Error while updating decimal places in general settings

Hii All
         I have got an error while updating Decimal places in General Settings
Cannot update while another user is connected to the company i have checked, there is no other user logged in, i could add other settings but the problem is only with Decimal Places
Note : there are no postings yet, a fresh database for a new client
         what could be the possible reason
                                                             thanks
                                                                     RIYAZ

Hiii All
      As a forum rule, i have initially gone through with the existing threads and then i was force to post a thread,
          would be helpfull if there is any other way..
                                            Thanks
                                                     RIYAZ

Similar Messages

  • Error message when updating decimal places in general settings

    Hello together,
    I got a big problem with the settings of decimal places.
    I know that I am only be able to incerase these but it's a virgin database for a customer with no data imported.
    Everytime I want to increase the prices decimal places I get the following error message:
    "cannot update while another user is connected to the company"
    But I checked all sessions connected to this database. I am the only person that is logged in.
    I closed the db more that one time but it doesn't work.
    Can you help me please?

    Hello Meike,
    I have had this problem a while ago and it was caused by the RPD-connection i had made with the customer server.
    I had to change the values directly on the client machine.
    Hope this also your solution.
    Kind regards.

  • Cannot Update Decimal Places in General Settings

    When I try to update the decimal points in the Administration > System Initialization > General Settings > Display path, SAP B1 gives me the following error:
    "Cannot update while another user is connected to the company."
    I am the only one on the system as "manager" with "Super User" and "Full Authorization"...
    The SAP B1 Guide titled "How to Make Initial Setting in Business One - US" says "you can change these settings at any time".
    QUESTION:  What might be stopping this change, and more importantly, how do I get around this error to be able to change the decimal points?
    Thanks all - Zal

    Hi Zal,
    I agree with you about the strange messaging used by SAP.
    But blocking the possibility to decrease the decimal places is extremely important.
    Suppose you have inserted a sales document with two items in this way:
    Item 1 ___Qty 1,234  ___Unit price 1,22  ___Line total  1,51
    Item 2 ___Qty  5,756 ___Unit price 3,15  ___Line total 18,13
    ____Document total 19,64
    Then, someone wants to change the number of decimal places of the quantity from 3 to 2.
    What happens would be:
    Item 1 ___Qty 1,23  ___Unit price 1,22  ___Line total  1,51
    Item 2 ___Qty  5,75 ___Unit price 3,15  ___Line total 18,13
    ____Document total 19,64
    If you try to do the calculations manually you will see that the results are not correct. In fact all the document would have to change in:
    Item 1 ___Qty 1,23  ___Unit price 1,22  ___Line total  1,50
    Item 2 ___Qty  5,75 ___Unit price 3,15  ___Line total 18,11
    ____Document total 19,61
    Also if the document total will show correct (in the case of rounding the second decimal position of item 2), the totals of any line is wrong. In fact there is no recalculation at all in SAP (and must not be done).
    Imagine such a modification over thousand of documents and all of the descendants (mainly if the have lead to printouts - as say confirmations - sent to customers or vendors).
    None of the economic figures will match.
    BR
    Antonio

  • There was an error while updating row count for "SH".."SH".CHANNELS

    Hi All,
    Am new to OBIEE.Pls help in this regard.
    Am building the physical layer as per Repository guide.When am importing the data in to this,am getting the below error.
    *"There was an error while updating row count for "SH".."SH".CHANNELS" :"*
    channles is the table name and having 5 rows.
    but am able to see the data in the sql prompt. like SELECT * FROM SH.CHANNELS then 5 rows data would be displaying..
    pls help in this regard and where is the excat problem?
    Thanks,

    what is the error?
    Make sure that your connection pool settings are okay..
    Make sure that, you are using correct driver in case of if you are using ODBC dsn..
    Also make sure that, your oracle server is running... TNS and Oracle server services

  • Error while updating Group Policy

    Hello All,
    I get the below error while updating the group policy on the user machin.
    C:\Users\905288>gpupdate /force
    Updating Policy...
    User Policy update has completed successfully.
    The following warnings were encountered during user policy processing:
    Windows failed to apply the Internet Explorer Zonemapping settings. Internet Exp
    lorer Zonemapping settings might have its own log file. Please click on the "Mor
    e information" link.
    Computer Policy update has completed successfully.
    For more detailed information, review the event log or run GPRESULT /H GPReport.
    html from the command line to access information about Group Policy results.
    Is there a way I can find which group policy is causing this issue?

