Error while updating the os on my iphone to 4.3.3 I get an error

I have been trying to upgrade the OS on my iPhone 3GS from 4.3.2 to 4.3.3 but I keep getting an error message as shown below. I have tried all the steps that are recommended to resolve the issue but nothing seems to work.
Need help.........

I'm having the same problem and much more terrible is that it's always requiring over 17 hours for the update even I did upgrade the latest version for iTunes. I don't know what to do now. I give up. Anyone could help????Thanks

Similar Messages

  • Encountered error while updating the payment document

    Hi Guys,
    I encountered an error while updating the payment document of one of our bank account. See below error message:
    Error: Unable to lock the record. Cause: The record is being modified by another user
    thanks,
    gracie

    Hi Vikas,
    Repeat the changes you are trying to make one step at a time and make sure you click on update in both the series screen and the document numbers screen every time.
    I've faced this issue and doing this helped.
    Regards,
    Hamsa

  • Error while updating the content in workflow

    Hi,
    I'm getting an error while updating the content in workflow thru the checkout option. i.e. contributor checks in the content - reviewer rejects the content - then contributor checks out and modifies the content as per the reviewer's remarks and while checking in the following error occurs
    Content Server Request Failed
    Unable to check in content item 'HO000128' for workflow. Unable to execute service method 'checkInUpdateRevByID'. (System Error: Runtime error: java.lang.NullPointerException
    at intradoc.server.DocServiceHandler.checkInRevByID(DocServiceHandler.java:248)
    at intradoc.server.DocServiceHandler.checkInUpdateRevByID(DocServiceHandler.java:240)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
    at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:293)
    at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
    at intradoc.server.Service.doCodeEx(Service.java:490)
    at intradoc.server.Service.doCode(Service.java:472)
    at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
    at intradoc.server.Service.doAction(Service.java:452)
    at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
    at intradoc.server.Service.doActions(Service.java:447)
    at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1071)
    at intradoc.server.Service.executeSubServiceCode(Service.java:3497)
    at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:942)
    at intradoc.server.Service.executeServiceEx(Service.java:3492)
    at intradoc.server.Service.executeService(Service.java:3476)
    at intradoc.server.DocServiceHandler.determineWorkflowCheckin(DocServiceHandler.java:3833)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
    at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:293)
    at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
    at intradoc.server.Service.doCodeEx(Service.java:490)
    at intradoc.server.Service.doCode(Service.java:472)
    at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
    at intradoc.server.Service.doAction(Service.java:452)
    at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
    at intradoc.server.Service.doActions(Service.java:447)
    at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1071)
    at intradoc.server.Service.executeSubServiceCode(Service.java:3497)
    at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:942)
    at intradoc.server.Service.executeServiceEx(Service.java:3492)
    at intradoc.server.Service.executeService(Service.java:3476)
    at intradoc.server.Service.doSubService(Service.java:3465)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
    at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:279)
    at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:264)
    at intradoc.server.Service.doCodeEx(Service.java:507)
    at intradoc.server.Service.doCode(Service.java:472)
    at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
    at intradoc.server.Service.doAction(Service.java:452)
    at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
    at intradoc.server.Service.doActions(Service.java:447)
    at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1121)
    at intradoc.server.Service.executeActions(Service.java:433)
    at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:635)
    at intradoc.server.Service.doRequest(Service.java:1707)
    at intradoc.server.ServiceManager.processCommand(ServiceManager.java:359)
    at intradoc.server.IdcServerThread.run(IdcServerThread.java:197))
    Please help to resolve.
    Thanks in advance
    Prasad

    I also get error while updating the content in workflow thru the checkout option as reviewer. i.e. contributor checks in the content - then reviewer either updates the metadata or checks out and modifies the content and while checking in the following error occurs
    Content Server Request Failed
    Unable to update the content item information for 'HO000128'.
    The content ID must be specified.
    Please help to resolve.
    Thanks in advance
    Prasad

