Error while uploading excel file

Hi All,
I am using class cl_gui_frontend_services=>gui_upload, to upload an excel file for ASCII as well as for DAT format.
I am passing the following parameters to the method :
IF ascii EQ 'X'.
CALL METHOD cl_gui_frontend_services=>gui_upload
        EXPORTING
          filename                = gv_filename
          filetype                = 'ASC'
          has_field_separator     = space
        CHANGING
          data_tab                = inputdata_itab
        EXCEPTIONS
          file_open_error         = 1
          file_read_error         = 2
          no_batch                = 3
          gui_refuse_filetransfer = 4
          invalid_type            = 5
          no_authority            = 6
          unknown_error           = 7
          bad_data_format         = 8
          header_not_allowed      = 9
          separator_not_allowed   = 10
          header_too_long         = 11
          unknown_dp_error        = 12
          access_denied           = 13
          dp_out_of_memory        = 14
          disk_full               = 15
          dp_timeout              = 16
          not_supported_by_gui    = 17
          error_no_gui            = 18
          others                  = 19
ELSEIF dat EQ 'X'.
CALL METHOD cl_gui_frontend_services=>gui_upload
        EXPORTING
          filename                = gv_filename
          filetype                = 'DAT'
          has_field_separator     = 'X'
        CHANGING
          data_tab                = inputdata_itab
        EXCEPTIONS
          file_open_error         = 1
          file_read_error         = 2
          no_batch                = 3
          gui_refuse_filetransfer = 4
          invalid_type            = 5
          no_authority            = 6
          unknown_error           = 7
          bad_data_format         = 8
          header_not_allowed      = 9
          separator_not_allowed   = 10
          header_too_long         = 11
          unknown_dp_error        = 12
          access_denied           = 13
          dp_out_of_memory        = 14
          disk_full               = 15
          dp_timeout              = 16
          not_supported_by_gui    = 17
          error_no_gui            = 18
          others                  = 19.
endif.
In both the cases it is giving junk characters in the inetrnal table 'inputdata_tab'.
I tried without using the separator also but still sam eerror.
Can anyone please help me out of this.
Thanks in Advance.
Sunanda.

Hi Sunanda,
Kindly go through this link below link, have posted one wiki on this topic:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/upload%252bexcel%252bdocument%252binto%252binternal%252btable
Hope it helps
Regrds
Mansi

Similar Messages

Error Raised while uploading Excel file to SAP

Hi All,
I am getting error while uploading excel file into SAP using the function module 'TEXT_CONVERT_XLS_TO_SAP'.
Error Message is UX(893) - 'Excel file & cannot be processed' .
Please let me know what went wrong.
Regards,
Deepthi

Hi,
1 .TEXT_CONVERT_XLS_TO_SAP Funtion module will work if you have installed Microsoft Excel at front end.
2. Whenyou declare internal table for upload, specify the char only in the strcture ,don't specify any data element or dictionary reference.    If the data element and dictionaly reference is character field then its ok.
eg.
types:begin of st_data,
           field1 type char15,
           field2 type char23,
          endif.
3. Close the excel before you upload
Hope this might solve your issue.
Regards
Aromal R

Error message while upload excel file (with macro) to sap (iw28)

While upload excel file to sap through iw28, i get error message (vb)
u2022 i have to say that the excel file contain macro , with out the macro , work fine .
u2022 The error display just in refresh command.
the error message :
Public Sub ALV_CUS_Exit()
Dim objs As ChartObjects
Dim obj As ChartObject
Dim sheet As Worksheet
Dim r As Range
For Each sheet In Sheets
Set objs = sheet.ChartObjects
For Each obj In objs
Set r = Sheets("RawData").UsedRange
obj.Chart.SetSourceData Source:=r
Next obj
Next sheet
End Sub

hi,
This is releated to the ABAP coding...There might be some ouput problem in the Abap list viewer...Pls check it with the ABAP consultant...
Regards
Priyanka.P

Getting error while uploading multiple files in sharepoint hosted app in 2013 with REST API