    > Do you want me to give you those site details as well?
    Hm - not really, I have no error with zone assignments. It's you with
    the error :)
    Verify your site entries against
    http://support.microsoft.com/kb/184456
    - most probably, some of them do not adhere to the allowed wildcard rules.
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • Getting Error while updating   Vendor Challan

    Dear Guru,
                     my client want to use  Extended withholidng Tax . i v configured totaly according to indian TDS configuration. i m getting error while updating the vendor challan.
                 No unpaid tax lines exist for the given selection criteria.
    Message no. 8I702
    Diagnosis
    The corresponding withholding tax line  &1& is not present in WITH_ITEM table.
    System Response
    For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
    Procedure
    check entries in table WITH_ITEM for the open tax items chosen for clearing.
        Business Place and section code updating properly in table.....
    Thanks & Advance
    Laxmi Narayan

    Dear Laxmi Narayan,
    This error would occur, if you miss Business Area/Section Code at the time of Invoice.
    The following thread should answer your query:
    Extended W/H Tax
    Regards,
    Naveen.

  • RFC_ERROR_SYSTEM_FAILURE error while  updating the sick leave in MSS

    Hi Guru ,
    We are  getting  RFC_ERROR_SYSTEM_FAILURE error while updating the Sick leave for team member from portal .
    Please tell how to resolve this .
    Dump part :
    Runtime Errors         MESSAGE_TYPE_X
    Error analysis
        Short text of error message:
        System error
        Long text of error message:
        Technical information about the message:
        Message class....... "HRTIM00BUFMSG"
        Number.............. 001
        Variable 1.......... " "
        Variable 2.......... " "
        Variable 3.......... " "
        Variable 4.......... " "
    Information on where terminated
        Termination occurred in the ABAP program "SAPLHRTIM00_TMWBUFFER" - in
         "INITIALIZE".
        The main program was "SAPMSSY1 ".
        In the source code you have the termination point in line 55
        of the (Include) program "LHRTIM00_TMWBUFFERCB5".

    When an RFC fails from the portal to an SAP Backend, probably ECC 6.0 in your case, there are a few options that I use to troubleshoot:
          1. Ensure that all your jco's are set up ok, passwords, ect. JCOs do not appear to be the problem here
          2. Have an ABAP programmer review where the RFC is failing on the Backend System
          3. Set up an External Breakpoint in the backend RFC. Step to do this:
                   a. Get the Backend UserID of a test portal user that is having this issue.
                   b. Ensure that test user has "Debug Display" access in the Backend System
                   c. Log into the Backend system, go to SE 37 and display your RFC
                   d. Go to Utilities --> Settings --> Debugging in the top menu and add the Test User ID to the "Users" field.
                   e. Set an external breakpoint any where you want in the RFC.
                   f. Run the Leave request as the test user.
                   g. a new SAP GUI screen will popup once it hits the breakpoint. The portal browser will stay frozen until you step thru the ABAP program.
      Option 3 may sound like alot at first if you never used it, but if you are responsible for troubleshooting portal issues like this one, it is a skill you must have. You can also have an ABAP resource responsible for external debugging when you come accross issues like these. It helps you see exactly what data is being passed in from the portal and what is happening to cause the error.
    Regards,
    Tom

  • Error while updating the configuration files (MOB20003)

    hi,
    After installing the BI 4.0 server, i am trying to configure mobile using mobile server configuration tool. When i enter all the information for non Blackberry option as i would like to access through ipad, its giving me the error message" Error while updating the configuration files (MOB20003)" Please advise.

