Error while upgrading SAP R/3 Enterprise 4.7 to SAP ECC 5.0

Dear SAP,
We are on the process of upgrading SAP R/3 Enterprise 4.7 with Ext:110 to SAP ECC 5.0.But during the VERSCHK_INI phase an error is been thrown showing that
"The start release configuration :
SAP_ABA :620
SAP_APPL :470
SAP_BASIS :620
SAP_HR:470.....is not supported "
At this stage we decided to continue with this by ignoring the VERSCHK_INI phase,but it gave us a warning that to continue with the next phase(TOOLVERSIOn_INI phase) we require a password.
we searched in several documents even in the documents along with the cd but was not able to find a password for this or a solution for the error in phase VERSCHK_INI.
I request team SAP to help us in this regard.Expecting your reply ASAP.
Thanks and Regards
Anantha Raman E.

Were you able to find a resolution to this problem. We are also having a similar problem in our prepare phase and cannot find anything to help us as yet.
Thanks,
Barry Keating

Similar Messages

Error while upgrading the NW04 engine

Hi All,
I got following error while upgrading the NW04 engine. "error while reading sdmrepository.sdc file. return code 16."
I tried from stand alone. same issue. It would be great if somebody gives solution quickly.
Thanks
Vincent

Hi ,
even if you start the mode in either standalone or integrated your SDM won't start completely and shows the above error.
check for sdmrepository.sdc file under <Drive>:\usr\sap\<SAP_ID>\JC<Instance_ID>\SDM\program\config\
sdc file might got corrupted or it's size would have got reduced. even if you run sdm in standalone or integrated,
you will get the same error.
Solution is to compare with the backup file that sapinst created everytime while upgarding the engine in the same folder and
replace the latest with the current.then your problem is solved.
hope that helps.reward points if it helps

Error while creating and opening a ERP sales order in SAP CRM

Hi,
I am getting an error while creating or opening a ERP sales order from SAP CRM.
"Creation of the ERP Transaction failed" this is the error i'm getting while creating. when i try to open an existing sales order I'm getting a dump.
Attached the dump screen shot. From the dump analyasis it seems the transactions are not loaded through LORD framework.
The RFC connection seems to fine as i have tested accessing an ECC RFC FM through a sample program and its successful..
please help..
Thanks
Krishna

Hello Krishna,
Did you get a solution to this? I have the same dump message.
As a matter of fact, we already use ERP Sales Order and it works fine. But I have recently configured a new sales order document type, and the dump occurs only for this new Z order type.
Thanks a lot,
Luis.

Error while upgrading to 10.1.3.5

I am getting error while upgrading to 10.1.3.5.
getting error while configuring OWSM. here is the error log.
*09/09/28 14:28:53 Notification ==>Application Deployer for coreman STARTS.*
*09/09/28 14:28:53 Notification ==>Undeploy previous deployment*
*09/09/28 14:28:58 Notification ==>Initialize /space/oracle11bpel/j2ee/oc4j_soa11wf/applications/coreman.ear begins...*
*09/09/28 14:28:58 Notification ==>Initialize /space/oracle11bpel/j2ee/oc4j_soa11wf/applications/coreman.ear ends...*
*09/09/28 14:28:58 Notification ==>Starting application : coreman*
*09/09/28 14:28:58 Notification ==>Initializing ClassLoader(s)*
*09/09/28 14:28:58 Notification ==>Initializing EJB container*
*09/09/28 14:28:58 Notification ==>Loading connector(s)*
*09/09/28 14:28:58 Notification ==>Starting up resource adapters*
*09/09/28 14:28:58 Notification ==>Initializing EJB sessions*
*09/09/28 14:28:58 Notification ==>Committing ClassLoader(s)*
*09/09/28 14:28:58 Notification ==>Initialize coreman begins...*
*09/09/28 14:28:58 Notification ==>Initialize coreman ends...*
*09/09/28 14:28:58 Notification ==>Started application : coreman*
*09/09/28 14:28:58 Notification ==>Binding web application(s) to site default-web-site begins...*
*09/09/28 14:28:58 Notification ==>Binding web application(s) to site default-web-site ends...*
*09/09/28 14:28:58 Notification ==>Deleting: /space/oracle11bpel/j2ee/oc4j_soa11wf/applications/coreman.ear*
*09/09/28 14:28:58 Notification ==>Deleting: /space/oracle11bpel/j2ee/oc4j_soa11wf/applications/coreman/coreman.war*
*09/09/28 14:28:58 Notification ==>Begin adding application: coreman to container runtime for: oc4j-develop-12420-default*
*09/09/28 14:28:58 Notification ==>Operation failed with error:*
Unable to find/read file META-INF/ra.xml in /space/oracle11bpel/j2ee/oc4j_soa11wf/connectors/coreman/coreman archive (IO Error: error in opening zip file)
Deploy error: Deploy error: Operation failed with error:
Unable to find/read file META-INF/ra.xml in /space/oracle11bpel/j2ee/oc4j_soa11wf/connectors/coreman/coreman archive (IO Error: error in opening zip file)
I checked the Connectors directory for coreman but its not available. I even checked with my previous successful installations for this directory, its not even there too.
The only difference i found in the error logs and the successful logs is ..
*09/09/28 14:28:58 Notification ==>Begin adding application: coreman to container runtime for: oc4j-develop-12420-default*
I did not see this line in the success log.
Here is my environment information.
I have an OPMN clustered environment. The second node in the cluster was down while this upgradation.
There are two groups -- default_group and abcbpel_group
abcbpel_group contains the soa instance. while default_group contains home instance.