Hi All,
In one of my tasks, I was struck with one issue, that is "While uploading multiple files into custom list with REST API".
Iam trying to upload multiple files in library with REST calls for an APP development, my issue is if i wants to upload 4 image at once its storing only
3 image file and further giving "Conflict" error". Below is the attached screenshot of exact error.
Error within screenshot are : status Code : 409
status Text :conflict
For this operation i am uploading different files as an attachment to an list item, below is the code used for uploading multiple files.
my code is
function PerformUpload(listName, fileName, listItem, fileData)
var urlOfAttachment="";
// var itemId = listItem.get_id();
urlOfAttachment = appWebUrl + "/_api/web/lists/GetByTitle('" + listName + "')/items(" + listItem + ")/AttachmentFiles/add(FileName='" + fileName + "')"
// use the request executor (cross domain library) to perform the upload
var reqExecutor = new SP.RequestExecutor(appWebUrl);
reqExecutor.executeAsync({
url: urlOfAttachment,
method: "POST",
headers: {
"Accept": "application/json; odata=verbose",
"X-RequestDigest": digest
contentType: "application/json;odata=verbose",
binaryStringRequestBody: true,
body: fileData,
success: function (x, y, z) {
alert("Success!");
error: function (x, y, z) {
alert(z);

Hi,
THis is common issue if your file size exceeds
upload a document of size more than 1mb. worksss well for kb files.
https://social.technet.microsoft.com/Forums/office/en-US/b888ac78-eb4e-4653-b69d-1917c84cc777/getting-error-while-uploading-multiple-files-in-sharepoint-hosted-app-in-2013-with-rest-api?forum=sharepointdevelopment
or try the below method
https://social.technet.microsoft.com/Forums/office/en-US/40b0cb04-1fbb-4639-96f3-a95fe3bdbd78/upload-files-using-rest-api-in-sharepoint-2013?forum=sharepointdevelopment
Please remember to click 'Mark as Answer' on the answer if it helps you

Error while uploading .xml file for Customer/Vendor List for Italy

Hi All,
We are facing problem while uploading the .xml file in DMEE transaction for the new Customer/Vendor List for Italy.
We have followed the entire process given in the OSS Note(1090857).
We have SAP 4.6c and followed the below steps:
1. Created ID-FI-IT Development class
2. Added domains
3. Added Data elements
4. Tried to upload the given .xml file and got any error saying ".xml file could not be interpreted".
Also there is a .SAR file mentioned to upload if we receive any errors while uploading .xml file.
Tried uploading the .SAR file also. STill we are recieving the same Error.
Can any one of you help us out.
Thanks in Advance.
Ramesh

Ok, we upload .SAR file in this way:
1. unpack .SAR file with SAPCAR.EXE program. Yuo obtain 2 files
R492445.P9C and K492445.P9C
2. put K492445.P9C in directory \SAPMNT\TRANS\COFILES and put R492445.P9C in directory \SAPMNT\TRANS\DATA of your system (DEV, TST or PRD)
3. Use Tx STMS. If You want create DMEE tree in DEV system, go to DEV import queue. Choose menu Extras | Other requests | Add. Insert P9CK492445 in Transp. request field.
4. Import the request. This creates the DMEE tree. You don't need ti upload XML file after. You can see the DMEE tree created with Tx DMEE and inserting
Tree type UMS1
Format tree IT_CUST_VEN_LIST
5. after continue follow the note
I hope this help you
Roberto

(409) Conflict Error while uploading the file into Sharepoint library

Getting the below error while uploading the file into Sharepoint library.
(409) Conflict. at System.Net.HttpWebRequest.GetResponse() at Microsoft.SharePoint.Client.SPWebRequestExecutor.Execute() at Microsoft.SharePoint.Client.File.SaveBinary(ClientContext context, String serverRelativeUrl,
Stream stream, String etag, Boolean overwriteIfExists
I have used the below code:
ClientOM.File.SaveBinaryDirect(clientContext, "/Shared%20Documents/NewDocument.pptx", memoryStream, true);
Thanks in advance.

May be issue is with path.
https://server/ should be there instead of
subsite path(https://server/path/path)
in the client context
Check the below link
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/fbb38b10-1127-48a6-a65f-0301edd766c4/the-remote-server-returned-an-error-409-conflict-error-while-uploading-files-to-sharepoint?forum=sharepointdevelopmentlegacy

UCCX 8.0 "Error while uploading the file. Please try again."

