Error while uploading cost element planning data into KP06 transaction

Hi,
I am facing the below error while uploading the Cost Element Planning excel file in KP06 transaction code. Please help me in fix this issue.
We are trying to enter a budget upload using Transaction code: KP06. We get the following message errors when we do this. It seems revenue accounts cannot be entered using cost centers. Question, how should these accounts be added? Kindly help me how to add Revenue cost elements to this planning?
Error accured when generating data for the planning processor
Messange no.K9400
Revenue element 451000 can not be planned on cost center 9720
Thanks
Kishore

The cost element which have category 01 only can be planned in the Kp06.
Regards
Ranjan

Similar Messages

Error while uploading an edited excel file into an internal table

Hi Experts,
I am getting error while uploading an excel file that has been edited.
I am using GUI_UPLOAD for uploading the file into internal table.
In my program I first have to download a file, if I use the same file without editing I am able to read the file.
When I try to edit it and then use it to upload it fails, but this is part of the my requirement.
PLease suggest.
Regards
Kishore

TYPE-POOLS: truxs.
parameter :    lv_full_path     TYPE rlgrap-filename,
data : lt_conv_data   TYPE truxs_t_text_data,
          lt_roles_excel   type table of ( your structure).
start-of-selection.
        CALL FUNCTION 'SAP_CONVERT_TO_XLS_FORMAT'
          EXPORTING
            i_line_header        = 'X'
            i_filename           = lv_full_path
          TABLES
            i_tab_sap_data       = lt_roles_excel
          CHANGING
            i_tab_converted_data = lt_conv_data
          EXCEPTIONS
            conversion_failed    = 1
            OTHERS               = 2.
In the FM Line_header = 'X' means it will negelect the first line. So u can give the heading in the excel file.
Hope this might help u .
With Regards,
Sumodh.P

Retraction Cost Center Plan Data into SAP R/3

Hi All,
I am working on Integrated Planning and we have a requirement to retract the Cost Center Plan data to SAP R/3. Can anyone tell me how to do it in SAP BI-IP envirinment.
Regards
keyrun

Hi Keyrun:
Please refer to slide 7 of document below.
"SAP NetWeaver 7.0 Data Retraction in BI Integrated Planning"
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30af46fb-eb4f-2a10-4899-9167af035742?quicklink=index&overridelayout=true
>Online documentation: http://help.sap.com/saphelp_sem60ep1/helpdata/en/99/97157967e3440a94d199538959cd0b/frameset.htm
>See SAP Note 525543 for additional documentation on field mapping.
Regards,
Francisco Milán.
Edited by: Francisco Milan on Jun 22, 2010 8:13 PM

Cost center planning data table and transaction code to view

Hi,
I want to see the cost center planning document. In which transaction code, I can see this document.
In which table, cost center planning data is stored?
Regards,
VS ramaiah
Moderator: Please, search SDN

Hello,
I do not think that COEP contains the plan line items*. For plan line items it is COEJ. But as suggested by Christian the better option in case you want to create a report is you use COSS/COSP and COST. The latter is for activity type planning (KP26) and the other two are for cost planning (KP06).
The transactions to view the plan document is KABP and line items is KSBP.
* Christian, do correct me if I'm wrong. I was not able to see anything with value type 01 in COEP.
Kind Regards // Shaubhik

Error while Creating cost element under category 90

Dear Experts,
I have some Balance Sheet related G/L account, which I have created as cost element through transaction KA01, system gives an info message saying its an BS related account, if I ignore that message and proceed further it creates a Cost element with category (system automatically picks the category and the field gets into gray mode) 90.
We have created one more BS G/L account today and trying to create the cost element for the new G/L account, system is producing an error message:
G/L account 3200220 is a balance sheet account
Message no. KS036
Field status group     R005     Material accounts is maintained
Can some one guide me to rectify this error?
Thanks in advance,
Regards,
Praveen

Hi,
The use of cost element category 90 is only provided
in the following two cases (note Note 75980):
1. asset acquisitions and down payments which are
   assigned directly to a fixed asset or asset under construction can
   be assigned to an account on internal orders or WBS elements
   statistically.
2. cost elements of category 90 can also be created
   for material stock accounts to display material make-to-order stocks
   on sales orders or customer projects.
If you G/L account does NOT correspond to the standard cases 1) or 2),
you can (on your own responsibility)
both deactivate the account assignment
check in the CO interface (message KI098) and when you create cost
elements (message KS036). Both checks are deactivated by maintaining
Transaction OBA5. Deactivate message KI098. Message KS036 cannot be
deactivated directly with Transaction OBA5 - rather, it is deactivated
indirectly when you deactivate message KI098.
The message must be DE-ACTIVATED. Please do not set it to any other
type. Please proceed as follows:
Please call OBA5 in the production system - if not set to changeable
please do this in Your development system.
In OBA5 choose KI and in the detail screen add 098.
Then set the type of warning to "-".
Best regards,
MLM

Error : while converting a WD ABAP object into SAP Transaction

Hi,
I am trying to converting a WD ABAP object into SAP Transaction but i am getting the following error while executing the transaction :
Network Access Message: The page cannot be displayed
Technical Information (for Support personnel)
Error Code: 502 Proxy Error. The specified Secure Sockets Layer (SSL) port is not allowed. ISA Server is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. (12204)
IP Address: 10.114.6.144
Date: 4/7/2011 10:41:
Please help.

