Error while updating to DSO

Hi gurus
My DTP fails wheni update data from PSA to DSO..the error simply says:
"Data Package 1: Errors During Processing".
processing terminated.....
And i am unsble to drill down any further to get the exact reason behind the error...but when i check the data in PSA for one of the records in PSA The field 'RECORDMODE', the value is D whereas for all other records there is no value mentioned ..could this be the reason for the failure.....kindly share your thoughts..points will be awarded...

Hi,
Try checking for the job log of the corresponding process for the error in transaction SM37.
Hope this will be expedite
Thax & Regards
Vaibhave Sharma

Similar Messages

Error while updating to target

Hi Friends,
Im trying to load the data from the DSO to the cube, while loading the data im getting a error "Error while updating to target CUBE Name".
when i check the message in error stack im getting this "Value 'Complaints Resolution for Activity ' (hex. '0043006F006D0070006C00610069006E007400730020005200') of characteristic ZWF_NAME BRAIN 60"
I found a notEe 1148007, this not says that
"A program to write data is generated for each InfoCube that contains data (type "Standard"). The name of this program is stored in the table RSDCUBELOC. When you activate an InfoCube again, the name of this program may inadvertently be deleted.
In the DTP monitor, this error occurs in the "Update" step and message RSBK 241 is displayed: "Error while updating to target G7SD0C05 (type INFOCUBE)"
I have checked the table RSDCUBELOC and i can see the program entry there and after that i have reactivated the cube and reloaded the data but im still getting the same issue.
Can anyone pls suggest me how to resolve this issue?.
Thanks in advance
BN

Hi,
It is issue with the Lowe case letters of a particular info object. You have to write a routine to convert those lower into upper.
reason is if you chack IOB properties Lower case might be unchecked and the data you are getting in lower case.
Let us know the details if you still have any issues.
Reg
Pra

Error while updating infocube

Dear bw gurus,
I have encountered a load problem. The source is a DSO and the target is Infocube. When i execute the DTP (DSO->Infocube), it hits an error. There is no error log and nothing in the error stack. The error from the monitor was right after the data package execution saying 'Error while updating Infocube XXX'.
I tried to check tcode SM21 and ST22. No system log and short dump at all. I have tried to run in debug mode (Simulation), nothing is wrong with the transformation (start and end routine) code
Appreciate if you can provide me some hints on this. I hope to resolve this as soon as possible. I need to get this cube loaded for the UAT in 3 days time.
Thanks.

Hi Krishna,
I have checked the Background job, no error at all. This error is at the updating level. Thanks!
Hi Sri
We are using support package level 0017 (SAPKW70017). Can i know what issues you have for DTPs? Is it the same issue?
Thanks a lot!
Regards,
Dianna

Error while updating data from DataStore object

Hi,
Currently we are upgrading BW3.5 to BI7.0 for technical only,
we found and errors during process chain run in further processing step. This step is basically a delta loading from DSO to Cube.
The error message are:
Error while updating data from DataStore object 0GLS_INV
Message no. RSMPC146
Job terminated in source system --> Request set to red
Message no. RSM078
That's all no further errors message can be explained clearly here from system.
I have applied SAP note 1152453 and reactivate the datasource, infosource, and data target.
Still no help here!?
Please advise if you encountered these errors before.
Thanks in advance.
Regards,
David
Edited by: David Tai Wai Tan on Oct 31, 2008 2:46 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:50 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:52 PM

Hi Vijay,
I got this error:
Runtime Errors         MESSAGE_TYPE_X
Date and Time          04.11.2008 11:43:08
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Short text of error message:
No start information on process LOADING
Long text of error message:
Diagnosis
      For process LOADING, variant ZPAK_0SKIJ58741F4ASCSIYNV1PI9U, the
      end should be logged for instance REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX
      under the log ID D4FIDCBHXPLZMP5T71JZQVUWX. However, no start has
      been logged for this process.
System Response
      No log has been written. The process (and consequently the chain)
      has been terminated.
Procedure
      If possible, restart the process.
Procedure for System Administration
Technical information about the message:
Message class....... "RSPC"
Number.............. 004
Variable 1.......... "D4FIDCBHXPLZMP5T71JZQVUWX"
Variable 2.......... "LOADING"
Variable 3.......... "ZPAK_0SKIJ58741F4ASCSIYNV1PI9U"
Variable 4.......... "REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX"
Any idea?