Hi.
I have the same problem too.
Had You found the solution?

Error while upgrade 12.1.1 to 12.13

Hi,
I am getting blow error while upgrade 12.1.1 to 12.1.3 (patch 9239090) in linux 32 bit (OEL5),also i started patch from the beginning onwards but still i am getting same errror...
Please some one help me to move forward ....
Now i need to fix this issue then only i can move forward ....
Assigned: file jlbrspedpreupg1.sql on worker 3 for product jl username JL.
Completed: file MSCINTEG.sql on worker 8 for product msc username MSC.
FAILED: file jlbrspedpreupg1.sql on worker 3 for product jl username JL.
Deferred: file jlbrspedpreupg1.sql on worker 3 for product jl username JL. (Deferment number 2 for this job)
Assigned: file jlbrspedpreupg1.sql on worker 3 for product jl username JL.
FAILED: file jlbrspedpreupg1.sql on worker 3 for product jl username JL.
Completed: file EGOSEFD2.sql on worker 2 for product ego username EGO.
Completed: file RRSCRTYP.sql on worker 1 for product rrs username RRS.
ATTENTION: All workers either have failed or are waiting:
FAILED: file jlbrspedpreupg1.sql on worker 3.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.
Thanks & Regd..
Suresh

Hi Hussein,
I have apply one more time from the beginning onwards... now i am getting same error in worker 1, the worker1 log out put given blow...
Time when worker started job: Mon Feb 28 2011 13:55:14
Start time for file is: Mon Feb 28 2011 13:55:14
sqlplus -s APPS/***** @/d01/VIS/apps/apps_st/appl/jl/12.0.0/patch/115/sql/jlbrspedpreupg1.sql &un_apps &pw_apps
Connected.
DECLARE
ERROR at line 1:
ORA-04063: package body "APPS.FND_LOG" has errors
ORA-06508: PL/SQL: could not find program unit being called: "APPS.FND_LOG"
ORA-06512: at line 402
ORA-04063: package body "APPS.FND_LOG" has errors
ORA-06508: PL/SQL: could not find program unit being called: "APPS.FND_LOG"
Thanks
Suresh

Error while Upgrading to 9.2.0.8

Hi Experts,
I'm trying to upgrade my current version of oracle "9.2.0.1" which is running on a Solaris box, to "9.2.0.8" not able to succeed.
Can any body help me to solve my problem????
Thnx & Regards
Sunil

Yingkuan,
You need to apply Patchset 4547809 firstI'm not sure to follow you, the patchset 4547809 is
Oracle 9.2.0.8 which Sunil wants to apply on his/her
database, the thread's title is "Error while
Upgrading to 9.2.0.8", isn't it ?
If you goto 9.2.0.8 patchset download page, you will see all three patchset listed, there's a good chance Sunil mistakenly download the catch-up patchset instead of the full set. My purpose is to clarify the situation.
At least he didn't mention Patchset Number.
PS :
Patchset 4547809 first, the 415M onePatchset 4547809 is 415M for 64-bits, which seems not
be used here (the Banner doesn't contains "64bit
Production"), it's 352Mb for 32-bits. But I maybe
missed something else.
Message was edited by:
N. GasparottoHe didn't mention 64bit but that he didn't mention 32-bit either. Not many Solaris is still under 32bit per se.
Again my purpose to have him post Patchset Number used, then we will have clear picture and rule out some assumption.

ORA-01092 error while upgrading database from 9.2.0.6 to 10.2.0.1

Hi ,
Am getting ORA-01092 error while upgrading database to 10.2.0.1 from 9.2.0.6
I executed the catupgrd.sql successfully and recompiled invaild objects.
After that i tried to startup the database,but am getting the error:
sql>startup
oracle instance started
database mounted
ORA-01092 : Oracle instance terminated. Disconnection forced
I checked alert log file.
I am getting the following errors
Errors in file /u01/......./udump/VIS_ora/7179.trc
ORA-00604: error occurred at recursive SQL level 1
ORA-00607: internal error occurred while making change to a datablock
ORA-00600: internal error code, arguments [4194],[70] ,[39] [ ] []
Error 604 happened during database open . Shutting down database
instance terminated by USER pid =7179
ORA-01092 error Signaled during alter database open
Is there any block corruption? could u please share the solution for these errors?

Hi;
You are hitting ORA-00600: error which mean you may need to work oracle support for your issue.Pelase check below note if its not help i suggest rise sr
Troubleshoot an ORA-600 or ORA-7445 Error Using the Error Lookup Tool [ID 153788.1]
Regard
Helios

Critical Error while upgrading workbook

Dear All,
I receive a critical error while I open a workbook in Bex 7.0 analyzer.
After I see the dialog - "Workbook open for upgrade", I received this error.
It says check the trace and I don't have a clue how to check the trace.
Can somebody help me?
Thanks,
Praveen.

