Error while updating to target CUBE

Hi,gurus here.
I upload data from ODS into CUBE via DTP. The error happens:
Error while updating to target ZICMM0200 (type INFOCUBE)
Message no. RSBK241
Package 3 / 2011.11.21 07:05:07 / Status 'Processed with Errors'
Message no. RSBK257
I've implemented the note 0001148007 and 0001159978,they don't work.
Thanks,for your help.

Hi,
Please try this....
Data is not updated to Infocube (BI 7.0) when i load from flat file
RSBK257 - Status 'Processed with Errors' message in DTP

Similar Messages

  • Error while updating to target

    Hi Friends,
    Im trying to load the data from the DSO to the cube, while loading the data im getting a error "Error while updating to target CUBE Name".
    when i check the message in error stack im getting this "Value 'Complaints Resolution for Activity ' (hex. '0043006F006D0070006C00610069006E007400730020005200') of characteristic ZWF_NAME BRAIN 60"
    I found a notEe 1148007, this not says that
    "A program to write data is generated for each InfoCube that contains data (type "Standard"). The name of this program is stored in the table RSDCUBELOC.  When you activate an InfoCube again, the name of this program may inadvertently be deleted.
    In the DTP monitor, this error occurs in the "Update" step and message RSBK 241 is displayed: "Error while updating to target G7SD0C05 (type INFOCUBE)"
    I have checked the table RSDCUBELOC and i can see the program entry there and after that i have reactivated the cube and reloaded the data but im still getting the same issue.
    Can anyone pls suggest me how to resolve this issue?.
    Thanks in advance
    BN

    Hi,
    It is issue with the Lowe case letters of a particular info object.  You have to write a routine to convert those lower into upper.
    reason is if you chack IOB properties Lower case might be unchecked and the data you are getting in lower case.
    Let us know the details if you still have any issues.
    Reg
    Pra

  • Error while updating to target type INFOCUBE

    Hi,
    After BI SP16 Upgrade, we noticed that data load to a cube with DTP (7X DS) with partioning active, it would error out saying, "Error while updating to target " " type INFOCUBE....we applied note '1148007' and did reactivation of related structures and objects but still same error....As soon as we deactivate partioning, data load would go thru easily and successfully but we want to have partioning "Active"......I was wondering if anybody ran into this issue and get it resolved...Any help or helpful hints would be appreciated...
    Thanks..

    Hi,
    take a look:
    Error while updating to target ZXXX (type INFOCUBE)
    Error while trying to make infoobject as data target
    Regards
    Andreas

  • Error while updating to target 0PUR_C01 (type INFOCUBE)

    Dear Friends
    I am facing the problem while loading data through DTP from PSA to cube(Target).Problem occurring is at 0FISCPER.
    The error shown is as below:
    Data Package 2: Errors During Processing  >>> Updating to InfoCube 0PUR_C01 >>
    Error while updating to target 0PUR_C01 (type INFOCUBE)
    Messages for 101 data records saved; request is red acc. to configuration
    Processing Terminated
    display for error records: No fiscal year variant specified
    DTP request location:
    Error Location: Operation Type: VAL_SID_CONVERT
    Error Location: Operation Name: 0FISCPER
    please give me helpful suggestion. I m w8ing for ur reply. I need ur needful comments.

    Yes it is direct mapping with Entry date (SYDAT). But how should i solve this problem.
    In PSA, for that Entry date giving the values:
    11.02.2009
    12.02.2009
    13.02.2009
    14.02.2009
    16.02.2009
    17.02.2009
    18.02.2009
    21.02.2009
    23.02.2009
    25.02.2009
    03.03.2009
    05.03.2009