I was on UCCX version 8.0.2.11003-10 and i was able to upload an script with the same name as an old one (overwrite).
Upgrade to UCCX 8.0.2.11004-12 and now I am receiving the error: "Error while uploading the file. Please try again."
There was a bug CSCth09248 that affected version 7 but supposed to be fixed on version 8 and was fixed on an earlier version. But after moving to a minor patch, problem came back...
Any ideas?

Hi,
I belive the bug was initially opened to fix the issue when uploading script fails when using wizard to configure uccx.
But now they have re-opened the same bug instead of opened a new one for the issue that you have.
I looked at the case attached to that bug, case # 617145545. Below is the problem description that customer has which is same as yours and this bug has been re-opened to fix this particular problem.
When I tried to upload a modified script with an existing file name, the message "script file already exists.
Overwrite existing script file, continue?" comes up and when I select "OK" then,
it dispaly Status "Error while uploading the file. Please try again".
If I remove an existing file first, it will upload fine.
Using UCCX Admin 8.0.2.11004-12 and UCCX Editor 8.0(2.0).
Thanks
Ankita

SharePoint 2013 Foundation error when uploading Excel files

Hello
I have a specific problem. I have an xlsx file that I cannot upload in SharePoint. Normally our SharePoint can upload Excel files and other file formats normally but this one has data with nearly 5000 rows. The size of the file is less then 500 KB. The error
message is: "The URL is invalid. Perhaps it refers to a nonexistent file or folder, or it refers to a valid file or folder in the current Web." When I am uploading this file I am getting the same error message in every library. When I save
the file as a 97-2003 compatible xls then it works. Sometimes even Excel files with Macros won't upload.
Kind regards
ivicapro1987

Hi,
This issue occurs when the Version column is configured as an Indexed Column.
To work around this issue, remove the Version column from the list of Indexed Columns for the list that has this issue. To do this, follow these steps:
Browse to the list where the issue exists.
In the ribbon, click the Library tab, and then click
Library Settings.
In the fields list, click Indexed Columns.
In the Indexed Columns list, click Version.
Click Delete, and then click OK.
Upload any files that you previously experienced the issue with.
Reference:
https://support.microsoft.com/kb/2796640?wa=wsignin1.0
Best Regards,
Eric
Eric Tao
TechNet Community Support

Error in uploading excel file using Java pages

Hello,
We are using oracle ERP (R12.1.1) and we have developed one JSP page to upload an excel.
After selecting the excel and browse button is clicked we are gettign the OLE stream error when the excel file is .csv or .xlsx. There is no issue with .xls excel files. For loading the excel data to custom table we are using the "jxl-2.6.jar".
Can we get higher version of "jxl-2.6.jar to support CSV upload?
Thanks.

Are you Registered this jsp upload page to EBS before test?
You have to register the page to EBS first.
Regards,
Dilip

Error while uploading text file....

Halo Friends,
I am uploading 4 text files which contain three columns separated by a tab, but when i am trying to upload those files using WS_UPLOAD Function Module i am getting a runtime error saying 'error while uploading/downloading'.
Please solve this problem as soon as possible.
Thanks in Advance,
rama