    Hi Somesh,
    If i am not wrong, only a war file deployment is needed to make ipad work.
    This happens with URL hitting directly on the Server.
    If you want to configure VAS and VMS servers, let us know what configuration settings have been done.
    Regards,
    Atul

  • Error while updating vendor challan   J1INCHLN

    Dear Guru,
    my client want to use Extended withholidng Tax . i v configured totaly according to indian TDS configuration. i m getting error while updating the vendor challan.
    No unpaid tax lines exist for the given selection criteria.
    Message no. 8I702
    Diagnosis
    The corresponding withholding tax line &1& is not present in WITH_ITEM table.
    System Response
    For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
    Procedure
    check entries in table WITH_ITEM for the open tax items chosen for clearing.
    Business Place and section code updating properly line itme table.....
    Thanks & Advance
    Laxmi Narayan

    Hi,
    Also check the following:
    Sometimes, user will delete the automatic line items generated related to TDS and they will enter manually.  You can find the same as below:
    goto vendor line item in the given document and click on withholding tax icon (near to more data), if u didn't find any thing in this place means, user entered the same mannually, if you found some information in that tax box, then problem not with user.
    If u didn't found any thing in that tax tab, then system won't generate any accounting entry and will issue an error message like what u getting.  In that movement, while updating j1inchln ignore the wrong documents and continue with correct documents.
    You can suggest them, they should reverse the entries which is causing problem, there was no solution from sap side(as this is a mistake from user side)
    Earlier i also faced the same problem, identified users deleted the automatic line items and enter the tds line items mannually
    Hope it can help u to resolve this issue
    all the best
    prasad

  • Error while updating a plan

    Hi,
    I have encountered an error while updating a plan. While i update the uplan , the grid gets filled but it throws a message stating
    "Maximum Number of Result Blocks has been reached"
    Maximum number of Result Blocks has been reached.
    [Oracle BAM Enterprise Link error code:  DC -- 0x1, DC -- 0xD4]
    Error while processing the data for the step 'Grid'
    [Oracle BAM Enterprise Link error code:  DC -- 0x1, DC -- 0x83]
    Maximum number of Result Blocks has been reached.
    [Oracle BAM Enterprise Link error code:  DC -- 0x1, DC -- 0xD4]
    Error while processing the data for the step 'Grid'
    [Oracle BAM Enterprise Link error code:  DC -- 0x1, DC -- 0x83]
    Update of Plan "deposittest created 7/19/2007 5:11:50 PM" failed.
    [Oracle BAM Enterprise Link error code:  PlanMgr -- 0x1, PlanMgr -- 0xD5]
    The data updation stops after the row count 49900.
    Please help to resolve this error .
    Thanks in advance.
    Regards,
    Lathika

    Hi,
    in BAM-Administrator you should rraise Parameter "MaxResultBlocks".
    BAM originaly is al licensed Software from Group1 named "Sagent Data Flow".
    This may help searching the web.
    Greetz,
    GOI

  • Error while updating to iOS 6.1.2

    Error while updating software to iOS 6.1.2

    what is the error? if you want help you need to provide some details.

  • Error While updating info in the People Form-Additional Personla Details

    Hi All,
    Iam getting an Error While updating information in the People Form,Additional Personla Details DFF.
    Error Like:
    APP-PER-289974:There has been an error Processing this person,The error encountered is 'ORA-20001:HZ_STNC_SQL_EXCEP:N,PROC.sync_Person,N,ERROR.ORA-25153:Temporary Tablespace is empty ,N,POO,1265890',which occured in procedure  per_htrca_merge_tca_person at step10.
    Please contact your support represntative.
    Thanks -
    Sowmya

    Thanks you,
    By this Note id:395136.1
    Iam unable to find this Set profile 'HZ: Generate Events for DQM Real-Time Synchronization' to No
    with this Note id:278422.1
    We are unable to find this proifle option : HZ: Data Sharing and Security Enabled profile
    we are using applications 11i.
    please help to find this Profile option.
    But with this note id:ID 395136.1
    This is Working.
    Query for HZ: DQM Synchronization Method profile. Set the value to Disable.
    But iam facing proble while uploding data to DFF ,Error--SQL exception occurred during PL/SQL upload.
    Thanks for the Support-
    Sowmya.
    Edited by: user13419037 on Aug 11, 2011 11:53 PM
    Edited by: user13419037 on Aug 12, 2011 12:03 AM
    Edited by: user13419037 on Aug 12, 2011 3:45 AM

