Error while unmarshalling the IDOC using an IDOC OTD in JCAPS

Hi,
I've created an OTD from SAP IDOC Type in SeeBeyond JCAPS 5.1.2. And when I'm trying to unmarshal the IDOC payload using OTD tester in eDesigner. And the same error is thrown at runtime also. I've tried with multiple IDOCs but no use. And when I navigate to the column number (shown in error message), always it shows stops at same segment. I don't know why. The error message thrown is
"There was an error during unmarshal.
less than 1 occurrences! Column Number [30289]"Can any one help me?
Thanks in advance
Satya Krishna

It looks like the control data for the child segment is not getting populated. you have to find the code which populated the control data and see if it is doing what it should.

Similar Messages

Error while uploading the data Using LSMW - Idoc method

Hi Experts,
I am working on LSMW using Idoc method. Till 12th step (Display converted data) i wasn't got any problem. For the Idoc method, I have to specify details to Idoc inbound processing from the menu settings.
In that screen I have to specify file port, partner type and partner no. I have created a file port ZFILE. Can u tell me what ahould I pass in that screen? Where should be the file i.e in the application server or presentation server? What should be the directory and function module. Can u provide step by step?
After that I have to specify partn.type. What should I select for that?
After that I have to specify partner no. Whether it is inbound or outbound?
I got No data found for the following detials.
port - ZFILE
in the inbound file tab, e:\ as physical directory; EDI_PATH_CREATE_USERNAME as function module.
Partner type - US
Parnter no. - LSMW with the inbound parameters message type - MATMAS and Process code - MATM.
Please tell me how can I upload properly? Please don't ignore as i am asking same question again becasue I have gone through related threads also. But i didn't find the exact requirement.
proper documentation will be rewarded.
Thanks in Advance.
James.

Hello,
I could identify the error. It was due to incorrect UOM. Problem resolved.
Thanks,
Madhura

Error while uploading the data using FM"upload"

Hi,
I encountering an error while uploading the data using text file with FM " UPLOAD"
The error is "File does not exist or cannot be opened "
But there is a file with name and extenstion right.
Regards
Vishnu

You have to create RC29P-IDNRK(var) using concatenate statement. Try this.
DATA: new_mark TYPE bdcdata-fnam.
CONCATENATE 'RC29P-IDNRK(' var ')' INTO new_mark.
PERFORM bdc_field USING new_mark W_BOM-QTY

Getting Error while accessing the data using odata service

Hi All,
Iam new to SAP FIORI.
Iam getting the below error while accessing the data using odata service.
"Failed to load resource: the server responded with a status of 404 (Not found)"
"No 'Access-Control-Allow-Origin' header is present on the requested resource. Origin "
i have tried all the solutions like changing the url pattern "proxy/htttp".
and disabled - security in chrome (Chrome is Updated version).
i tried with IE still got the same problem.
And installed all the required software in eclipse
While installing GWPA plugin i got the following error.
let me know if any one have idea.
Thanks in advance.

> Do you want to add and/or update the data in the already existing tables or do you want to replace the content completely?
>
> so in that way :
> bot the options are fine what ever take less time.
Sorry mate, but YOU have to know what you want here.
I gave you an easy to follow set of steps.
As you don't seam to mind the outcome, just might just use them...
> I wanted to know weathe i can use the loadercli for thie export import or not? if yes then is there any new steps to do before i do the export import?
We had this discussion before...
>
> For that the easiest option would be just to drop the tables of SAPR3 and run the import again.
>
> For ease of use you could also just do:
> - logon as superdba
> - drop user SAPR3
> - create user SAPR3 password SOMEPW not exclusive dba
>
> After these steps you can easily pump the data into the database again.
>
> So here in th above given steps , i am creating a new SAPR3 user and why it is not exclusive dba ?
> i already have that user SAPR3 can i use the same.
Yes, you do have the SAPR3 user.
But you don't seem to like to read documentation or learn about how the tools work or anything like that.
Therefore I gave you s simple way to reach your goal.
Of course it's possible to reuse the user.
But then you would have to deal with already existing tables, already existing data etc.
You don't seem to be able to do that. So, the easy steps might be better suited for your needs.
regards,
Lars