Halo again,
Now that i am able to upload the files, i need to update the database table the update statement is executing correctly but when i debug i see that the sy-subrc value is 4 but not 0.
and hence the it is not committed.
Any suggestions. i am pasting my code here for your reference:
Tables: qmfe.
data: begin of gt1_qmfe occurs 0,
      qmnum       like qmfe-qmnum,
      fenum       like qmfe-fenum,
      /itml/usr20 like qmfe-/itml/usr20,
      end of gt1_qmfe.
data: begin of gt2_qmfe occurs 0,
      qmnum       like qmfe-qmnum,
      fenum       like qmfe-fenum,
      /itml/usr21 like qmfe-/itml/usr21,
      end of gt2_qmfe.
data: begin of gt3_qmfe occurs 0,
      qmnum       like qmfe-qmnum,
      fenum       like qmfe-fenum,
      /itml/usr19 like qmfe-/itml/usr19,
      end of gt3_qmfe.
data: begin of gt4_qmfe occurs 0,
      qmnum       like qmfe-qmnum,
      fenum       like qmfe-fenum,
      /itml/usr07 like qmfe-/itml/usr07,
      end of gt4_qmfe.
data: gs1_qmfe like line of gt1_qmfe,
      gs2_qmfe like line of gt2_qmfe,
      gs3_qmfe like line of gt3_qmfe,
      gs4_qmfe like line of gt4_qmfe.
data: ls_lines1 type i,
      ls_lines2 type i,
      ls_lines3 type i,
      ls_lines4 type i.
parameters: ip_file1 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\StoDt.txt'     obligatory,
            ip_file2 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\RcDtCust.txt' obligatory,
            ip_file3 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\DockDate.txt' obligatory,
            ip_file4 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\AWB.txt'       obligatory.
field-symbols: <fs1> like gs1_qmfe,
               <fs2> like gs2_qmfe,
               <fs3> like gs3_qmfe,
               <fs4> like gs4_qmfe.
perform upload_gt1_qmfe.
perform upload_gt2_qmfe.
perform upload_gt3_qmfe.
perform upload_gt4_qmfe.
perform update_qmfe.
*&      Form upload_gt1_qmfe
      text
--> p1        text
<-- p2        text
FORM upload_gt1_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
   FILENAME                      = ip_file1
   FILETYPE                      = 'DAT'
TABLES
    DATA_TAB                      = gt1_qmfe.
describe table gt1_qmfe lines ls_lines1.
write: / ls_lines1.
ENDFORM.                    " upload_gt1_qmfe
*&      Form upload_gt2_qmfe
      text
--> p1        text
<-- p2        text
FORM upload_gt2_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
   FILENAME                      = ip_file2
   FILETYPE                      = 'DAT'
TABLES
    DATA_TAB                      = gt2_qmfe.
describe table gt2_qmfe lines ls_lines2.
write: / ls_lines2.
ENDFORM.                    " upload_gt2_qmfe
*&      Form upload_gt3_qmfe
      text
--> p1        text
<-- p2        text
FORM upload_gt3_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
   FILENAME                      = ip_file3
   FILETYPE                      = 'DAT'
TABLES
    DATA_TAB                      = gt3_qmfe.
describe table gt3_qmfe lines ls_lines3.
write: / ls_lines3.
ENDFORM.                    " upload_gt3_qmfe
*&      Form upload_gt4_qmfe
      text
--> p1        text
<-- p2        text
FORM upload_gt4_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
   FILENAME                      = ip_file4
   FILETYPE                      = 'DAT'
TABLES
    DATA_TAB                      = gt4_qmfe.
describe table gt4_qmfe lines ls_lines4.
write: / ls_lines4.
ENDFORM.                    " upload_gt4_qmfe
*&      Form update_qmfe
      text
--> p1        text
<-- p2        text
FORM update_qmfe .
data ls_cnt type i.
loop at gt1_qmfe assigning <fs1>.
update qmfe set    /itml/usr20 = <fs1>-/itml/usr20
            where qmnum       = <fs1>-qmnum
            and    fenum       = <fs1>-fenum.
if sy-subrc = 0.
commit work.
add 1 to ls_cnt.
endif.
endloop.
write: / ls_cnt.
ENDFORM.                    " update_qmfe

CC 5.2: Error while uploading rule file

Hi all,
I have encountered the following error while uploading the Function-Action rule file into CC 5.2:
"Array Index out of range: 2"
Can anyone tell me why I am getting this error?
Thanks.

Hi Matthew,
Yes, you are right. It is due to spacings in the cells. Once removed them, the files are uploaded successfully. Thanks for the input.
Cheers.