  • Error while updating the content in workflow

    Hi,
    I'm getting an error while updating the content in workflow thru the checkout option. i.e. contributor checks in the content - reviewer rejects the content - then contributor checks out and modifies the content as per the reviewer's remarks and while checking in the following error occurs
    Content Server Request Failed
    Unable to check in content item 'HO000128' for workflow. Unable to execute service method 'checkInUpdateRevByID'. (System Error: Runtime error: java.lang.NullPointerException
    at intradoc.server.DocServiceHandler.checkInRevByID(DocServiceHandler.java:248)
    at intradoc.server.DocServiceHandler.checkInUpdateRevByID(DocServiceHandler.java:240)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
    at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:293)
    at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
    at intradoc.server.Service.doCodeEx(Service.java:490)
    at intradoc.server.Service.doCode(Service.java:472)
    at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
    at intradoc.server.Service.doAction(Service.java:452)
    at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
    at intradoc.server.Service.doActions(Service.java:447)
    at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1071)
    at intradoc.server.Service.executeSubServiceCode(Service.java:3497)
    at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:942)
    at intradoc.server.Service.executeServiceEx(Service.java:3492)
    at intradoc.server.Service.executeService(Service.java:3476)
    at intradoc.server.DocServiceHandler.determineWorkflowCheckin(DocServiceHandler.java:3833)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
    at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:293)
    at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
    at intradoc.server.Service.doCodeEx(Service.java:490)
    at intradoc.server.Service.doCode(Service.java:472)
    at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
    at intradoc.server.Service.doAction(Service.java:452)
    at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
    at intradoc.server.Service.doActions(Service.java:447)
    at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1071)
    at intradoc.server.Service.executeSubServiceCode(Service.java:3497)
    at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:942)
    at intradoc.server.Service.executeServiceEx(Service.java:3492)
    at intradoc.server.Service.executeService(Service.java:3476)
    at intradoc.server.Service.doSubService(Service.java:3465)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
    at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:279)
    at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:264)
    at intradoc.server.Service.doCodeEx(Service.java:507)
    at intradoc.server.Service.doCode(Service.java:472)
    at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
    at intradoc.server.Service.doAction(Service.java:452)
    at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
    at intradoc.server.Service.doActions(Service.java:447)
    at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1121)
    at intradoc.server.Service.executeActions(Service.java:433)
    at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:635)
    at intradoc.server.Service.doRequest(Service.java:1707)
    at intradoc.server.ServiceManager.processCommand(ServiceManager.java:359)
    at intradoc.server.IdcServerThread.run(IdcServerThread.java:197))
    Please help to resolve.
    Thanks in advance
    Prasad

    I also get error while updating the content in workflow thru the checkout option as reviewer. i.e. contributor checks in the content - then reviewer either updates the metadata or checks out and modifies the content and while checking in the following error occurs
    Content Server Request Failed
    Unable to update the content item information for 'HO000128'.
    The content ID must be specified.
    Please help to resolve.
    Thanks in advance
    Prasad

  • Error while updating my WP

    Hi, I have got an error while updating my WP on lumia 800? the error code is 80070002. how to resole

    @RoukailaRedouane
    Similar issue raised here with referral to resource below:http://answers.microsoft.com/en-us/winphone/forum/wp7-sync/error-80070002-occurred-when-checking-upd...
    More information can be found here:http://support.microsoft.com/kb/910336/en-us
    Happy to have helped forum with a Support Ratio = 42.5

  • Error while updating phone button template in CUCM 8.6

    Experts,
    I'm getting following error while updating phone button template in CUCM 8.6;
    Update failed. java.sql.SQLException: System catalog (sysprocbody) corrupted.
    Please check the screen shot attached here with.
    What could be the reason?
    Thanks
    Vivek

    I'm not a Cisco employee, so I can't do anything with your backup.!
    You need to take a backup as a precaution (You should have been doing this anyway) Then you need to call Cisco TAC to get the underlying problem fixed. CalManager is a locked-down environment, and only TAC can get the low-level access needed to fix database problems.
    GTG

Maybe you are looking for