Error while starting the OA using opmnctl

HI,
Am a Beginner on OAS.Am facing a error while starting the application using ./opmnctl startall.
opmnctl: starting opmn and all managed processes...
Failed to get IP for localhost (1)
Failed to get IP for localhost (1)
Failed to get IP for localhost (1)
opmnctl: opmn start failed
Not able to select the components using console.
Can you help me to resolve
Edited by: Tarunkudikala on Feb 26, 2009 3:25 AM

Why not better put that info ???
If you are installing Oracle Application Server in a DHCP network you must use a loopback configuration. To access the Oracle Application Server, you need to use a local browser. Perform the following steps to install Oracle Application Server in a DHCP network:
1.
Find the IP address allocated from the DHCP server by running the following command:
$ /sbin/ifconfig -a
The IP address is associated with the interface configured to use DHCP.
2.
Configure the host to resolve hostname to loopback IP address:
1.
Configure the host to resolve hostname to loopback IP address, by modifying the /etc/hosts file to contain the following entries:
127.0.0.1 hostname.domainname hostname
127.0.0.1 localhost.localdomain localhost
2.
Check that the hostname resolves to the loopback IP address by entering the following command:
$ /bin/ping hostname.domainname
----------------------

TSV_TNEW_PAGE_ALLOC_FAILED error while loading the DATA using DTP

Hi,
While loading the data using DTP for 2 DSO's we are gettig the error
TSV_TNEW_PAGE_ALLOC_FAILED
can any one kindly help me out regarding the same.
Thank You,
Poornima.

Hi Soundarya,
Thanks a lot for the reply. But i found that its running fine in development, where as coming to quality its throwing an error. These happened for Two DSO's. In both the transformations i have identified that the Transformation names are different from Development and Quality..
There are no routines written for them and no select statements have been used
Can you please suggest me regarding the same.
Edited by: Poornima Gayatri on Mar 22, 2010 7:00 AM

Error while crating Sales Order using ALE-IDoc?

Hi all,
I have developed an ALE-Idoc interface to create Sales Order automatically When the user created a purchase order. It is working fine since past two months.
But now one SO is not created and the error message in Inound idoc is 'Sales Area not defined' message no V1316.
The material used in Po creation is created recently and using first time . i am expecting the problem is with in this material because the PO's created based on other materials is still creating the SO successfully.
Please help me in solving this problem?
Thanks,
Vamshi.

Hi shan ,
Thanks for you reply. The sales area for customer and vendor is maintained in VOE2 and taking correctly for other materials except for the new material.
Also in Inbound IDoc which contains the error is having correct sales area in it's segment . But showing that in the error message as 'sales area & & & is not defined' here the sales area is wrong one it is dispalying.
so please help me on identifying the problem?
Thanks,
vamshi.

Error while creating the ASSET using LSMW BAPI method ( BUS1022 )

Hello,
Im creating assets using the below LSMW BAPI method
Business Object      BUS1022
Method                     CREATEINCLVALUES
Message Type         FIXEDASSET_CREATEINCLVALU
Basic Type              FIXEDASSET_CREATEINCLVALU
the following errors were triggered while populating the values to ACQ_VALUE and ORD_DEP value.
Correction to ordinary dep. greater than acc. dep. in area 01
Correction to ordinary dep. greater than acc. dep. in area 30
Correction to ordinary dep. greater than acc. dep. in area 31
Correction to ordinary dep. greater than acc. dep. in area 32
if i pass only ACQ_VALUE, I am able to create the asset with out any issues.
Can you guys plz guide me to fix this issue to create the asset with both ACQ_VALUE and ORD_DEP values??
Cheers,
Sriram.

Hello,
Review AO21.
Regards
Waza

Error while running the rdf using concurrent program

Hi All,
I am facing the following error when i try to run the concurrent program
REP-0736: There exist uncompiled program unit(s).
REP-1247: Report contains uncompiled PL/SQL.
I am using a package in the program units. when i ues it the database its working fine. but when i use in the rdf.
it is throwing the above error.
Also the rdf is scuccessfully compiled.
Please let me know what should be done now??
Thanks
Jana

close report builder,
re-open
re-connect
open pgm unit procedure
compile each pgm unit individually
then ctrl+shift+k
ctrl+t
try now
CHK THIS LINK...may be while running, the user wont have access to the tables used in packages...
REP-1247 ERROR WHILE RUNNING REPORT
Edited by: Dora on Dec 15, 2009 10:00 AM