Error while uploading the file from Allpcation server in LSMW-7th step

Hi Experts,
what should be the specific CODE PAGE should be maintained while uploading the file from application server in LSMW-7th Step
Thanks in advance,
KSR

Hi
I mean that there is any seperate CODE PAGE which comes at the bottom of screen while uploading the file from the application server in 7th step.
Is there any specific CODE PAGE to be maintained...
Thanks in advance
Oarsk

Error while uploading tiff file using report "RSTXLDMC"

Hi Experts,
I am trying to upload .tif file into SAP usinf report "RSTXLDMC".
Getting below error.
Uploading TIFF Files to SAPscript Texts
Load File
c:\file.tif
The file contains    134,412 bytes
This is a TIFF file with MOTOROLA byte order
First IFD offset:                                        8
Reading IFD from offset          8 Number of Tags         13
ImageWidth:                                          5,120
ImageLength:                                         6,590
Compression:                                             2
Photometric Interpretation:                              0
Number of StripOffsets:                                  5
RowsPerStrip:                                        1,636
Number of StripByteCounts:                               5
XResolution:                                           600 /          1
YResolution:                                           600 /          1
ResolutionUnit:                                          2
This is a baseline TIFF 6.0 BILEVEL file
TIFF upload not possible, compression type 2 not supported
How to solve this ????
Please help.
Regards,
SVS

Dear Vijay,
I have one tiff 6.0 image which i am passing to program "RSTXLDMC".
I have not done any conversion or changes in the file.
Regards,
Sagar Sontakke

Error while uploading a file using ke13 transactoin

Hi..
We have the following error when uploading a project plan by cost element excel upload using KE13 transaction...
There is a z program that calls this ke13 program while uploading. The excel file is split into x files and uploaded..
THe error is: Quantity Unit HR cannot be converted to & and error occured when generating data for planning processor...
Any idea if someone face similar situation..
Any clue would help us..
Thanks,
Kanthi.

Hi,
Covert quantity to char and upload the data.
Regards
Amole

Error while uploading WSDL file in Interactive Form Data Connection!

I have created we service to return some data based on user input.
I am trying to link this webservice to Interactive adobe form! and While creating new data connection->uploading WSDL file--> I am receiving error i.e. Invalid File.
Please help me in resolving this issue.
I have created this WSDL file copy/pasting XML code generates from "Open WSDL document for selected binding" link in SOAMANAGER.
Regards,
Naveen.I

