Error while u ploading flat file

Hi, I m getting FES:007 error message while uploading the flat file please help

hi,
when i check the where-used-list of that message no, i get this
IF NOT ( strTemp CO strAllowedChars ).
        MESSAGE ID 'FES' TYPE 'E' NUMBER '007'
          RAISING BAD_DATA_FORMAT.
ENDIF.
and  strAllowedChars = '0123456789'.  and it varies
so your data has other characters than numbers......

Similar Messages

  • Error while loading CSV Flat file

    Hi,
    I am getting the following errors while loading a flat file into the DataSource:
    1. Error 'Unit CS is not created in language EN...' at conversion exit CONVERSION_EXIT_CUNIT_INPUT (field UNIT record 1, value CS)
    2. Error 'The argument '9,018.00' cannot be interpreted as anumber' on assignment field /BIC/ZTVSA record 1 value 9,018.00
    What can I do to correct this?
    Thanks

    I am taking the following (Headers) fields in this order in a CSV file :
    0LOGSYS     ,0MATERIAL,0UNIT,0BASE_UOM,0COMP_CODE,0PLANT,0FISCPER,0FISCVARNT,
    0CURRENCY,0PRICE_TYPE,ZTVSAKF,ZVOTVSKF,0PRICE_CTRL,ZPRICE_STKF,0PRICE_BASE,
    0VAL_CLASS,0CURTYPE,0VALUATION
    I have added all these fields in the DataSource as well. T-Code CUNIT has CS as a Unit. 
    I deleted and recreated the DataSource and am getting this error now:
    Error 'Unit CS is not created in language EN...' at conversion exit CONVERSION_EXIT_CUNIT_INPUT (field UNIT record 1, value CS)
    Error 'The argument '1,398.00' cannot be interpreted asa number' on assignment field /BIC/ZTVSAKF record 1 value 1,398.00
    Error 'The argument '8,10.00' cannot be interpreted as anumber' on assignment field /BIC/ZTVSKF record 1 value 8,10.00
    Error 'Unit 0 is not created in language EN...' at conversion exit CONVERSION_EXIT_CUNIT_INPUT (field BASE_UOM record 1, value )
    Error 'Unit CS is not created in language EN...' at conversion exit CONVERSION_EXIT_CUNIT_INPUT (field UNIT record 1, value CS)
    Error 'The argument '5,50.00' cannot be interpreted as anumber' on assignment field /BIC/ZTVSAKF record 1 value 5,50.00
    Does it matter what order the columns are in?

  • Error while buliding biztalk flat file schema

    Hi Everyone,
    am using a flat file schema i had imported a schemas.
    but when i bulit schemas solution am getting this error.
    Only one SchemaInfo, GroupInfo, RecordInfo or FieldInfo is allowed in the appInfo block

    Hi Rajiv,
    Your error is related is much more related to your own flat file where there is some restriction over grouping the record . 
    I would suggest to go through your Flat File Schema Wizard again to see is there inconsistency you have done while generating schema .
    I would also suggest you to look over below MSDN Articles
    Walkthrough: Creating a Flat File Schema From a Document Instance
    Creating Schemas Using BizTalk Flat File Schema Wizard
    BizTalk Server: Transform text files (Flat Files) into XML – by @Sandro
    Thanks
    Abhishek

  • Error while loading from Flat file

    Hi,
    I'm trying to load master data from a flat file. After loading I get the following message even though I have used PSA as staging area. I see that data is present in the master data table (Text) without any errors though. Kindly help.
    Error when updating Idocs in Business Information Warehouse
    Diagnosis
    Errors have been reported in Business Information Warehouse during IDoc update:
    EDI: Partner profile not available
    System response
    There are IDocs with incorrect status.
    Procedure
    Check the IDocs in Business Information Warehouse . You can get here using the BW Monitor.
    Removing errors:
    How you remove the errors depends on the error message you receive.