  • Error while updating the plan in Enterprise link

    hi
    i am getting an error while updating the plan which polls the JMS topic and inserts into the grid.
    IMessageSourceReceiver->messageReceive: javax.jms.JMSSecurityException: JMS-232: An invalid user/password was specified for the JMS connection
         at oracle.jms.AQjmsDBConnMgr.checkForSecurityException(AQjmsDBConnMgr.java:916)
         at oracle.jms.AQjmsDBConnMgr.getConnection(AQjmsDBConnMgr.java:601)
         at oracle.jms.AQjmsDBConnMgr.<init>(AQjmsDBConnMgr.java:238)
         at oracle.jms.AQjmsConnection.<init>(AQjmsConnection.java:183)
         at oracle.jms.AQjmsTopicConnectionFactory.createTopicConnection(AQjmsTopicConnectionFactory.java:209)
         at iteration.enterpriselink.sources.JMSConsumer.start(JMSConsumer.java:94)
         at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.jmsConsumerStart(JMSMessageSourceReceiverImpl.java:1001)
         at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.messageReceive(JMSMessageSourceReceiverImpl.java:326)
    [Oracle BAM Enterprise Link error code:  0x75 -- 0x1, 0x75 -- 0x3A]
    Error during Message Receive operation.
    [Oracle BAM Enterprise Link error code:  0x75 -- 0x1, 0x75 -- 0x3B]
    Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
    [Oracle BAM Enterprise Link error code:  DC -- 0x1, DC -- 0x83]
    Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
    [Oracle BAM Enterprise Link error code:  DC -- 0x1, DC -- 0x83]
    Update of Plan "Untitled, created 3/11/2009 3:56:28 PM" failed.
    [Oracle BAM Enterprise Link error code:  PlanMgr -- 0x1, PlanMgr -- 0xD5]
    the username and password that i have given are valid and i have given privileges that were mentioned on the technote to the user. can somebody help me out in resolving this as this is very critical for me right now
    Thanks in advance

    I also get error while updating the content in workflow thru the checkout option as reviewer. i.e. contributor checks in the content - then reviewer either updates the metadata or checks out and modifies the content and while checking in the following error occurs
    Content Server Request Failed
    Unable to update the content item information for 'HO000128'.
    The content ID must be specified.
    Please help to resolve.
    Thanks in advance
    Prasad

  • RFC_ERROR_SYSTEM_FAILURE error while  updating the sick leave in MSS

    Hi Guru ,
    We are  getting  RFC_ERROR_SYSTEM_FAILURE error while updating the Sick leave for team member from portal .
    Please tell how to resolve this .
    Dump part :
    Runtime Errors         MESSAGE_TYPE_X
    Error analysis
        Short text of error message:
        System error
        Long text of error message:
        Technical information about the message:
        Message class....... "HRTIM00BUFMSG"
        Number.............. 001
        Variable 1.......... " "
        Variable 2.......... " "
        Variable 3.......... " "
        Variable 4.......... " "
    Information on where terminated
        Termination occurred in the ABAP program "SAPLHRTIM00_TMWBUFFER" - in
         "INITIALIZE".
        The main program was "SAPMSSY1 ".
        In the source code you have the termination point in line 55
        of the (Include) program "LHRTIM00_TMWBUFFERCB5".

    When an RFC fails from the portal to an SAP Backend, probably ECC 6.0 in your case, there are a few options that I use to troubleshoot:
          1. Ensure that all your jco's are set up ok, passwords, ect. JCOs do not appear to be the problem here
          2. Have an ABAP programmer review where the RFC is failing on the Backend System
          3. Set up an External Breakpoint in the backend RFC. Step to do this:
                   a. Get the Backend UserID of a test portal user that is having this issue.
                   b. Ensure that test user has "Debug Display" access in the Backend System
                   c. Log into the Backend system, go to SE 37 and display your RFC
                   d. Go to Utilities --> Settings --> Debugging in the top menu and add the Test User ID to the "Users" field.
                   e. Set an external breakpoint any where you want in the RFC.
                   f. Run the Leave request as the test user.
                   g. a new SAP GUI screen will popup once it hits the breakpoint. The portal browser will stay frozen until you step thru the ABAP program.
      Option 3 may sound like alot at first if you never used it, but if you are responsible for troubleshooting portal issues like this one, it is a skill you must have. You can also have an ABAP resource responsible for external debugging when you come accross issues like these. It helps you see exactly what data is being passed in from the portal and what is happening to cause the error.
    Regards,
    Tom

