Error while upgrading Portal from 10.1.2 to 10.1.4

This is the error message I am getting when I try to upgrade portal from 10.1.2 to 10.1.4 by applying the patch.
NOTIFICATION:1 Framework: Error: Component upgrade failed PORTAL
NOTIFICATION:1 Framework: Error: PORTAL component version is: 10.1.2.0.2 INVALID.
Please let me know if any has has a solution?
==========================================
D:\Software\Oracle\IDM\as_windows_x86_portal_1014\mrua_051020\mrua>mrua.bat -ora
cle_home D:\Software_Installations\OraHome_Infra_01 -oid_host <hostname> -oid_ssl_port 636
Executing mrua.pl
Running on Windows
OracleAS Metadata Repository Upgrade Assistant 10.1.4.0.0
Enter the password for SYS:
Enter the password for cn=orcladmin:
Enter the password for cn=orcladmin:
Upgrading the OracleAS Metadata Repository to release 10.1.4.0.0
Calling upgrade plugin for MRUA
Component has already been upgraded MRUA
Calling upgrade plugin for PORTAL
Error: Component upgrade failed PORTAL
Error: PORTAL component version is: 10.1.2.0.2 INVALID
Calling upgrade plugin for MRC
Component has already been upgraded MRC
FAILURE: Some OracleAS plug-ins report failure during upgrade.
Log file: D:\Software_Installations\OraHome_Infra_01\upgrade\logs\mrua2007-07-1
3_02-07-15PM.log
Finished mrua.pl

That didn't help for me....
I have those things shut down already and you can see below what I'm getting on the re-run:
-bash-3.00$ /app/oracleas/as1012portal/bin/emctl stop iasconsole
Oracle Enterprise Manager 10g Application Server Control Release 10.1.2.0.2 Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://asdev:1811/emd/console/aboutApplication
Stopping Oracle Enterprise Manager 10g Application Server Control ...
Cannot determine Oracle Enterprise Manager 10g Application Server Control process; /app/oracleas/as1012portal/bin/emctl.pid does not exist.
Oracle Enterprise Manager 10g Application Server Control may not be running.
-bash-3.00$ /app/oracleas/as1012portal/opmn/bin/opmnctl stopall
opmnctl: opmn is not running
-bash-3.00$ mrua/mrua.sh -oracle_home /app/oracleas/as1014metadatarepository -oid_host asdev -oid_ssl_port 636
Executing mrua.pl
Running on UNIX
OracleAS Metadata Repository Upgrade Assistant 10.1.4.0.0
Enter the password for SYS:
Enter the password for cn=orcladmin:
Upgrading the OracleAS Metadata Repository to release 10.1.4.0.0
Calling upgrade plugin for MRUA
Component has already been upgraded MRUA
Calling upgrade plugin for PORTAL
Error: Component upgrade failed PORTAL
Error: PORTAL component version is: 10.1.2.0.2 INVALID
Calling upgrade plugin for MRC
Component has already been upgraded MRC
FAILURE: Some OracleAS plug-ins report failure during upgrade.
Log file: /app/oracleas/as1014metadatarepository/upgrade/logs/mrua2007-10-23_00-42-55PM.log
Finished mrua.pl
-bash-3.00$ grep PORTAL /app/oracleas/as1014metadatarepository/upgrade/logs/mrua2007-10-23_00-42-55PM.log
2007/10/23 12:43:06.236 CST NOTIFICATION:1 Framework: Calling upgrade plugin for PORTAL
2007/10/23 12:43:28.203 CST NOTIFICATION:1 Framework: Error: Component upgrade failed PORTAL
2007/10/23 12:43:28.209 CST NOTIFICATION:1 Framework: Error: PORTAL component version is: 10.1.2.0.2 INVALID
There is another oracle instance we have, the one that is hosting the LDAP server, and after the above I also tried doing a stopall there, then bringing up only the ldap server which is required for the upgrade, and then shutting down the iasconsole for that instance too so that only the ldap server remained, then re-running the portal upgrade. It didn't help.
Any ideas?

Similar Messages

ORA-01092 error while upgrading database from 9.2.0.6 to 10.2.0.1

Hi ,
Am getting ORA-01092 error while upgrading database to 10.2.0.1 from 9.2.0.6
I executed the catupgrd.sql successfully and recompiled invaild objects.
After that i tried to startup the database,but am getting the error:
sql>startup
oracle instance started
database mounted
ORA-01092 : Oracle instance terminated. Disconnection forced
I checked alert log file.
I am getting the following errors
Errors in file /u01/......./udump/VIS_ora/7179.trc
ORA-00604: error occurred at recursive SQL level 1
ORA-00607: internal error occurred while making change to a datablock
ORA-00600: internal error code, arguments [4194],[70] ,[39] [ ] []
Error 604 happened during database open . Shutting down database
instance terminated by USER pid =7179
ORA-01092 error Signaled during alter database open
Is there any block corruption? could u please share the solution for these errors?