Hi Arun,
Thanks for your reply.
Yes my GUI is latest with all 710 latest patches for:
1. SAP GUI Patch 13
2. BW 7.0 Add-on Patch 901
3. BW 3.5 Add-on Patch 6
Thanks and regards,
Pratik

Error while upgrading EP 6.0 to EP 7.0 SP15

Hi All,
While upgrading SAP Portal server EP 6.0 to EP 7.0 SP15 on AIX, i got the following error... Pl suggest.
*Thr 1] **LOG Q0I=> NiPConnect: connect (79: Connection refused)
[nixxi.cpp 2513]
*[Thr 1] *** ERROR => NiPConnect: SiConnect failed for hdl 0 / sock 6*
(SI_ECONN_REFUSE/79; I4; ST; 112.47.0.10:3601) [nixxi.cpp 2513]
*[Thr 1] *** ERROR => MsIAttachEx: NiBufConnect to myportal/3601 failed*
(rc=NIECONN_REFUSED) [msxxi_mt.c 652]
*[Thr 1] *** ERROR => Can't attach to message server (myportal/3601)*
[rc = -100]-> terminate [jcntrms_mt.c 374]
[Thr 1] JControlCloseProgram: started (exitcode = -100)
*[Thr 1] *** ERROR => MsIModState: not_attached [msxxi_mt.c 3838]*
*[Thr 1] *** ERROR => Can't modify message server state (state = 7, rc*
= -3) [jcntrms_mt.c 841]
[Thr 1] JControlCloseProgram: good bye... (exitcode = -100)
Thanks
Pradeep