  • Error while updating the configuration files (MOB20003)

    hi,
    After installing the BI 4.0 server, i am trying to configure mobile using mobile server configuration tool. When i enter all the information for non Blackberry option as i would like to access through ipad, its giving me the error message" Error while updating the configuration files (MOB20003)" Please advise.

    Hi Somesh,
    If i am not wrong, only a war file deployment is needed to make ipad work.
    This happens with URL hitting directly on the Server.
    If you want to configure VAS and VMS servers, let us know what configuration settings have been done.
    Regards,
    Atul

  • Get Error while update the User defined row table through DSK Code

    Hi experts,
    I have got an error while updating the user row defined table.
    Error is - "Invalid row"
    I have created one master table "@CBF_FARM " and Child table "@CBF_FAR1"
    First i inserted 5 record in the child table so in my my child table there are 5 Line id (1,2,3,4,5 one for each row).
    after that i delete 2 rows (3rd & 4th row) from child table now in my child table there are 3 rows( Line id 1, 2, 5). Please See attachment.
    Now i am updating  the last record of child table through Code  (Line id is 5)  from other form, then i got error  invalid row.
    Following Code used for updating the user defined child table.
      SAPbobsCOM.GeneralService oGeneralService1 = null;
                                    SAPbobsCOM.GeneralData oGeneralData1 = null;
                                    SAPbobsCOM.GeneralDataParams oGeneralParams1 = null;
                                    SAPbobsCOM.CompanyService sCmp1 = null;
                                    SAPbobsCOM.GeneralData oChild1 = null;
                                    SAPbobsCOM.GeneralDataCollection oChildren1 = null;
                                    sCmp1 = clsAddOn.LDNA_Company.GetCompanyService();
                                    oGeneralService1 = sCmp1.GetGeneralService("CBF_FARM");
                                    // Get UDO record
                                    oGeneralParams1 = ((SAPbobsCOM.GeneralDataParams)(oGeneralService1.GetDataInterface(SAPbobsCOM.GeneralServiceDataInterfaces.gsGeneralDataParams)));
                                    oGeneralParams1.SetProperty("Code", oForm.Items.Item("edtFarmCd").Specific.Value);
                                    oGeneralData1 = oGeneralService1.GetByParams(oGeneralParams1);
                                    // Add lines on UDO Child Table
                                    oChildren1 = oGeneralData1.Child("CBF_FAR1");
                                    // Create data for rows in the child table
                                    SAPbouiCOM.Item oItem = oForm.Items.Item("cmbShed");
                                    oCombo = oItem.Specific;
                                    string ShedCode = oCombo.Selected.Value;
                                    ldna_Rec = clsAddOn.LDNA_Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset);
                                    string strQuery1 = "select LineId from [@CBF_FAR1] where U_ShedCd = " + ShedCode;
                                    ldna_Rec.DoQuery(strQuery1);
                                    oChild1 = oChildren1.Item(ldna_Rec.Fields.Item("LineId").Value - 1);
                                    oChild1.SetProperty("U_Status", "Ready For Schedule");
                                    //Update the UDO Record
                                    oGeneralService1.Update(oGeneralData1);
    Please Help me it is an urgent requirement,
    -Regards
    Vikas

    hi.
    Error is - "Invalid row"
    Now i am updating  the last record of child table through Code  (Line id is 5)  from other form, then i got error  invalid row.
    As per my knowledge
    What i understood is you have 5 lines and you are going to be update 5th line
    am i correct..
    while u are updating the line in child table
    you have to consider like this..
    line number         u have to update like
    1                                        0
    2                                        1
    3                                        2
    4                                        3
    5                                        4
    which means in child table treat
    line 1  as 0
    line 2 as  1
    line 5 as 4
    If you want to update the line 5 u have to mention 4 th line