Hi;
You are hitting ORA-00600: error which mean you may need to work oracle support for your issue.Pelase check below note if its not help i suggest rise sr
Troubleshoot an ORA-600 or ORA-7445 Error Using the Error Lookup Tool [ID 153788.1]
Regard
Helios

Error while upgrading .soln from VS2005 to VS2010 ultimate

I am getting following error while doing mentioned work
Cannot load the project due to a corrupt project file. The following error has occurred during XML parsing: File: E:\nirajcvs\mh\build.nt_m64\build\secwrapper.vcproj Line: 371 Column: 5 Error Message: System error: -2147154677. The file 'E:\nirajcvs\mh\build.nt_m64\build\secwrapper.vcproj'
has failed to load.
Conversion Report - build\secwrapper.vcproj:
Converting project file 'E:\nirajcvs\mh\build.nt_m64\build\secwrapper.vcproj'. Web deployment to the local IIS server is no longer supported. The Web Deployment build tool has been removed from your project settings.
This application has been updated to include settings related to the User Account Control (UAC) feature of Windows Vista. By default, when run on Windows Vista with UAC enabled, this application is marked to run with the same privileges as the process that
launched it. This marking also disables the application from running with virtualization. You can change UAC related settings from the Property Pages of the project.
Failed to upgrade platform 'Pocket PC 2003 (ARMV4)'. Please make sure you have it installed under '%vctargetspath%\platforms\Pocket PC 2003 (ARMV4)' VCWebServiceProxyGeneratorTool is no longer supported. The tool has been removed from your project settings.
Attribute 'Detect64BitPortabilityProblems' of 'VCCLCompilerTool' is not supported in this version and has been removed during conversion.
Attribute 'Detect64BitPortabilityProblems' of 'VCCLCompilerTool' is not supported in this version and has been removed during conversion.
Failed to upgrade 'Debug|Pocket PC 2003 (ARMV4)'. Please make sure you have the corresponding platform installed under '%vctargetspath%\platforms\Pocket PC 2003 (ARMV4)'
The project configuration dimension name/value "(Platform, Win32)" was not found in the project manifest. Project upgrade failed

Hi Niraj,
Please refer to this blog:Visual Studio 2010 C++ Project Upgrade Guide.
http://blogs.msdn.com/b/vcblog/archive/2010/03/02/visual-studio-2010-c-project-upgrade-guide.aspx
"2)
Make sure you have the required platforms installed before doing upgrade
Converting a project on a machine without all the available platforms for the project will result in a conversion error. For example, if you try to convert a project
with Itanium Platform on Visual Studio Professional SKU, which does not support the Itanium platform, you will see a conversion error like the following:
Failed to upgrade 'Debug|<Itanium>'. Please make sure you have the corresponding platform installed under '%vctargetspath%\platforms\Itanium'.
Cannot load the project due to a corrupt project file. The following error has occurred during XML parsing:
File: D:\Sample\ConsoleApp\ConsoleApp.vcproj
Line: 28
Column: 5
Error Message:
System error: -2147154677.
The file 'D:\Sample\ConsoleApp\ConsoleApp.vcproj' has failed to load.
This is by design as the conversion needs to evaluate the properties in the missing platforms to do a successful conversion. You can verify which platforms
are installed on your machine by looking in the following directories: %ProgramFiles%\MSBuild\Microsoft.cpp\V4.0\Platforms (or %ProgramFiles(x86)%\MSBuild\Microsoft.cpp\V4.0\Platforms on x64 machine) for the Platforms installed on the machine. "
Also please try to Open the project/solution files in a text editor and manually remove the references to the platform "Pocket PC 2003 (ARMV4)".
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Getting error while upgrading OIM from 9101 to 9102

I am trying to upgrade OIM from 9101 to 9102 but getting following error.
bash-3.00$ sh ./LoadXLIF.sh jdbc:oracle:thin:@DB_HOST_IP:SID <Database User Name> <Database Password> AUDITCOMPLIANCE
/opt/oracle/oim/jdk_1.5.0_06/bin/java -cp /:/lib/xlUtils.jar com.thortech.xl.util.LoadXLIF Oracle oracle.jdbc.driver.OracleDriver jdbc:oracle:thin:@DB_HOST_IP:SID <Database User Name> <Database Password> xliff/XLIFsequence.properties xliff AUDITCOMPLIANCE
Exception in thread "main" java.lang.NoClassDefFoundError: com/thortech/xl/util/LoadXLIF
I confirmed that /xellerate/lib/xlUtils.jar has com/thortech/xl/util/LoadXLIF.class
Thanks.
Vinay

Hi, please update the reason and how you were able to resolve the issue. So that it will help other users too.

