Error while updating from Ios5 to Ios5.0.1

When i try to upgrade mi original ipad from 5.0 to 5.01 it marks me an error at the end of the download
ill aprecciate any help about it

If you are getting a network timeout error then try temporarily turning off your firewall and antivirus software until the download has completed. If it's a different error then if you say what it is somebody might be able to help.

Similar Messages

  • Error while updating from 10.8.4 to 10.8.5 on MacBook Pro

    Hi,
    I wanted to update from 10.8.4 to 10.8.5 as offered by App Store. During installation an error message box showd up saying just "An unexspected error occured" (Translated from german). After hitting "ok", the update disappeared from the AppStore Update Tab. There was a hint before, that for that update I had to restart the computer, but after that error message, there was no notice in the message center (as it normallys shows up) to restart. I did'nt restart until now, since I'm not sure if my system will still work afterwards (at the moment it seems to be all ok). The "About this Mac" windows show already version 10.8.5.
    I have an MacBookPro 15'' Retina, German version.
    I looked throught the installation protocol and found the line, where it  was logged: Here is an excerpt from the log file. I marked the relevant line with "-->".
    I don't now what to do now. Can I /Should I restart my Macbook ? Should any action be made to correct this error or is it not important ? Can I redo the update ?
    Hope that someone could help me.
    Regards
    Sep 28 13:57:28 localhost Software Update[16534]: SUAppStoreUpdateController: start download session with 091-9721
    Sep 28 13:57:28 localhost Software Update[16537]: Acquired Lock: 501, 16534, 0
    Sep 28 13:57:28 localhost Software Update[16534]: SUAppStoreUpdateController: session began for products 091-9721
    Sep 28 14:04:42 localhost Software Update[16537]: Releasing Lock: 501, 16534, 0
    Sep 28 14:04:42 localhost Software Update[16534]: SUAppStoreUpdateController: session ended for products 091-9721
    Sep 28 14:04:42 localhost Software Update[16534]: SUAppStoreUpdateController: start install session with 091-9716
    Sep 28 14:04:42 localhost Software Update[16537]: Acquired Lock: 501, 16534, 0
    Sep 28 14:04:42 localhost Software Update[16534]: SUAppStoreUpdateController: session began for products 091-9716
    Sep 28 14:04:53 localhost Software Update[16534]: Product 091-9716: SU choice not visible
    --> Sep 28 14:04:53 localhost Software Update[16534]: SUAppStoreUpdateController: error installing product 091-9716: Ein unerwarteter Fehler ist aufgetreten.
    Sep 28 14:04:53 localhost Software Update[16534]: Removing 091-9716
    Sep 28 14:04:53 localhost Software Update[16537]: Releasing Lock: 501, 16534, 0
    Sep 28 14:04:53 localhost Software Update[16534]: SUAppStoreUpdateController: session ended for products 091-9716
    Sep 28 14:06:40 localhost Software Update[18452]: SUAppStoreUpdateController: found in cache: 091-9721, zzzz041-9488
    Sep 28 14:06:40 localhost Software Update[18452]: SoftwareUpdate: Scan for client pid 18452 (/Applications/App Store.app/Contents/MacOS/App Store)
    Sep 28 14:06:40 localhost Software Update[18452]: SoftwareUpdate: Using filter keys 091-9721, zzzz041-9488
    Sep 28 14:06:41 localhost Software Update[18452]: SoftwareUpdate: Using catalog https://swscan.apple.com/content/catalogs/others/index-mountainlion-lion-snowleo pard-leopard.merged-1.sucatalog.gz
    Sep 28 14:06:41 localhost Software Update[18452]: Added 11 PPD versions for /Library/Printers/PPDs/Contents/Resources from cache as of 2013-09-21 19:26:46 +0000

    The error  happened with this :  Digital Camera RAW Compatibility Update 4.09
    If you have 10.8.5 & things work as expected, you probably don't need to do anything - although there's always the combo update, as Barney mentioned.