  • Error while updating the firmware

    I have X4500 running solaris 10 OS with software version 5.10. The ILOM version is 1.1.1. I tried to update the firmware but I cannot do that because I am getting an error. This is how I setup everything and I get the error mentioned below.
    C H A P T E R 1 - Flash Upgrading Your Server to Software Release 1.2
    I referred to the above link to do so. But, I do not understand what is the tftpserver that I need to mention here. I get an error message saying gethostbyname() failed. I also setup tftp server on my solaris machine using the following link.
    A P P E N D I X C - Updating the Firmware
    Please, help me.

    ILOM <1.1.8 was pretty flaky. 1.0 was described to me by a Sun CSE as the worst piece of software they ever released. I beg to differ, having been forced to use YP and rpc.lockd in the past but I digress ...
    o) Are you sure that you're getting the right firmware image? You want the x4500-specific images here: http://www.sun.com/servers/x64/x4500/downloads.jsp Be careful not to mix up x4100/x4200, x4100m2/x4200m2, x4600, x4500, etc. files as they are different
    o) Do a "show /SYS/MB" before updating your firmware and stash the output. Updates from 1.x versions of ILOM have a way of wiping the system serial and part numbers. If you record that info first you can repair after the fact.
    o) Do a "reset /SP" to reset the service processor before attempting the update. 1.x versions of ILOM, especially <=1.1.1, seem to upgrade more reliably when they're freshly booted
    o) Be sure that /SYS is stopped before you update ILOM
    o) You don't specify what command you're using to try to update, but I suspect that you're trying something like
    load -source tftp://some.host.domain/file.ima
    given the gethostbyname error. Give it the ip address of the tftp server not the FQDN.

  • Error while updating the records through a DB link

    Hi ,
    I am getting the below error while updating around 15 thousands records, i suspect it to be timeout but not sure.Please can you let me know what solutions needs to be taken.
    Not Found
    The requested URL /pls/htmldb/wwv_flow.show was not found on this server.
    Not Found
    The requested URL /pls/htmldb/wwv_flow.show was not found on this server.
    Oracle-Application-Server-10g/10.1.2.0.0 Oracle-HTTP-Server Server at htmldb.oraclecorp.com Port 80
    Object Type TABLE Object GWB_GRN_GRP_COUNTRIES_LU
    Table Column Data Type Length Precision Scale Primary Key Nullable Default Comment
    GWB_GRN_GRP_COUNTRIES_LU NAME Varchar2 720 - - - - - -
    ALIAS Varchar2 720 - - - - - -
    ACTIVE Varchar2 3 - - - - - -
    REGION Varchar2 300 - - - - -
    1 - 4
    Thanks & Regards,
    Ramu

    Hi Sangu,
    See if the following notes help you:
    Error when calling API from SQL*Developer, eg. ORA-01403 in API OE_ORDER_PUB.PROCESS_ORDER (Doc ID 1054295.1)
    Cancellation Of Transfer Orders Is Not Possible - ORA-01403: no data found in Package OE_Order_PVT Procedure Process_Order (Doc ID 391307.1)
    Thanks &
    Best Regards,