  • Dead lock error while updating data into cube

    We have a scenario of daily truncate and upload of data into cube and volumes arrive @ 2 million per day.We have Parallel process setting (psa and data targets in parallel) in infopackage setting to speed up the data load process.This entire process runs thru process chain.
    We are facing dead lock issue everyday.How to avoid this ?
    In general dead lock occurs because of degenerated indexes if the volumes are very high. so my question is does deletion of Indexes of the cube everyday along with 'deletion of data target content' process help to avoiding dead lock ?
    Also observed is updation of values into one infoobject is taking longer time approx 3 mins for each data packet.That infoobject is placed in dimension and defined it as line item as the volumes are very high for that specific object.
    so this is over all scenario !!
    two things :
    1) will deletion of indexes and recreation help to avoid dead lock ?
    2) any idea why the insertion into the infoobject is taking longer time (there is a direct read on sid table of that object while observed in sql statement).
    Regards.

    hello,
    1) will deletion of indexes and recreation help to avoid dead lock ?
    Ans:
    To avoid this problem, we need to drop the indexes of the cube before uploading the data.and rebuild the indexes...
    Also,
    just find out in SM12 which is the process which is causing lock.... Delete that.
    find out the process in SM66 which is running for a very long time.Stop  this process.
    Check the transaction SM50 for the number of processes available in the system. If they are not adequate, you have to increase them with the help of basis team
    2) any idea why the insertion into the infoobject is taking longer time (there is a direct read on sid table of that object while observed in sql statement).
    Ans:
    Lie item dimension is one of the ways to improve data load as well as query performance by eliminationg the need for dimensin table. So while loading/reading, one less table to deal with..
    Check in the transformation mapping of that chs, it any rouitne/formula  is written.If so, this can lead to more time for processing that IO.
    Storing mass data in InfoCubes at document level is generally not recommended because when data is loaded, a huge SID table is created for the document number line-item dimension.
    check if your IO is similar to doc no...
    Regards,
    Dhanya

  • Error while updating to target i.e., InfoCube

    Hi All,
    I am getting error as "
    Char value CPV does not exist in the master data table of char ' 0SALES_UNIT' .Therefore this value could not be transformed into internal SID"
    Do let me know the soln for above error ,
    Regards,
    Anjali Singh

    Hi ,
    1. Go to the Update tab of the normal DTP and there you can find the create Error DTP option .Click on that .
    2. This will take you to the Error DTP screen .Use the option 'Valid record updated reporting possible (request green).You can increase the number of errorneous records to be avoided there only .
    3. Please make sure you have activated the option of ' Valid records update reporting possible request green ' both in the Normal and Error DTP .Also the number of errorneous records to be avoided to be mentioned in both the DTP's.
    4. Activate the DTP's (Both Normal and Error) .
    After this can you please run the Normal DTP again .You can check the Error stack to see the errorneous records .When you double click on any record in the error stack it will thrown an error message from where you can find the exact error with those records .You can rectify these records in the error stack and then run the error DTP to update the same to the data target.
    If still you are not able to identify the error details properly then run the DTP in simulation mode for the errorneous records to get some more details .
    Please try this and update accordingly later.
    Regards
    Kamal mehta

  • Error while updating infocube

    Dear bw gurus,
    I have encountered a load problem. The source is a DSO and the target is Infocube. When i execute the DTP (DSO->Infocube), it hits an error. There is no error log and nothing in the error stack. The error from the monitor was right after the data package execution saying 'Error while updating Infocube XXX'.
    I tried to check tcode SM21 and ST22. No system log and short dump at all. I have tried to run in debug mode (Simulation), nothing is wrong with the transformation (start and end routine) code
    Appreciate if you can provide me some hints on this. I hope to resolve this as soon as possible. I need to get this cube loaded for the UAT in 3 days time.
    Thanks.