Its a network issue

Error while upgrading NW04s SP 10 to SP 11

Hi Experts,
I am trying to upgrade server NW04s SP 10 to SA 11. while deploying some SCA's I am getting following error. I also tried forced deployment. But not working.
Anyone has faced the same?? Please help.
==========================================================================
Deployment started Tue Feb 20 13:50:45 GMT+05:30 2007
===========================================================================
Starting Deployment of com.sap.pcd.dbschema
Finished successfully: development component 'com.sap.pcd.dbschema'/'sap.com'/'SAP AG'/'7.0011.20070128005913.0000'/'6', grouped by software component 'EPBC'/'sap.com'/'SAP AG'/'1000.7.00.11.0.20070201073900''/'6'
Deployment of com.sap.pcd.dbschema finished successfully (Duration 16218 ms)
Starting Deployment of com.sapportals.prt.bridge
Finished successfully: development component 'com.sapportals.prt.bridge'/'sap.com'/'SAP AG'/'7.0010.20061109164817.0000'/'7', grouped by software component 'EPBC'/'sap.com'/'SAP AG'/'1000.7.00.11.0.20070201073900''/'6'
Deployment of com.sapportals.prt.bridge finished successfully (Duration 12219 ms)
Starting Deployment of com.sapportals.prt.portalruntime
Finished successfully: development component 'com.sapportals.prt.portalruntime'/'sap.com'/'SAP AG'/'7.0011.20070128005913.0000'/'6', grouped by software component 'EPBC'/'sap.com'/'SAP AG'/'1000.7.00.11.0.20070201073900''/'6'
Deployment of com.sapportals.prt.portalruntime finished successfully (Duration 12234 ms)
Starting Deployment of irj
Aborted: development component 'irj'/'sap.com'/'SAP AG'/'7.0011.20070128005913.0000'/'6', grouped by :
CPO data could not be get.
com.sap.sdm.apiint.serverext.servertype.deployment.DeploymentActionException: Error: Caught the following error or exception: "com.sap.sdm.apiint.serverext.servertype.deployment.DeploymentActionException"
Additional error message is:
Caught exception from deploy service of SAP J2EE Engine. Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [***********] with user name: [Administrator]                     Check your login information.                     Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances:
*********:55004 Reason: Cannot open connection on host: **.*.*.** and port: 55004]
     at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:455)
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:662)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:243)
     at javax.naming.InitialContext.init(InitialContext.java:219)
     at javax.naming.InitialContext.<init>(InitialContext.java:195)
     at com.sap.engine.deploy.manager.DeployManagerImpl.checkCredentials(DeployManagerImpl.java:2983)
     at com.sap.sdm.serverext.servertype.inqmy.extern.DeployManagerAuthMethodInvoker.invokeCheckCredentialsInternal(DeployManagerAuthMethodInvoker.java:51)
     at com.sap.sdm.serverext.servertype.inqmy.extern.ExternalMethodInvoker.invokeCheckCredentials(ExternalMethodInvoker.java:45)
     at com.sap.sdm.serverext.servertype.inqmy.extern.ExternalMethodInvoker.invokeCheckCredentials(ExternalMethodInvoker.java:32)
     at com.sap.sdm.serverext.servertype.inqmy.extern.EngineOnlineDeployerImpl.checkLoginCredentials(EngineOnlineDeployerImpl.java:173)
     at com.sap.sdm.serverext.servertype.inqmy.extern.EngineJ2EE620OnlineDeployerImpl.getOldDeploymentConfigInternal(EngineJ2EE620OnlineDeployerImpl.java:930)
     at com.sap.sdm.serverext.servertype.inqmy.extern.EngineJ2EE620OnlineDeployerImpl.getOldDeploymentConfiguration(EngineJ2EE620OnlineDeployerImpl.java:118)
     at com.sap.sdm.serverext.servertype.inqmy.EngineJ2EE620OnlineProcessor.getOldDeploymentConfiguration(EngineJ2EE620OnlineProcessor.java:87)
     at com.sap.sdm.serverext.servertype.inqmy.EngineJ2EE620OnlineProcessor.createCpo(EngineJ2EE620OnlineProcessor.java:75)
     at com.sap.sdm.serverext.servertype.inqmy.EngineJ2EE620OnlineProcessor.getCpo(EngineJ2EE620OnlineProcessor.java:47)
     at com.sap.sdm.serverext.servertype.inqmy.extern.EngineJ2EE620OnlineDeployerImpl.performDeployment(EngineJ2EE620OnlineDeployerImpl.java:180)
     at com.sap.sdm.serverext.servertype.inqmy.extern.EngineDeployerImpl.deploy(EngineDeployerImpl.java:96)
     at com.sap.sdm.serverext.servertype.inqmy.EngineProcessor.executeAction(EngineProcessor.java:224)
     at com.sap.sdm.app.proc.deployment.impl.PhysicalDeploymentActionExecutor.execute(PhysicalDeploymentActionExecutor.java:60)
     at com.sap.sdm.app.proc.deployment.impl.DeploymentActionImpl.execute(DeploymentActionImpl.java:186)
     at com.sap.sdm.app.proc.deployment.controllers.internal.impl.DeploymentExecutorImpl.execute(DeploymentExecutorImpl.java:48)
     at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.executeAction(ExecuteDeploymentHandler.java:83)
     at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.handleEvent(ExecuteDeploymentHandler.java:60)
     at com.sap.sdm.app.proc.deployment.states.StateBeforeNextDeployment.processEvent(StateBeforeNextDeployment.java:127)
     at com.sap.sdm.app.proc.deployment.states.InstContext.processEventServerSide(InstContext.java:73)
     at com.sap.sdm.app.proc.deployment.states.InstContext.processEvent(InstContext.java:59)
     at com.sap.sdm.app.view.controllers.DeployEventProcessor.processEvent(DeployEventProcessor.java:11)
     at com.sap.sdm.client_server.deployserver.DeployCmdProcessor.processEvent(DeployCmdProcessor.java:264)
     at com.sap.sdm.client_server.deployserver.DeployCmdProcessor.process(DeployCmdProcessor.java:108)
     at com.sap.sdm.gui.server.GuiAdminRoleCmdProcessor.process(GuiAdminRoleCmdProcessor.java:72)
     at com.sap.sdm.is.cs.session.server.SessionCmdProcessor.process(SessionCmdProcessor.java:67)
     at com.sap.sdm.is.cs.cmd.server.CmdServer.execCommand(CmdServer.java:76)
     at com.sap.sdm.client_server.launch.ServerLauncher$ConnectionHandlerImpl.handle(ServerLauncher.java:286)
     at com.sap.sdm.is.cs.ncserver.NetCommServer.serve(NetCommServer.java:43)
     at com.sap.sdm.is.cs.ncwrapper.impl.ServiceWrapper.serve(ServiceWrapper.java:39)
     at com.sap.bc.cts.tp.net.Worker.run(Worker.java:50)
     at java.lang.Thread.run(Thread.java:534)
Caused by: com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances:
**********:55004 Reason: Cannot open connection on host: **.*..* and port: 55004
     at com.sap.engine.interfaces.cross.Destination.getNextAvailableBroker(Destination.java:53)
     at com.sap.engine.interfaces.cross.Destination.getRemoteBroker(Destination.java:33)
     at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:340)
     ... 36 more
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineJ2EE620OnlineDeployerImpl.checkLoginCredentials.DMEXC)
Additional error message is:
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [********] with user name: [Administrator]                     Check your login information.                     Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances:
************:55004 Reason: Cannot open connection on host: **.*..* and port: 55004]
     at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:455)
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:662)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:243)
     at javax.naming.InitialContext.init(InitialContext.java:219)
     at javax.naming.InitialContext.<init>(InitialContext.java:195)
     at com.sap.engine.deploy.manager.DeployManagerImpl.checkCredentials(DeployManagerImpl.java:2983)
     at com.sap.sdm.serverext.servertype.inqmy.extern.DeployManagerAuthMethodInvoker.invokeCheckCredentialsInternal(DeployManagerAuthMethodInvoker.java:51)
     at com.sap.sdm.serverext.servertype.inqmy.extern.ExternalMethodInvoker.invokeCheckCredentials(ExternalMethodInvoker.java:45)
     at com.sap.sdm.serverext.servertype.inqmy.extern.ExternalMethodInvoker.invokeCheckCredentials(ExternalMethodInvoker.java:32)
     at com.sap.sdm.serverext.servertype.inqmy.extern.EngineOnlineDeployerImpl.checkLoginCredentials(EngineOnlineDeployerImpl.java:173)
     at com.sap.sdm.serverext.servertype.inqmy.extern.EngineJ2EE620OnlineDeployerImpl.getOldDeploymentConfigInternal(EngineJ2EE620OnlineDeployerImpl.java:930)
     at com.sap.sdm.serverext.servertype.inqmy.extern.EngineJ2EE620OnlineDeployerImpl.getOldDeploymentConfiguration(EngineJ2EE620OnlineDeployerImpl.java:118)
     at com.sap.sdm.serverext.servertype.inqmy.EngineJ2EE620OnlineProcessor.getOldDeploymentConfiguration(EngineJ2EE620OnlineProcessor.java:87)
     at com.sap.sdm.serverext.servertype.inqmy.EngineJ2EE620OnlineProcessor.createCpo(EngineJ2EE620OnlineProcessor.java:75)
     at com.sap.sdm.serverext.servertype.inqmy.EngineJ2EE620OnlineProcessor.getCpo(EngineJ2EE620OnlineProcessor.java:47)
     at com.sap.sdm.serverext.servertype.inqmy.extern.EngineJ2EE620OnlineDeployerImpl.performDeployment(EngineJ2EE620OnlineDeployerImpl.java:180)
     at com.sap.sdm.serverext.servertype.inqmy.extern.EngineDeployerImpl.deploy(EngineDeployerImpl.java:96)
     at com.sap.sdm.serverext.servertype.inqmy.EngineProcessor.executeAction(EngineProcessor.java:224)
     at com.sap.sdm.app.proc.deployment.impl.PhysicalDeploymentActionExecutor.execute(PhysicalDeploymentActionExecutor.java:60)
     at com.sap.sdm.app.proc.deployment.impl.DeploymentActionImpl.execute(DeploymentActionImpl.java:186)
     at com.sap.sdm.app.proc.deployment.controllers.internal.impl.DeploymentExecutorImpl.execute(DeploymentExecutorImpl.java:48)
     at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.executeAction(ExecuteDeploymentHandler.java:83)
     at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.handleEvent(ExecuteDeploymentHandler.java:60)
     at com.sap.sdm.app.proc.deployment.states.StateBeforeNextDeployment.processEvent(StateBeforeNextDeployment.java:127)
     at com.sap.sdm.app.proc.deployment.states.InstContext.processEventServerSide(InstContext.java:73)
     at com.sap.sdm.app.proc.deployment.states.InstContext.processEvent(InstContext.java:59)
     at com.sap.sdm.app.view.controllers.DeployEventProcessor.processEvent(DeployEventProcessor.java:11)
     at com.sap.sdm.client_server.deployserver.DeployCmdProcessor.processEvent(DeployCmdProcessor.java:264)
     at com.sap.sdm.client_server.deployserver.DeployCmdProcessor.process(DeployCmdProcessor.java:108)
     at com.sap.sdm.gui.server.GuiAdminRoleCmdProcessor.process(GuiAdminRoleCmdProcessor.java:72)
     at com.sap.sdm.is.cs.session.server.SessionCmdProcessor.process(SessionCmdProcessor.java:67)
     at com.sap.sdm.is.cs.cmd.server.CmdServer.execCommand(CmdServer.java:76)
     at com.sap.sdm.client_server.launch.ServerLauncher$ConnectionHandlerImpl.handle(ServerLauncher.java:286)
     at com.sap.sdm.is.cs.ncserver.NetCommServer.serve(NetCommServer.java:43)
     at com.sap.sdm.is.cs.ncwrapper.impl.ServiceWrapper.serve(ServiceWrapper.java:39)
     at com.sap.bc.cts.tp.net.Worker.run(Worker.java:50)
     at java.lang.Thread.run(Thread.java:534)
Caused by: com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances:
*********:55004 Reason: Cannot open connection on host: **.*..* and port: 55004
     at com.sap.engine.interfaces.cross.Destination.getNextAvailableBroker(Destination.java:53)
     at com.sap.engine.interfaces.cross.Destination.getRemoteBroker(Destination.java:33)
     at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:340)
     ... 36 more
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineJ2EE620OnlineDeployerImpl.performAction(DeploymentActionTypes).NO_CPO)
Deployment of irj finished with Error (Duration 13344 ms)
Starting Deployment of EPBC
Aborted: software component 'EPBC'/'sap.com'/'SAP AG'/'1000.7.00.11.0.20070201073900''/'6':
Failed deployment of SDAs:
development component 'irj'/'sap.com'/'SAP AG'/'7.0011.20070128005913.0000'/'6' : aborted
Please, look at error logs above for more information!
Deployment of EPBC finished with Error (Duration 11063 ms)