  • Getting Error while Updating the ESB Default System

    Hi,
    We applied patch 7272722 and have upgraded the SOA Suite 10.1.3.1 to SOA Suite 10.1.3.4 on Windows (32 Bit).
    After upgrading , we are getting below error message while updating the Default System properties in ESB Console.
    An unhandled exception has been thrown in the ESB system. The exception reported is: "oracle.tip.esb.console.exception.ConsoleTransactionException: File repository not initialized.May be ESB bootstrap failed Please review ESB prameters for their correctness. at oracle.tip.esb.console.XMLConsoleManagerImpl.commit(XMLConsoleManagerImpl.java:2317) at oracle.tip.esb.console.XMLConsoleManagerImpl.updateSystemInRepository(XMLConsoleManagerImpl.java:882) at oracle.tip.esb.console.XMLConsoleManagerImpl.updateSystemFromElement(XMLConsoleManagerImpl.java:578) at oracle.tip.esb.console.XMLConsoleManagerImpl.updateSystem(XMLConsoleManagerImpl.java:556) at oracle.tip.esb.configuration.servlet.command.UpdateSystemCommand.execute(UpdateSystemCommand.java:61) at oracle.tip.esb.configuration.servlet.CommandServlet.doJob(CommandServlet.java:109) at oracle.tip.esb.configuration.servlet.CommandServlet.doPost(CommandServlet.java:76) at javax.servlet.http.HttpServlet.service(HttpServlet.java:763) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64) at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:400) at java.security.AccessController.doPrivileged(Native Method) at javax.security.auth.Subject.doAsPrivileged(Subject.java:517) at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595) ".
    We are also deploying new BPEL process but they are also not displayed on ESB Console.
    Please let us know how we can resolve the error.
    Thanks
    Udit

    Dear Laxmi Narayan,
    This error would occur, if you miss Business Area/Section Code at the time of Invoice.
    The following thread should answer your query:
    Extended W/H Tax
    Regards,
    Naveen.

  • Error while updating the Assignment details using 'hr_assignment_api'

    An exception message is thrown while updating the assignment details through 'hr_assignment_api.update_emp_asg'.
    The message is 'ORA-20001: HR_FLEX_VALUE_MISSING: N, COLUMN, ASS_ATTRIBUTE6, N, PROMPT'.
    Even though a valid value is being passed to the segement,the error is thrown.
    I have tested the API in one instance and it is working fine. Recently I have migrated the codes to nother instance and encountered this error. The only difference is that in the newer instance, the segment is mandatory.
    One interesting thing is that, When I update the Assignment through application it is successfully saving the record. Then if I use the API to correct the Assignment, it is working fine. The API is not able to update only when the mandatory segment is null.
    Please help
    Thanks in advance
    Kumar

    Pl post details of OS, database and EBS versions, along with HR RUP level. It may be a bug, as outlined in MOS Doc 429169.1 (When Calling the Assignment API To Update Position, It Errors in Required Segment)
    HTH
    Srini

  • While updating the software of my iphone 4 it just stop and restart and keep doing this

    While upgrading the software of my iphone 4 it just stop updating and the apple screen appear then it just turn on and off on the apple screen..i try the sleep mode and turn it off but when it turn on it goes on the apple screen and restart on and off..tell me what to do please....i try everything reseting while conecting through usb etc..

    Your screen is probably broken in that area and the "ink spot" you think you see is LCD liquid on the inside of the panel that's leaked and spread out.

  • Error while updating the forecast value in M.Master through RMDATIND

    Hi All
    Good Day
      In my custom Program I am using the three structures bgr00,bmm00,bmmh1 & bmmh3 and through rmdatind(Direct input method) program, i am trying to update the forecast value in material master data
    and i am getting error message as Specify a tracking limit and i have taken the tracking limit as 4 in my program.
    Actually there are 2 fields exists for tracking limit in structure bmmh1
    1.SIGGR and
    2.SIGG2
    I had given the  input as 4 for these 2 fields but I am getting the same error message Specify a tracking limit
    Can anyone please help me in this case.
    Thanks in advance.
    Cheers
    Vallabhaneni

    debug your program.
    Compare the field content of the value in the field you submitted with the content in field that is checked  when message M3 456 is issued.