Error while upgrading BPEL from 10g BPEL to 11g

Hi,
Trying to upgrade 10.1.3 BPEL to 11.1.1.4 using command line tool and getting the following error
INFO: No decision services in directory D:\test\Invoice\InInvoiceCustomMap\bpel
SEVERE: Upgrade failed. Check the logs for any exceptions. Ensure that the WSDL URLs specified in the project are reachable and a valid 10.1.3.x project is used for upgrade. Before re-attempting upgrade, restore the original project code source from the backup directory.
java.io.IOException: Could not find prefix for namespace: http://xmlns.oracle.com/pcbpel/wsdl/jca/
     at oracle.viewgen.binding.JCABindingPlugin.create(JCABindingPlugin.java:88)
     at oracle.viewgen.binding.BindingUtil.createBinding(BindingUtil.java:216)
     at oracle.viewgen.composite.CompositeUtil.setupBinding(CompositeUtil.java:730)
     at oracle.viewgen.composite.CompositeUtil.setupCompositeServices(CompositeUtil.java:444)
     at oracle.viewgen.composite.CompositeUtil.createComposite(CompositeUtil.java:315)
     at oracle.viewgen.ViewGenerator.main(ViewGenerator.java:316)
Caused by: javax.wsdl.WSDLException: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Could not find prefix for namespace: http://xmlns.oracle.com/pcbpel/wsdl/jca/
     at oracle.j2ee.ws.wsdl.xml.WSDLWriterImpl.writeWSDL(WSDLWriterImpl.java:126)
     at oracle.integration.platform.blocks.adapter.fw.metadata.migration.JcaMigrationResult.getSerializedDefinition(JcaMigrationResult.java:190)
     at oracle.viewgen.binding.JCABindingPlugin.create(JCABindingPlugin.java:62)
     ... 5 more
Caused by: java.io.IOException: Could not find prefix for namespace: http://xmlns.oracle.com/pcbpel/wsdl/jca/
     at oracle.j2ee.ws.wsdl.xml.WSDLWriterImpl.writeAttValFromQName(WSDLWriterImpl.java:745)
     at oracle.j2ee.ws.wsdl.xml.WSDLWriterImpl.writeOperation(WSDLWriterImpl.java:612)
     at oracle.j2ee.ws.wsdl.xml.WSDLWriterImpl.writePortType(WSDLWriterImpl.java:463)
     at oracle.j2ee.ws.wsdl.xml.WSDLWriterImpl.writeDefinition(WSDLWriterImpl.java:221)
     at oracle.j2ee.ws.wsdl.xml.WSDLWriterImpl.writeWSDL(WSDLWriterImpl.java:124)
     ... 7 more
Not sure where it went wrong. Checked all the namespaces and think they everything is fine.
Any clues?
Thanks
Sree

If you are using Spring then the error (No property editor found for the bean "java.util.Date".) and the likes, could be due to that you have not injected your property editors into your controller.
The error The required attribute "plugin" is missing. Is probably due to the fact that you have defined the plugin property to be required in your TLD.

Error while updating data from DataStore object

Hi,
Currently we are upgrading BW3.5 to BI7.0 for technical only,
we found and errors during process chain run in further processing step. This step is basically a delta loading from DSO to Cube.
The error message are:
Error while updating data from DataStore object 0GLS_INV
Message no. RSMPC146
Job terminated in source system --> Request set to red
Message no. RSM078
That's all no further errors message can be explained clearly here from system.
I have applied SAP note 1152453 and reactivate the datasource, infosource, and data target.
Still no help here!?
Please advise if you encountered these errors before.
Thanks in advance.
Regards,
David
Edited by: David Tai Wai Tan on Oct 31, 2008 2:46 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:50 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:52 PM