Can you please check this error while deploying SAP EU. which is important patch.
Starting Deployment of caf/eu/gp/ui/co
Finished with warnings: development component 'caf/eu/gp/ui/co'/'sap.com'/'MAIN_APL70VAL_C'/'1078313'/'3', grouped by software component 'SAP-EU'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.11.0.20070202075922''/'3':
Caught exception during application startup from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Error occurred while starting application sap.com/caf/eu/gp/ui/co and wait. Reason: Clusterwide exception: server ID 502981150:com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to prepare application ''sap.com/cafeugpuico'' for startup. Reason=Clusterwide exception: Failed to start application ''sap.com/cafeugpuico'': The referenced application ''sap.com/tcwd4vclauncher'' can''t be started. Check the causing exception for details. Hint: Is the referenced application deployed correctly on the server?
            at com.sap.engine.services.webdynpro.WebDynproContainer.prepareStart(WebDynproContainer.java:1519)
            at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:223)
            at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:171)
            at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:301)
            at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:342)
            at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:126)
            at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:245)
            at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4707)
            at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4612)
            at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4585)
            at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1163)
            at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
            at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
            at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
            at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
            at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
            at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
            at java.security.AccessController.doPrivileged(Native Method)
            at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
            at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment of caf/eu/gp/ui/co finished with Warning (Duration 7719 ms)
Starting Deployment of caf/eu/gp/ui/dt/comp/cons
Aborted: development component 'caf/eu/gp/ui/dt/comp/cons'/'sap.com'/'MAIN_APL70VAL_C'/'1078384'/'3', grouped by software component 'SAP-EU'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.11.0.20070202075922''/'3':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot deploy application sap.com/cafeugpuidtcompcons.. Reason: Clusterwide exception: Failed to deploy application sap.com/cafeugpuidtcompcons. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:             com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application sap.com/cafeugpuidtcompcons. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment of caf/eu/gp/ui/dt/comp/cons finished with Error (Duration 6031 ms)
Starting Deployment of SAP-EU
Aborted: software component 'SAP-EU'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.11.0.20070202075922''/'3':
Failed deployment of SDAs:
development component 'caf/eu/gp/ui/dt/comp/cons'/'sap.com'/'MAIN_APL70VAL_C'/'1078384'/'3' : aborted
Please, look at error logs above for more information!
Deployment of SAP-EU finished with Error (Duration 4516 ms)