  • Error while updating the sales order through Process Order API

    Hi,
    Please any one will help plz.
    I am updating the promise_date through oe_order_pub.process_order(Process Order API) i am getting the following error.
    FND_AS_UNEXPECTED_ERROR N PKG_NAME OE_Order_Cache N PROCEDURE_NAME get_tax_calculation_flag N ERROR_TEXT ORA-01403:no data found
    Please any one will help plz
    Below is my code.
    Declare      
    l_archive_file_name VARCHAR2(1000);
    l_shipment_exists NUMBER:=0;
    l_header_id NUMBER;
    l_line_id NUMBER;
    p_header_rec Oe_Order_Pub.Header_Rec_Type;
    l_line_tbl oe_order_pub.line_tbl_type := oe_order_pub.g_miss_line_tbl;
    l_header_rec OE_ORDER_PUB.Header_Rec_Type;
    l_header_val_out_rec OE_ORDER_PUB.Header_Val_Rec_Type;
    l_header_adj_out_tbl OE_Order_PUB.Header_Adj_Tbl_Type;
    l_header_adj_val_out_tbl OE_Order_PUB.Header_Adj_Val_Tbl_Type;
    l_header_price_att_out_tbl OE_ORDER_PUB.Header_Price_Att_Tbl_Type;
    l_header_adj_att_out_tbl OE_ORDER_PUB.Header_Adj_Att_Tbl_Type;
    l_header_adj_assoc_out_tbl OE_ORDER_PUB.Header_Adj_Assoc_Tbl_Type;
    l_header_scredit_out_tbl OE_Order_PUB.Header_Scredit_Tbl_Type;
    l_header_scredit_val_out_tbl OE_Order_PUB.Header_Scredit_Val_Tbl_Type;
    l_line_rec OE_ORDER_PUB.line_rec_type;
    l_line_out_tbl OE_ORDER_PUB.Line_Tbl_Type;
    l_line_val_out_tbl OE_ORDER_PUB.Line_Val_Tbl_Type;
    l_line_adj_out_tbl OE_ORDER_PUB.Line_Adj_Tbl_Type;
    l_line_adj_val_out_tbl OE_ORDER_PUB.Line_Adj_Val_Tbl_Type;
    l_line_price_att_out_tbl OE_ORDER_PUB.Line_Price_Att_Tbl_Type;
    l_line_adj_att_out_tbl OE_ORDER_PUB.Line_Adj_Att_Tbl_Type;
    l_line_adj_assoc_out_tbl OE_ORDER_PUB.Line_Adj_Assoc_Tbl_Type;
    l_line_scredit_out_tbl OE_Order_PUB.Line_Scredit_Tbl_Type;
    l_line_scredit_val_out_tbl OE_Order_PUB.Line_Scredit_Val_Tbl_Type;
    l_lot_serial_out_tbl OE_Order_PUB.Lot_Serial_Tbl_Type;
    l_lot_serial_val_out_tbl OE_Order_PUB.Lot_Serial_Val_Tbl_Type;
    l_action_request_out_tbl OE_Order_PUB.Request_Tbl_Type;
    l_msg_count NUMBER;
    l_msg_data VARCHAR2(2000);
    l_return_status VARCHAR2(1);
    l_index NUMBER;
    l_rows_processed NUMBER:=0;
    l_line_mawb VARCHAR2(240);
    l_line_hawb VARCHAR2(240);
    l_line_flight_num VARCHAR2(240);
    l_org_id NUMBER :=143;--FND_GLOBAL.ORG_ID;
    l_resp_id NUMBER:=FND_GLOBAL.RESP_ID;
    l_resp_appl_id NUMBER:=FND_GLOBAL.RESP_APPL_ID;
    l_user_id number := FND_GLOBAL.USER_ID;
    l_promise_date date;
    BEGIN
    SELECT ol.org_id, oh.header_id, ol.line_id,ol.promise_date
    INTO l_org_id, l_header_id, l_line_id,l_promise_date
    FROM apps.oe_order_headers_all oh, apps.oe_order_lines_all ol
    WHERE ol.header_id=oh.header_id
    AND ol.line_id =1319526; --&line_id
    -- apps.fnd_global.apps_initialize(&l_USER_ID,&l_resp_id,&l_resp_appl_id);
    apps.fnd_global.apps_initialize(67778,51017,660);
    p_header_rec := OE_ORDER_PUB.G_MISS_HEADER_REC;
    p_header_rec.header_id :=835035;-- l_header_id;
    p_header_rec.operation := OE_GLOBALS.G_OPR_UPDATE;
    l_line_tbl := oe_order_pub.g_miss_line_tbl;
    -------------------------Line Record -------------------------------
    l_line_tbl(1) := oe_order_pub.g_miss_line_rec;
    l_line_tbl(1).header_id := 835035;
    l_line_tbl(1).line_id := 1319526;
    l_line_tbl(1).promise_date := sysdate;
    l_line_tbl(1).operation := oe_globals.g_opr_update;
    BEGIN
    apps.oe_order_pub.process_order
    (p_api_version_number => 1.0
    ,p_init_msg_list => fnd_api.g_true
    ,p_return_values => fnd_api.g_true
    ,x_return_status => l_return_status
    ,x_msg_count => l_msg_count
    ,x_msg_data => l_msg_data
    ,p_header_rec => p_header_rec
    ,p_line_tbl => l_line_tbl
    -- out variables
    ,x_header_rec => l_header_rec
    ,x_header_val_rec => l_header_val_out_rec
    ,x_header_adj_tbl => l_header_adj_out_tbl
    ,x_header_adj_val_tbl => l_header_adj_val_out_tbl
    ,x_header_price_att_tbl => l_header_price_att_out_tbl
    ,x_header_adj_att_tbl => l_header_adj_att_out_tbl
    ,x_header_adj_assoc_tbl => l_header_adj_assoc_out_tbl
    ,x_header_scredit_tbl => l_header_scredit_out_tbl
    ,x_header_scredit_val_tbl => l_header_scredit_val_out_tbl
    ,x_line_tbl => l_line_out_tbl
    ,x_line_val_tbl => l_line_val_out_tbl
    ,x_line_adj_tbl => l_line_adj_out_tbl
    ,x_line_adj_val_tbl => l_line_adj_val_out_tbl
    ,x_line_price_att_tbl => l_line_price_att_out_tbl
    ,x_line_adj_att_tbl => l_line_adj_att_out_tbl
    ,x_line_adj_assoc_tbl => l_line_adj_assoc_out_tbl
    ,x_line_scredit_tbl => l_line_scredit_out_tbl
    ,x_line_scredit_val_tbl => l_line_scredit_val_out_tbl
    ,x_lot_serial_tbl => l_lot_serial_out_tbl
    ,x_lot_serial_val_tbl => l_lot_serial_val_out_tbl
    ,x_action_request_tbl => l_action_request_out_tbl
    --dbms_output.put_line('l_msg_data-->' ||l_msg_data ||' l_return_status --> ' ||l_return_status);  
    END;
    commit;
    END;
    Regards,
    Sangu

