Error while trying to view web interface in browser

Hello all,
I'm getting the following error message while trying to preview my BPS web interface in the BW system as well as my web browser (IE).
Note
The termination occurred in system DBW with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:kblep_DBW_00-v:0-s:403-r:Forbidden
I have created this web interface using the wizard and while checking it the BW system doesn't report any errors or warnings. The same works properly in Excel. I'll be very grateful if somebody can tell me how to sort it out. Thanks a lot.
Regards,
Sumit

Hi,
Go to the transaction "sicf" and check that the following components are active:
-default_host ->sap ->public->bsp
-default_host ->sap ->public->bsp->sap->system
-default_host ->sap ->public->bsp->sap->htmlb
-default_host ->sap ->public->bsp->sap->public->bc
-default_host ->sap ->public->bc
-default_host ->sap ->public->bc->ur
-default_host ->sap ->bc->bsp->sap->system
-default_host ->sap ->bc->bsp->sap->public->bc
(To make this easier you can select on a higher node to activate all lower nodes as well). This should resolve your error.
regards,
Martin

Similar Messages

Error while trying to view the details table from Show/Hide icon

What we are having is two tables, Outer and Inner, having Outer VO and Inner VO,outer VO is linked with inner VO. Now when I am trying to view the inner table
through Show/Hide icon to see the details of the table ,I am getting an error like ...
The record with primary key values {2280} could not be found in view object MisForecastHeadOfiiceAM.InnerTableVO_OuterInnerVL_InnerTableVO.
I want to know how this error can be resolved

Hi Abdul,
We are not getting error while searching. As said earlier
While search for the first time > We could see proper results in out table and Even show/hide is working fine and display correct data in Inner table
When searching for the second time with different criteria > We could see proper results in outer table and on clicking show/hide (to view inner table data), we are getting error.
The record with primary key values {2280} could not be found in view object AM.ViewLinkVL_InnerTableVO
From the error message, we found that its trying to get the row (of inner table) pertaining to first search results and not for the outer table row in context to second search results.

Error while trying to view report instances

Application: BO XI 3.1
Crystal Reports 2008
While in BOE Infoview, users sometimes receive "Internal Error. Please contact system administrator" message as they try to view the report instances (from History tab and/or trying to refresh report). This seems to happen intermittently since sometimes users can run/view the reports as they log out of Infoview and log back in and it works normally again OR wait for a few minutes. THis is very strange and quite annoying having users log out and in all the time and sometimes they can't view the report instances or try to refresh the report with new parameters....Anyboy has experience with this type of behavior?
Thanks!

Do you have any service packs and/or fix packs installed?
What is the sizing of your BOBJ server environment(number of servers, memory etc)?
Regards,
Stratos

500 Internal Server Error while trying to view report from portal page

Hello guys,
We are using BI7. while accessing the queries for the reports, its displaying the 500 Internal Server Error. The error message is:
500 Internal Server Error
Failed to process request; contact your system administrator
BEx Web Application " I_Qnc()2ex.........(etc) does not exist.The application was either ended by a timout or an error occured.
Need your help on this..
Thanks in Advance,
Yogesh.

In which environment are you running this query? Is it Dev. system or Quality/testing or Production ?
1.Generally in most of the cases this will be a TimeOut Error, but not necessarily just that,500 Error applies to variety of problems within the server.
Try and restrict the query to populate less amount of data and check if you get teh same error, if so the check for latest OSS note, have a look at your SP level as well before applying the oss note if relevant.
2. If this doesnt solve,then recheck the query.
Due to large amounts of data in production the OLAP and front -end might require more amount of time than assigned, though not recommended, you can check by changing the waiting time just for thsi query to make sure that this is the problem and not something else which requires basis assistance.
Regards,
Ray

Firefox continuously brings up errors while trying to load web sites.

Over the past few months I have been having problems with Firefox loading web sites. I get the error of either the connection timed out or server took too long to respond, etc, etc. I have done all the troubleshooting tips like emptying cookies, deleting history and I even started Firefox with all plugins and add on disabled and still the same thing. I did the update for the plugins and all that and still no luck. I even uninstalled Firefox and reinstalled Firefox. I checked to make sure it wasn't my system and I even disabled all addons, plugins, and anti virus software and still no luck. The same thing happens even in private browsing mode. This has been happening ever since the last Firefox update. I can't connect to eBay, Dell, and some others even after putting those sites on the safe lists in my firewall and everything. I have no problems with other browsers. And every once in a while if I click "Retry" the page will load fine. And when the "Retry" button doesn't work, I right click and choose reload which works from time to time. Opening up the error console under "Web Developer" option and select the errors tab, it lists nothing but a bunch of Java exception errors and wrong css coding for the sites.
So what is going on?

Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Error while trying to customize Web Authentication

Hi,
i have tried to customize the web auth portal on a WLC running v5.2.110.0.
i have compressed the login files (images and html code) into .tar file with picozip and tried to download it to the controller.
i'm getting the following error:
*Feb 04 17:47:07.236: %UPDATE-3-FILE_OPEN_FAIL: updcode.c:2408 Failed to open file login.html.
*Feb 04 17:47:07.236: %OSAPI-3-FILE_OPEN_FAILED: osapi_file.c:469 Failed to open the file : /mnt/application/webauth_ramdisk/login.html.
-Traceback: 104b7590 10012724 1001015c 100148c8 104be944 10e42470 11033dec
Did anyone managed to customize the web auth portal?

Check if the path mentioned using the path statement is correct. If your image is in the root directory of the tftp server your path statement on the controller would be /. If the image is in the wireless directory of your tftp server then the path would be /wireless.

Error while trying to acsess web dynpro functionality.

Hi All,
My developer is trying to access a we-dynpro functionality. He ends up with the error.
I had a look at the threads for the error , The replies were to update to FQDN (fully qulaified domain name), But our installation is on a workgroup and not a domain installation.
I am not sure if changing the name of the system will help.I am afraid about the impact of chaning the name of physical server as FQDN.
The URL & the error log is as below,
http://olam-sapdev:8000/sap/bc/webdynpro/sap/appl_soap_management?sap-system-login-basic_auth=X&sap-client=200&sap-language=EN
Method: CHECK of program CX_FQDN=======================CP
Method: STARTUP_CHECKS of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
Error code: ICF-IE-http -c: 200 -u: SAPADMIN -l: E -s: COD -i: OLAM-SAPDEV_COD_00 -w: 0 -d: 20100611 -t: 181146 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Please help us if anyone had faced similar issue before.
Regards,
Vadivelan.N.

Hi,
Go to the transaction "sicf" and check that the following components are active:
-default_host ->sap ->public->bsp
-default_host ->sap ->public->bsp->sap->system
-default_host ->sap ->public->bsp->sap->htmlb
-default_host ->sap ->public->bsp->sap->public->bc
-default_host ->sap ->public->bc
-default_host ->sap ->public->bc->ur
-default_host ->sap ->bc->bsp->sap->system
-default_host ->sap ->bc->bsp->sap->public->bc
(To make this easier you can select on a higher node to activate all lower nodes as well). This should resolve your error.
regards,
Martin

Error while trying to view a procedure

Whenever I try to open a procedure in a package body, I'm getting an error which I never got while on version 1.5.3
Exact words of the error box that pops up
An error was encountered performing the requested operation:
ORA-00904: Invalid Column Name
00904.00000 - "%s: Invalid Identifier"
*Cause:
*Action:
Vendor Code 904
Database Version: Oracle9i Release 9.0.1.4.0
Please advise
Regards
SKG

Found An open discussion for the same issue.
posting it to that one.
Thanks
SKG

An error occurred: An error occurred while trying to view the document

Now my partner meet a trouble about opendocument API.
There are 2 servers : one is partner’s web server ,which partner’s application run in; other is BO server.
The above servers are running on different servers.
There is a web page A , which is running in partner’s web server.
Page A includes a iframe, whose source is BO documents running in BO server via opendocument API.
In Chrome, the page A work.
But in IE, the page A don’t work, then get the error “An error occurred: An error occurred while trying to view the document”
You can see error.jpg
I have written the sample page to re-produce this error.
You can change 1.txt to 1.jsp
Welcome your advice.

Hi,
if it works in Chrome then this Problem is related to IE.
Maybe the URL is to long? IE can "only" handle 2048 Characters.
Regards
-Seb.