Error while updating a plan

Hi,
I have encountered an error while updating a plan. While i update the uplan , the grid gets filled but it throws a message stating
"Maximum Number of Result Blocks has been reached"
Maximum number of Result Blocks has been reached.
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0xD4]
Error while processing the data for the step 'Grid'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Maximum number of Result Blocks has been reached.
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0xD4]
Error while processing the data for the step 'Grid'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Update of Plan "deposittest created 7/19/2007 5:11:50 PM" failed.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0xD5]
The data updation stops after the row count 49900.
Please help to resolve this error .
Thanks in advance.
Regards,
Lathika

Hi,
in BAM-Administrator you should rraise Parameter "MaxResultBlocks".
BAM originaly is al licensed Software from Group1 named "Sagent Data Flow".
This may help searching the web.
Greetz,
GOI

Error while updating to iOS 6.1.2

Error while updating software to iOS 6.1.2

what is the error? if you want help you need to provide some details.

Error While updating info in the People Form-Additional Personla Details

Hi All,
Iam getting an Error While updating information in the People Form,Additional Personla Details DFF.
Error Like:
APP-PER-289974:There has been an error Processing this person,The error encountered is 'ORA-20001:HZ_STNC_SQL_EXCEP:N,PROC.sync_Person,N,ERROR.ORA-25153:Temporary Tablespace is empty ,N,POO,1265890',which occured in procedure per_htrca_merge_tca_person at step10.
Please contact your support represntative.
Thanks -
Sowmya

Thanks you,
By this Note id:395136.1
Iam unable to find this Set profile 'HZ: Generate Events for DQM Real-Time Synchronization' to No
with this Note id:278422.1
We are unable to find this proifle option : HZ: Data Sharing and Security Enabled profile
we are using applications 11i.
please help to find this Profile option.
But with this note id:ID 395136.1
This is Working.
Query for HZ: DQM Synchronization Method profile. Set the value to Disable.
But iam facing proble while uploding data to DFF ,Error--SQL exception occurred during PL/SQL upload.
Thanks for the Support-
Sowmya.
Edited by: user13419037 on Aug 11, 2011 11:53 PM
Edited by: user13419037 on Aug 12, 2011 12:03 AM
Edited by: user13419037 on Aug 12, 2011 3:45 AM

Error while updating the content in workflow

Hi,
I'm getting an error while updating the content in workflow thru the checkout option. i.e. contributor checks in the content - reviewer rejects the content - then contributor checks out and modifies the content as per the reviewer's remarks and while checking in the following error occurs
Content Server Request Failed
Unable to check in content item 'HO000128' for workflow. Unable to execute service method 'checkInUpdateRevByID'. (System Error: Runtime error: java.lang.NullPointerException
at intradoc.server.DocServiceHandler.checkInRevByID(DocServiceHandler.java:248)
at intradoc.server.DocServiceHandler.checkInUpdateRevByID(DocServiceHandler.java:240)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:293)
at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
at intradoc.server.Service.doCodeEx(Service.java:490)
at intradoc.server.Service.doCode(Service.java:472)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
at intradoc.server.Service.doAction(Service.java:452)
at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
at intradoc.server.Service.doActions(Service.java:447)
at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1071)
at intradoc.server.Service.executeSubServiceCode(Service.java:3497)
at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:942)
at intradoc.server.Service.executeServiceEx(Service.java:3492)
at intradoc.server.Service.executeService(Service.java:3476)
at intradoc.server.DocServiceHandler.determineWorkflowCheckin(DocServiceHandler.java:3833)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:293)
at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
at intradoc.server.Service.doCodeEx(Service.java:490)
at intradoc.server.Service.doCode(Service.java:472)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
at intradoc.server.Service.doAction(Service.java:452)
at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
at intradoc.server.Service.doActions(Service.java:447)
at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1071)
at intradoc.server.Service.executeSubServiceCode(Service.java:3497)
at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:942)
at intradoc.server.Service.executeServiceEx(Service.java:3492)
at intradoc.server.Service.executeService(Service.java:3476)
at intradoc.server.Service.doSubService(Service.java:3465)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:279)
at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:264)
at intradoc.server.Service.doCodeEx(Service.java:507)
at intradoc.server.Service.doCode(Service.java:472)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
at intradoc.server.Service.doAction(Service.java:452)
at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
at intradoc.server.Service.doActions(Service.java:447)
at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1121)
at intradoc.server.Service.executeActions(Service.java:433)
at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:635)
at intradoc.server.Service.doRequest(Service.java:1707)
at intradoc.server.ServiceManager.processCommand(ServiceManager.java:359)
at intradoc.server.IdcServerThread.run(IdcServerThread.java:197))
Please help to resolve.
Thanks in advance
Prasad