    Hi Krishna,
    I have checked the Background job, no error at all. This error is at the updating level. Thanks!
    Hi Sri
    We are using support package level 0017 (SAPKW70017). Can i know what issues you have for DTPs? Is it the same issue?
    Thanks a lot!
    Regards,
    Dianna

  • Error while updating data from DataStore object

    Hi,
    Currently we are upgrading BW3.5 to BI7.0 for technical only,
    we found and errors during process chain run in further processing step. This step is basically a delta loading from DSO to Cube.
    The error message are:
    Error while updating data from DataStore object 0GLS_INV
    Message no. RSMPC146
    Job terminated in source system --> Request set to red
    Message no. RSM078
    That's all no further errors message can be explained clearly here from system.
    I have applied SAP note 1152453 and reactivate the datasource, infosource, and data target.
    Still no help here!?
    Please advise if you encountered these errors before.
    Thanks in advance.
    Regards,
    David
    Edited by: David Tai Wai Tan on Oct 31, 2008 2:46 PM
    Edited by: David Tai Wai Tan on Oct 31, 2008 2:50 PM
    Edited by: David Tai Wai Tan on Oct 31, 2008 2:52 PM

    Hi Vijay,
    I got this error:
    Runtime Errors         MESSAGE_TYPE_X      
    Date and Time          04.11.2008 11:43:08 
    To process the problem further, contact you SAP system       
    administrator.                                                                               
    Using Transaction ST22 for ABAP Dump Analysis, you can look  
    at and manage termination messages, and you can also         
    keep them for a long time.                                   
    Short text of error message:                                             
    No start information on process LOADING                                                                               
    Long text of error message:                                              
      Diagnosis                                                               
          For process LOADING, variant ZPAK_0SKIJ58741F4ASCSIYNV1PI9U, the    
          end should be logged for instance REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX    
          under the log ID D4FIDCBHXPLZMP5T71JZQVUWX. However, no start has   
          been logged for this process.                                       
      System Response                                                         
          No log has been written. The process (and consequently the chain)   
          has been terminated.                                                
      Procedure                                                               
          If possible, restart the process.                                   
      Procedure for System Administration                                                                               
    Technical information about the message:                                 
    Message class....... "RSPC"                                              
    Number.............. 004                                                 
    Variable 1.......... "D4FIDCBHXPLZMP5T71JZQVUWX"                         
    Variable 2.......... "LOADING"                                           
    Variable 3.......... "ZPAK_0SKIJ58741F4ASCSIYNV1PI9U"                    
    Variable 4.......... "REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX" 
    Any idea?

  • Error while updating patch level 11 of HR

    Dear All,
    I am getting following error while updating HR patch level 11.
    Phase OBJECTS_LOCKED_?: Objects Locked in Requests
    Request      Names of Locked Transport Objects
    MRDK900089   LIMU REPS H99_POST_PAYMENT
                 LIMU REPS RPCIPE00
    MRDK900542   R3TR FORM HR_IN_TAXF16000Y
    the above request is in other client, and it is a local request, which is not getting transported; i mean it does not allow to transport. give the following error.
    Object messages: R3TR CINS 01200615322 0000824666
    Transport objects from package PCPO to target MRP only
    Object messages: R3TR NOTE 0000970953
    Transport objects from package PCPO to target MRP only
    Object messages: LIMU METH CL_HRPAY99_POSTING_LOG DATA_TOP_FILL_TEXT
    Transport objects from package PCPO to target MRP only
    Object messages: LIMU METH CL_HRPAY99_POSTING_LOG PUT_PERNR_INFO
    Transport objects from package PCPO to target MRP only
    Object messages: LIMU REPS H99_POST_PAYMENT
    Transport objects from package PCPO to target MRP only
    Please help me how to rectify.
    Thanks n regards
    Bhaskar

    Hello Bhaskar,
    is the transport already approved?
    If not approve it and try it again. (also it is a local one)
    If not check the objects and unlock them manually the following way:
    SE03 => Unlock Objects (Expert Tool)
    But if you approve your transport... the objects should be unlocked.
    Regards
    Stefan

