Error while updating to target 0PUR_C01 (type INFOCUBE)

Dear Friends
I am facing the problem while loading data through DTP from PSA to cube(Target).Problem occurring is at 0FISCPER.
The error shown is as below:
Data Package 2: Errors During Processing >>> Updating to InfoCube 0PUR_C01 >>
Error while updating to target 0PUR_C01 (type INFOCUBE)
Messages for 101 data records saved; request is red acc. to configuration
Processing Terminated
display for error records: No fiscal year variant specified
DTP request location:
Error Location: Operation Type: VAL_SID_CONVERT
Error Location: Operation Name: 0FISCPER
please give me helpful suggestion. I m w8ing for ur reply. I need ur needful comments.

Yes it is direct mapping with Entry date (SYDAT). But how should i solve this problem.
In PSA, for that Entry date giving the values:
11.02.2009
12.02.2009
13.02.2009
14.02.2009
16.02.2009
17.02.2009
18.02.2009
21.02.2009
23.02.2009
25.02.2009
03.03.2009
05.03.2009

Similar Messages

Error while updating to target i.e., InfoCube

Hi All,
I am getting error as "
Char value CPV does not exist in the master data table of char ' 0SALES_UNIT' .Therefore this value could not be transformed into internal SID"
Do let me know the soln for above error ,
Regards,
Anjali Singh

Hi ,
1. Go to the Update tab of the normal DTP and there you can find the create Error DTP option .Click on that .
2. This will take you to the Error DTP screen .Use the option 'Valid record updated reporting possible (request green).You can increase the number of errorneous records to be avoided there only .
3. Please make sure you have activated the option of ' Valid records update reporting possible request green ' both in the Normal and Error DTP .Also the number of errorneous records to be avoided to be mentioned in both the DTP's.
4. Activate the DTP's (Both Normal and Error) .
After this can you please run the Normal DTP again .You can check the Error stack to see the errorneous records .When you double click on any record in the error stack it will thrown an error message from where you can find the exact error with those records .You can rectify these records in the error stack and then run the error DTP to update the same to the data target.
If still you are not able to identify the error details properly then run the DTP in simulation mode for the errorneous records to get some more details .
Please try this and update accordingly later.
Regards
Kamal mehta

Error while updating to target type INFOCUBE

Hi,
After BI SP16 Upgrade, we noticed that data load to a cube with DTP (7X DS) with partioning active, it would error out saying, "Error while updating to target " " type INFOCUBE....we applied note '1148007' and did reactivation of related structures and objects but still same error....As soon as we deactivate partioning, data load would go thru easily and successfully but we want to have partioning "Active"......I was wondering if anybody ran into this issue and get it resolved...Any help or helpful hints would be appreciated...
Thanks..

Hi,
take a look:
Error while updating to target ZXXX (type INFOCUBE)
Error while trying to make infoobject as data target
Regards
Andreas

Error while updating to target

Hi Friends,
Im trying to load the data from the DSO to the cube, while loading the data im getting a error "Error while updating to target CUBE Name".
when i check the message in error stack im getting this "Value 'Complaints Resolution for Activity ' (hex. '0043006F006D0070006C00610069006E007400730020005200') of characteristic ZWF_NAME BRAIN 60"
I found a notEe 1148007, this not says that
"A program to write data is generated for each InfoCube that contains data (type "Standard"). The name of this program is stored in the table RSDCUBELOC. When you activate an InfoCube again, the name of this program may inadvertently be deleted.
In the DTP monitor, this error occurs in the "Update" step and message RSBK 241 is displayed: "Error while updating to target G7SD0C05 (type INFOCUBE)"
I have checked the table RSDCUBELOC and i can see the program entry there and after that i have reactivated the cube and reloaded the data but im still getting the same issue.
Can anyone pls suggest me how to resolve this issue?.
Thanks in advance
BN