Hello,
This is a Webservice created for the FM : HRXSS_PER_READ_EMERGENCY_AR
Here is the sample of the WSDL file generated, as asked by you.
<?xml version="1.0" encoding="utf-8" ?>
- <wsdl:definitions targetNamespace="urn:sap-com:document:sap:soap:functions:mc-style" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="urn:sap-com:document:sap:soap:functions:mc-style" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:n1="urn:sap-com:document:sap:rfc:functions">
- <wsdl:documentation>
<sidl:sidl xmlns:sidl="http://www.sap.com/2007/03/sidl" />
</wsdl:documentation>
<wsp:UsingPolicy wsdl:required="true" />
- <wsp:Policy wsu:Id="BN_BN_ZHR_READ_EMERGENCY">
<saptrnbnd:OptimizedXMLTransfer uri="http://xml.sap.com/2006/11/esi/esp/binxml" xmlns:saptrnbnd="http://www.sap.com/webas/710/soap/features/transportbinding/" wsp:Optional="true" />
<saptrnbnd:OptimizedXMLTransfer uri="http://www.w3.org/2004/08/soap/features/http-optimization" xmlns:saptrnbnd="http://www.sap.com/webas/710/soap/features/transportbinding/" wsp:Optional="true" />
- <wsp:ExactlyOne xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:sapsp="http://www.sap.com/webas/630/soap/features/security/policy" xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702" xmlns:wsa="http://www.w3.org/2005/08/addressing" xmlns:wsu="http://schemas.xmlsoap.org/ws/2002/07/utility">
- <wsp:All>
- <sp:TransportBinding>
- <wsp:Policy>
- <sp:TransportToken>
- <wsp:Policy>
<sp:HttpsToken />
</wsp:Policy>
</sp:TransportToken>
- <sp:AlgorithmSuite>
- <wsp:Policy>
<sp:TripleDesRsa15 />
</wsp:Policy>
</sp:AlgorithmSuite>
- <sp:Layout>
- <wsp:Policy>
<sp:Strict />
</wsp:Policy>
</sp:Layout>
</wsp:Policy>
</sp:TransportBinding>
</wsp:All>
</wsp:ExactlyOne>
</wsp:Policy>
- <wsp:Policy wsu:Id="IF_IF_ZHR_READ_EMERGENCY">
- <sapsession:Session xmlns:sapsession="http://www.sap.com/webas/630/soap/features/session/">
<sapsession:enableSession>false</sapsession:enableSession>
</sapsession:Session>
<sapcentraladmin:CentralAdministration xmlns:sapcentraladmin="http://www.sap.com/webas/700/soap/features/CentralAdministration/" wsp:Optional="true" />
</wsp:Policy>
- <wsp:Policy wsu:Id="OP_IF_OP_HrxssPerReadEmergencyAr">
<sapcomhnd:enableCommit xmlns:sapcomhnd="http://www.sap.com/NW05/soap/features/commit/">false</sapcomhnd:enableCommit>
<sapblock:enableBlocking xmlns:sapblock="http://www.sap.com/NW05/soap/features/blocking/">true</sapblock:enableBlocking>
<saptrhnw05:required xmlns:saptrhnw05="http://www.sap.com/NW05/soap/features/transaction/">no</saptrhnw05:required>
<saprmnw05:enableWSRM xmlns:saprmnw05="http://www.sap.com/NW05/soap/features/wsrm/">false</saprmnw05:enableWSRM>
</wsp:Policy>
- <wsdl:types>
- <xsd:schema attributeFormDefault="qualified" targetNamespace="urn:sap-com:document:sap:rfc:functions">
- <xsd:simpleType name="char1">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="1" />
</xsd:restriction>
</xsd:simpleType>
"More simple types
<xsd:pattern value="\d*" />
</xsd:restriction>
</xsd:simpleType>
</xsd:schema>
- <xsd:schema attributeFormDefault="qualified" targetNamespace="urn:sap-com:document:sap:soap:functions:mc-style" xmlns:n0="urn:sap-com:document:sap:rfc:functions">
<xsd:import namespace="urn:sap-com:document:sap:rfc:functions" />
- <xsd:complexType name="Bapiret2">
- <xsd:sequence>
"More element names
- <xsd:complexType>
- <xsd:sequence>
<xsd:element name="Messages" type="tns:Bapirettab" />
<xsd:element name="Records" type="tns:HcmtBspPaArR0006Tab" />
<xsd:element name="Records2" type="tns:HcmtBspPaArR0021Tab" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
</wsdl:types>
- <wsdl:message name="HrxssPerReadEmergencyAr">
<wsdl:part name="parameters" element="tns:HrxssPerReadEmergencyAr" />
</wsdl:message>
- <wsdl:message name="HrxssPerReadEmergencyArResponse">
<wsdl:part name="parameter" element="tns:HrxssPerReadEmergencyArResponse" />
</wsdl:message>
- <wsdl:portType name="ZHR_READ_EMERGENCY">
- <wsp:Policy>
<wsp:PolicyReference URI="#IF_IF_ZHR_READ_EMERGENCY" />
</wsp:Policy>
- <wsdl:operation name="HrxssPerReadEmergencyAr">
- <wsp:Policy>
<wsp:PolicyReference URI="#OP_IF_OP_HrxssPerReadEmergencyAr" />
</wsp:Policy>
<wsdl:input message="tns:HrxssPerReadEmergencyAr" />
<wsdl:output message="tns:HrxssPerReadEmergencyArResponse" />
</wsdl:operation>
</wsdl:portType>
- <wsdl:binding name="ZHR_READ_EMERGENCY" type="tns:ZHR_READ_EMERGENCY">
- <wsp:Policy>
<wsp:PolicyReference URI="#BN_BN_ZHR_READ_EMERGENCY" />
</wsp:Policy>
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
- <wsdl:operation name="HrxssPerReadEmergencyAr">
<soap:operation soapAction="" style="document" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:service name="service">
- <wsdl:port name="ZHR_READ_EMERGENCY" binding="tns:ZHR_READ_EMERGENCY">
<soap:address location="http://cieh4-srvr.collabera.com:8000/sap/bc/srt/rfc/sap/zhr_read_emergency/900/zhr_read_emergency/zhr_read_emergency" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
Cheers,
Remi

Error while uploading excel file

Similar Messages

Maybe you are looking for