Getting error while running the Interface using AGENT

Hi All,
i am not able to run the interface using Agent service which running in the another machine, while running i am getting error message like
java.lang.Exception: Error during Session launching
     at com.sunopsis.dwg.dbobj.SnpSession.remoteExecute(SnpSession.java)
     at com.sunopsis.graphical.l.or.e(or.java)
     at com.sunopsis.graphical.r.z.actionPerformed(z.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
i ran the Agent services in Comment prompt, there i am getting the error like follows
java.lang.NullPointerException
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.prepare(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.t(e.java)
at com.sunopsis.dwg.cmd.h.y(h.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
here i have mentioned the steps which i followed for creating agent service.
i have two machine namely A and B both having the ODI
i am going to use the B machine as a centralized server. so i edited the odiparams.bat file in B machine in ODI locaiton and filled the repository information
from A machine i opened the Topology and created the Agent service there i mentioned the HOST name as "B" and port number 20300. and i configure the logical agent aswell
from B machine i started the Agent service like agentscheduler "-port=20300".
Agent service launched seccessfully.
From A machine i tested the Agent. that also shown the successful window message.
then i started running the interface using the agent i am getting the error which i have mention in the beginging.
Interface which i ran will do the text file to table loading, so i kept that file in particular location in B machine( i have configure this location when i created the file data store in topology in A machine).
Please help me to solve the problem...
thanks
nidhi
Edited by: knidhi on Nov 26, 2009 6:54 PM

Thanks For your Reply,
I ran the agent as you said. here is my observation
from the Machine B where agent is actually running, i could able to run the interface using agent service.
but from the machine A while running the interface i am getting the following error message
java.lang.Exception: Error during Session launching : Error during Session Preparation : You are trying to execute a session with an agent that is undefined in your repository. Please check the agent -NAME parameter.
     at com.sunopsis.dwg.dbobj.SnpSession.remoteExecute(SnpSession.java)
     at com.sunopsis.graphical.l.or.e(or.java)
     at com.sunopsis.graphical.r.z.actionPerformed(z.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.AbstractButton.doClick(Unknown Source)
     at javax.swing.plaf.basic.BasicMenuItemUI.doClick(Unknown Source)
     at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
i have created both physical and logical agent with the same name "DEMO_AGENT", and i ran the agent in the Machine B like
agentscheduler "-port=20301" "-name=DEMO_AGENT"
Please help me to solvethe issue...
Thanks
Nidhi
Edited by: knidhi on Nov 27, 2009 11:04 AM
Edited by: knidhi on Nov 27, 2009 11:04 AM
Edited by: knidhi on Nov 27, 2009 11:05 AM

Error while running the code using jvm but its working fine with eclipse3.0

Hi Everyone,
I have a problem while building xml document.
I have developed my java files using IBM Eclipse 3.0 and i had no problem while executing the files.
But while i am trying to execute the same code in jdk/bin, xml document is not working..
No error encountered while compiling but while executing when i try to print the xml string it just gives the root element name like [root : null]
Can anyone suggest some solution?Its urgent please....

since i didnt get any reply when i posted it at http://forum.java.sun.com/thread.jspa?threadID=723865
i have posted my pbm in the forum.
Anyways i never got a reply back for neither of my posts.

Error while attaching the document using Method add_attachment

Hello Friends,
We are getting an error while using the BCS Class Method for attaching the documents to the mail.
We are using method: add_attachment()
For this I am passing the parameters:
attachment_type: PDF
attachment_subject: XXXXXXX
att_content_hex: content_hex[] "Internal table
The system is throwing error message X_ERROR.
Friends please help me in how to rectify the error message.
Thanks and Regards
Pradeep Goli

Hi,
Please code as below.
data: binary_content type solix_tab.
CALL METHOD Document->add_attachment EXPORTING i_attachment_type = u2018PDFu2019
i_attachment_subject = u2018My attachmentu2019 i_att_content_hex =
binary_content.
Regards
chitra

Error while uploading the logo using se78

Hi All,
I am using se78 tansaction to upload the company logo.i save the file as .bmp on desktop.while importing the file its giving me an error that file format is not valid.Please tell me which format should i use to upload the logo.
Regards
lalit

Hi,
There are 2 ways of getting images into SAP. One is uploading as Graphics; in this case, BMP should work just fine. Or you can import the image as Standard text, in which case you need to convert it to TIFF baseline 6.0 format, uncompressed. Use a specialized software such as Corel, etc.
Regards,
Claudiu

Error while sending the data using input schedule

Dear Friends,
I am unable to send the data using input schedule due to following error is occur while sending the data.
The Error Message : Member (H1) of dimension (ENTITY) is not a base member (parent or formula)
Can anyone please help me to resolve the above error.
Thanks and regards,
MD.

