Error While Uploading GL Master Data in LSMW

Hello Experts,
I am running into error while uploading GL master data in LSMW, I created recording through FS00, then I mapped the fields, it all went good till 13th step, but last step got stuck(Run Batch Input Session), when I am running batch input session, system is showing this message "Function Code cannot be selected"
Your help would be highly appreciated.
Regards
Muhammad Yousuf Ali
SAP FI Consultant

Hi,
first can you pls check your Hierarchy mode setting in FS00 -  before executing Batch input session -
Open FS00 - go to settings - and Do not display navigation tree select radio button and save it
then Now Run fresh LSMW - your issue will resolve
Mahesh

Similar Messages

  • Getting error while uploading gl master data using LSMW batch input data

    Hi Experts,
    I am getting error while uploading the GL master data through lsmw using batch input recording.
    After completion of all steps at the time of running batch input session error i am getting is "maintain EN language discription"
    and Pls tell me is it possible to upload transactional data using lsmw? if yes pls explaing briefly.

    Hello,
    Kindly post in the FI forum to get a better response.
    Regarding the issue you might check whether the correct column is being picked up where you have maintained the description.
    Kind Regards // Shaubhik

  • Error while uploading HR master data from inQuality server

    Hi, Expert. While uploading of MAster data from Developement to Quality by BDC. When program starts for Tcode PA40, selecting Hiring Action, it is goining to the Action Screen. Here while taking the position from HR template, it gives error as Position is not in Table T428B. Payroll area on the date (Date of original hiring, of the person) it is taking DM as defalt in place of our created Area and terminating. When i am trying entering the data manually, it is giving same error for Position. I am not able to upload the data. Kindly help me by suggesting me the correct sequence and steps for uploading the data. Correct answer will be provided with STARSSSSSS **. Regds Punit.

    Have all your configurations been transported to Quality?
    Have you created the positions before initiating BDC for Hiring?
    Check Feature ABKRS in Quality. Is this same as in Development?
    Is your BDC running OK in Development?
    Regards,

  • Error in uploading TEXT master data

    I got the following error while Creating Infopackage for uploading TEXT Master data:
    Error 8 when compiling the upload program:row 431, message: A newer version of data type
    /BIC/B0000102000 was
    Can anyone let me know how to solve this issue?
    Thanks,
    Soujanya.

    Hi Soujanya,
    Check whether the row 431 is having proper data that i matching in Data type with the IO.
    Also activate the transfer rule/ Transformations if any. Then try loading the data.
    If you are trying to load the Data through the Flat File, close the *.CSV file before actually loading the data & dont open it till it is successfully loaded.
    Hope it helps!
    Regards,
    Pavan

  • Runtime error while creating material master data

    hello sir,
    i am facing one prolem while creating MATERIAL MASTER DATA.
    AFTER GIVING ALL REQUIRED INFORMATION WHEN I AM GOING TO SAVE THE DOCUMENT ITS SHOWING ABAP RUNTIME ERROR.
    MESSAGE TYPE: - MDS_KEYMAP.
    MESSAGE CLASS: 001.
    PLEASE TELL ME WHAT TO DO?
    REGARDS..

    SIR THANK YOU FOR YOUR REPLY.
    I ALREADY DONE THAT DUMP ANALYSIS.
    SO PLEASE KINDLY GIVE ME IN DETAILS ABOUT THAT SOLUTION...

  • Error while creating customer master data

    dear sir,
    i have created customer master and maintined all level general,compnay code and sales level data.and again deleted all areas thru t-code XD06.and thru se16n i have deleted the entires in kna1 knb1 knvv table
      again while creating one with same name showing error while maintaing sales level data
    Check: Table KNA1 does not exist, table KNVI does
    Message no. F2061
    plz help how do i rectify this problem and maintain the same cutomer no (external) again.
    regards,
    Debesh

    Hi,
    you did the wrong thing, don't remove the entries from standard table like KNA1, KNVV etc, SAP will maintained the entries in lot of tables same time.
    XD06 is used to set delete indicator, after wards you may create new customer master, if any problem for name you may change the name field as 'delete' for old customer.
    Now to solve your issue, i believe you need to first save the entries with maintainace of general data (KNA1) and then use XD02 to maintain the Sales area data, pl try this way it should work.
    If this way will not work, pl maintain the tax indicator in table KNVI manually to solve the issue.
    regards
    Vivek.
    Edited by: Vievk Vardhan on Dec 7, 2009 6:41 PM

  • Upload Property Master Data through LSMW

    I am using the following BAPI to upload the Property Data through LSMW.
    Business Object: BUS1502   
    Method: CREATE
    Message Type: BUS1502_CREATE
    Basic Type: BUS1502_CREATE03
    There are two issues which needs to be addressed and hope that this forum can help me out.
    1. In this BAPI, i dont see the field mapping for Company Code and Business Entity, both mandatory fields for creating a Property record.
    2. Skipping the first step, i reached the step "Start IDoc Generation" in LSMW and get the following error.
    EDI: Table passed to EDI_SEGMENTS_ADD_BLOCK is empty.
    Anyone encountered these issues? Suggestions to resolve these issues?
    Hamdan

