Error while uploading maximum no of records

hi all,
i am uploading my data through a excel sheet its working fine upto 18,000 records
but when i increased the records to 20,000 its giving an error as
error during import of clip board contents
actually my file contains 39,000 records
points will be rewarded for helpful answers
Regards,
phani.

Hi anji,
i feel the same and tried 18000 ones and remaining again its working fine
one more thing now i am not getting the same error now i tried 20000 ones remaining ones now its not giving any error but when i give 39000 records at a
time it gives a short dump due to time exceeds
i think i have to run it through background do you say any option than this?
points will be rewarded for helpful answers
Regards,
Phani.

Similar Messages

Getting a Page Cannot be Displayed error while uploading a Contract Document in SAP E-sourcing for size 500mb

Hi Guys,
I am getting a Page can not be displayed error while uploading a COntract Document in SAP-E-soucing 7.0.
Maximum Size set in Our SYSTEM is :9765MB.
Approx size of the Document tried is more then 300MB.
Appreciate your help on this.
Regards
Tarun

Hi Tarun,
Please check the below system properties using system user login
attachments.maxSizeKB.buyers - "Maximum size in KB of a employer-attached attachment file"
attachments.upload.enable.buyers- " Enable/Disable uploading of attachments by internal users"
Also Please check with other attachment, contracts related properties in the System.
Let me know if this helps.
Thanks,
Raj.

Error while uploading Bank Statement in FF.5

Hello all
I am getting the following error while uploading the Bank Statement file in FF.5-
Termination in statement no. 00000 of acct ; closing record 62F missing
The file format is MT940.
Can somebody throw some light on this message if any1 has encountered this.
Thanks in advance
Hrishikesh

Hi,
The error itself is telling u that the closing balance in the bank statement is missing. Check the MT940 format statement in that check whether field 62F is present or not. If that line is missing then system cant understand the format.
regards
srikanth.

Error While Uploading GL Master Data in LSMW

Hello Experts,
I am running into error while uploading GL master data in LSMW, I created recording through FS00, then I mapped the fields, it all went good till 13th step, but last step got stuck(Run Batch Input Session), when I am running batch input session, system is showing this message "Function Code cannot be selected"
Your help would be highly appreciated.
Regards
Muhammad Yousuf Ali
SAP FI Consultant

Hi,
first can you pls check your Hierarchy mode setting in FS00 - before executing Batch input session -
Open FS00 - go to settings - and Do not display navigation tree select radio button and save it
then Now Run fresh LSMW - your issue will resolve
Mahesh

Error while Uploading Query thu SQ02

Dear all,
We got an error while uploading a query thu SQ02. May I know do you have any idea for about, thank you very much!
Error in code for record processing
The "FROM" addition is missing. The FROM or the FROM addition at either
DELETE, INSERT, MODIFY, or UPDATE is missing. addition at either DELETE, INSERT, MODIFY,
Best regards,
Anne

Hi,
This is just a syntax error in the code you have written in your query.
kindly paste the code so that i can have a look at it or try refering to the syntax of the statement you have coded .
Regards,
Raghavendra

Getting error while uploading gl master data using LSMW batch input data

Hi Experts,
I am getting error while uploading the GL master data through lsmw using batch input recording.
After completion of all steps at the time of running batch input session error i am getting is "maintain EN language discription"
and Pls tell me is it possible to upload transactional data using lsmw? if yes pls explaing briefly.