  • ERROR WHILE UPDATING TO INFOCUBE

    Hi All,
    I am using a flat file to load data from datasource into infocubes.The data reaches PSA tables with no errors but after the execution of DTP , the monitors shows up Error Updating to infocube, intitally I thought there could be some problem in the data format of certain fields in the flat file but everything looks to be correct, there are no errors in the transformation rules.
    Here's the ST22 analysis :
    what happened?                                                          
    The current application program detected a situation which really   
    should not occur. Therefore, a termination with a short dump was    
    triggered on purpose by the key word MESSAGE (type X).              
    Termination occurred in the ABAP program "CL_RSAWBN_NAV_TRACE===========CP" -
      in "DUMP".                                                                  
    The main program was "RSAWBN_START ".                                                                               
    In the source code you have the termination point in line 42                 
    of the (Include) program "CL_RSAWBN_NAV_TRACE===========CM004".       
    I have been deleting requests from the infocube , datasources and deleting entries from PSA but always endup getting the "Error while updating to Infocube"
    Have to figure out the solution as the planning team is waiting for me to copy the actual data to the plan cube
    Thanks

    Hi,
    You should have the following format in the flatfile :
    Considering today's date(18 Apr 2008) for example:
    0CALDAY            20080418
    0CALMONTH       200804
    0FISCPER           0042008   
    0FISCPER3         0042008 (I think this can have additional periods as well, not sure though)
    0FISCVARNT       No idea about this.
    Reward with points if helpful.
    Regards
    Hemant Khemani

  • Error while updating a plan

    Hi,
    I have encountered an error while updating a plan. While i update the uplan , the grid gets filled but it throws a message stating
    "Maximum Number of Result Blocks has been reached"
    Maximum number of Result Blocks has been reached.
    [Oracle BAM Enterprise Link error code:  DC -- 0x1, DC -- 0xD4]
    Error while processing the data for the step 'Grid'
    [Oracle BAM Enterprise Link error code:  DC -- 0x1, DC -- 0x83]
    Maximum number of Result Blocks has been reached.
    [Oracle BAM Enterprise Link error code:  DC -- 0x1, DC -- 0xD4]
    Error while processing the data for the step 'Grid'
    [Oracle BAM Enterprise Link error code:  DC -- 0x1, DC -- 0x83]
    Update of Plan "deposittest created 7/19/2007 5:11:50 PM" failed.
    [Oracle BAM Enterprise Link error code:  PlanMgr -- 0x1, PlanMgr -- 0xD5]
    The data updation stops after the row count 49900.
    Please help to resolve this error .
    Thanks in advance.
    Regards,
    Lathika

    Hi,
    in BAM-Administrator you should rraise Parameter "MaxResultBlocks".
    BAM originaly is al licensed Software from Group1 named "Sagent Data Flow".
    This may help searching the web.
    Greetz,
    GOI

  • Error while updating to iOS 6.1.2

    Error while updating software to iOS 6.1.2

    what is the error? if you want help you need to provide some details.

  • Error While updating info in the People Form-Additional Personla Details

    Hi All,
    Iam getting an Error While updating information in the People Form,Additional Personla Details DFF.
    Error Like:
    APP-PER-289974:There has been an error Processing this person,The error encountered is 'ORA-20001:HZ_STNC_SQL_EXCEP:N,PROC.sync_Person,N,ERROR.ORA-25153:Temporary Tablespace is empty ,N,POO,1265890',which occured in procedure  per_htrca_merge_tca_person at step10.
    Please contact your support represntative.
    Thanks -
    Sowmya

    Thanks you,
    By this Note id:395136.1
    Iam unable to find this Set profile 'HZ: Generate Events for DQM Real-Time Synchronization' to No
    with this Note id:278422.1
    We are unable to find this proifle option : HZ: Data Sharing and Security Enabled profile
    we are using applications 11i.
    please help to find this Profile option.
    But with this note id:ID 395136.1
    This is Working.
    Query for HZ: DQM Synchronization Method profile. Set the value to Disable.
    But iam facing proble while uploding data to DFF ,Error--SQL exception occurred during PL/SQL upload.
    Thanks for the Support-
    Sowmya.
    Edited by: user13419037 on Aug 11, 2011 11:53 PM
    Edited by: user13419037 on Aug 12, 2011 12:03 AM
    Edited by: user13419037 on Aug 12, 2011 3:45 AM