    Hello Hamdan,
    First of all, good decision to use BAPI + LSMW it is the best way to load DATA specifically in REFX. Here's answer to your questions.
    1. Pass Company code, BE, other header level fields in E1BUS1502_CREATE structure. This is the main Header structure of the Baisc type you are using. Create source structure with these fields and mapp it to the BAPI fields and you are all set.
    2. Check the EDI_DC40 element, or other structures if you are passing values. SAP/System will fill/populate these values on its own, do not pass any values example in fields DOCNUM, CREDAT, etc.
    Good luck,
    Jag

  • XD01 assertion failed error while updating customer master data

    Hi Guys,
    This is an error when I use transaction XD01 to create customers accounts, If you have any ideas do let me and we'll try it....
    The error does not let an BDC or LSMW progress as well. There are also no recent sap notes on the same.
    The error is as follow
    ASSERTION_FAILED
    Short text
    The ASSERT condition was violated.
    What happened?
    In the running application program, the ASSERT statement recognized a
    situation that should not have occurred.
    The runtime error was triggered for one of these reasons:
    - For the checkpoint group specified with the ASSERT statement, the
    activation mode is set to "abort".
    - Via a system variant, the activation mode is globally set to "abort"
    for checkpoint groups in this system.
    - The activation mode is set to "abort" on program level.
    - The ASSERT statement is not assigned to any checkpoint group.
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    The following checkpoint group was used: "No checkpoint group specified"
    If in the ASSERT statement the addition FIELDS was used, you can find
    the content of the first 8 specified fields in the following overview:
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    I have a company code CG01 with sales organization CTS0 and I want to transfer or extend all the customer master data to another company code CG03 with the sales organization CTS0
    The things that I have tried and not work
    using xd01, fd15, fd16, fd01, does not wok and gives the error as above
    The things that I have tried and it works
    Change the sales organization from CTS0 to CTS1 I am able to post the customer master data, using any of the above tcodes and it does not give any error, however the client wants to sales organization to remain CTS0
    So please give me any ideas as per your experience as this transfer of master data has to happen by Monday, else I'll be fried by my boss
    My number is 9820029197
    Will also keep you'll posted on any developments on this case,
    Ronan Pinto

    >
    > Firstly I am from SAP FI, so totally new to SAP SD
    >
    Then you are best person to explain the reason on why the same sales organization, can't be assigned to different company codes. When a sales is done through one sales organization, then will the  profit/loss be accounted in different company codes. Is it legally allowed in the country, where your customer is doing business? How you are going to develop the  balance sheet? Again being the FI person, you are best judge to provide the details to your customer and not a SD guy.
    >
    > 1) How did the system not give an error while putting the data inside CG02 with sales organisaton same as CST0 same as in company code CG01.
    >
    I dont see any other method than removing the assignments in the backend and uploading the data. You can consult a Basis person to find the  change logs for the assignment table. In my opinion, removing the sales organization from a company code assignment just for loading a customer master data and then reassigning to original sales org is  a crooked method and/or not a professional method.
    >
    > 2) Since I have limited experience of SD, If I have to convince my client about the use of CTS1 sales organisation or a unique sales organisation against his argument that it worked for company code CG02, how should I do it.......
    >
    As explained above, how the sales will be accounted  in different company codes (even if the system allows  to assign the same sales org to different company codes)?
    I would recommend you to post this question in FI forum (after closing here) to check what are the legal implications for this scenario.
    Regards,

  • Error while deleting the Master data

    Hi Friends,
    i am getting the below error while deleting the data from a master data:-
    The system is unable to delete all of the specified master data,because some of it is still in use. (See log:Object RSDMD, sub-object MD_DEL )
    Do you want to delete the data records that are no longer in use?
    Could you guide how should i proceed to delete the data.
    Regards,
    Hirdesh

    Hi Hirdesh,
        If you are using master data in someother data targets u cant delete master data.So first you have to delete the data in data targets where this particual master data object is used, then remove the data in master data object.
    Regards
    Prasad

  • Error while loading to Master data attribute 0product

    Hi experts,
    While loading the data from 0material to 0product master data attribute i am getting a error ' 0MATERIAL : Data record 2421 (''300000072 '):Version '300000072 ' is not valid. I request u all to help me to solve this error.
    Diagnosis
        Data record 2421 & with the key '300000072 &' is invalid in value
        '300000072 &' of the attribute/characteristic 0MATERIAL &.
    System Response
        The system has recognized that the value mentioned above is invalid, and
        has processed this general error message. A subsequent message may give
        you more information on the error. This message refers to the same
        value, even though it does not state this explicitly.
    Procedure
        If this message appears during a data load, maintain the attribute in
        the PSA maintenance screens. If this message appears in the master data
        maintenance screens, leave the transaction and call it again. This
        allows you to maintain your master data.
    Please let me know what could be the problem....
    Regards,
    Prashanth
    Edited by: Prashanth Shetty on Jul 16, 2008 7:42 AM

