Error while uploading Product master with LSMW Idoc method using XIF
Hi Madhura,
Please check it out the length of material field and maintain the guid for the product , check it out the atatus maintained to maintain the product i.e insert(I) or Update(U).
Regards,
Naveen
Edited by: Naveen Kumar on Jul 7, 2009 4:35 PM
Hello,
I could identify the error. It was due to incorrect UOM. Problem resolved.
Thanks,
Madhura
Similar Messages
-
Error While Uploading GL Master Data in LSMW
Hello Experts,
I am running into error while uploading GL master data in LSMW, I created recording through FS00, then I mapped the fields, it all went good till 13th step, but last step got stuck(Run Batch Input Session), when I am running batch input session, system is showing this message "Function Code cannot be selected"
Your help would be highly appreciated.
Regards
Muhammad Yousuf Ali
SAP FI ConsultantHi,
first can you pls check your Hierarchy mode setting in FS00 - before executing Batch input session -
Open FS00 - go to settings - and Do not display navigation tree select radio button and save it
then Now Run fresh LSMW - your issue will resolve
Mahesh -
Getting error while uploading gl master data using LSMW batch input data
Hi Experts,
I am getting error while uploading the GL master data through lsmw using batch input recording.
After completion of all steps at the time of running batch input session error i am getting is "maintain EN language discription"
and Pls tell me is it possible to upload transactional data using lsmw? if yes pls explaing briefly.Hello,
Kindly post in the FI forum to get a better response.
Regarding the issue you might check whether the correct column is being picked up where you have maintained the description.
Kind Regards // Shaubhik -
Error while uploading HR master data from inQuality server
Hi, Expert. While uploading of MAster data from Developement to Quality by BDC. When program starts for Tcode PA40, selecting Hiring Action, it is goining to the Action Screen. Here while taking the position from HR template, it gives error as Position is not in Table T428B. Payroll area on the date (Date of original hiring, of the person) it is taking DM as defalt in place of our created Area and terminating. When i am trying entering the data manually, it is giving same error for Position. I am not able to upload the data. Kindly help me by suggesting me the correct sequence and steps for uploading the data. Correct answer will be provided with STARSSSSSS **. Regds Punit.
Have all your configurations been transported to Quality?
Have you created the positions before initiating BDC for Hiring?
Check Feature ABKRS in Quality. Is this same as in Development?
Is your BDC running OK in Development?
Regards, -
Error with LSMW IDOC method while maintaining Quota arrangement
Hi
I am trying to create LSMW using IDOC method for maintaining quota Arrangment.
I used the standard Message type LPIEQU. Idoc is getting generated and when i tried to process this IDOC i am getting error "Function module not allowed: BAPI_IDOC_INPUT1".
I used the process code as "BAPI" in message type LPIEQU configuration in WE20.
If anyone faced this issue please let me know the reason for the error.
sakthi.Ksee OSS Note 198252 - Special features of POI message category LOI*
The message categories named are part of the POI (Production Optimization interface) interface.This interface and the message categories contained in it were developed for the transfer to non-R/3 systems.Therefore, an inbound processing in the R/3 system is not planned. -
ABAP dump error while updating product master in APO
Hi All,
Greetings from Vijay!
I need to your help to resolve below issue ;
I am getting error '
No simulation parameters could be set for the
active version'
While i am updating and trying to assign active version to my product master in APO which are created in APO for regression testing
and also sometimes system throwing dump error'
Error in the ABAP Application Program
The current ABAP program "/SAPAPO/SAPLDM_LC_SQL" had to be terminated because
it has
come across a statement that unfortunately cannot be executed.;
I appreciate your help
Thanks
Vijay JobHi Vijay,
Can you check note 1465462 ?
The same problem is mentioned in the note with correction .
Regards,
Mukesh pandey -
Upload Customer Master with LSMW
Hi Experts,
I have created an LSMW for uploading Customer Master in Development System and moved it to Quality System.