  • Error while updating from front end

    Hi,
    I'am using oracle forms 6i to connect to a table and i'am trying to update from the frontend, but i get an error saying the following,
    'Could not reserve record( 2 tries )...'
    what is the reason, is it because the record is locked???
    and if so is there any way to find out whether a record is locked without trying to update and find it out??? kindly reply as soon as possible...
    Thanks And Regards,
    Vairavan.S

    Yes.. This message comes when the record that you are trying to update is opened for update by another application or explicitly locked by some other user. So, whenever you try to update the record, the standard practice is to lock the row.
    If you are able to lock the row then you can update it.
    Example :
    CURSOR emp_cur(p_emp_id NUMBER)
    SELECT *
    FROM emp
    WHERE emp_id = p_emp_id
    FOR UPDATE OF emp_id NOWAIT;
    l_emp_rec EMP_CUR%ROWTYPE;
    When you open this cursor and fetch into a Record variable, it fetches the data if the record is not locked. Else it gives you NULL in record variable fields.
    Use this if you are using a backend procedures to do operations on your record
    Cheers
    Kumar

  • Error 1603 while updating from iOS5.0 to iOS5.1 on iPhone4

    When restarted my computer and reconnects my iPhone, it now prompts saying that iPhone in recovery mode and I must restore before it can be used with iTunes. I am very sure there's 2 backup copies in my (default designated) computer folder, with one being dated 12Mar (the day of updating). I browsed the computer folder while waiting for the downloads in iTunes.
    However the backup folder is now empty!! and I can't restore to any previous backup, and my phone cannot be turn on. The iTunes restore button asked if I wanted to restore to original factory settings. How could this happen?!! My Recycle bin has this item "iPhone3,1_5.0.1_9A405_Restore.ipsw".
    Please advise. How can I retreive my previous phone backup, or just return to iOS5.0.1 with its data prior to the 5.1?
    Please help!! your kind assistance is muchly appreciated. thanks.

    I have figured out. My bad. I searched at the wrong backup folder. Anyway, I just proceed with the restore and then when it completes, it will prompt to restore to previous backup. Apology for the inconvenience. Thanks all.

  • Error while updating to iOS5 in backup section

    Here is the warning message:
    An error occured while backing up this iPhone (-43).
    Would you like to continue to update this iPhone?
    Continuing will result in the loss of all contents on this iPhone
    So does it mean that I will lose all my contacts, apps, notes, photo, song, and everything?

    If you are getting a network timeout error then try temporarily turning off your firewall and antivirus software until the download has completed. If it's a different error then if you say what it is somebody might be able to help.

  • Regarding syntax error while updating from 4.6b to ECC 6.0

    hello Experts,
    I'm presently working in upgrade project, Here it shows an error for one of the form pasted below.
    FORM MAKEPRINT USING TXT.
    DATA: BEGIN OF CVT_TABLE,
            X0(1) TYPE X VALUE 0,
            C0(1) VALUE '#',
            X1(1) TYPE X VALUE '7F',
            C1(1) VALUE '#',
            END OF CVT_TABLE.
      TRANSLATE TXT USING CVT_TABLE.
    ENDFORM.                    "MAKEPRINT
    Error - CVT_TABLE must be a character type data object ( data type C,N,D,T or STRING ).
    I dont have solution for the above code, Would you please kindly provide me the solution.
    <removed_by_moderator>
    Thanks,
    Abdur
    Edited by: Julius Bussche on Sep 22, 2009 1:26 PM
    Edited by: Julius Bussche on Sep 22, 2009 1:26 PM

    Hi,
           This happens due to unicode conversion in ECC.You will have to change the type X to type C using the class cl_abap_char_utilities. For code help see the below link
    http://help.sap.com/saphelp_nw04/helpdata/EN/79/c554d9b3dc11d5993800508b6b8b11/content.htm

