Error while uploading Inspection plan

Dear Friends,
I am creating inspection plans using BDC. The MIChas 2 versions. When i am using version 1, the inspection plan is created. Whereas when i am using MIC version 2 i am getting error "error occured while checking type group".Kindly let me know how do i resolve this.
Regards
Vivek

Hi,
Thanks for the reply. when i am trying to create a inspection plan in other plant, we have 4-5 sampling procesures to select from. But for this perticular plant where we are having problem, its showing only one. How do i get more options?How do i extend a sampling procedure to a new plant.
Vivek
Edited by: vivek mankad on Feb 23, 2010 7:57 AM

Similar Messages

Error while creating Inspection plan

Hi,
While creating inspection plan in QP01, system is showing error "Material type ZROH is not defined for task list type Q''
Please help me to solve the error.
Thanks
Prasant

Hi,
This is due to the configuration error,
Just use T.Code OP50
Create an entry for task list type "Q" with material type "ZROH" and save,
Then try creating a Quality Inspection Plan, it will work
Regards
Merwyn

Errors while creating Inspection plan using BAPI_INSPECTIONPLAN_CREATE

Hi All,
I am writing an upload tool for inspection plans. In this program I use bapi: BAPI_INSPECTIONPLAN_CREATE.
I made an extraction of a excisting inspection plan with SXDA_TOOLS which uses the same bapi and filled the bapi structures with the similar data. Now I am getting strange messeges in the return structure as below.
1. Material is not maintained for plant NNNN. But the material is mainained for that plant.
2. Consistency check not successful when creating operation
3. Inspection characteristic cannot be uniquely assigned to one operation
Let me know your suggestions
Thanks,
Sabu

Hi All,
Have any one used this BAPI, BAPI_INSPECTIONPLAN_CREATE to create Inspection Plan ?
Can you help me on above errors?
Thanks in advance,
Sabu

Long text problem while uploading Inspection plan through BDC.

Hi,
I am facing some problem while uploading the inspection plan. There are few MICs for which we are having long text, while uploading the inspection plan through BDC - some other long text is getting copied into the MIC's long text. After checking I came to know that in function module, read_text - some text which is stored in ABAP memory is getting copied into the inspection plan.
I am working in SAP release 4.7. I have checked with SAP notes: 97419, but it is also not satisfying.
Waiting for quick solution.
Thanks in advance.
Fahié

Hi a®s,
Thanks a lot for your kind reply.
My requirement is I want to maintain long text for few MICs (which are not having long texts at MIC level) in inspection plan (QP01).
When I am trying to manually assign the MIC's to inspection plan (QP01), long text is copied whereas I am not clicking the long text icon in (QP01). Long text is not maintained in MIC level, still some long text is copied to this MIC. This was also happening while uploading the inspection plan thro' BDC.
I believe what you have mentioned about function module SAVE_TEXT cannot be used here since long text is already copied before we pass the long text. Also if we pass some long text, still apart from the long text what we have passed there is some other long text copied (extra long text).
Waiting for quick solution.
Thanks in advance.
Fahié

Error in LSMW in Uploading Inspection Plan in QP01

Hi All,
I am facing problem when executing LSMW, I am Uploading Inspection Plan in QP01 transaction using Direct Input methos. The problem is on 13th step :Error that I get is 'No profile with entry tool for task list / / / in session INSPECTION_OBJ', here INSPECTION_OBJ is the name of the session. I have given the constant value of field profile (BIPKO-PROFIDNETZ) in mapping step and also activated check box 'entry tool' under profile to remove this error. But in that case i can pass only the header data while processing the session and control does not get into Operation and characteristic screen.
Can anyone pls help me..
Thanks in advance...

You might need to redo the recording all over again, BDC has plentty of scenario for screen selection to go wrong, so can't really tell what cause your problem based on your desc. I have been stop using BDC to uplaod material since 5 years ago, I always use Direct input in LSMW and it works much better. I recomend you try the Direct input method instead of BDC if still getting problem.