ORA-00600: internal error code While trying to view cube

While trying to view cube, i encounter the following error
oracle.dss.dataSource.common.QueryRuntimeException: BIB-9509 Oracle OLAP did not create cursor.
oracle.express.idl.util.OlapiException: java.sql.SQLException: ORA-00600: internal error code, arguments: [xsLMapCrtAddPhrase01], [], [], [], [], [], [], [], [], [], [], []
ORA-06512: at "SYS.GENDEFINITIONMANAGERINTERFACE", line 42
ORA-06512: at line 1
oracle.dss.dataSource.common.OLAPException: BIB-9509 Oracle OLAP did not create cursor.
oracle.express.idl.util.OlapiException: java.sql.SQLException: ORA-00600: internal error code, arguments: [xsLMapCrtAddPhrase01], [], [], [], [], [], [], [], [], [], [], []
ORA-06512: at "SYS.GENDEFINITIONMANAGERINTERFACE", line 42
ORA-06512: at line 1
oracle.express.idl.util.OlapiException: java.sql.SQLException: ORA-00600: internal error code, arguments: [xsLMapCrtAddPhrase01], [], [], [], [], [], [], [], [], [], [], []
ORA-06512: at "SYS.GENDEFINITIONMANAGERINTERFACE", line 42
ORA-06512: at line 1
at oracle.dss.dataSource.common.QueryDataDirector.addDataDirectorListener(QueryDataDirector.java:795)
at oracle.dss.dataView.ModelAdapter.setDataDirector(ModelAdapter.java:173)
at oracle.dss.crosstab.CrosstabModelAdapter.setDataSource(CrosstabModelAdapter.java:54)
at oracle.dss.dataView.Dataview.setDataSource(Dataview.java:396)
at oracle.olap.awm.dataobject.dialog.olapi.UBiBeanUtil.getCrosstab(Unknown Source)
at oracle.olap.awm.dataobject.dialog.olapi.UBiBeanUtil.showCrosstab(Unknown Source)
at oracle.olap.awm.dataobject.dialog.olapi.UBiBeanUtil.showData(Unknown Source)
at oracle.olap.awm.navigator.node.olapi.UCubeNode.actionPerformed(Unknown Source)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(Unknown Source)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
This is with a simple cube with only one dimension. i had created the same cube earlier with 10 dimensions but same error occurred. i felt it had to do with my setup of the cube. I have recreated the cube a couple of times with different names but same error exists. interestingly all dimensions are viewable after maintenance.
I am begining to doubt the efficacy of AWM + oracle OLAP in use for a production environment. i have been at this for quite some time but no solution yet. please i would appreciate anyhelp

Have you ever had any cube working in this environment? yes. i had created multiple versions of the same cube with fewer dimensions. I had created a cube (USAGE) with 5 dimensions, it worked. I later created same cube with 10 dimensions, that was the Genesis of the error. i had exported the eif file, deleted the awm, reimpored the awm, same errors. recreated the cube same error. i even tried recreating the cube wih one dimension but the same error persists.
database is Release 11.1.0.7.0
AWM standalone client :awm11.1.0.7.0B

Excel service and OWA - getting ERROR while trying to open/edit Excel documents

Hi All,
We have configured SharePoint 2013 with Excel Service and OWA (Office Web Apps).
After configuring, we are able to view/edit Word or PowerPoint documents from the browser (as OWA is configured). But we are getting errors while trying to open/edit Excel documents.
We are not able to view/edit the excel workbook from the browser (through OWA).
To open the excel in the browser, decision has to be taken at the farm level on what to be used – Excel Service or OWA Server? Is it possible to do setting at site collection level?
Error details are given below:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 3/25/2013 1:29:08 PM
Event time (UTC): 3/25/2013 7:59:08 AM
Event ID: fc2e0530f493493896e6c8b6297a0423
Event sequence: 10
Event occurrence: 3
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/2/ROOT/x-1-130086717598089315
    Trust level: Full
    Application Virtual Path: /x
    Application Path: C:\Program Files\Microsoft Office Web Apps\ExcelServicesWfe\
    Machine name: VHYDMANTHSTP-02
Process information:
    Process ID: 1252
    Process name: w3wp.exe
    Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
    Exception type: ArgumentException
    Exception message: An entry with the same key already exists.
   at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
   at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
   at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Request information:
    Request URL:
http://mysrevr/x/_layouts/xlpreview.aspx?ui=en-US&rs=en-US&WOPISrc=http://myservernames1/_vti_bin/wopi.ashx/files/f36d669ceb814d67bdad0e1e1f98e466&wdSmallView=1
    Request path: /x/_layouts/xlpreview.aspx
    User host address: 10.81.138.92
    User:
    Is authenticated: False
    Authentication Type:
    Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
    Thread ID: 13
    Thread account name: NT AUTHORITY\NETWORK SERVICE
    Is impersonating: False
    Stack trace:    at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
   at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
   at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

I have the same issue while opening the file , i have checked every thing twice. but unable to fix this thing . can any one help.
One more thing which is i am wondering none of the MS representative replied on this post which is originally posted on March 27-2013.
is microsoft alive??
Imran Bashir Network Administrator MCP, JNCIA-EX,ER,JNIOUS +92-333-4330176

Error while trying to sync audio and video.

Suddenly out of the blue I'm have all sorts of problems with Logic 8. I keep getting the "error while trying to synchronize audio and midi" error message. Even when I'm just using using the audio side. Do you know of a local logic tech that could check out my system? Might be a problem with my motu 828mk11 audio interface or corrupt drivers, bad preferences. I'm unable to do any work in Logic until I get this problem solved.