    Check your flat file format and field separator. Is it .txt or .csv file?
    Go to "Source systems" in "Modeling" chose your source system for flat files and perform check.
    Maybe problem is with your source system...
    This might also be due to logical names of the systems not being maintained. Also has anyone doen a flat file upload before this on the system and what is the version ?

  • Error while generating a flat file from oracle database

    i have imported three knowledge modules for the interafce.
    LKM SQL to SQL
    IKM SQL to FILE Append
    CKM oracle
    I have tried executing the interface in following ways
    1. checked the staging area different from target and choosed SUNOPSIS_MEMORY_ENGINE. three boxes appeared in the flow but i could not see any of the knowledge modules in the flow and i could not select form the drop down also.
    all the three boxes were showing the error.
    2. checked the staging area different from target and choosed a oracle logical schema. my flow has two boxes.
    For the source i have given LKM SQL to SQL and for target i have given IKM SQL to FILE append
    But the interface is erroring out while creating the load table... the error message is missing parameter
    IS there anything i have to do apart from this

    if your file ouput file has Date field,Numeric field then there is a chance for failure. Try making all the output fields as Varchar2.
    -app

  • FTP connection error whil,e using flat file adapter error

    while using file adapter in the reciever end for proxy to file
    i am giving  paranters like server IP address and the port , i dont know which port to give by default it is giving me 21 , anyway how to check whether the connection is correct
    and more over
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: ConnectException: Connection timed out: connect
    please help me in this thanks

    HI Sridhar ,
    First check wether server started or not and then check you are connecting to FTP server by
    go to run -> cmd and write ping and ipaddress which is used and see whether u r getting reponse from teh FTP server.
    Try to login to the ftp server which you have mentioned in CC using the user name and pwd, to chk whether you have the permissions to login to the server.
    Also the check whether the folder you are trying to access is having permission for delete/read/write.
    Restart the FTP server and try it again.
    Regards
    Sridhar Goli

  • Error message while uploading the flat file

    Hi Experts,
    I am getting the error message while uploading the flat file.
    Message class: MG
    Number: 147
    The message is: Several descriptions exist for the language JA.
    Please guide me why this error is occuring.
    Regards
    Akshay

    hi,
    how are you uploading the file and where ?
    u can use open dataset  , read dataset or gui_upload
    check this link
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/e92637c2cbf357e10000009b38f936/frameset.htm

  • Error 1 when loading flat file in BW 7.0

    Hi,
        The flat file structure is same as the transfer structure. Its a csv file and i also checked about the delimiters and stuff.The flat is not open and it is closed while i am loading it. The same file gets loaded if i try in another laptop with my id.If i use my colleague's id on my system also...it doest work...so, the basic problem is with my laptop. I know its nor related to type of data or transfer structure. Its some settings on my laptop which got changed automatically. If i install some other softwares like mozilla firefox or yahoo msg-will that create a problem? I am not at all understanding why its like this. Please help.The error msgs i get when i try to load the flat file -
    Error 1 when loading external data
    Diagnosis
    Error number 1 occurred when loading external data:
    1. Error when reading the file (access rights, file name, ...)
    2. File size or number of records does not correspond to the data in the control file
    3. Error when generating the IDoc
    4. File contains invalid data (errors with an arithmetic operation or data conversion)
    Procedure
    Check whether you have the required access rights and whether the data in the control file is correct (file names, record length, number of records, ...). Correct the data in the control file if necessary and check the data file for invalid data (values of the wrong type, values in the wrong format for conversion exit,...). Check whether the file has headers that have not been specified.
    Error when opening the data file C:\vikki1.csv (origin C)
    Message no.
    Diagnosis
    File C:\ vikki1.csv (origin C) could not be opened.
    Origin:
    A : Application server
    C : Client workstation
    Procedure
    Check whether the file entered exists and is not been used by other applications.