Error while uploading cost element planning data into KP06 transaction

Hi,
I am facing the below error while uploading the Cost Element Planning excel file in KP06 transaction code. Please help me in fix this issue.
We are trying to enter a budget upload using Transaction code: KP06. We get the following message errors when we do this. It seems revenue accounts cannot be entered using cost centers. Question, how should these accounts be added? Kindly help me how to add Revenue cost elements to this planning?
Error accured when generating data for the planning processor
Messange no.K9400
Revenue element 451000 can not be planned on cost center 9720
Thanks
Kishore

The cost element which have category 01 only can be planned in the Kp06.
Regards
Ranjan

Error while updating a plan

Hi,
I have encountered an error while updating a plan. While i update the uplan , the grid gets filled but it throws a message stating
"Maximum Number of Result Blocks has been reached"
Maximum number of Result Blocks has been reached.
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0xD4]
Error while processing the data for the step 'Grid'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Maximum number of Result Blocks has been reached.
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0xD4]
Error while processing the data for the step 'Grid'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Update of Plan "deposittest created 7/19/2007 5:11:50 PM" failed.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0xD5]
The data updation stops after the row count 49900.
Please help to resolve this error .
Thanks in advance.
Regards,
Lathika

Hi,
in BAM-Administrator you should rraise Parameter "MaxResultBlocks".
BAM originaly is al licensed Software from Group1 named "Sagent Data Flow".
This may help searching the web.
Greetz,
GOI

Error while uploading Template

Error while uploading Template in Internet Procurement Catalog Administrator responsibility
I downloaded "Item Price" and i had one item onto spread sheet and tried to upload in above responsibility.
This is how header level is in the template and line level has item information.
#ENCODING     Cp1252
Language Section*     EN-US
Catalog Section     Supplier*      Title
     FEDERAL INDUSTRIES     Test Catalog
***********When i looked into log file i see error message ********************
[5/20/11 7:58:13 PM] <INFO> Session language altered to AMERICAN
[5/20/11 7:58:13 PM] <INFO> Session territory altered to AMERICA
[5/20/11 7:58:13 PM] <INFO> ********** Loader started **********
[5/20/11 9:35:08 AM] <ERROR> USR:MSG:POM_CAT_MISS_LANG_SEC
[5/20/11 9:35:08 AM] <ERROR> -> Missing Language Section.
[5/20/11 9:35:08 AM] <INFO> *********************
[5/20/11 9:35:08 AM] <ERROR> Failure Message is ::
[5/20/11 9:35:08 AM] <ERROR> USR:MSG:POM_CAT_MISS_LANG_SEC
[5/20/11 9:35:08 AM] <INFO> *********************
[5/20/11 9:35:08 AM] <INFO> Job failed
[5/20/11 9:35:08 AM] <INFO> ********** Loader stopped **********
I already had language section in the template as shown above, not sure why it is giving error.
could you please let me know how to troubleshoot
Edited by: 855902 on May 20, 2011 5:02 PM

Hi,
We believe you are getting this error because of some kind of format issue in the flat file which you are loading..
You can refer below URL:
http://appswork.blogspot.com/2009/09/catalog-loader.html
/S.P DASH

Error while uploading BITMAP image in SAP through SE78.

Hello all,
I am getting below error while uploading image into SAP through SE78.
'Bitmap file: No color table available (True Color, Bitcount 32)'.
I have tried searching for solution and got some help from below reply from a thread:
You may do these options:
1. Lower the resolution of the image
2. Lower the file size of the image
Regards,
Reymar
I have got a image size of 6.14 KB and resolution of 72*72 dots per inch.
Thanks in Advance.
- Jayant Sahu.

Hi Daniel,
First of all, if you dont mind, start a new thread for your question please.
Anyways, answer to your question is --
You need to save your picture with lower-most bits BITMAP Type. When you were saving your picture as .bmp, take care you are passing lower-most BITMAP type and not 24-bit as it may be as default.
This way, your problem would be resolved.
Thanks.
Kumar Saurav.

Error while updating the plan in Enterprise link

hi
i am getting an error while updating the plan which polls the JMS topic and inserts into the grid.
IMessageSourceReceiver->messageReceive: javax.jms.JMSSecurityException: JMS-232: An invalid user/password was specified for the JMS connection
     at oracle.jms.AQjmsDBConnMgr.checkForSecurityException(AQjmsDBConnMgr.java:916)
     at oracle.jms.AQjmsDBConnMgr.getConnection(AQjmsDBConnMgr.java:601)
     at oracle.jms.AQjmsDBConnMgr.<init>(AQjmsDBConnMgr.java:238)
     at oracle.jms.AQjmsConnection.<init>(AQjmsConnection.java:183)
     at oracle.jms.AQjmsTopicConnectionFactory.createTopicConnection(AQjmsTopicConnectionFactory.java:209)
     at iteration.enterpriselink.sources.JMSConsumer.start(JMSConsumer.java:94)
     at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.jmsConsumerStart(JMSMessageSourceReceiverImpl.java:1001)
     at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.messageReceive(JMSMessageSourceReceiverImpl.java:326)
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3A]
Error during Message Receive operation.
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3B]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Update of Plan "Untitled, created 3/11/2009 3:56:28 PM" failed.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0xD5]
the username and password that i have given are valid and i have given privileges that were mentioned on the technote to the user. can somebody help me out in resolving this as this is very critical for me right now
Thanks in advance