> ISA Server is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. (12204)
This seems to be your specific network configuration. It seems that your corporate network is blocking HTTPS requests which don't use port 443. Your ABAP system is configured to use a port other than 443. Either talk to your basis admins about changing your ABAP system configuration to use port 443 or talk to your network administrators to allow whichever port the ABAP system is running on.

ERROR WHILE UPLOADING FUNCTIONAL LOCATION MASTER DATA THROUGH LSMW?????

Dear Experts,
I am uploading the master data of functional location through LSMW .I had completed all the steps except "Run Batch Input Session".
In that step it is showing as functional location already exists, after this error the remaining functional locations are updated in sap or it will stop total transaction by this error???
how can u upload the remaining in to sap by skipping already existed one????
here I am uploading the error screen shot.
Thanks & Regards,
Sunil Boya

Hi Jogeswara Rao Kavala,
When I am pressing back or NO option it is showing error like this
What is this OK- Code means?
how can I resume this process, even it was not going to back screen also and only one option is available for exit from this is by going into MENU-SYSTEM-SERVICES-BATCH INPUT-CANCEL.
Sunil Boya

Facing error while uploading Business partner supplier data in MDG

Hi Experts,
I am trying to upload Business partner data for supplier in MDG.
I am following the document: Installing, Configuring, and Using the Excel Up... | SCN
The system gives an error that : Business partner does not exists. It is not able to create a new BP.
Please check the error log in the attachment.
However if I give any existing BP number under the Vendor number in the csv file, this updates the BP successfully.
Please help me if you have faced similar situation.
Thanks &regards
Ashwini

Hi Paul,
I was logged on as manager (superuser). So that was not the problem. But your advice to check account settings help me to find the answer:
In Administration -> Setup -> Financials -> G/L Account Determination in TAB Sales/General the field "Permit Change of Control Accounts" was not filled.
After filling the field we can change country again.
So thank you for your helpful answer.
regards,
Daniel

Error while uploading cost centre

Hi Experts,
I am trying to upload the cost centres against org unit in pre-production client in PP01
After giving relationship A011 and selecting the cost centre if I am clicking on save it is throwing this error "Personnel number 123456 does not exist"
Pls let me know your what would be the cause
Thanks

Hi,
error "Indicators are not their for controlling area" but I hav given the controlling area as well
please check you have now controlling area for fiscal year 2011, or desired year.
i think you do not have for the fiscal year that you are trying the same.
go to OKKP for your controlling area for fiscal year 2011 & select in as CoCd->CO Area ( controlling area same as company code) and active components/control indicators for { Cost Centers : Component Active ,Order Mgmt: Component Active } and then save.
or it might be in T.Code: OKE5
Check whether control indicators is checked in OKE5 or not.
this is done by FI consultant. if you have authorization then do it, if not consult your FI consultant.
regards,
mohammed
Edited by: 0mohammed1 on Nov 9, 2011 5:23 PM

Error while uploading R/3 Derived Role into EP

Dear all,
When i was trying to upload the derived role from backend R/3 system. It's giving following error.
com.sap.portal.pcd.rolemigration.RoleMigrationException: Nested Exception. Failure to execute native function. Nested Exception. ROLE_IS_DERIVED - message at com.sap.portal.pcd.rolemigration.util.Connector.callFunction(HQ1CLNT230,en_US,pradeep,TWPN_GET_ROLE,ROLE_TABLE,{ENABLE_LOGGING= , ROLENAME=ZR:GT_CUSTOMER_001, MENUTEXTS_ONLY_IN_MASTERLANG= }): Check parameters. Nested Exception. ROLE_IS_DERIVED at com.sap.portal.pcd.rolemigration.util.Connector.callFunction(Connector.java:244) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.migrate(RoleMigrationObject.java:1699) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.migrate(RoleMigrationObject.java:769) at com.sap.portal.pcd.rolemigration.RoleMigrationThread.run(RoleMigrationThread.java:488) Original exception: com.sapportals.connector.ConnectorException: Nested Exception. ROLE_IS_DERIVED at com.sapportals.connectors.SAPCFConnector.SAPConnectorException.getNewConnectionException(SAPConnectorException.java:67) at com.sapportals.connectors.SAPCFConnector.execution.functions.SAPCFConnectorInteraction.execute(SAPCFConnectorInteraction.java:318) at com.sapportals.connectors.SAPCFConnector.execution.functions.SAPCFConnectorInteraction.execute(SAPCFConnectorInteraction.java:411) at com.sapportals.connectors.SAPCFConnector.execution.functions.SAPCFConnectorInteraction.execute(SAPCFConnectorInteraction.java:433) at com.sap.portal.pcd.rolemigration.util.Connector.callFunction(Connector.java:403) at com.sap.portal.pcd.rolemigration.util.Connector.callFunction(Connector.java:148) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.migrate(RoleMigrationObject.java:1699) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.migrate(RoleMigrationObject.java:769) at com.sap.portal.pcd.rolemigration.RoleMigrationThread.run(RoleMigrationThread.java:488)
Kindly Suggeset me
Rgds
PRadeep