    Hi! Vikki,
    Error 1 means your flat file is open while uploading the data..
    your flat file should be closed while uploading data in BW.
    that is why it is saying "Error when opening the file..".
    first close that file n then upload..it will work.
    rest of the things are ok!..
    I hope this will help you.
    Regards,
    khyati.

  • Error while deploying a PAR file from NWDS into an ECC.

    Hi all,
    I am getting this error while deploying a PAR file from NWDS into an ECC.
    Operation Failed: Please make sure the server is running or check the log (sap-plugin.log) for
    more detail.
    My server is running properly
    1 - Where is sap-plugin.log file? I don´t find it. 
    2 - Could there be another file with another name with information about the error?
    3 - Is there another way to deploy the file directly from the ECC?
    Regards,

    Hi,
    Just make sure you have maintained correct server setting to check the same open the NWDS and follow this path
    Windows/ Prefereces / SAP Enterprise Portal
    Check the following enteries
    Alias
    Host
    Port
    Login etc.
    Regards,

  • APEX 4.0: error while opening a XLS file downloaded from interactive report

    Hi,
    I'm getting below error while opening a XLS file downloaded from an interactive report (APEX 4.0).
    "The file you trying to open, 'customer_2.xls', is in a different format than specified by the file extension.
    Verify that the is not corrupted and is from a trusted source before opening file. Do you want to open file."
    Yes No Help
    May be this one Apex 4.0 issue.
    please help me.
    Thanks
    Mukesh

    Hi,
    is the next part of the code correct.
    What i mean is packing of the attachment, finding out the size of pdf file and doc type as PDF.
    You can also try below link..
    Link: [http://wiki.sdn.sap.com/wiki/display/Snippets/SENDALVGRIDASPDFATTACHMENTTOSAPINBOXUSINGCLASSES]
    Hope this helps.
    Regards,
    -Sandeep

  • Error While uplaoding a EXCEL file in Web dynpro - HR_KR_XSTRING_TO_STRING

    Hi,
        I am getting an error while uploading an excel file in web Dynpro application. i am using the HR_KR_XSTRING_TO_STRING this function. I am getting the following error message 'Unable to interpret    as a number'.

    First of all, are you sure you know what you are working with here.  If this is standard Excel file in the Microsoft binary/propriatery format there is not function module or class in ABAP that can magically just transform this to a character string.  You should search the forums as this has been discussed extensively.  On that topic, please also do not post duplicate threads.  I have already locked your other thread with the same basic question.
    Instead of the binary/propriatery format of Excel, the file should be saved on the client as a text based format - like XML or Text Tab Delimited. You can then use several different options on the server to convert the XSTRING to STRING and process the content (becuase it was text based to begin with).  You could use CL_BCS_CONVERT, the function modules in the function group SCMS_CONV, or the class CL_ABAP_CONV_IN_CE.

  • Error while accessing secure store: File "SecStore.properties" does not exi

    Hi ,
    I have a java desktop application, and i am trying to get a connection from a datasource deployed on one SAP AS Java, I can get the datasource succsfullly but when i try to get a connection from the DS, it throughs this exception, I put the secstore..properties file in the classpath even after that it is not happy,
    any solution/hint/light please!!!!
    com.sap.sql.log.OpenSQLException: Error while accessing secure store: File "SecStore.properties" does not exist although it should..
         at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:106)
         at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:145)
         at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:226)
         at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:197)
         at com.sap.customcode.ConflictingActionFixture.(ConflictingActionFixture.java:53)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
         at java.lang.reflect.Constructor.newInstance(Unknown Source)
         at java.lang.Class.newInstance0(Unknown Source)
         at java.lang.Class.newInstance(Unknown Source)
         at fit.FixtureClass.newInstance(Unknown Source)
         at fit.FixtureLoader.instantiateFixture(Unknown Source)
         at fit.FixtureLoader.instantiateFirstValidFixtureClass(Unknown Source)
         at fit.FixtureLoader.disgraceThenLoad(Unknown Source)
         at fit.Fixture.loadFixture(Unknown Source)
         at fit.Fixture.getLinkedFixtureWithArgs(Unknown Source)
         at fit.Fixture.doTables(Unknown Source)
         at fit.FitServer.process(Unknown Source)
         at fit.FitServer.run(Unknown Source)
         at fit.FitServer.main(Unknown Source)
    Caused by: com.sap.security.core.server.secstorefs.FileMissingException: File "SecStore.properties" does not exist although it should.
         at com.sap.security.core.server.secstorefs.StorageHandler.openExistingStore(StorageHandler.java:372)
         at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:1946)
         at com.sap.sql.connect.OpenSQLConnectInfo.getStore(OpenSQLConnectInfo.java:802)
         at com.sap.sql.connect.OpenSQLConnectInfo.lookup(OpenSQLConnectInfo.java:783)
         at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:209)
         ... 18 more
    caused by