Hello,
Kindly post in the FI forum to get a better response.
Regarding the issue you might check whether the correct column is being picked up where you have maintained the description.
Kind Regards // Shaubhik

Error while uploading Template

Error while uploading Template in Internet Procurement Catalog Administrator responsibility
I downloaded "Item Price" and i had one item onto spread sheet and tried to upload in above responsibility.
This is how header level is in the template and line level has item information.
#ENCODING     Cp1252
Language Section*     EN-US
Catalog Section     Supplier*      Title
     FEDERAL INDUSTRIES     Test Catalog
***********When i looked into log file i see error message ********************
[5/20/11 7:58:13 PM] <INFO> Session language altered to AMERICAN
[5/20/11 7:58:13 PM] <INFO> Session territory altered to AMERICA
[5/20/11 7:58:13 PM] <INFO> ********** Loader started **********
[5/20/11 9:35:08 AM] <ERROR> USR:MSG:POM_CAT_MISS_LANG_SEC
[5/20/11 9:35:08 AM] <ERROR> -> Missing Language Section.
[5/20/11 9:35:08 AM] <INFO> *********************
[5/20/11 9:35:08 AM] <ERROR> Failure Message is ::
[5/20/11 9:35:08 AM] <ERROR> USR:MSG:POM_CAT_MISS_LANG_SEC
[5/20/11 9:35:08 AM] <INFO> *********************
[5/20/11 9:35:08 AM] <INFO> Job failed
[5/20/11 9:35:08 AM] <INFO> ********** Loader stopped **********
I already had language section in the template as shown above, not sure why it is giving error.
could you please let me know how to troubleshoot
Edited by: 855902 on May 20, 2011 5:02 PM

Hi,
We believe you are getting this error because of some kind of format issue in the flat file which you are loading..
You can refer below URL:
http://appswork.blogspot.com/2009/09/catalog-loader.html
/S.P DASH

Error while uploading BITMAP image in SAP through SE78.

Hello all,
I am getting below error while uploading image into SAP through SE78.
'Bitmap file: No color table available (True Color, Bitcount 32)'.
I have tried searching for solution and got some help from below reply from a thread:
You may do these options:
1. Lower the resolution of the image
2. Lower the file size of the image
Regards,
Reymar
I have got a image size of 6.14 KB and resolution of 72*72 dots per inch.
Thanks in Advance.
- Jayant Sahu.

Hi Daniel,
First of all, if you dont mind, start a new thread for your question please.
Anyways, answer to your question is --
You need to save your picture with lower-most bits BITMAP Type. When you were saving your picture as .bmp, take care you are passing lower-most BITMAP type and not 24-bit as it may be as default.
This way, your problem would be resolved.
Thanks.
Kumar Saurav.

Error while uploading Transport request

Hi friends,
Error while uploading transport request to the transport directory,
we downloaded the trasnport request from one sap system which have a set of developments
for example downloaded files are;
control file: K900470.SAD and Data file: R900470.SAD fronm transport directory.
we are trying to upload the transport to another Sap system
we have
Uploaded the controlling file K900470.sad to the location  /usr/sap/transpad/cofiles/
Uploaded the controlling file R900470.sad to the location  /usr/sap/transpad/data/
we tried tro add in the import queues using TCODE: STMS
and trying to import.
During import we get
error:
HALT: unknown dynpro format: d021s_length() returned 0 Please contactthe SAP support.
End with rc : 16
Please help me with the problem.
Thanks in advance
Deepak

Hi,
Check the versions of the two sap systems you are downloading and uploading the transport requests

DB Connect Load - "Unknow error while uploading data from the DB Table"

Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
Abhijit

Hi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait

Getting error while uploading a document in a library

Hi,
I'm getting a weird error while uploading the document in the library. And I don't get it all the times but most of the times.
It reads:
The file <library name>/<file name> has been modified by i:0#.<user-id> on <datetime stamp>
How to resolve this ? I have referred many articles on this one, but none helped.
Thanks for your response in advance.
Regards

Hi Prajk,
Based on your description, I recommend to check if there are any ItemAdded event receiver or workflows which are triggered when an item is created to update the document properties in the library.
If there is any ItemAdded event receiver on the library, I recommend to wait for ItemAdded to finish before the ListFieldIterator control residing on EditForm.aspx loads (It’s the ListFieldIterator which displays the Item’s fields ).
http://blogs.msdn.com/b/manuj/archive/2009/09/22/itemadded-event-on-document-library-the-file-has-been-modified-by-on-error.aspx
If there is any workflow on the library, I recommend to add a Pause for Duration step at the beginning of the workflows.
If above cannot work, please check ULS log for detailed error message.
For SharePoint 2013, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Error while uploading text file....