Hi,
You are trying to send data to a parent/node, you can only send data in BPC to lowest-level children (base mamabers) of any dimension.
"H1" is a parent in the entity dimension so you should try sending to a child.
Tom.

Getting error while importing the data using loadercli

Hello,
I want to copy the data using export/ import via (loadercli).
scenario:
1) I have 2 server and i want to export data from old server and import in to new MAXDB server using loadercli.
I have done this once and it went fine , but now I want to do the export import again so i will have te latest data on the new server.
when i tried to do that it gives error that the table already exist . Can i use loadercli to import hte data again ?
can any one help me in this ?
Regards,
Bhavesh

> Do you want to add and/or update the data in the already existing tables or do you want to replace the content completely?
>
> so in that way :
> bot the options are fine what ever take less time.
Sorry mate, but YOU have to know what you want here.
I gave you an easy to follow set of steps.
As you don't seam to mind the outcome, just might just use them...
> I wanted to know weathe i can use the loadercli for thie export import or not? if yes then is there any new steps to do before i do the export import?
We had this discussion before...
>
> For that the easiest option would be just to drop the tables of SAPR3 and run the import again.
>
> For ease of use you could also just do:
> - logon as superdba
> - drop user SAPR3
> - create user SAPR3 password SOMEPW not exclusive dba
>
> After these steps you can easily pump the data into the database again.
>
> So here in th above given steps , i am creating a new SAPR3 user and why it is not exclusive dba ?
> i already have that user SAPR3 can i use the same.
Yes, you do have the SAPR3 user.
But you don't seem to like to read documentation or learn about how the tools work or anything like that.
Therefore I gave you s simple way to reach your goal.
Of course it's possible to reuse the user.
But then you would have to deal with already existing tables, already existing data etc.
You don't seem to be able to do that. So, the easy steps might be better suited for your needs.
regards,
Lars

Error while precompiling the JSP using weblogic 7.0

Hi
I am trying to precompile jsp file which is there in a war.Main jsp file code includes one more jsp which is there in other folder under defaultweb directory.
While deploying the war i am getting the following error.Can any bosy help me in this regard
<Nov 23, 2002 5:01:28 PM IST> <Error> <HTTP> <101045> <[ServletContext(id=464413
3,name=ArkinTestWeb,context-path=/ArkinTestWeb-3)] translation of /Admin/account
_access.jsp failed: weblogic.utils.ParsingException: nested TokenStreamException
: antlr.TokenStreamException: Could not include ./../includes/sessionStatusPage.
jsp>
<Nov 23, 2002 5:01:28 PM IST> <Error> <Deployer> <149201> <The Slave Deployer fa
iled to complete the deployment task with id 1 for the application ArkinTestWeb.
weblogic.management.ApplicationException: Prepare failed. Task Id = 5
Module Name: ArkinTestWeb, Error: Could not load ArkinTestWeb: weblogic.utils.Ne
stedException: ArkinTestWeb:ArkinTestWeb Failure while Precompiling JSPs: weblog
ic.utils.ParsingException: nested TokenStreamException: antlr.TokenStreamExcepti
on: Could not include ./../includes/sessionStatusPage.jsp - with nested exceptio
n:
[weblogic.utils.ParsingException: nested TokenStreamException: antlr.TokenStream
Exception: Could not include ./../includes/sessionStatusPage.jsp]
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContain
er.java:657)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContain
er.java:548)
at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(Sla
veDeployer.java:1026)
at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDep
loyer.java:700)
at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHan
dler.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)
>
Regards
Anand Mohan

Hi
All jsp pages are under one web application only.Can you help more on this.
Regards
Anand

Error while unmarshalling the IDOC using an IDOC OTD in JCAPS

Similar Messages

Maybe you are looking for