    the SecStore.key file was not there, I changed the passwd and checked the 'Encryption' on, after that my sever instance is not starting.
    Any idea?
    -Puneet

  • Logminer error while creating a dictionary file

    Hi ,
    I am working on logminer.
    i got the following error while creating a dictionary file :--
    please help me out.
    SQL> show parameter utl_
    NAME TYPE VALUE
    utl_file_dir string $ORACLE_BASE/utl_file/cecms
    SQL> execute dbms_logmnr_d.build(dictionary_filename => 'dictionary.ora',dictionary_location => '/u00/oracle/utl_file/cecms');
    BEGIN dbms_logmnr_d.build(dictionary_filename => 'dictionary.ora',dictionary_location => '/u00/oracle/utl_file/cecms'); END;
    ERROR at line 1:
    ORA-01336: specified dictionary file cannot be opened
    ORA-29280: invalid directory path
    ORA-06512: at "SYS.DBMS_LOGMNR_D", line 928
    ORA-06512: at "SYS.DBMS_LOGMNR_D", line 2052
    ORA-06512: at line 1
    Asif

    ORA-01336: specified dictionary file cannot be opened
    Cause: The dictionary file or directory does not exist or is inaccessible.
    Action: Make sure that the dictionary file and directory exist and are accessible.
    Probably an issue with the rights on the directories.
    To confirm the same, try writing a sample procedure with UTL_FILE to create a file at this location and capture the error. It will give you more details about the problem.