Error while Upgrading 7.6 to 2007A - duplicate key in object 'dbo.NNM1'

Hello,
We are trying to upgrade our client from SBO 7.6 SP01 to SBO 2007 SP01 version (It is supported by sap to skip 2004 version)
Upgrade ends with the following error:
[Microsoft][SQL Server Native Client 10.0][SQL Server]The CREATE UNIQUE INDEX statement terminated because a duplicate key was found for the object name 'dbo.NNM1' and the index name 'NNM1_PRIMARY'. The duplicate key value is (0).
I can see with profiler, that upgrader is trying to do the following query:
ALTER TABLE [dbo].[NNM1] ADD CONSTRAINT [NNM1_PRIMARY] PRIMARY KEY (Series)
As I can see, in SBO 7.6 nnm1 table numbering was different than in the new versions (for example 2007A) u2013
In 7.6 ver. Numbering in u201Cseriesu201D column was starting from 0 within certain object, hereu2019s example:
<Objectcode>     <series>         <seriesname>
___17     __________0___     sales_order_series1
___17          __________1___     sales_order_series2
___17          __________2          ___sales_order_series3
___15          __________0          ___delivery_series1
___15          __________1          ___selivery_series2
In SAP 2007A version column series has unique values so for above example it should be:
<Objectcode>     <series>         <seriesname>
___17          __________0___          sales_order_series1
___17          __________1___          sales_order_series2
___17          __________2___          sales_order_series3
___15          __________3___          delivery_series1
___15          __________4___          selivery_series2
Anyone had that problem while upgrading from 7.6 to 2007A (or maybe from 7.6 to 2004?).

Dear Daniel,
Reported upgrade issue needs a further investigation therefore please log a support message with a component SBO-BC-UPG via the Service Market Place.
Please also attach 'UpgradeLog' files to the message. You will find the log files in the same directory as your B1 client (b1loggerPidxxxx_xxxxxxxxxxxxxx.txt; B1UpgradePidxxxx_xxxxxxxxxxxxxx.txt)
Regards,
Ladislav Meszaros
SAP Business One Forum Team

Error while updating the plan in Enterprise link

hi
i am getting an error while updating the plan which polls the JMS topic and inserts into the grid.
IMessageSourceReceiver->messageReceive: javax.jms.JMSSecurityException: JMS-232: An invalid user/password was specified for the JMS connection
     at oracle.jms.AQjmsDBConnMgr.checkForSecurityException(AQjmsDBConnMgr.java:916)
     at oracle.jms.AQjmsDBConnMgr.getConnection(AQjmsDBConnMgr.java:601)
     at oracle.jms.AQjmsDBConnMgr.<init>(AQjmsDBConnMgr.java:238)
     at oracle.jms.AQjmsConnection.<init>(AQjmsConnection.java:183)
     at oracle.jms.AQjmsTopicConnectionFactory.createTopicConnection(AQjmsTopicConnectionFactory.java:209)
     at iteration.enterpriselink.sources.JMSConsumer.start(JMSConsumer.java:94)
     at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.jmsConsumerStart(JMSMessageSourceReceiverImpl.java:1001)
     at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.messageReceive(JMSMessageSourceReceiverImpl.java:326)
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3A]
Error during Message Receive operation.
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3B]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Update of Plan "Untitled, created 3/11/2009 3:56:28 PM" failed.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0xD5]
the username and password that i have given are valid and i have given privileges that were mentioned on the technote to the user. can somebody help me out in resolving this as this is very critical for me right now
Thanks in advance