Hi Vijay,
I got this error:
Runtime Errors         MESSAGE_TYPE_X
Date and Time          04.11.2008 11:43:08
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Short text of error message:
No start information on process LOADING
Long text of error message:
Diagnosis
      For process LOADING, variant ZPAK_0SKIJ58741F4ASCSIYNV1PI9U, the
      end should be logged for instance REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX
      under the log ID D4FIDCBHXPLZMP5T71JZQVUWX. However, no start has
      been logged for this process.
System Response
      No log has been written. The process (and consequently the chain)
      has been terminated.
Procedure
      If possible, restart the process.
Procedure for System Administration
Technical information about the message:
Message class....... "RSPC"
Number.............. 004
Variable 1.......... "D4FIDCBHXPLZMP5T71JZQVUWX"
Variable 2.......... "LOADING"
Variable 3.......... "ZPAK_0SKIJ58741F4ASCSIYNV1PI9U"
Variable 4.......... "REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX"
Any idea?

Error while upgrade 12.1.1 to 12.13

Hi,
I am getting blow error while upgrade 12.1.1 to 12.1.3 (patch 9239090) in linux 32 bit (OEL5),also i started patch from the beginning onwards but still i am getting same errror...
Please some one help me to move forward ....
Now i need to fix this issue then only i can move forward ....
Assigned: file jlbrspedpreupg1.sql on worker 3 for product jl username JL.
Completed: file MSCINTEG.sql on worker 8 for product msc username MSC.
FAILED: file jlbrspedpreupg1.sql on worker 3 for product jl username JL.
Deferred: file jlbrspedpreupg1.sql on worker 3 for product jl username JL. (Deferment number 2 for this job)
Assigned: file jlbrspedpreupg1.sql on worker 3 for product jl username JL.
FAILED: file jlbrspedpreupg1.sql on worker 3 for product jl username JL.
Completed: file EGOSEFD2.sql on worker 2 for product ego username EGO.
Completed: file RRSCRTYP.sql on worker 1 for product rrs username RRS.
ATTENTION: All workers either have failed or are waiting:
FAILED: file jlbrspedpreupg1.sql on worker 3.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.
Thanks & Regd..
Suresh

Hi Hussein,
I have apply one more time from the beginning onwards... now i am getting same error in worker 1, the worker1 log out put given blow...
Time when worker started job: Mon Feb 28 2011 13:55:14
Start time for file is: Mon Feb 28 2011 13:55:14
sqlplus -s APPS/***** @/d01/VIS/apps/apps_st/appl/jl/12.0.0/patch/115/sql/jlbrspedpreupg1.sql &un_apps &pw_apps
Connected.
DECLARE
ERROR at line 1:
ORA-04063: package body "APPS.FND_LOG" has errors
ORA-06508: PL/SQL: could not find program unit being called: "APPS.FND_LOG"
ORA-06512: at line 402
ORA-04063: package body "APPS.FND_LOG" has errors
ORA-06508: PL/SQL: could not find program unit being called: "APPS.FND_LOG"
Thanks
Suresh

Error while upgrading the NW04 engine

Hi All,
I got following error while upgrading the NW04 engine. "error while reading sdmrepository.sdc file. return code 16."
I tried from stand alone. same issue. It would be great if somebody gives solution quickly.
Thanks
Vincent

Hi ,
even if you start the mode in either standalone or integrated your SDM won't start completely and shows the above error.
check for sdmrepository.sdc file under <Drive>:\usr\sap\<SAP_ID>\JC<Instance_ID>\SDM\program\config\
sdc file might got corrupted or it's size would have got reduced. even if you run sdm in standalone or integrated,
you will get the same error.
Solution is to compare with the backup file that sapinst created everytime while upgarding the engine in the same folder and
replace the latest with the current.then your problem is solved.
hope that helps.reward points if it helps

Error while creating subsite from site template

Hi,
I am getting below error while creating subsite from existing site template .
Sachin Bhosale

There must be a duplicate Email field created in any list/library. The cause can be identified by renaming the site template to sitename.cab > extact the cab file > open the manifest file search for email and see where it is associated. Refer
to the following blog post for more information
http://sharepointserved.blogspot.com/2012/11/a-duplicate-name-was-found.html
http://sharepoint.stackexchange.com/questions/11944/error-when-creating-a-site-from-custom-template-a-duplicate-field-name-name
Cheers,

Error while updating data from PSA to ODS

Hi Sap Gurus,
I am facing the error while updating data from PSA to ODS in BI 7.0
The exact error message is:
The argument 'TBD' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
Please suggest how to proceed on this issue.
Points will be awarded.