Pradeep,
Kindly explain the process flow of your upload.
James

Error While uploading Long Text for Operations in IA05 Transaction.

Dear Team,
Good Day.
While we are trying to upload the Long Text through BDC for IA05 operations the text is updating in Database but it is not visible in the long Text field. Is it possible to upload the long text through BDC or any bapi's which can be used for the same. Any configuration needed for this please do the needful.
Regards,
Bhanu.

Hi Bhanu
correct me if im wrong, the long text is a multiline text, its an object for text, this cant be filled with BDC since this object can not be created in background mode, so i think the bdc skip the routines to fill this object, you can use the save_text function right after the transaction ends
Regards
MC

Getting error while uploading gl master data using LSMW batch input data

Hi Experts,
I am getting error while uploading the GL master data through lsmw using batch input recording.
After completion of all steps at the time of running batch input session error i am getting is "maintain EN language discription"
and Pls tell me is it possible to upload transactional data using lsmw? if yes pls explaing briefly.

Hello,
Kindly post in the FI forum to get a better response.
Regarding the issue you might check whether the correct column is being picked up where you have maintained the description.
Kind Regards // Shaubhik

Error While Uploading GL Master Data in LSMW

Hello Experts,
I am running into error while uploading GL master data in LSMW, I created recording through FS00, then I mapped the fields, it all went good till 13th step, but last step got stuck(Run Batch Input Session), when I am running batch input session, system is showing this message "Function Code cannot be selected"
Your help would be highly appreciated.
Regards
Muhammad Yousuf Ali
SAP FI Consultant

Hi,
first can you pls check your Hierarchy mode setting in FS00 - before executing Batch input session -
Open FS00 - go to settings - and Do not display navigation tree select radio button and save it
then Now Run fresh LSMW - your issue will resolve
Mahesh

Error while uploading the data using FM"upload"

Hi,
I encountering an error while uploading the data using text file with FM " UPLOAD"
The error is "File does not exist or cannot be opened "
But there is a file with name and extenstion right.
Regards
Vishnu

You have to create RC29P-IDNRK(var) using concatenate statement. Try this.
DATA: new_mark TYPE bdcdata-fnam.
CONCATENATE 'RC29P-IDNRK(' var ')' INTO new_mark.
PERFORM bdc_field USING new_mark W_BOM-QTY

Error While Uploading Captivate 6 Projects into Oracle LMS

Hello,
We have recently updated our Captivate software from Captivate 5 to Captivate 6. We are now experiencing issues when uploading our Captivate projects into our Oracle LMS. We are unable to upload newly developed courseware as a result, and have many critical learning initiatives with deadlines coming up within our organization.
We receive the following error when uploading published Captivate 6 files into our LMS:
Oracle.xml.parser.v2.XMLParseException: Element ‘appearance’ not expected.
The Log states: “The operation could not find a learning object with the external identifier: and external source: . A new learning object named How to insert an image into Microsoft Word with id 2824 has been created.
The language en-US is not compatible for the learning object named How to insert an image into Microsoft Word (id: 2824). The language will be set to American English.
The import process has failed: oracle.xml.parser.v2.XMLParseException: Element 'appearance' not expected.”
When contacting Oracle, they directed me to contact the vendor and inquire if they have resolved their UNIX issues and corrected the imsmanifest.xml creation piece of the tool. The Captivate 6 software on my PC is up to date with the newest patch installed, and I have tried publishing courses with different combinations of preferences and settings and none seem to resolve the issue.
Any insight as to what is causing this error or what can be done to correct it?
Thanks.

The error message makes me think the LMS is looking for an MS Word document included in your SCORM manifest file. Some LMSs are very strict about all files in the course needing to be listed in the imsmanifest.xml file.
Do you have a document in the package that the users need to read or that is linked in some way to your course content?

Error while uploading cost element planning data into KP06 transaction

Similar Messages

Maybe you are looking for