  • Error while importing a dump file in my local database

    Hi,
    I have a dump file named *"system_21Sep2010_DVSD.DMP"* which i'm trying to import in my local database named *"nandita1"*.
    The dump file is found under the following path *"C:\DevSuiteHome_1\BIN"* and i executed the following command for importing the dump file:
    C:\DevSuiteHome_1\BIN>imp system/system@nandita1 FILE=system_21Sep2010_DVSD.DMP FULL=YES
    I'm getting the following error while importing the dump file:
    Import: Release 10.1.0.4.2 - Production on Wed Oct 6 16:25:37 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc
    tion
    With the Partitioning, OLAP and Data Mining options
    Export file created by EXPORT:V10.01.00 via conventional path
    import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
    IMP-00015: following statement failed because the object already exists:
    "CREATE UNDO TABLESPACE "UNDOTBS1" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DV"
    "SD/undotbs01.dbf' SIZE 104857600 AUTOEXTEND ON NEXT 5242880 MAXSIZE "
    "32767M EXTENT MANAGEMENT LOCAL "
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLESPACE "SYSAUX" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/sysa"
    "ux01.dbf' SIZE 367001600 AUTOEXTEND ON NEXT 10485760 MAXSIZE 32767M "
    "EXTENT MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT SEGMENT SPACE MANA"
    "GEMENT AUTO"
    IMP-00015: following statement failed because the object already exists:
    "CREATE TEMPORARY TABLESPACE "TEMP" BLOCKSIZE 8192 TEMPFILE '/oradata_dev/D"
    "VSD/temp01.dbf' SIZE 20971520 AUTOEXTEND ON NEXT 655360 MAXSIZE 3276"
    "7M EXTENT MANAGEMENT LOCAL UNIFORM SIZE 1048576"
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLESPACE "USERS" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/users"
    "01.dbf' SIZE 5242880 AUTOEXTEND ON NEXT 1310720 MAXSIZE 32767M EXTEN"
    "T MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT SEGMENT SPACE MANAGEMEN"
    "T AUTO"
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLESPACE "XX_DATA" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/XX_"
    "DATA01.dbf' SIZE 140509184 AUTOEXTEND ON NEXT 1048576 MAXSIZE 32767M"
    " EXTENT MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT "
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLESPACE "XX_INDEX" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/XX"
    "_INDEX.dbf' SIZE 93323264 AUTOEXTEND ON NEXT 1048576 MAXSIZE 32767M "
    "EXTENT MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT "
    IMP-00015: following statement failed because the object already exists:
    "CREATE PROFILE "MONITORING_PROFILE" LIMIT COMPOSITE_LIMIT DEFAULT SESSIONS_"
    "PER_USER DEFAULT CPU_PER_SESSION DEFAULT CPU_PER_CALL DEFAULT LOGICAL_READS"
    "_PER_SESSION DEFAULT LOGICAL_READS_PER_CALL DEFAULT IDLE_TIME DEFAULT CONNE"
    "CT_TIME DEFAULT PRIVATE_SGA DEFAULT FAILED_LOGIN_ATTEMPTS UNLIMITED PASSWOR"
    "D_LIFE_TIME DEFAULT PASSWORD_REUSE_TIME DEFAULT PASSWORD_REUSE_MAX DEFAULT "
    "PASSWORD_LOCK_TIME DEFAULT PASSWORD_GRACE_TIME DEFAULT"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "OUTLN" IDENTIFIED BY VALUES '4A3BA55E08595C81' TEMPORARY TABLE"
    "SPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "TSMSYS" IDENTIFIED BY VALUES '3DF26A8B17D0F29F' DEFAULT TABLES"
    "PACE "USERS" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "ANONYMOUS" IDENTIFIED BY VALUES 'anonymous' DEFAULT TABLESPACE"
    " "SYSAUX" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "OLAPSYS" IDENTIFIED BY VALUES '3FB8EF9DB538647C' DEFAULT TABLE"
    "SPACE "SYSAUX" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "MDDATA" IDENTIFIED BY VALUES 'DF02A496267DEE66' DEFAULT TABLES"
    "PACE "USERS" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "SYSMAN" IDENTIFIED BY VALUES '28F72A3C2D75FDE9' DEFAULT TABLES"
    "PACE "SYSAUX" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "MGMT_VIEW" IDENTIFIED BY VALUES '442167C25FAC883C' TEMPORARY T"
    "ABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "SCOTT" IDENTIFIED BY VALUES 'F894844C34402B67' DEFAULT TABLESP"
    "ACE "USERS" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "BUXXDDWA" IDENTIFIED BY VALUES '2672292A792DB64B' DEFAULT TABL"
    "ESPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXDDWA" IDENTIFIED BY VALUES 'F5C178B2796496F4' DEFAULT TABLES"
    "PACE "XX_INDEX" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "BUXXDDWS" IDENTIFIED BY VALUES '06D47E0665132890' DEFAULT TABL"
    "ESPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "BUXXSUC" IDENTIFIED BY VALUES '1705C688518ADCDC' DEFAULT TABLE"
    "SPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "JIRAUSER" IDENTIFIED BY VALUES 'F0E1C662FCD1E09F' DEFAULT TABL"
    "ESPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXSFA" IDENTIFIED BY VALUES 'C3DFA37A29E072B6' DEFAULT TABLESP"
    "ACE "XX_INDEX" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXDDW" IDENTIFIED BY VALUES 'CFF3D9B1B6C20DCC' DEFAULT TABLESP"
    "ACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXDDWS" IDENTIFIED BY VALUES '9EF0EE1BAC5855C4' DEFAULT TABLES"
    "PACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXSUC" IDENTIFIED BY VALUES '39594B53A6F1CED0' DEFAULT TABLESP"
    "ACE "XX_INDEX" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "SELECT_CATALOG_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "SELECT_CATALOG_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "EXECUTE_CATALOG_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "EXECUTE_CATALOG_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "DELETE_CATALOG_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "DELETE_CATALOG_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "RECOVERY_CATALOG_OWNER""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "RECOVERY_CATALOG_OWNER" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "GATHER_SYSTEM_STATISTICS""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "GATHER_SYSTEM_STATISTICS" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "LOGSTDBY_ADMINISTRATOR""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "LOGSTDBY_ADMINISTRATOR" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "AQ_ADMINISTRATOR_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "AQ_USER_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "AQ_USER_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "GLOBAL_AQ_USER_ROLE" IDENTIFIED GLOBALLY "