Now can I upload the Customer Master in Production System from the LSMW in Quality System or it is the only option that I will have to move the LSMW to Production System and then Upload the Customer Master form Production?
Thanks in Advance.
Quick reply would be appriciated.
Regards,
HPI close the thread. I got the solution.
It is possible with the Menu Path
Extras > Export/Import -
Getting error while uploading Product Foundation Selection Set
Hi,
While uploading the extract of Product Foundation selection set, I am getting the error in the Code Combinations API.
The error is :
An unexpected error has occurred. Please inform your system administrator that the error: ORA-12899: value too large for column "GL"."GL_CODE_COMBINATIONS"."DETAIL_POSTING_ALLOWED_FLAG" (actual: 3, maximum: 1) occurred when the FND_FLEX_SERVER package tried to execute the SQL statement below.
If tables or sequences do not exist this may indicate a problem with your installation. Make sure grants and synonyms exist so that all tables, views, and sequences in the SQL statement are visible from the database account in which the FND_FLEX_SERVER package resides (usually APPLSYS).
If this is a select statement and the last portion of the where clause is in incorrect, then an invalid where clause may have been supplied in the flexfield definition. The error is probably either in the form, or in a server-side package that calls the flexfield validation routine.
SQL statement (first 1000 bytes):
insert into GL_CODE_COMBINATIONS (CODE_COMBINATION_ID, CHART_OF_ACCOUNTS_ID, ENABLED_FLAG, SUMMARY_FLAG, START_DATE_ACTIVE, END_DATE_ACTIVE, LAST_UPDATE_DATE, LAST_UPDATED_BY, DETAIL_BUDGETING_ALLOWED_FLAG, DETAIL_POSTING_ALLOWED_FLAG, ACCOUNT_TYPE, REFERENCE3, JGZZ_RECON_FLAG, SEGMENT1, SEGMENT2, SEGMENT3, SEGMENT4, SEGMENT5, SEGMENT6) values (:FND_BIND1,:FND_BIND2,:FND_BIND3,:FND_BIND4,:FND_BIND5,:FND_BIND6,sysdate,:FND_BIND7,:FND_BIND8,:FND_BIND9,:FND_BIND10,:FND_BIND11,:FND_BIND12,:FND_BIND13,:FND_BIND14,:FND_BIND15,:FND_BIND16,:FND_BIND17,:FND_BIND18)
The value of Detail Posting Allowed Flag = 'Y' only. I am afraid if API is counting quotes (') as a separate character. And if this is the case, then do we have any patch for the same?Hi,
We are on 12.1.1 version and we are in the process to download below mentioned patches.
1) 8602263 -- Generic Platform (American English)
2) 8652905 -- Generic Platform (American English)
3) 8661732 -- Generic Platform (American English)
4) 8599456 -- Linux x86 (American English)
But while downloading we are facing some issues. Once we find the patch from Support.oracle.com and click on download, it is displaying a page with error. Still we are trying to find out if there is something wrong with our network connection. In the meanwhile, if possible, request you to check if the Download is working fine at your end from Support.oracle.com
And as we dont have privilage to raise an SR, I am not able to download the 5th patch related to GL.
Appreciate your help ("as always") as I have completed the entire Selection, Extraction and Transformation part and now waiting to Load Product Foudnation Extract so that Ledger will start appearing in the system.
With Regards,
Vishal majithia -
Errors while loading Product master via HCI
Hello Experts,
We have been facing some issue while loading the product master via the HCI. Here is the reason taken from the log file:
REJECTION_CODE
REJECTION_CODE_NAME
REJECTION_DESCRIPTION
140
Inappropriate use of special character
Special characters are not allowed
We took the same records and loaded through the flat file and they were successful and can be seen in excel ui
We also checked for any inappropriate characters which are not allowed but we couldn't find any.
How should we load the data via the HCI with no errors?
Any help would be highly appreciated.