  • 3194 error while updating from 4.3.5 to 5.1.1

    i have just downloaded the latest itunes and have successfully downloaded the latest 5.1.1 for ipad 2 but right after sync i get the extracting software msg and after that i get 3194 error. i have even tried reinstalling itunes and rebooting ipad 2 but i have failed to get the thing going. help me

    Try and get your iPad in Recovery Mode
    http://support.apple.com/kb/ht1808

  • Error while updating data from PSA to ODS

    Hi Sap Gurus,
    I am facing the error while updating data from PSA to ODS in BI 7.0
    The exact error message is:
    The argument 'TBD' cannot be interpreted as a number
    The error was triggered at the following point in the program:
    GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
    Please suggest how to proceed on this issue.
    Points will be awarded.

    Hi ,
    Try to simulate the process.That can give you exact error location.
    It seems like while updating few records may be no in the format of the field in which it is updated.
    Regards
    Rahul Bindroo

  • Error while updating data from DataStore object

    Hi,
    Currently we are upgrading BW3.5 to BI7.0 for technical only,
    we found and errors during process chain run in further processing step. This step is basically a delta loading from DSO to Cube.
    The error message are:
    Error while updating data from DataStore object 0GLS_INV
    Message no. RSMPC146
    Job terminated in source system --> Request set to red
    Message no. RSM078
    That's all no further errors message can be explained clearly here from system.
    I have applied SAP note 1152453 and reactivate the datasource, infosource, and data target.
    Still no help here!?
    Please advise if you encountered these errors before.
    Thanks in advance.
    Regards,
    David
    Edited by: David Tai Wai Tan on Oct 31, 2008 2:46 PM
    Edited by: David Tai Wai Tan on Oct 31, 2008 2:50 PM
    Edited by: David Tai Wai Tan on Oct 31, 2008 2:52 PM

    Hi Vijay,
    I got this error:
    Runtime Errors         MESSAGE_TYPE_X      
    Date and Time          04.11.2008 11:43:08 
    To process the problem further, contact you SAP system       
    administrator.                                                                               
    Using Transaction ST22 for ABAP Dump Analysis, you can look  
    at and manage termination messages, and you can also         
    keep them for a long time.                                   
    Short text of error message:                                             
    No start information on process LOADING                                                                               
    Long text of error message:                                              
      Diagnosis                                                               
          For process LOADING, variant ZPAK_0SKIJ58741F4ASCSIYNV1PI9U, the    
          end should be logged for instance REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX    
          under the log ID D4FIDCBHXPLZMP5T71JZQVUWX. However, no start has   
          been logged for this process.                                       
      System Response                                                         
          No log has been written. The process (and consequently the chain)   
          has been terminated.                                                
      Procedure                                                               
          If possible, restart the process.                                   
      Procedure for System Administration                                                                               
    Technical information about the message:                                 
    Message class....... "RSPC"                                              
    Number.............. 004                                                 
    Variable 1.......... "D4FIDCBHXPLZMP5T71JZQVUWX"                         
    Variable 2.......... "LOADING"                                           
    Variable 3.......... "ZPAK_0SKIJ58741F4ASCSIYNV1PI9U"                    
    Variable 4.......... "REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX" 
    Any idea?

