIDI sync problem. There is evidently a simple reset that needs to be done (that is if like me you are using a MOTU 828 Mk2 interface), you have to toggle through both digital input and output settings in the Audio Control Panel. The problem then goes away.
    I hope that is helpful. I think that this probably is relevant to all MOTU interfaces, or is at least worth trying if you are having this problem... maybe other manufacturers too... ?
    Cheers, Kick

  • Error while trying to sync audio and MIDI, sample rate 39100 recognised??

    When I press record a message appears saying 'error while trying to syncronise audio and MIDI, sample rate 39100 recognised. Check conflict between garage band and external device. I'm using a Behringer UMC-202 interface. The inputs are selected as the device but no audio is present either.

    Just click the icon on each track that stops it acting as a live input. It looks like a sound wave. Only have them clicked orange when using the track to record! I don't know if that will solve your problem!

  • Error while trying to synchronise audio and midi

    Hi
    Logic worked all day and suddenly start giving this message:
    error while trying to synchronise audio and midi.
    Nothing was changed and we also have no sound.
    We don't have any midi device, its just the G5 and Logic installed.
    Any idea how to solve this issue.
    Jeanne

    Howdo
    Someone else has been having this problem and I've tried to help 'cos it used to happen to me too. Try adjusting your I/O buffer level in your Logic Audio Driver preferences - raise it a bit higher and the problem should go away. Problem is you get more latency. (I'm assuming it's set lower than 512, but not knowing your audio hardware... and your not using internal audio are you???)

  • Pop up saying error while trying to sync audi and midi

    HELP! is there anyone who is experiencing or has experienced an error pop up saying error while trying to sync audio and midi in your logic pro8? it's doing it on every song I pull up now. I've tried buffering, reloading, Help? all was fine the night before.
    Sincere, The Silver Conductor

    Check the clock source on your audio interface if you're using one. It should be set to internal. What's your setup?

  • Error while trying to sync audio and video.

    Suddenly out of the blue I'm have all sorts of problems with Logic 8. I keep getting the "error while trying to synchronize audio and midi" error message. Even when I'm just using using the audio side. Do you know of a local logic tech that could check out my system? Might be a problem with my motu 828mk11 audio interface or corrupt drivers, bad preferences. I'm unable to do any work in Logic until I get this problem solved.

    (Did you do any upgrades with the Firewire plugged in?)
    Usually a MOTU reset will fix this.
    Follow these steps to restore the 828mkII to Factory Default Settings.
    •Disconnect the firewire cable from the 828mkII
    •Press the Setup knob
    •Turn the Setup knob all the way to the right
    •Press the Select knob
    •Press the Value knob
    •Power off the interface and plug the firewire cable back in
    •Power the interface back on
    http://www.motu.com/techsupport/technotes/document.2004-06-16.6405589976/view
    If that doesn't work.
    1) Unplug ALL cables from the 828MkII.
    2) Double check that the power cord is really unplugged.
    3. Switch the voltage switch on the side from your setting (110 in the US) to the other setting and back a few times.
    4) Make sure you've set the voltage switch back to the right setting for your country.
    5) Plug everything back in.
    pancenter-

  • LogicPro 8 "Error while trying to synchronize Audio and MIDI"

    Hello,
    My rig: Dual 2.5 GHz PowerPC G5 3.5 GB DDR SDRAM. OS X 10.4.11. Logic Pro 8.0.2, Motu 828mkII interface, emagic Unitor 8 midi interface, Makie Control Universal, 7200rpm Firewire 800 Hard drives.
    I Just launched a Logic Pro 8 session that was started a few days ago and when I click "Play" there is no audio from the recorded tracks coming through the speakers. All that comes through the speakers is a series of hi pitched (roughly 4k to 6k) beeps and then an error message: "Error while trying to synchronize Audio and MIDI". I've tried restarting everything and still get the same results. I tried switching audio device to "built-in audio" instead of the motu and that works fine, (the tracks play back correctly).
    I've also tried other sessions that have different sample resolutions and bit depth and I also tried reseting all midi drivers.
    All sessions produced the same results, "Error while trying to synchronize Audio and MIDI", and played correctly when using built-in audio device. It's looking like the problem is with the motu.
    How can I trouble shoot this?