I also get error while updating the content in workflow thru the checkout option as reviewer. i.e. contributor checks in the content - then reviewer either updates the metadata or checks out and modifies the content and while checking in the following error occurs
Content Server Request Failed
Unable to update the content item information for 'HO000128'.
The content ID must be specified.
Please help to resolve.
Thanks in advance
Prasad

Error while updating my WP

Hi, I have got an error while updating my WP on lumia 800? the error code is 80070002. how to resole

@RoukailaRedouane
Similar issue raised here with referral to resource below:http://answers.microsoft.com/en-us/winphone/forum/wp7-sync/error-80070002-occurred-when-checking-upd...
More information can be found here:http://support.microsoft.com/kb/910336/en-us
Happy to have helped forum with a Support Ratio = 42.5

Error while updating phone button template in CUCM 8.6

Experts,
I'm getting following error while updating phone button template in CUCM 8.6;
Update failed. java.sql.SQLException: System catalog (sysprocbody) corrupted.
Please check the screen shot attached here with.
What could be the reason?
Thanks
Vivek

I'm not a Cisco employee, so I can't do anything with your backup.!
You need to take a backup as a precaution (You should have been doing this anyway) Then you need to call Cisco TAC to get the underlying problem fixed. CalManager is a locked-down environment, and only TAC can get the low-level access needed to fix database problems.
GTG

Error while updating decimal places in general settings

Hii All
         I have got an error while updating Decimal places in General Settings
Cannot update while another user is connected to the company i have checked, there is no other user logged in, i could add other settings but the problem is only with Decimal Places
Note : there are no postings yet, a fresh database for a new client
         what could be the possible reason
                                                             thanks
                                                                     RIYAZ

Hiii All
      As a forum rule, i have initially gone through with the existing threads and then i was force to post a thread,
          would be helpfull if there is any other way..
                                            Thanks
                                                     RIYAZ

Error while updating patch level 11 of HR

Dear All,
I am getting following error while updating HR patch level 11.
Phase OBJECTS_LOCKED_?: Objects Locked in Requests
Request      Names of Locked Transport Objects
MRDK900089   LIMU REPS H99_POST_PAYMENT
             LIMU REPS RPCIPE00
MRDK900542   R3TR FORM HR_IN_TAXF16000Y
the above request is in other client, and it is a local request, which is not getting transported; i mean it does not allow to transport. give the following error.
Object messages: R3TR CINS 01200615322 0000824666
Transport objects from package PCPO to target MRP only
Object messages: R3TR NOTE 0000970953
Transport objects from package PCPO to target MRP only
Object messages: LIMU METH CL_HRPAY99_POSTING_LOG DATA_TOP_FILL_TEXT
Transport objects from package PCPO to target MRP only
Object messages: LIMU METH CL_HRPAY99_POSTING_LOG PUT_PERNR_INFO
Transport objects from package PCPO to target MRP only
Object messages: LIMU REPS H99_POST_PAYMENT
Transport objects from package PCPO to target MRP only
Please help me how to rectify.
Thanks n regards
Bhaskar

Hello Bhaskar,
is the transport already approved?
If not approve it and try it again. (also it is a local one)
If not check the objects and unlock them manually the following way:
SE03 => Unlock Objects (Expert Tool)
But if you approve your transport... the objects should be unlocked.
Regards
Stefan

Error while updating data from PSA to ODS

Hi Sap Gurus,
I am facing the error while updating data from PSA to ODS in BI 7.0
The exact error message is:
The argument 'TBD' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
Please suggest how to proceed on this issue.
Points will be awarded.