(Did you do any upgrades with the Firewire plugged in?)
Usually a MOTU reset will fix this.
Follow these steps to restore the 828mkII to Factory Default Settings.
•Disconnect the firewire cable from the 828mkII
•Press the Setup knob
•Turn the Setup knob all the way to the right
•Press the Select knob
•Press the Value knob
•Power off the interface and plug the firewire cable back in
•Power the interface back on
http://www.motu.com/techsupport/technotes/document.2004-06-16.6405589976/view
If that doesn't work.
1) Unplug ALL cables from the 828MkII.
2) Double check that the power cord is really unplugged.
3. Switch the voltage switch on the side from your setting (110 in the US) to the other setting and back a few times.
4) Make sure you've set the voltage switch back to the right setting for your country.
5) Plug everything back in.
pancenter-

JCO.Server Error while trying to execute a RFC program from SAP

Hi,
We are connecting to an external registered server program from SAP via Web Methods.
The external server program is registered with the SAP Gateway. We have created a TCP/IP RFC destination and are able to connect to the destination successfully via SM59.
An RFC function is created in SAP and is called using the syntax CALL FUNCTION "/NGN/BAPI_STRE_SEARCH_PROCESS" DESTINATION 'PRDB2B'. We have also handled the COMM_FALIURE and SYSTEM_FALIURE exceptions in the function call.
We are monitoring the gateway via SMGW and see a connection log to the RFC destination as below
Number - 10
LUname - dev01
TPName - sapgw00
User - KRAORANE
Status - CONNECTED
Symbolic - PRDB2B
Conversation - 86520353
Prot - REG
SAP return code - 0
CPIC rtn code - 0
The external program returns results as expected.
However sometimes the RFC fails and returns the message JCO.Server could not create server function /NGN/BAPI_STRE_SEARCH_PROCESS.
We are not able to figure what exactly is causing this error. Any help will be highly appreciated.
-Kiran

Hi,
Please see the below links..
JCO.Server Error while trying to execute a RFC program from SAP
Re: JCO.Servcer could not find server function
Re: JCO.Server could not find server function 'SET_SLD_DATA'
/people/kathirvel.balakrishnan2/blog/2005/07/26/remote-enable-your-rfchosttoip-to-return-host-ip-to-jco
Re: interfacing SAP with an existing java applications
http://help.sap.com/saphelp_nw04/helpdata/en/47/80f671ee6e4b41b63c0fe46bd6e4f8/content.htm
http://www.sapgenie.com/faq/jco.htm
Regards
Chilla..

Error while trying to retrieve the task: EventId(complete) does not belong

Hi Experts,
I have created a process composer DC in which i have created a process with two human tasks.
Each tasks is binded with web dynpro Iviews (means followed all the steps neccesary).
I deploed the DC successfully. now i started the process and got a task in my UWL but on click of the task i got the below error.
Error while trying to retrieve the task: EventId(complete) does not belong to referenced component interface of ComponentUsage(com.sap.tc.bpem.wdui.appcontainer.containercomp.ContainerComp:com.infosys.mdm.LoadRepositoryComp, createOnDemand=false, childComponent=com.infosys.mdm.LoadRepositoryComp)
[EXCEPTION]
java.lang.IllegalArgumentException: EventId(complete) does not belong to referenced component interface of ComponentUsage(com.sap.tc.bpem.wdui.appcontainer.containercomp.ContainerComp:com.infosys.mdm.LoadRepositoryComp, createOnDemand=false, childComponent=com.infosys.mdm.LoadRepositoryComp)
I have rechecked the event that i have created in the component controller and Interface controller.
Can you please help me in debunging the error.
thanks
Narendra

Hi,
sounds like an program error. That is an problem which occurs if one or multiple components try to lock the same galaxy object at the same point in time. Did you configured something special on the given task? e.g deadlines?
My proposal is to open an Customer Message so that we can have a detailed look onto the system. If this is not possible could you please provide the complete trace file and some more details about the modeled task?
Best Regards
Andreas

VS 2010 error: 'Error while trying to run project: Not implemented'

I added a new Oracle database project using Oracle Tools for Visual Studio 2010. Once the Oracle database project is added to my Solution, my Visual Studio is no longer able to start the debugger and at times not able to run Test Cases. It error with 'Error while trying to run project: Not implemented'. If I unload the project, VS starts working fine.
Any idea on how to resolve this issue?

I ran into this problem as well, working in a VS2010 solution which included an ASP.NET web project and the v11.2.0.2.1 ODT version of the Oracle project.
Turns out that I was able to solve the problem by removing the Oracle project from the solution, and then adding it back in. From a SLN file point of view, it seems that as long as the Oracle SQL project is located after the Web Application Project that everything works fine.
Note that the SLN file is not organized by alphabetical project name, so changing the name of the SQL project doesn't help; its organized by order of project addition to the solution, so removing and re-adding is the way to go.

Error while trying to view web interface in browser

Similar Messages

Maybe you are looking for