    Sounds like the MKII needs a reset.
    You can reset the 828 MkII to default settings in the following way (as provided from the MOTU support page):
    Follow these steps to restore the 828mkII to Factory Default Settings.
    Disconnect the firewire cable from the 828mkII
    Press the Setup knob
    Turn the Setup knob all the way to the right
    Press the Select knob
    Press the Value knob
    Power off the interface and plug the firewire cable back in
    Power the interface back on
    pancenter-

  • Solution for "Error while trying to synchronize Audio and MIDI" and "System Overload" messages

    Article for those who hate Logic error windows
    Seen in Logic Pro 9.1.7 on Mac OS X Lion 10.7.4
    and Logic Pro 9.0.0 on Mac OS X Snow Leopard 10.6.5
    Logic Pro:
    System Overload.
    The audio engine was not able to process all required data in time.
    (-10011)
    Error while trying to synchronize Audio and MIDI.
    Sample Rate xxxxx recognized.
    Check conflict between Logic Pro and external device.
    The search in the help given as follows: overload occurs when you use a lot of tracks and a lot of effects on them, and the synchronization is lost when the selected MIDI track for recording or playback. Yes, this is all that is written in the resources. And here are useful tips that have been found:
    The Bounce function allows the entire instrument track to be recorded as an audio file. This bounced audio file can then be used (as an audio region) on a standard audio track, allowing you to reassign the available processing power for further software instrument tracks. For more details, see "Bouncing Your Project."
    You can also make use of the Freeze function to capture the output of a software instrument track, again saving processing power. For details, see "Freezing Tracks in the Arrange Area."
    These tips - about the timing. About overload - there are no tips, except as "reducing the number of plug-ins" and "increasing latency". Zero useful tips - I got two errors in the test project with a blank audio track with no effects, MIDI drums and standard synthesizer, it was no aux buses, and the entire project was only a single plugin in the master track.
    Here is the configuration of my computer:
    iMac12, 2
    CPU: Intel Core i5 3,1 GHz
    Memory: 4 GB
    And here's a project that almost immediately stops Logic, all instruments and plug-ins with the init-patch, ie not the most demanding settings:
    It's sad.
    When this happened the first time, I could start the project only if the empty audio track has been selected, a track specially designed so that you can at least start the project. Then, this problem has evaporated along with the changing conditions of work and I forgot about it until the last case.
    I was looking for the cause of the problem in the console and the system monitor for two days, and finally I found that Logic ping to the network frequently. I remembered the exact time of occurrence of the problem, and system logs revealed that the problems began immediately, as soon as I deactivate the service of the Internet.
    Solution: enable the Internet, or add a new network service on a computer with no Internet. I just created the Ethernet connection to the ip address 1.0.0.0
    Logic immediately began to sing.

    Hi gabaghoul
    Yes, it worked for me on four different OS and Logic versions (10.6 - 10.8 and 9.0 - 9.1.6)
    It does not work in some cases, hard enough to tell in which one, but you can try, it very easy: go to the net settings and create new Ethernet connection to the ip address 1.0.0.0 and connect LAN cable to the port.
    Also you can try to figure out what happens in your system while Logic error occured - fot that you just start Console and search "logicpro"
    Pay attention to repetitive events in a console and events with suitable timing, not so far from error
    The problem may be related to the GUI or system memory, sometimes turning off Safari (or Chrome, others browsers) might help.
    Message was edited by: spred

  • GarageBand: Error while trying to synchronize Audio and MIDI.

    This error recently started popping up for me while using garageband.
    GarageBand: Error while trying to synchronize Audio and Midi
    Sample rate xxxxxx recognized
    Check conflict between garageband and external device
    When I use garageband, my input and output are usually set to my scarlett 2i2 interface and I've never received the synchronizing error before today.  I am not using any Midi.
    I've checked the Audio Midi Setup tool to make sure that my format is at 44100.0Hz and have set the "sound" in system preferences to use my scarlett 2i2 interface for input and built-in system for output.
    Can anyone help me out with why i'm receiving this error?

    Good grief!  I'm on a Mac OS X and was having this same problem.  All these discussions about so much technical jargon just had me exhausted ... not only did I not understand what was being referred to, but I couldn't imagine how to do what was being said.
    Here's what got me straight:
    1.  Go to System Preferences and click on Sound
    2.  Click on Input and select your USB mic (or whatever you're using)
    3.  Click on Output and select Internal Speakers
    Done.  No more problem with Garageband!