Hi ,
Try to simulate the process.That can give you exact error location.
It seems like while updating few records may be no in the format of the field in which it is updated.
Regards
Rahul Bindroo

Error while updating account dim

I get the below error while updating the Outline Account Dim.This error occurs only when updating account dim. It does not happen with other dimensions. So it doesn't seem to be the connection being down. If we recycle the analytics server. But we are not able to find out the actual cause for this issue.
Error message:
Cannot build dimension. Analytic Server Error(1042017): Network error: The client or server timed out waiting to receive data using TCP/IP. Check network connections. Increase the NetRetryCount and/or NetDelay values in the ESSBASE.CFG file. Update this file on both client and server. Restart the client and try again
Additional information
Account is defined as dense dimesion with 1800 level 0 members. We are updating this using rules file.
Potential Number of Data Blocks : 27762609853440
Number of Existing Data Blocks : 2625360
Index Cache: 40960
Data cache : 20480
I appreciate any help in resolving this issue

There is probably something in your dim build source file that Essbase doesn't like and isn't giving you a good error message. Did this dim build work in the past and you recently added something to it?
Try excluding certain columns like member properties and data storage just to see if you can get the members to load. Then slowly bring back in the other columns to see if you find the one that has the problem. Similarly try keeping all the columns but just try loading one record and see if it succeeds, this will help you start to narrow down if it is a load rule or source issue. Other option is to create a new load rule, perhaps there is something wrong with the one you are using.
Unfortunately there is no magic bullet here, you just have to work through small samples to try and isolate what the problem is.

Error While updating Process form data Using Scheduler

Hi All,
I am trying to update Process form data (ex : lastname) using a scheduled task Code. I am getting Error while updating Field.
Code :
HashMap<String, String> map = new HashMap<String, String>();
map.put("UD_EBS_PF_LASTNAME", "lastname");
formintf.setProcessFormData(instancekey, map); //I AM GETTING AT THIS LINE
Saying
Thor.API.Exceptions.tcAPIException: The following required fields have not been given values:EBS IT Resource : The following required fields have not been given values:EBS IT Resource
    at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
    at Thor.API.Operations.tcFormInstanceOperationsIntfEJB_h6wb8n_tcFormInstanceOperationsIntfRemoteImpl_1036_WLStub.setProcessFormDatax(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
    at $Proxy2.setProcessFormDatax(Unknown Source)
    at Thor.API.Operations.tcFormInstanceOperationsIntfDelegate.setProcessFormData(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at Thor.API.Base.SecurityInvocationHandler$1.run(SecurityInvocationHandler.java:68)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.security.Security.runAs(Security.java:41)
    at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(weblogicLoginSession.java:52)
    at Thor.API.Base.SecurityInvocationHandler.invoke(SecurityInvocationHandler.java:79)
    at $Proxy3.setProcessFormData(Unknown Source)
    at com.wyndham.tasks.AssignRandomPasswordToAllUsersSchedulerTest.execute(AssignRandomPasswordToAllUsersSchedulerTest.java:182)
    at com.wyndham.tasks.AssignRandomPasswordToAllUsersSchedulerTest.main(AssignRandomPasswordToAllUsersSchedulerTest.java:63)
Caused by: Thor.API.Exceptions.tcAPIException: The following required fields have not been given values:EBS IT Resource : The following required fields have not been given values:EBS IT Resource
    at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.setProcessFormData(tcFormInstanceOperationsBean.java:761)
    at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.setProcessFormData(tcFormInstanceOperationsBean.java:426)
    at Thor.API.Operations.tcFormInstanceOperationsIntfEJB.setProcessFormDatax(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

Is that possible there was the field ZDATE in your form interface/ context and now it is not? I guess some source has changed so the field in the form (binding to the not existing field) cannot be processed. Otto

Error while updating to DSO

Similar Messages

Maybe you are looking for