Halo Friends,
I am uploading 4 text files which contain three columns separated by a tab, but when i am trying to upload those files using WS_UPLOAD Function Module i am getting a runtime error saying 'error while uploading/downloading'.
Please solve this problem as soon as possible.
Thanks in Advance,
rama

Halo again,
Now that i am able to upload the files, i need to update the database table the update statement is executing correctly but when i debug i see that the sy-subrc value is 4 but not 0.
and hence the it is not committed.
Any suggestions. i am pasting my code here for your reference:
Tables: qmfe.
data: begin of gt1_qmfe occurs 0,
      qmnum       like qmfe-qmnum,
      fenum       like qmfe-fenum,
      /itml/usr20 like qmfe-/itml/usr20,
      end of gt1_qmfe.
data: begin of gt2_qmfe occurs 0,
      qmnum       like qmfe-qmnum,
      fenum       like qmfe-fenum,
      /itml/usr21 like qmfe-/itml/usr21,
      end of gt2_qmfe.
data: begin of gt3_qmfe occurs 0,
      qmnum       like qmfe-qmnum,
      fenum       like qmfe-fenum,
      /itml/usr19 like qmfe-/itml/usr19,
      end of gt3_qmfe.
data: begin of gt4_qmfe occurs 0,
      qmnum       like qmfe-qmnum,
      fenum       like qmfe-fenum,
      /itml/usr07 like qmfe-/itml/usr07,
      end of gt4_qmfe.
data: gs1_qmfe like line of gt1_qmfe,
      gs2_qmfe like line of gt2_qmfe,
      gs3_qmfe like line of gt3_qmfe,
      gs4_qmfe like line of gt4_qmfe.
data: ls_lines1 type i,
      ls_lines2 type i,
      ls_lines3 type i,
      ls_lines4 type i.
parameters: ip_file1 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\StoDt.txt'     obligatory,
            ip_file2 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\RcDtCust.txt' obligatory,
            ip_file3 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\DockDate.txt' obligatory,
            ip_file4 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\AWB.txt'       obligatory.
field-symbols: <fs1> like gs1_qmfe,
               <fs2> like gs2_qmfe,
               <fs3> like gs3_qmfe,
               <fs4> like gs4_qmfe.
perform upload_gt1_qmfe.
perform upload_gt2_qmfe.
perform upload_gt3_qmfe.
perform upload_gt4_qmfe.
perform update_qmfe.
*&      Form upload_gt1_qmfe
      text
--> p1        text
<-- p2        text
FORM upload_gt1_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
   FILENAME                      = ip_file1
   FILETYPE                      = 'DAT'
TABLES
    DATA_TAB                      = gt1_qmfe.
describe table gt1_qmfe lines ls_lines1.
write: / ls_lines1.
ENDFORM.                    " upload_gt1_qmfe
*&      Form upload_gt2_qmfe
      text
--> p1        text
<-- p2        text
FORM upload_gt2_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
   FILENAME                      = ip_file2
   FILETYPE                      = 'DAT'
TABLES
    DATA_TAB                      = gt2_qmfe.
describe table gt2_qmfe lines ls_lines2.
write: / ls_lines2.
ENDFORM.                    " upload_gt2_qmfe
*&      Form upload_gt3_qmfe
      text
--> p1        text
<-- p2        text
FORM upload_gt3_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
   FILENAME                      = ip_file3
   FILETYPE                      = 'DAT'
TABLES
    DATA_TAB                      = gt3_qmfe.
describe table gt3_qmfe lines ls_lines3.
write: / ls_lines3.
ENDFORM.                    " upload_gt3_qmfe
*&      Form upload_gt4_qmfe
      text
--> p1        text
<-- p2        text
FORM upload_gt4_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
   FILENAME                      = ip_file4
   FILETYPE                      = 'DAT'
TABLES
    DATA_TAB                      = gt4_qmfe.
describe table gt4_qmfe lines ls_lines4.
write: / ls_lines4.
ENDFORM.                    " upload_gt4_qmfe
*&      Form update_qmfe
      text
--> p1        text
<-- p2        text
FORM update_qmfe .
data ls_cnt type i.
loop at gt1_qmfe assigning <fs1>.
update qmfe set    /itml/usr20 = <fs1>-/itml/usr20
            where qmnum       = <fs1>-qmnum
            and    fenum       = <fs1>-fenum.
if sy-subrc = 0.
commit work.
add 1 to ls_cnt.
endif.
endloop.
write: / ls_cnt.
ENDFORM.                    " update_qmfe