Hi ,
Try to simulate the process.That can give you exact error location.
It seems like while updating few records may be no in the format of the field in which it is updated.
Regards
Rahul Bindroo

Error while selecting date from external table

Hello all,
I am getting the follwing error while selecting data from external table. Any idea why?
SQL> CREATE TABLE SE2_EXT (SE_REF_NO VARCHAR2(255),
2        SE_CUST_ID NUMBER(38),
3        SE_TRAN_AMT_LCY FLOAT(126),
4        SE_REVERSAL_MARKER VARCHAR2(255))
5 ORGANIZATION EXTERNAL (
6    TYPE ORACLE_LOADER
7    DEFAULT DIRECTORY ext_tables
8    ACCESS PARAMETERS (
9      RECORDS DELIMITED BY NEWLINE
10      FIELDS TERMINATED BY ','
11      MISSING FIELD VALUES ARE NULL
12      (
13        country_code      CHAR(5),
14        country_name      CHAR(50),
15        country_language CHAR(50)
16      )
17    )
18    LOCATION ('SE2.csv')
19 )
20 PARALLEL 5
21 REJECT LIMIT UNLIMITED;
Table created.
SQL> select * from se2_ext;
SQL> select count(*) from se2_ext;
select count(*) from se2_ext
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04043: table column not found in external source: SE_REF_NO
ORA-06512: at "SYS.ORACLE_LOADER", line 19

It would appear that you external table definition and the external data file data do not match up. Post a few input records so someone can duplicate the problem and determine the fix.
HTH -- Mark D Powell --

DB Connect Load - "Unknow error while uploading data from the DB Table"

Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
Abhijit

Hi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait

Failed to commit objects to server. Error while publishing reports from BW

Hi,
I am getting below error while publishing reports from BW to BO.
"0000000001 Unable to commit the changes to Enterprise. Reason: Failed to commit objects to server : #Duplicate object name in the same folder."
Anyone having any solution for this. Thanks in advance.

Hi Amit
It would be great if you could add a little info about how you solved this issue. Others might run into similar situations - I just did:-(
Thank you:-)

Error while creating DTP from DS to Infoobject

Dear All,
I am getting one error while creating DTP from Datasource to Info object can any one give some suggetion regarding this issue.
Issue:Enter a valid value
Msg No:00002
Procedure: Display the allowed values withF4 and correct your entry,
Regards,
Satya

Hi Satya,
Trying logging off the system and log in again and try to activate Data source Infoobject and transformation again and try creating DTP by selecting Selecting the source system by pressing F4. I hope it should work.
I don't find any specific problem or any patch problem with the error you are getting.
Hope it helps !
Regards,
Rose.

Password Violation error while creating users from Admin interface

Guys,
The Sun Identity Manager system throws policy violation error while creating users from Sun Identity Manager Admin interface.
Current System:
1. I have configured TAM Pass-Thru authentication for End User Login Application.
2. I have an admin user 'testsjimadmin1' who has admin capabilities. testsjimadmin1 user has default SJIM password policy.
3. I have custom password policies configured for different orgainizatoions
Problem:
1. The Sun Identity Manager throws a password policy violation error when 'testsjimadmin1' tries to create an user with valid or invalid password from Sun Identity Manager Admin interface.
2. If TAM Pass-thru authentication is removed for 'End User Login Application' and Sun Identity Manager default authentication is configured for 'End User Login Application' then testsjimadmin1 was able to create user successfully without any errors.
Please let me know if any configurations are required to be made on Sun Identity Manager for TAM Pass-Thru authentication so that admin users can create users successfully from admin interface.
Appreciate your help!!!
Thanks
Vijay

Guys,
The Sun Identity Manager system throws policy violation error while creating users from Sun Identity Manager Admin interface.
Current System:
1. I have configured TAM Pass-Thru authentication for End User Login Application.
2. I have an admin user 'testsjimadmin1' who has admin capabilities. testsjimadmin1 user has default SJIM password policy.
3. I have custom password policies configured for different orgainizatoions
Problem:
1. The Sun Identity Manager throws a password policy violation error when 'testsjimadmin1' tries to create an user with valid or invalid password from Sun Identity Manager Admin interface.
2. If TAM Pass-thru authentication is removed for 'End User Login Application' and Sun Identity Manager default authentication is configured for 'End User Login Application' then testsjimadmin1 was able to create user successfully without any errors.
Please let me know if any configurations are required to be made on Sun Identity Manager for TAM Pass-Thru authentication so that admin users can create users successfully from admin interface.
Appreciate your help!!!
Thanks
Vijay

Error while upgrading Portal from 10.1.2 to 10.1.4

Similar Messages

Maybe you are looking for