I also get error while updating the content in workflow thru the checkout option as reviewer. i.e. contributor checks in the content - then reviewer either updates the metadata or checks out and modifies the content and while checking in the following error occurs
Content Server Request Failed
Unable to update the content item information for 'HO000128'.
The content ID must be specified.
Please help to resolve.
Thanks in advance
Prasad

Error while upgrading the patch from RMS 13.1.1.1 to RMS 13.1.1.2

Hi,
While upgrading the rms dbschema from 13.1.1.1 to RMS 13.1.1.2 we are getting the following error update ALC_FREIGHT_COST table or view doesnt exist.
We have checked the data model of rms 13.1.1 and rms 13.1.2 and we couldnt find the table "ALC_FREIGHT_COST."
So anybody could give suggestions on this.
Appreciate your help
Thanks,
Suresh

I'd ignore the error for the moment and file an SR with OracleSupport to make them aware of the issue and release a better script - all of this assuming that your 13.1.1 starting point is valid and correctly installed.
Additionally you can locate the SQL upgrade script that is actually trying to do something on the mentioned table, and grasp what it is trying to achieve and how relevant that is for you.
The table exists in our 13.0.3 setup. The release notes of 13.1.0 mention a rework of cost component functionality, so seems like it was deprecated in that release.
Best regards,
Erik

Error while trying to raise a Goods Receipt PO in SAP B1 v 9.0

Hi Experts,
while trying to raise a Goods Receipt PO in SAP B1 v 9.0 the following error is been generated:
You should use existing Serial/batch number for this document type [21-59 ]
Note:We are able to generate Goods Receipt PO for an item which is not serialized.
Thanks
Regards,
Satish.

Hi Edy,
Dim oPDN As SAPbobsCOM.Documents
oPDN = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oPurchaseDeliveryNotes)
                oPDN.CardCode = "C232323"
                oPDN.Lines.ItemCode = "A00004"
                'oGR.Lines.LineNum = 0
                oPDN.Lines.BaseLine = 1
                oPDN.Lines.BaseEntry = 202
                'oGR.Lines.BaseRef = 203
                oPDN.Lines.BaseType = 20
                oPDN.Lines.Quantity = 1
                oPDN.Lines.UnitPrice = 2
                oPDN.Lines.WarehouseCode = '01'
                    oPDN.Lines.SerialNumbers.InternalSerialNumber = 3
                    oPDN.Lines.SerialNumbers.SystemSerialNumber = "Sh01"
                    oPDN.Lines.SerialNumbers.ManufacturerSerialNumber = "Mf01"
                    oPDN.Lines.SerialNumbers.SetCurrentLine(iRowNo)
                    oPDN.Lines.SerialNumbers.Add()
                End If
            Next
            oPDN.Lines.Add()
            lRetCode = oPDN.Add
Thanks,
Satish.