Hi,
It is issue with the Lowe case letters of a particular info object. You have to write a routine to convert those lower into upper.
reason is if you chack IOB properties Lower case might be unchecked and the data you are getting in lower case.
Let us know the details if you still have any issues.
Reg
Pra

Error while updating to target CUBE

Hi,gurus here.
I upload data from ODS into CUBE via DTP. The error happens:
Error while updating to target ZICMM0200 (type INFOCUBE)
Message no. RSBK241
Package 3 / 2011.11.21 07:05:07 / Status 'Processed with Errors'
Message no. RSBK257
I've implemented the note 0001148007 and 0001159978,they don't work.
Thanks,for your help.

Hi,
Please try this....
Data is not updated to Infocube (BI 7.0) when i load from flat file
RSBK257 - Status 'Processed with Errors' message in DTP

Error While Transferring Data rom PSA to Infocube

Hi Experts,
                 We are Loading Data from (2LIS_11_VAHDR ) From source system .
1. Data Transferred to PSA .
2. Transformation is activated.(mapping based on RSOSFIELDMAP table for transfomation)
3. While Executing DTP we are following Error Messages ,
* R7105 - The Object Name is not allowed to be Empty.
                   * RSBK241 - Error while updating to target OSD_CO3.
                   * RSBK229 - Data Package processing terminated.
Note: Even though we are getting error messages the data is transferred to infocube
We Need a Solution for Error ?
Thanks,
All.

Hi,
I am also got the same problem long back but i can not remeber exactly but that is problem with transformations in the form of may be for some key figures taht currency units not updating
or some of the fileds to info object transformations , check once again that data element and length of fields and info objects and activate once again, or just delete existed DTP , create new DTP between DS and Info cube and try to load.
Thanks & Regards,
Sathish

ERROR WHILE UPDATING TO INFOCUBE

Hi All,
I am using a flat file to load data from datasource into infocubes.The data reaches PSA tables with no errors but after the execution of DTP , the monitors shows up Error Updating to infocube, intitally I thought there could be some problem in the data format of certain fields in the flat file but everything looks to be correct, there are no errors in the transformation rules.
Here's the ST22 analysis :
what happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Termination occurred in the ABAP program "CL_RSAWBN_NAV_TRACE===========CP" -
in "DUMP".
The main program was "RSAWBN_START ".
In the source code you have the termination point in line 42
of the (Include) program "CL_RSAWBN_NAV_TRACE===========CM004".
I have been deleting requests from the infocube , datasources and deleting entries from PSA but always endup getting the "Error while updating to Infocube"
Have to figure out the solution as the planning team is waiting for me to copy the actual data to the plan cube
Thanks

Hi,
You should have the following format in the flatfile :
Considering today's date(18 Apr 2008) for example:
0CALDAY            20080418
0CALMONTH       200804
0FISCPER           0042008
0FISCPER3         0042008 (I think this can have additional periods as well, not sure though)
0FISCVARNT       No idea about this.
Reward with points if helpful.
Regards
Hemant Khemani

Error while updating infocube

Dear bw gurus,
I have encountered a load problem. The source is a DSO and the target is Infocube. When i execute the DTP (DSO->Infocube), it hits an error. There is no error log and nothing in the error stack. The error from the monitor was right after the data package execution saying 'Error while updating Infocube XXX'.
I tried to check tcode SM21 and ST22. No system log and short dump at all. I have tried to run in debug mode (Simulation), nothing is wrong with the transformation (start and end routine) code
Appreciate if you can provide me some hints on this. I hope to resolve this as soon as possible. I need to get this cube loaded for the UAT in 3 days time.
Thanks.