  • Error while updating the content in workflow

    Hi,
    I'm getting an error while updating the content in workflow thru the checkout option. i.e. contributor checks in the content - reviewer rejects the content - then contributor checks out and modifies the content as per the reviewer's remarks and while checking in the following error occurs
    Content Server Request Failed
    Unable to check in content item 'HO000128' for workflow. Unable to execute service method 'checkInUpdateRevByID'. (System Error: Runtime error: java.lang.NullPointerException
    at intradoc.server.DocServiceHandler.checkInRevByID(DocServiceHandler.java:248)
    at intradoc.server.DocServiceHandler.checkInUpdateRevByID(DocServiceHandler.java:240)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
    at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:293)
    at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
    at intradoc.server.Service.doCodeEx(Service.java:490)
    at intradoc.server.Service.doCode(Service.java:472)
    at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
    at intradoc.server.Service.doAction(Service.java:452)
    at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
    at intradoc.server.Service.doActions(Service.java:447)
    at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1071)
    at intradoc.server.Service.executeSubServiceCode(Service.java:3497)
    at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:942)
    at intradoc.server.Service.executeServiceEx(Service.java:3492)
    at intradoc.server.Service.executeService(Service.java:3476)
    at intradoc.server.DocServiceHandler.determineWorkflowCheckin(DocServiceHandler.java:3833)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
    at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:293)
    at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
    at intradoc.server.Service.doCodeEx(Service.java:490)
    at intradoc.server.Service.doCode(Service.java:472)
    at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
    at intradoc.server.Service.doAction(Service.java:452)
    at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
    at intradoc.server.Service.doActions(Service.java:447)
    at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1071)
    at intradoc.server.Service.executeSubServiceCode(Service.java:3497)
    at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:942)
    at intradoc.server.Service.executeServiceEx(Service.java:3492)
    at intradoc.server.Service.executeService(Service.java:3476)
    at intradoc.server.Service.doSubService(Service.java:3465)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
    at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:279)
    at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:264)
    at intradoc.server.Service.doCodeEx(Service.java:507)
    at intradoc.server.Service.doCode(Service.java:472)
    at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
    at intradoc.server.Service.doAction(Service.java:452)
    at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
    at intradoc.server.Service.doActions(Service.java:447)
    at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1121)
    at intradoc.server.Service.executeActions(Service.java:433)
    at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:635)
    at intradoc.server.Service.doRequest(Service.java:1707)
    at intradoc.server.ServiceManager.processCommand(ServiceManager.java:359)
    at intradoc.server.IdcServerThread.run(IdcServerThread.java:197))
    Please help to resolve.
    Thanks in advance
    Prasad

    I also get error while updating the content in workflow thru the checkout option as reviewer. i.e. contributor checks in the content - then reviewer either updates the metadata or checks out and modifies the content and while checking in the following error occurs
    Content Server Request Failed
    Unable to update the content item information for 'HO000128'.
    The content ID must be specified.
    Please help to resolve.
    Thanks in advance
    Prasad

  • Error while updating my WP

    Hi, I have got an error while updating my WP on lumia 800? the error code is 80070002. how to resole

    @RoukailaRedouane
    Similar issue raised here with referral to resource below:http://answers.microsoft.com/en-us/winphone/forum/wp7-sync/error-80070002-occurred-when-checking-upd...
    More information can be found here:http://support.microsoft.com/kb/910336/en-us
    Happy to have helped forum with a Support Ratio = 42.5

Maybe you are looking for