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "SCHEDULER_ADMIN""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "SCHEDULER_ADMIN" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "HS_ADMIN_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "HS_ADMIN_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "AUTHENTICATEDUSER""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "AUTHENTICATEDUSER" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "OEM_ADVISOR""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "OEM_ADVISOR" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "OEM_MONITOR""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "OEM_MONITOR" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "WM_ADMIN_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "WM_ADMIN_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVAUSERPRIV""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVAUSERPRIV" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVAIDPRIV""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVAIDPRIV" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVASYSPRIV""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVASYSPRIV" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVADEBUGPRIV""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVADEBUGPRIV" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "EJBCLIENT""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "EJBCLIENT" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVA_ADMIN""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVA_ADMIN" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVA_DEPLOY""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVA_DEPLOY" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "CTXAPP""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "CTXAPP" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "XDBADMIN""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "XDBADMIN" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "XDBWEBSERVICES""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "XDBWEBSERVICES" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "OLAP_DBA""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "OLAP_DBA" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "OLAP_USER""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "OLAP_USER" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "MGMT_USER""
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "MVIEW$_ADVSEQ_GENERIC" MINVALUE 1 MAXVALUE 4294967295 INCR"
    "EMENT BY 1 START WITH 1 CACHE 50 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "MVIEW$_ADVSEQ_ID" MINVALUE 1 MAXVALUE 4294967295 INCREMENT"
    " BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "LOGMNR_EVOLVE_SEQ$" MINVALUE 1 MAXVALUE 999999999999999999"
    "999999999 INCREMENT BY 1 START WITH 1 CACHE 20 ORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "LOGMNR_SEQ$" MINVALUE 1 MAXVALUE 9999999999999999999999999"
    "99 INCREMENT BY 1 START WITH 1 CACHE 20 ORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "LOGMNR_UIDS$" MINVALUE 1 MAXVALUE 999999999999999999999999"
    "999 INCREMENT BY 1 START WITH 100 CACHE 20 ORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_FLAVORS_S" MINVALUE -2147483647 MAXVALUE 214748364"
    "7 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_FLAVOR_NAME_S" MINVALUE 1 MAXVALUE 999999999999999"
    "999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_REPPROP_KEY" MINVALUE 1 MAXVALUE 99999999999999999"
    "9999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT_LOG_SEQUENCE" MINVALUE 1 MAXVALUE 99999999999999999"
    "9999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_REFRESH_TEMPLATES_S" MINVALUE 1 MAXVALUE 999999999"
    "999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_USER_AUTHORIZATIONS_S" MINVALUE 1 MAXVALUE 9999999"
    "99999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMPLATE_REFGROUPS_S" MINVALUE 1 MAXVALUE 99999999"
    "9999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMPLATE_OBJECTS_S" MINVALUE 1 MAXVALUE 9999999999"
    "99999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMPLATE_PARMS_S" MINVALUE 1 MAXVALUE 999999999999"
    "999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_USER_PARM_VALUES_S" MINVALUE 1 MAXVALUE 9999999999"
    "99999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMPLATE_SITES_S" MINVALUE 1 MAXVALUE 999999999999"
    "999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMP_OUTPUT_S" MINVALUE 1 MAXVALUE 999999999999999"
    "999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_RUNTIME_PARMS_S" MINVALUE 1 MAXVALUE 9999999999999"
    "99999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "TEMPLATE$_TARGETS_S" MINVALUE 1 MAXVALUE 99999999999999999"
    "9999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_EXCEPTIONS_S" MINVALUE 1 MAXVALUE 9999999999999999"
    "99999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    . importing OLAPSYS's objects into OLAPSYS
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "OLAP_ID_SEQ" MINVALUE 1 MAXVALUE 9999999999999999999999999"
    "99 INCREMENT BY 1 START WITH 122 NOCACHE NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "OLAP_IRID" MINVALUE 1 MAXVALUE 999999999999999999999999999"
    " INCREMENT BY 1 START WITH 24 NOCACHE ORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "CWM2_OLAP_ENABLESEQ" MINVALUE 1 MAXVALUE 9999 INCREMENT BY"
    " 1 START WITH 1 NOCACHE ORDER CYCLE"
    I've been waiting for hours, but still it is blocked at the same place, that is:
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "CWM2_OLAP_ENABLESEQ" MINVALUE 1 MAXVALUE 9999 INCREMENT BY"
    " 1 START WITH 1 NOCACHE ORDER CYCLE"
    I've tried recreating the database, but still the error is the same.
    I've tried including the ignore=Y, that is:
    C:\DevSuiteHome_1\BIN>imp system/system@nandita1 FILE=system_21Sep2010_DVSD.DMP
    FULL=YES IGNORE=YES
    The error generated is as displayed below:
    Import: Release 10.1.0.4.2 - Production on Wed Oct 6 16:34:04 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc
    tion
    With the Partitioning, OLAP and Data Mining options
    Export file created by EXPORT:V10.01.00 via conventional path
    import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
    . importing OLAPSYS's objects into OLAPSYS
    Over here also, i had to kill the process since it was blocked at the following statement: ". importing OLAPSYS's objects into OLAPSYS"
    Please can someone help me out.
    Thanking in advanced