Hi Krishna,
I have checked the Background job, no error at all. This error is at the updating level. Thanks!
Hi Sri
We are using support package level 0017 (SAPKW70017). Can i know what issues you have for DTPs? Is it the same issue?
Thanks a lot!
Regards,
Dianna

Error while updating patch level 11 of HR

Dear All,
I am getting following error while updating HR patch level 11.
Phase OBJECTS_LOCKED_?: Objects Locked in Requests
Request      Names of Locked Transport Objects
MRDK900089   LIMU REPS H99_POST_PAYMENT
             LIMU REPS RPCIPE00
MRDK900542   R3TR FORM HR_IN_TAXF16000Y
the above request is in other client, and it is a local request, which is not getting transported; i mean it does not allow to transport. give the following error.
Object messages: R3TR CINS 01200615322 0000824666
Transport objects from package PCPO to target MRP only
Object messages: R3TR NOTE 0000970953
Transport objects from package PCPO to target MRP only
Object messages: LIMU METH CL_HRPAY99_POSTING_LOG DATA_TOP_FILL_TEXT
Transport objects from package PCPO to target MRP only
Object messages: LIMU METH CL_HRPAY99_POSTING_LOG PUT_PERNR_INFO
Transport objects from package PCPO to target MRP only
Object messages: LIMU REPS H99_POST_PAYMENT
Transport objects from package PCPO to target MRP only
Please help me how to rectify.
Thanks n regards
Bhaskar

Hello Bhaskar,
is the transport already approved?
If not approve it and try it again. (also it is a local one)
If not check the objects and unlock them manually the following way:
SE03 => Unlock Objects (Expert Tool)
But if you approve your transport... the objects should be unlocked.
Regards
Stefan

Error while updating the records through a DB link

Hi ,
I am getting the below error while updating around 15 thousands records, i suspect it to be timeout but not sure.Please can you let me know what solutions needs to be taken.
Not Found
The requested URL /pls/htmldb/wwv_flow.show was not found on this server.
Not Found
The requested URL /pls/htmldb/wwv_flow.show was not found on this server.
Oracle-Application-Server-10g/10.1.2.0.0 Oracle-HTTP-Server Server at htmldb.oraclecorp.com Port 80
Object Type TABLE Object GWB_GRN_GRP_COUNTRIES_LU
Table Column Data Type Length Precision Scale Primary Key Nullable Default Comment
GWB_GRN_GRP_COUNTRIES_LU NAME Varchar2 720 - - - - - -
ALIAS Varchar2 720 - - - - - -
ACTIVE Varchar2 3 - - - - - -
REGION Varchar2 300 - - - - -
1 - 4
Thanks & Regards,
Ramu

Hi Sangu,
See if the following notes help you:
Error when calling API from SQL*Developer, eg. ORA-01403 in API OE_ORDER_PUB.PROCESS_ORDER (Doc ID 1054295.1)
Cancellation Of Transfer Orders Is Not Possible - ORA-01403: no data found in Package OE_Order_PVT Procedure Process_Order (Doc ID 391307.1)
Thanks &
Best Regards,

Error while updating budget plan for a user in peoplesoft

Hi All,
We are using peopletools 845 and app 8.8 some users are getting this wl error while updating some transactions in PS find the error below,
Message from the ISAPI plugin:
Cannot open TEMP file 'C:\WINDOWS\TEMP\_wl_proxy\_post_8500_4' for POST of 7328 bytes: GetLastError() 5
Build date/time: Oct 25 2004
Change Number: 452998
HTTP/1.1 500 Internal Server Error Connection: close Date: Wed, 10 Jun 2009 16:42:27 GMT Server: Microsoft-IIS/6.0 MicrosoftOfficeWebServer: 5.0_Pub X-Powered-By: ASP.NET Content-Type: text/html
Message from the ISAPI plugin:
Cannot read -1 bytes of postData from tmp file 'C:\WINDOWS\TEMP\_wl_proxy\_post_8500_4': GetLastError() 0
Build date/time: Oct 25 2004
Change Number: 452998
HTTP/1.1 500 Internal Server Error Connection: close Date: Wed, 10 Jun 2009 16:42:27 GMT Server: Microsoft-IIS/6.0 MicrosoftOfficeWebServer: 5.0_Pub X-Powered-By: ASP.NET Content-Type: text/html
Thanks in advance!