    Hi Sangu,
    See if the following notes help you:
    Error when calling API from SQL*Developer, eg. ORA-01403 in API OE_ORDER_PUB.PROCESS_ORDER (Doc ID 1054295.1)
    Cancellation Of Transfer Orders Is Not Possible - ORA-01403: no data found in Package OE_Order_PVT Procedure Process_Order (Doc ID 391307.1)
    Thanks &
    Best Regards,

  • Need help - Error while updating the firmware of Muvo Slim using the recovery t

    Hi ,
    While I am trying to update my Muvo slim firmware using the recovery tool it throwd up an error. And from then onwards if I am trying to power it up it won't.
    If I again try to update the firmware, it throws up the error that "Unable to Write to Device: Device Time out".
    I am afraid that my Muvo slim got bricked. Can you please help me in recovering the same.
    PS: My PC OS is Windows XP.
    Thank & Regards
    ksraghava?

    On my XP system, the last time I wanted to reload the firmware, I had to remove all of my Creative software programs,?and then revert my Windows Media Player back to 0 and then use The Recovery Tool. It is a bit of a pain, but does seem to work when you are getting errors with the firmware download.
    luvmyrescuedogs
    Almost forgot. Make sure your player is fully charged or has a fresh battery before starting any firmware download.
    Message Edited by luvmyrescuedogs on 06-4-2008 :6 AM

Maybe you are looking for