  • Re: ERROR while trying to synchronize Audio and MIDI

    Hi Guys/Gals
    A bit of a strange one. Yes, I have posted a similar question concerning my trusted 2.7ghz G5 PPC and my Digidesign 003R which it turned out that the Digi's FW ports were to blame.
    New issue. I have just completed an install on a client's machine, here's it's specs etc:
    Hardware:
    iMac 2.8Ghz Duo Core Intel, 4Gb ram, 500Gb HD etc (the custom top end before last week's upgrade) arrived last week. Running Leopard 10.5.2 and has all the latest updates. (firmware/software)
    Apogee Ensemble (with newest firmware update/upgrade)
    Iomega ULTRAMAX HARD DRIVE 1TB USB 2.0/FIREWIRE® 400/800 (sorry, copied from their site)
    M-Audio Axiom 49 USB Midi controller/keyboard
    Software:
    Logic Pro 8 (latest 8.0.1) All standard plugs/samples, no third parties at all, just 100% Apple install.
    Reason 4 (latest 4.0.1)
    I reformatted the built-in hd to two partitions of equal size, one for the OS and one for whatever. I formated the external terrabyte into two partitions also of equal size, non are journalized, all are GUI partitions. I copied the LP 8 demos to both the internal "spare" partition and to the primary "Audio1" partition of the external drive. The Iomega HD is connected via the 800FW port and the Apogee Ensemble is connected via the 400FW port (the iMac has one of each). If I play any of the demo songs from the internal partition, they play perfectly, if I play them off the external Iomega partitions (either) within 8 bars I get:
    "Error while trying to synchronize Audio and MIDI
    Sample Rate 45946 recognized.
    Check conflict between Logic Pro and external device."
    As I said, any demo played back from the internal drives absolutely perfectly..... Any ideas?
    Cheers!!
    Bobs

    There are a lot of different opinions about partitioning in Mac OS X and you can read some of them here:
    http://forums.cnet.com/5208-7592_102-0.html?forumID=25&threadID=44865&messageID= 530144
    and here
    http://forums.appleinsider.com/archive/index.php/t-8096.html
    My opinion is that partitions cam be useful when:
    1. the OS can't manage big volumes (as it was in the past)
    2. the OS can't optimize the space on big volumes
    3. want to install 2 or more separate OSes
    4. organization (like in your case).
    Now, OS X filesystem (HFS+) is robust and reliable and OS X is a multitasking system that parallelizes I/O operations like reading or writing a disk.
    So if you have 2 separate hard disk the system can parallelize the operations (i.e. reading from one and writing into another one) but if you have 2 partitions the system (or better the disk subsystem) have to jump back and forth among the partitions.
    About the linking schema of the Audio interfaces and the FW hard disks it can change: I connect my FW disk to the MOTU and the MOTU to the mac while a friend of mine have to put the disk before of his Presonus.
    Thanks for the beer!
    cheers
    rob

  • (rare?) Error while trying to synchronize Audio and MIDI.

    Hello there,
    My problem: Until today, I've been working with all my projects without any problems with my configuration, but today I've turned on the computer and when I play any project (including a new project with one or two audio tracks or the SAME PROJECT that i've been working the last night), 3 or 4 seconds later I get the fantastic and typical error from logic and an apparently more slow performance loading projects...
    everytime... play, and error...play (or pause) and error...
    "Error while trying to synchronize Audio and MIDI.
    Sample Rate 41347 recognized.
    Check conflict between Logic Pro and external device."
    and sometimes... (randomly)  
    "System Overload. The audio engine was not able to process all required data in time."
    ... and I haven't touched anything / no updates / no setup changes... NOTHING.
    I've tried all these things (searching in the forum) with NO luck:
    http://support.apple.com/kb/TS2111
    http://support.apple.com/kb/TA24535
    My equipment:
    Macbook pro 2,4 Intel Core 2 Duo / 2 GB RAM
    Logic Pro 9.1.3
    Snow Leopard 10.6.7
    Motu ultralite Mk2
    Lacie quadra 1 TB (FW800)
    - I have a motu ultralite mk2, but i've tried with the built-in audio too, and I'll just get the same performance.
    - I've tried with the lacie hardrive on and off and with projects in the internal hardrive and others with all the audios in the external.
    The funny thing is that i've been working in a project this last night and all PERFECT, and now its impossible work with it, and I haven't changed anything.
    PLEASE, any help? I'm confused and I need to finish some works...
    THANKS!

    If the MOTU unit has a reset procedure, unplug it from the Mac and do it now. That's simialr to what the older 828MkII units used do when they needed to be run through the reset procedure.
    It can be caused by a Firewire/USB glitch or power surge when powering up the computer.
    p.s.
    As a side note, I remember that same error.....
    "Error while trying to synchronize Audio and MIDI. Sample Rate 41347 recognized."
    From Logic 3.5, it's been around for that long, with different sample rates of course.
    Back then it was from bad audio drivers.. it's difficult to pin down some of these errors as they can be caused by different things.
    pancenter-