    Hi,
       The issue is due to errorneous record.
    Delete the request in Master data and Try the following.
    1) Goto PSA --> filter the Status (Red or Green)
    Select the Red records and correct the data in which error is throwm.
    After correcting the data, save and Right click PSA and give Start update immediately.
    2) Load via Infopackage only to PSA and later update from PSA and check.
    Any one of the above 2 methods will solve the issue.
    Regards,
    Balaji V

  • Error while importing Item Master data through DTW

    Hello Expert,
      I trying to import item master data through DTW but it gives an error while importing as shown in attach file..
      Please help me...
      I am using SAP 9.0 Pl 6
    Regards,
    Sandy

    Hi Sandy,
    Kindly follow the check list
    1. Right Click DTW and run it as Administrator.
    2. Is your DTW version is same as SAP B1.
    3. Uninstall and re-install DTW.
    4. If you are using 64-bit DTW, try to use 32-bit one.
    5. Check the Template, is it of the same DTW version.
    6. Remove all the unnecessary columns.
    7. Last try different Template extension.. (e.g: CSV (Comma delimited), or Text (Tab delimited))
    Hope you find this helpful......
    Regards,
    Syed Adnan

  • Error while loading to master data infoobject hierarchy (0RPM_PORT_ITEM_HIERARCHY)

    Hi All,
    I have an issue while loading the data from psa to master data infoobject.
    DTP Error:
    When we had extracted the data from ECC to PSA, the values for field "IOBJNM" are not populated for 0RPM_PORT_ITEM_HIERARCHY
    Thus it is throwing an error while populating this data to the target.
    From where this field will fetch the values?
    Why these values are not being populated from ECC?
    Will there be any issue from BI side? can anyone help me on this.

    Hi Raman,
    yes I had extracted data in RSA3
    There are no values for the field "object".
    Do you have any idea why these values are missing?

  • Getting Duplicate data Records error while loading the Master data.

    Hi All,
    We are getting Duplicate data Records error while loading the Profit centre Master data. Master data contains time dependent attributes.
    the load is direct update. So i made it red and tried to reloaded from PSA even though it is throwing same error.
    I checked in PSA. Showing red which records have same Profit centre.
    Could any one give us any suggestions to resolve the issues please.
    Thanks & Regards,
    Raju

    Hi Raju,
            I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since  time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
    Hope this helps you.
    Thanks & Regards,
    Nithin Reddy.

  • 'Overlapping Time Intervals' error while loading the Master Data

    Guys,
              Need you help with this. I am trying to load the Master Data (attribute) for InfoObject 0FMD_FRSITM using DTP from DataSource 0FMD_FRSITM_ATTR and am getting an error 'Overlapping Time Intervals'.
    This is happening due to overlapping Valid From/Valid To date's for the same Financial Statement Item (0FMD_FRSITM) with different Editions.
    If I select the option 'Ignore Duplicate Records' while loading the data, it is successful. But not all the records are loads and Editions are missing.
    Below is an example of how the data looks like.
    FRSITM         Valid To                  Valid From                 Edition
    1001             12/31/9999             04/01/2010                2010.1.1
    1001             01/31/2010             03/01/2010                2010.1.2
    1001             12/31/9999             02/01/2010                2010.1.3
    In the above scenario, the Valid To Data for record 1 and record 3 is the same (12/31/9999) and the record 3 is being ignore when I select the option 'Ignore Duplicate Records'.
    And also I see that the Edition is not the Key Field.
    Any suggestions or ideas? Appreciate your help.
    Thanks.

    FRSITM Valid To Valid From Edition
    1001 12/31/9999 04/01/2010 2010.1.1
    1001 01/31/2010 03/01/2010 2010.1.2
    1001 12/31/9999 02/01/2010 2010.1.3
    1. While selecting ignore duplicate, make sure to-date is not part of symantic key.
    2. if system comes across two same records it picks up the latest one.
    3. It shall merge the timelines is overlap is found.
    4. I hope Edition is time dependent attribute
    I believe infoobjet key is FRSITM Valid To.
    In your case because first record has more period and may be the latets record system ignore the earlier one with the same time interval.
    have a look at Q table and you shall be able to figure out for your self.
    Hope it helps
    Vikash

  • Error while loading the master data into hierarchy

    Hi,
    When i am trying to load the master data into a hierarchy, it is showing me the following error.
    "Invalid Entry, hierarchy xxxxxx does not exist".
    Can you please tell me what might be the possible cause for this error.
    Thanks,
    Prateek

    Hello
    Have you created a hierarchy, I mean go to Transfer structure->Hierarchy structure 
    ->create hierarchy, put a check of whether it is sorted or time dependent etc. after that while loading data through infopackage just check that you have selected an appropriate hierarchy name in hierarchy selection tab.
    Hope it will help!!
    Regards,
    Sandeep

Maybe you are looking for