Error while uploading SSRS Reports to SharePoint Report Library

Dear All,
I am having a SSRS Server running in SharePoint integrated mode and I am running reports in SharePoint successfully, but I am facing issue with one site as shown below.
I am getting below error while uploading a report to specific path as shown below;
I can upload to any link but not for the below link shows /departments/ocean
I checked my ReportServer paths from RS Configuration Manager and I cannot find that defined path there. But I can see all other links are registered()
Note: Below shows my web applications in SharePoint farm(four web sites). I have define paths(site collections) only in default web application, not in other webs which has a port number.
I am not sure how the RS Configuration Manager picks thoae Define Manage Path in site collections.
But I think, it should pick department site collections as well.
Could you please guide me how to rectify above error?
ASP.Net, C#.Net, SQL Server ,Win32

Hi,
I recommend to check you can connect to the site collection in Report Builder.
If not, please check if you have permission to access the site collection.
Please also check if the Report Server Integration Feature is activated in the site collection.
To narrow the issue scope, I recommend to create a new site collection using the departments path in SharePoint to see if the issue still occurs.
As a workaround, you can also save the report to local drive and then upload it to SharePoint library using Upload Document button in the ribbon in SharePoint library.
In the meanwhile, you can post your question to the forum for SSRS: http://social.technet.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices.
More experts will assist you, then you will get more information relation to SSRS.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Error while uploading cost element planning data into KP06 transaction

Hi,
I am facing the below error while uploading the Cost Element Planning excel file in KP06 transaction code. Please help me in fix this issue.
We are trying to enter a budget upload using Transaction code: KP06. We get the following message errors when we do this. It seems revenue accounts cannot be entered using cost centers. Question, how should these accounts be added? Kindly help me how to add Revenue cost elements to this planning?
Error accured when generating data for the planning processor
Messange no.K9400
Revenue element 451000 can not be planned on cost center 9720
Thanks
Kishore

The cost element which have category 01 only can be planned in the Kp06.
Regards
Ranjan

Error While uploading the Function and Function_BP

Hello,
I am getting the following error while uploading the Functions and Funtions_BP using the Rule Upload functions.
com.virsa.cc.comp.Function_upload.onActionUploadFunc(Function_upload.java:302) com.virsa.cc.comp.wdp.InternalFunction_upload.wdInvokeEventHandler(InternalFunction_upload.java:150) com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420) com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132) com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335) com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143) com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321) com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713) com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666) com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250) com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149) com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62) com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53) javax.servlet.http.HttpServlet.service(HttpServlet.java:760) javax.servlet.http.HttpServlet.service(HttpServlet.java:853) com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386) com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364) com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039) com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265) com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) java.security.AccessController.doPrivileged(Native Method) com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104) com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
The files which i am uploading the file from the Best practises only.
What is the reason for this error?
Did any one get this error?
Regards,
Kumar Rayudu
Edited by: Kumar Rayudu on Aug 4, 2009 12:32 PM

Hello Kumar,
Have you uploaded the SAP text and object files? Upload them first and then try to upload functions.
Harleen
SAP GRC RIG

Error while uploading maximum no of records

Similar Messages

Maybe you are looking for