  • Error while trying to use '{' in the query

    Hi,
    The below mentioned query is giving Error while trying to use '{'
    Query:
    select s,x from table(SEM_MATCH(
    '{?s rdf:type <http://www.cs.com/sbip/dwh/mdm/data_modeling#Base_Term> .
    ?s ?p ?x}',
    SEM_Models('foundation'),
    SEM_RuleBases('OWLPRIME'),
    SEM_ALIASES(SEM_ALIAS('dm','http://www.cs.com/sbip/dwh/mdm/data_modeling#'),
    SEM_ALIAS('owl','http://www.w3.org/2002/07/owl#')), null, 'INVALID'))
    where regexp_like(x,'Customers','i');
    Error details:
    ORA-29532: Java call terminated by uncaught Java exception: oracle.spatial.rdf.server.TokenMgrError: Lexical error at line 1, column 1. Encountered: "{" (123), after : ""
    ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 178
    ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 67
    ORA-06512: at line 4
    I am unable to use Option, Filter in query.
    Any solution?
    Please let me know do i need to apply any patch?
    Note: I am using Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
    Regards,
    Kavitha.

    Hi,
    For OPTIONAL support in 11.1.0.7.0, you need the following patch
    Patch 7600122: CURLY BRACE SYNTAX,VIRTUAL MODELS, NETWORK INDEXES AND HINTO FRAMEWORK SUPPORT
    Support for SPARQL FILTERs in SEM_MATCH is not available for 11.1.0.7.0. You will need version 11.2.0.1.0 or later for FILTER support. With 11.2.0.1.0, we recommend that you apply our latest patch set:
    Patch 9819833: SEMANTIC TECHNOLOGIES 11G R2 FIX BUNDLE 2
    All of the above patches are available through My Oracle Support.
    Thanks,
    Matt

  • "Error while trying to sync Audio and Midi"

    "Error while trying to sync Audio and Midi" I have been having this problem now and then for some time. Now, I can't run any audio files without a lot of popping. I tried all the suggestions on the support document for this issue. I even downloaded new drivers from Motu for my Express XT Midi interface and my 828MK11 Audio interface. There has been no change. HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP!!!!!!
    Also, I have tried reseting the 828 to factory default and that does not help.
    Jonathan Jenkins

    Hi,
    I solved my own problem by resetting the factory presets:
    Follow these steps to restore the MOTU 828mkII to Factory Default Settings.
    Disconnect the firewire cable from the 828mkII
    Press the Setup knob
    Turn the Setup knob all the way to the right
    Press the Select knob
    Press the Value knob
    Power off the interface and plug the firewire cable back in
    Power the interface back on
    The same steps can be followed to restore the Factory Default Settings on a Traveler.
    -Robert

  • "Error While Trying To Synchronise Audio And Midi"...non-tempo event found

    "Error While Trying To Synchronise Audio And Midi"...non-tempo event found
    now when I shutdown Logic And relaunch the Project, the notes hang and "WHAT THE FRIIGIN"
    (this was a bug way back when Logic7 was first released)
    this is bad!
    SvK

    Thanks Steven.
    big help. In our session we keep getting this problem where the song counter stops, the music keeps playing and we get an error message saying:
    Non Tempo-Event found in Sync Reference
    We looked in the tempo list and somehow there was a tempo event of 0.00 tempo in there.
    We deleted it, got the same error message, but the prob seems to be fixed.
    Apple, please fix this!
    Thanks
    Felix

Maybe you are looking for

  • Firefox fails to startup, with no error message whatsoever, after installing the Fireftp add-on.

    Firefox fails to startup on OS X 10.6.4, after I install the FireFTP plugin. There's no crash message or anything, just a bouncing icon on the dock and then nothing happens. Creating a new profile solves the issue until i install FireFTP, which again

  • IWeb keeps quitting during publishing process

    I've been using iWeb with my MobileMe account for over 6 months now, there are always some occasional publishing problems, especially since I travelled to Australia where the internet connection doesn't seem to be too fast. But now I've hit a dead en

  • Using a second computer

    I have loaded some cds onto my boyfriend's computer, but i can't load them onto my ipod... Please help as i don't want to go and ask him for help...

  • Application builder invoke node

    Salve a tutti, Ho un problema con la creazione del file eseguibile con un VI. Quando provo a lanciare il BUILD APPLICATION del VI dal menu "Tools" di LabVIEW 7.0 mi appare un messaggio di errore che vi allego. Sembra far riferimento all'Invoke node u

  • Sales Process And EDI Idocs Integration

    Hi Friends,, Good Day To You All !!!! Please enhance my knowledge with your valuable reply. I am new to ABAP and would like to learn the following . 1. Sales process - Starting from the Purchase Order Till shipment is created (All TCodes and the defi