  • Error while updating EP6.0 from SP09 to SP27

    Hi All,
    I am getting the following error while updating the Enterprise portal 6.0 from SP09 to SP27.
    WARNING    2011-05-19 16:50:09
               CJSlibModule::writeWarning_impl()
    Execution of the command "C:\j2sdk1.4.2_13-x64/bin/java.exe '-classpath' 'C:\Program Files\sapinst_instdir\PATCH\ORA/install/sharedlib/launcher.jar;.' '-Xmx512m' 'com.sap.engine.offline.OfflineToolStart' 'com.sap.engine.configtool.batch.BatchConfig' 'C:\Program Files\sapinst_instdir\PATCH\ORA/install/lib;C:\Program Files\sapinst_instdir\PATCH\ORA/install/sharedlib' 'C:\Program Files\sapinst_instdir\PATCH\ORA/getSafeMode.xml'" finished with return code 31415. Output:
    Can not get DB connection. Batchconfig will only be able to execute offline tasks.
    ERROR      2011-05-19 16:50:09
               CJSlibModule::writeError_impl()
    CJS-20076  Error while retrieving the mode of the Java engine. SOLUTION: See output of logfile C:\Program Files\sapinst_instdir\PATCH\ORA/getEngineMode.log: 'Can not get DB connection. Batchconfig will only be able to execute offline tasks.
    TRACE      [iaxxejsbas.hpp:384]
               handleException<ESAPinstJSError>()
    Converting exception into JS Exception EJSException.
    ERROR      2011-05-19 16:50:09
               CJSlibModule::writeError_impl()
    CJS-20076  Error while retrieving the mode of the Java engine. SOLUTION: See output of logfile C:\Program Files\sapinst_instdir\PATCH\ORA/getEngineMode.log: 'Can not get DB connection. Batchconfig will only be able to execute offline tasks.
    Please hel me to resolve this issue.
    Regards
    Karthik Ravoori

    > Execution of the command "C:\j2sdk1.4.2_13-x64/bin/java.exe '-classpath' 'C:\Program Files\sapinst_instdir\PATCH\ORA/install/sharedlib/launcher.jar;.' '-Xmx512m' 'com.sap.engine.offline.OfflineToolStart' 'com.sap.engine.configtool.batch.BatchConfig' 'C:\Program Files\sapinst_instdir\PATCH\ORA/install/lib;C:\Program Files\sapinst_instdir\PATCH\ORA/install/sharedlib' 'C:\Program Files\sapinst_instdir\PATCH\ORA/getSafeMode.xml'" finished with return code 31415. Output:
    > Can not get DB connection. Batchconfig will only be able to execute offline tasks.
    You'r JDK is really old, AFAIK the first one officially released for x86_64 on Windows was 1.4.2_17. I suggest you upgrade your JDK ot the latest one (1.4.2_30) and try again.
    Markus

  • Fix iPhone 4S in recovery mode after updating from IOS5 to 6.1.3

    How do i get my iPhone 4S out of recovery mode without losing all my data? I am not very tech savvy and too scared to do anything without instruction. My phone went into recovery mode when updating from IOS5 to 6.1.3 (or whatever was the latest yesterday). Oh how I wish I hadn't. I think I want my IOS5 back!
    Can I use Google Maps on 6.1.3?

    Okay I have read that info but the iTunes sreens I am experiencing has different messages.
    1st = iTunes has dectected an iPhone in recovery mode. You must restore the iPhone before it can be used in iTunes.
    2nd = iPhone is in recovery mode. Restore
    3rd = Are you sure you want to restore the iPhone "iPhone" to its factory settings? All of your media and other data will be erased, and the newest version of iPhone software will be installed.
    iTunes will verify the restore with Apple. After this process is complete, you will have the option to restore your contacts, calendars, text messaes and other settings.
    .. now will my music, apps and photos be saved too? Here are the three messages.. you can see that the iTunes settings/screen configuation is not like those in the tutorial in the link. There is nothing in my "summary" and no restore to back up shown at this point. So I am wary to proceed.
    Thanks again to my helpers. Also I don't mind if the whole update was aborted.

  • TS3694 Hi my iphone 5 is bricked in recovery mode while updating from ios 7 to 7.0.4 and every time when i try to restore Unknoown error 12 pops up.iphone was not jailbroken. please help

    Hi my iphone 5 is bricked in recovery mode while updating from ios 7 to 7.0.4 and every time when i try to restore 'Unknoown error 12' pops up each time.iphone was not jailbroken. please help

    From the article that your statement was posted from:
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.