Hi,
Try having a look at this document
E-WL: Message From the ISAPI Plugin: "Cannot read 8192 bytes of postData from tmp file" [ID 664043.1]
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=PROBLEM&id=664043.1

Error while updating data from DataStore object

Hi,
Currently we are upgrading BW3.5 to BI7.0 for technical only,
we found and errors during process chain run in further processing step. This step is basically a delta loading from DSO to Cube.
The error message are:
Error while updating data from DataStore object 0GLS_INV
Message no. RSMPC146
Job terminated in source system --> Request set to red
Message no. RSM078
That's all no further errors message can be explained clearly here from system.
I have applied SAP note 1152453 and reactivate the datasource, infosource, and data target.
Still no help here!?
Please advise if you encountered these errors before.
Thanks in advance.
Regards,
David
Edited by: David Tai Wai Tan on Oct 31, 2008 2:46 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:50 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:52 PM

Hi Vijay,
I got this error:
Runtime Errors         MESSAGE_TYPE_X
Date and Time          04.11.2008 11:43:08
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Short text of error message:
No start information on process LOADING
Long text of error message:
Diagnosis
      For process LOADING, variant ZPAK_0SKIJ58741F4ASCSIYNV1PI9U, the
      end should be logged for instance REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX
      under the log ID D4FIDCBHXPLZMP5T71JZQVUWX. However, no start has
      been logged for this process.
System Response
      No log has been written. The process (and consequently the chain)
      has been terminated.
Procedure
      If possible, restart the process.
Procedure for System Administration
Technical information about the message:
Message class....... "RSPC"
Number.............. 004
Variable 1.......... "D4FIDCBHXPLZMP5T71JZQVUWX"
Variable 2.......... "LOADING"
Variable 3.......... "ZPAK_0SKIJ58741F4ASCSIYNV1PI9U"
Variable 4.......... "REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX"
Any idea?

Error while updating drivers, help

I've downloaded the new update drivers for X-Fi xtreme gamer soundcard and encountered the following error, while updating my X-Fi Pro sound card.
SetupDLL\SetupDLL.cpp (298)
aAPP:Sound Blaster X-Fi Drivers Web Release
PVENDOR:Creative Technology Ltd.
what should i do?

Click the support tab>Knowledge base and in the search box type in setupDll.cpp.
Dell XPS 600 Intel Pent D 830 3.0ghz
Chipset- Nvidia nForce4 SLI Intel Edition
WD 60gb HD
2gb Ram
DVD-ROM
DVD-RW (Plextor 760A)
Creative XF-I Extreme Music
Logitech X-540 speakers
EVGA 7950GT
Dell 2007WFP (I-SPS panel)
Win XP SP2
BIOS A

Error while updating a plan

Hi,
I have encountered an error while updating a plan. While i update the uplan , the grid gets filled but it throws a message stating
"Maximum Number of Result Blocks has been reached"
Maximum number of Result Blocks has been reached.
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0xD4]
Error while processing the data for the step 'Grid'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Maximum number of Result Blocks has been reached.
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0xD4]
Error while processing the data for the step 'Grid'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Update of Plan "deposittest created 7/19/2007 5:11:50 PM" failed.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0xD5]
The data updation stops after the row count 49900.
Please help to resolve this error .
Thanks in advance.
Regards,
Lathika

Hi,
in BAM-Administrator you should rraise Parameter "MaxResultBlocks".
BAM originaly is al licensed Software from Group1 named "Sagent Data Flow".
This may help searching the web.
Greetz,
GOI

Error while updating to iOS 6.1.2

Error while updating software to iOS 6.1.2

what is the error? if you want help you need to provide some details.

Error while updating to target 0PUR_C01 (type INFOCUBE)

Similar Messages

Maybe you are looking for