I also get error while updating the content in workflow thru the checkout option as reviewer. i.e. contributor checks in the content - then reviewer either updates the metadata or checks out and modifies the content and while checking in the following error occurs
Content Server Request Failed
Unable to update the content item information for 'HO000128'.
The content ID must be specified.
Please help to resolve.
Thanks in advance
Prasad

Getting a Page Cannot be Displayed error while uploading a Contract Document in SAP E-sourcing for size 500mb

Hi Guys,
I am getting a Page can not be displayed error while uploading a COntract Document in SAP-E-soucing 7.0.
Maximum Size set in Our SYSTEM is :9765MB.
Approx size of the Document tried is more then 300MB.
Appreciate your help on this.
Regards
Tarun

Hi Tarun,
Please check the below system properties using system user login
attachments.maxSizeKB.buyers - "Maximum size in KB of a employer-attached attachment file"
attachments.upload.enable.buyers- " Enable/Disable uploading of attachments by internal users"
Also Please check with other attachment, contracts related properties in the System.
Let me know if this helps.
Thanks,
Raj.

Error while uploading Transport request

Hi friends,
Error while uploading transport request to the transport directory,
we downloaded the trasnport request from one sap system which have a set of developments
for example downloaded files are;
control file: K900470.SAD and Data file: R900470.SAD fronm transport directory.
we are trying to upload the transport to another Sap system
we have
Uploaded the controlling file K900470.sad to the location  /usr/sap/transpad/cofiles/
Uploaded the controlling file R900470.sad to the location  /usr/sap/transpad/data/
we tried tro add in the import queues using TCODE: STMS
and trying to import.
During import we get
error:
HALT: unknown dynpro format: d021s_length() returned 0 Please contactthe SAP support.
End with rc : 16
Please help me with the problem.
Thanks in advance
Deepak

Hi,
Check the versions of the two sap systems you are downloading and uploading the transport requests

DB Connect Load - "Unknow error while uploading data from the DB Table"

Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
Abhijit

Hi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait

Getting error while uploading a document in a library

Hi,
I'm getting a weird error while uploading the document in the library. And I don't get it all the times but most of the times.
It reads:
The file <library name>/<file name> has been modified by i:0#.<user-id> on <datetime stamp>
How to resolve this ? I have referred many articles on this one, but none helped.
Thanks for your response in advance.
Regards

Hi Prajk,
Based on your description, I recommend to check if there are any ItemAdded event receiver or workflows which are triggered when an item is created to update the document properties in the library.
If there is any ItemAdded event receiver on the library, I recommend to wait for ItemAdded to finish before the ListFieldIterator control residing on EditForm.aspx loads (It’s the ListFieldIterator which displays the Item’s fields ).
http://blogs.msdn.com/b/manuj/archive/2009/09/22/itemadded-event-on-document-library-the-file-has-been-modified-by-on-error.aspx
If there is any workflow on the library, I recommend to add a Pause for Duration step at the beginning of the workflows.
If above cannot work, please check ULS log for detailed error message.
For SharePoint 2013, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Getting an error while activating a planning area "Enter values for planning horizon From and planning horizon To for the storage time profile level"

Dear S&OP community,
I am getting following error while creating a planning ares in a newly installed sandbox. "Enter values for planning horizon From and planning horizon To for the storage time profile level".
This what I did...
1) Created new attributes and master data objects and activated them successfully.
2) Time profile created and activated successfully
3) Trying to create planing area by assigning time profile in step 2 and assigned master data from step1..Unable to save the data and system returns
this error - "Enter values for planning horizon From and planning horizon To for the storage time profile level"
My understanding is time profile needs to be active but doesn't have to have values...
Any help is appreciated.
Thanks,
Krishna

YS,
Here are my time profile settings
Level       Name          Display Horizon - Past Display Horizon - Future
1             Monthly     -6                                       11
2             Quarterly     -2                                       3
3             Yearly        -1                                       2
Time profile is active and but time profile data is not loaded
Thanks,
Krishna

Error while uploading Inspection plan

Similar Messages

Maybe you are looking for