  • Error while updating a plan

    Hi,
    I have encountered an error while updating a plan. While i update the uplan , the grid gets filled but it throws a message stating
    "Maximum Number of Result Blocks has been reached"
    Maximum number of Result Blocks has been reached.
    [Oracle BAM Enterprise Link error code:  DC -- 0x1, DC -- 0xD4]
    Error while processing the data for the step 'Grid'
    [Oracle BAM Enterprise Link error code:  DC -- 0x1, DC -- 0x83]
    Maximum number of Result Blocks has been reached.
    [Oracle BAM Enterprise Link error code:  DC -- 0x1, DC -- 0xD4]
    Error while processing the data for the step 'Grid'
    [Oracle BAM Enterprise Link error code:  DC -- 0x1, DC -- 0x83]
    Update of Plan "deposittest created 7/19/2007 5:11:50 PM" failed.
    [Oracle BAM Enterprise Link error code:  PlanMgr -- 0x1, PlanMgr -- 0xD5]
    The data updation stops after the row count 49900.
    Please help to resolve this error .
    Thanks in advance.
    Regards,
    Lathika

    Hi,
    in BAM-Administrator you should rraise Parameter "MaxResultBlocks".
    BAM originaly is al licensed Software from Group1 named "Sagent Data Flow".
    This may help searching the web.
    Greetz,
    GOI

  • Error while updating patch level 11 of HR

    Dear All,
    I am getting following error while updating HR patch level 11.
    Phase OBJECTS_LOCKED_?: Objects Locked in Requests
    Request      Names of Locked Transport Objects
    MRDK900089   LIMU REPS H99_POST_PAYMENT
                 LIMU REPS RPCIPE00
    MRDK900542   R3TR FORM HR_IN_TAXF16000Y
    the above request is in other client, and it is a local request, which is not getting transported; i mean it does not allow to transport. give the following error.
    Object messages: R3TR CINS 01200615322 0000824666
    Transport objects from package PCPO to target MRP only
    Object messages: R3TR NOTE 0000970953
    Transport objects from package PCPO to target MRP only
    Object messages: LIMU METH CL_HRPAY99_POSTING_LOG DATA_TOP_FILL_TEXT
    Transport objects from package PCPO to target MRP only
    Object messages: LIMU METH CL_HRPAY99_POSTING_LOG PUT_PERNR_INFO
    Transport objects from package PCPO to target MRP only
    Object messages: LIMU REPS H99_POST_PAYMENT
    Transport objects from package PCPO to target MRP only
    Please help me how to rectify.
    Thanks n regards
    Bhaskar

    Hello Bhaskar,
    is the transport already approved?
    If not approve it and try it again. (also it is a local one)
    If not check the objects and unlock them manually the following way:
    SE03 => Unlock Objects (Expert Tool)
    But if you approve your transport... the objects should be unlocked.
    Regards
    Stefan

  • Error while updating to target

    Hi Friends,
    Im trying to load the data from the DSO to the cube, while loading the data im getting a error "Error while updating to target CUBE Name".
    when i check the message in error stack im getting this "Value 'Complaints Resolution for Activity ' (hex. '0043006F006D0070006C00610069006E007400730020005200') of characteristic ZWF_NAME BRAIN 60"
    I found a notEe 1148007, this not says that
    "A program to write data is generated for each InfoCube that contains data (type "Standard"). The name of this program is stored in the table RSDCUBELOC.  When you activate an InfoCube again, the name of this program may inadvertently be deleted.
    In the DTP monitor, this error occurs in the "Update" step and message RSBK 241 is displayed: "Error while updating to target G7SD0C05 (type INFOCUBE)"
    I have checked the table RSDCUBELOC and i can see the program entry there and after that i have reactivated the cube and reloaded the data but im still getting the same issue.
    Can anyone pls suggest me how to resolve this issue?.
    Thanks in advance
    BN

    Hi,
    It is issue with the Lowe case letters of a particular info object.  You have to write a routine to convert those lower into upper.
    reason is if you chack IOB properties Lower case might be unchecked and the data you are getting in lower case.
    Let us know the details if you still have any issues.
    Reg
    Pra

Maybe you are looking for