    plzzzzzzzzzzzzzzzzz.............sme1 help me out

  • Error while loading the WSLD file

    Hi all
    I am trying to consume a Webservice. When i try to create the Model out of the WSDL file, it says "Error while loading the WSDL file".
    Its an XI webservice, so i cannot view it from Webservice navigator.
    How could i find out that, the problem is with the Webservice or i am missing any thing
    Kindly help
    regards
    Deepu

    Hi
    I checked the log and i am getting the following exceptions
    1.DynamicProxy.TempDir=C:\DOCUME1\DEEPUM1\LOCALS~1\Temp\, DynamicProxy.INetProxy.Host=}'
         at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:413)
    Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.WebserviceClientException: GenericServiceFactory initialization problem. Could not load web service model.
    2. Caused by: com.sap.engine.lib.xml.util.NestedException: IO Exception occurred while parsing file:Invalid Response Code: (401) Unauthorized. The requested URL was:"http://Pinnacle:50000/XISOAPAdapter/MessageServlet?channel=:PowerEP_BusService:Out_SOAP_DocViewDownload" -> com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL
    3. java.lang.NullPointerException
         at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DOperationImpl.initParameters_DocumentStyle(DOperationImpl.java:59)
    Is this any authorization problem
    regards
    Deepu

Maybe you are looking for