Error while upgrading NW04s to sp5

I installed NW04s in my machine. I am trying to upgrade it to sp5. I could upgrade the ABAP stack to sp5 without any problem. When i am doing java stack, i could update all other support packages except the one 'CAF05_0-10003464.SCA'. When this package is on progress, the process gets almost completed and gives the status also 'deployed'. But after that it throws the following error and the status also changed to 'not deployed'.
ERROR: Not updated. Deploy Service returned ERROR:
                     java.rmi.RemoteException: Exception in operation update with application sap.com/caf~tc..
                     Reason: com/sap/caf/metamodel/ApplicationInterface; nested exception is:
                          java.lang.NoClassDefFoundError: com/sap/caf/metamodel/ApplicationInterface
                          at com.sap.engine.services.deploy.server.DeployServiceImpl.update(DeployServiceImpl.java:682)
                          at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1278)
                          at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
                          at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
                          at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
                          at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
                          at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
                          at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
                          at java.security.AccessController.doPrivileged(Native Method)
                          at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
                          at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
                     Caused by: java.lang.NoClassDefFoundError: com/sap/caf/metamodel/ApplicationInterface
                          at java.lang.Class.getDeclaredMethods0(Native Method)
                          at java.lang.Class.privateGetDeclaredMethods(Class.java:1655)
                          at java.lang.Class.privateGetPublicMethods(Class.java:1778)
                          at java.lang.Class.privateGetPublicMethods(Class.java:1788)
                          at java.lang.Class.getMethods(Class.java:832)
                          at com.sap.engine.services.ejb.deploy.xml.MethodsExtractor.getWithNotSpecifiedMethodInterface(MethodsExtractor.java:156)
                          at com.sap.engine.services.ejb.deploy.xml.MethodsExtractor.getAllMethodsInBean(MethodsExtractor.java:103)
                          at com.sap.engine.services.ejb.deploy.xml.EJBJarParser.getMethodXml(EJBJarParser.java:1168)
                          at com.sap.engine.services.ejb.deploy.xml.EJBJarParser.processContainerTransaction(EJBJarParser.java:1023)
                          at com.sap.engine.services.ejb.deploy.xml.EJBJarParser.processAssemblyDescriptor(EJBJarParser.java:924)
                          at com.sap.engine.services.ejb.deploy.xml.EJBJarParser.parseXml(EJBJarParser.java:156)
                          at com.sap.engine.services.ejb.deploy.xml.EJBJarParser.parseXml(EJBJarParser.java:97)
                          at com.sap.engine.services.ejb.deploy.DeployAdmin.parseSingleJar(DeployAdmin.java:298)
                          at com.sap.engine.services.ejb.EJBAdmin.buildAppDescriptorBeforeUpdate(EJBAdmin.java:408)
                          at com.sap.engine.services.ejb.EJBAdmin.needUpdate(EJBAdmin.java:341)
                          at com.sap.engine.services.deploy.server.application.UpdateTransaction.getContainersWhichNeedUpdate(UpdateTransaction.java:537)
                          at com.sap.engine.services.deploy.server.application.UpdateTransaction.getConcernedContainers(UpdateTransaction.java:493)
                          at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:263)
                          at com.sap.engine.services.deploy.server.application.UpdateTransaction.begin(UpdateTransaction.java:164)
                          at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
                          at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
                          at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3184)
                          at com.sap.engine.services.deploy.server.DeployServiceImpl.update(DeployServiceImpl.java:670)
                          ... 10 more
                     For detailed information see the log file of the Deploy Service.
06/11/29 12:14:54 - ***********************************************************
Nov 29, 2006 12:14:54... Info: End of log messages of the target system.
Nov 29, 2006 12:14:54... Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Nov 29, 2006 12:14:54... Error: Aborted: development component 'caf/tc'/'sap.com'/'MAIN_APL70VAL_C'/'644873':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Exception in operation update with application sap.com/caf~tc..
Reason: com/sap/caf/metamodel/ApplicationInterface; nested exception is:
     java.lang.NoClassDefFoundError: com/sap/caf/metamodel/ApplicationInterface
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Nov 29, 2006 12:14:55... Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
Can anyone help me to sort out this problem?

Symptom
JSPM hangs by upgrade from SP4 to SP5 with the following message into the log file:
ERROR: Not updated. Deploy Service returned ERROR: java.rmi.RemoteException: Exception in operation
update with application sap.com/caf~tc..
Reason: com/sap/caf/rt/exception/CAFDeleteException; nested exception is: ,,java.lang.NoClassDefFoundError:
JUP fails by NW04 SP14 -> NW04s SP5 upgrade with the message into log file:
ERROR: Not updated. Deploy Service returned ERROR: java.rmi.RemoteException: Exception in operation
update with application sap.com/caf~tc..
Reason: com/sap/caf/rt/exception/CAFDeleteException; nested exception is: ,,java.lang.NoClassDefFoundError:
Reason and Prerequisites
Deployment of CAF component sap.com/caf~tc failed by deployment scenario of type:
1. The application is deployed with a reference to Lib1, where Class A
is included.
2. Then class A is moved from Lib1 to Lib2 (removed from Lib1);
3. Then the new version of the application which has references to both
libraries Lib1 and Lib2 is deployed via SDM;
4. The deployment fails with NoClassDefFoundError: class A.
For patricular case we have the situation:
The class com/sap/caf/rt/exception/CAFDeleteException was moved from
caf/runtime/ear to caf/runtime/api/lib between the SPs.
Solution
Please follow the steps:
1. Close JSPM application
2. Start <device>:\usr\sap\<sid>\JC<instance number>\SDM\program\RemoteGui.bat
3. From the menu invoke "SDM Gui" -> "Login" and enter your SDM password
4. Navigate to tab "Undeployment" and select CAF component caf~tc, press button "Select" and "Start Undeployment" and complete undeployment confirming it.
5. Navigate to tab "Deployment" and select CAF component using plus button and select option "Update deployed SDA/SCAs that have any version" into Deployment configuration options below and complete deployment confirming it.
6. Close "SDM Gui" application.
7. Restart JSPM and on the step "Select package type" select option "Single support packages" in order to update all other components, which left not deployed.
8. On step "Specify Queue" select all not deployed components and complete their deployment.
An alternative way is:
1. If there is a problem with CAF deployment do not stop the upgrade application.
2. Open command prompt and go to SDM\program directory
3. Execute: sdm jstartup "mode=integrated"
4. Execute: startserver
5. After that start the SDM remote GUI application
6. From the menu invoke "SDM Gui" -> "Login" and enter your SDM password
7. Navigate to tab "Undeployment" and select CAF component caf~tc, press button "Select" and "Start Undeployment" and complete undeployment confirming it.
8. Logout and close "SDM Gui" application.
9. In the command prompt execute: stopserver
10. In the command prompt execute: sdm jstartup "mode=standalone"
11. Go to the Upgrade application and restart the process from the point of failure
Best Regards,
Barry.

Error while upgrading SAP R/3 Enterprise 4.7 to SAP ECC 5.0

Similar Messages

Maybe you are looking for