Thanks
KaranYS
We are also just getting the same error message as Karan. This issue, for Kraft, just started this week. We looked at the SAP note that you poated and it does not help as it tells us to add code to remove special characters. There are none in the source table in ECC.
The issue is that we have made no changes and this error has started to hit us.
We upgraded to Patch 7 of the HCI Agent this pas weekend. Is that a possible driver of this issue?
-Jeff -
Hello there,
I am facing an issue while creating a LSMW using IDOC method. I am creating it for PROFIT CENTER upload. My file is having the data as, there can be multiple company codes for one profit center, so my file will have more than one record for single profit center. I have to create only one IDOC per profit center, so I have to create multiple segments in that IDOC for different company codes.
I am not sure how to create multiple segments using LSMW. It will be very helpful, if anyone can tell me how to do it.
Thanks,
Ganesh KhumseHello Ganesh,
I assume that you are using the IDoc Type PRCMAS02 for the creation of Profit Centers along with Company Code assignment.
In order to be able to extend the Profit Center for Multiple Company Codes, please segregate the source structures into Profit center general data and company code data...along with respective source fields.
In the structure relations, assign the Profit Center General data to the Idoc segments E1KEPCM & E1KEPCT. Then assign the Company Code data to the segment E1KEPCB.
The input file layout expected will be something similar to the below layout...
PCHEAD1
- CCODE1
- CCODE2
PCHEAD2
- CCODE1
- CCODE2
Hope this info resolves your problem.
Pls reward if this answers your query.
With Regards
Vijay Gajavalli -
Error While Uploading Material Master Through Bdc Call Transaction
Hi Sap Gurus,
I am doing Bdc call Transaction for Material Master Uploading.
But After Entering data for 4-5 screen i got a error_
Field Mara-iprkz doesn,t exit in the screen saplmgmm 4000
Field Mara-prctr doesn,t exit in the screen saplmgmm 4000
Field Mbew-stprs doesn,t exit in the screen saplmgmm 4000
Field Marc-mtvfe doesn,t exit in the screen saplmgmm 4000
Enter Valuation class.
This is my Programme....................................
<removed by moderator>
Thanks in advance.
Arindam
Moderator message: please post only relevant code parts, your post must be less than 5000 characters to preserve formatting.
Edited by: Thomas Zloch on Apr 16, 2011 9:29 PMSorry for my obvious answer, but you should ask a more precise question.
Your errors are that you try to enter fields but they don't exist, so it sounds logic.
And the error "Enter Valuation class." means that the field is mandatory. So you must enter it.
Re-record the transaction using SHDB (eventually play with the http://wiki.sdn.sap.com/wiki/display/ABAP/Recordduringplay), run it in A display mode, and correct your program.
Sandra
perform bdc_dynpro using 'SAPLMGMM' '4000'.
perform bdc_field using 'MVKE-SKTOF'
'X'.
perform bdc_dynpro using 'SAPLMGMM' '4000'.
perform bdc_field using 'MARC-PRCTR'
wa_mara-prctr."'MUMBAI'.
perform bdc_dynpro using 'SAPLMGMM' '4000'.
perform bdc_field using 'MARA-IPRKZ'
'D'. -
Error while uploading tariff codes with transaction /sapsll/llns_upl101
Hi all,
I try to upload tariff codes provided from the Bundesanzeiger Verlag, the codes are stored in an xml format. The mapping from the xml file into the GTS structure works fine. The error occurs while I try to save the data. During the save progress I get the runtime error SAPSQL_ARRAY_INSERT_DUPREC, which indicates that the tariff codes I want to upload already exist.
Am I missing any step? Do I first have to delete the old tariff codes from 2010?
Thanks for your help.
Best regards,
Clemens
Edit: We are using SAP GTS 8.0
Resolved:
Oss note 1457745 resolved my problem.
Edited by: Clemens Stukenbrock on Mar 21, 2011 6:08 PMOss note 1457745 resolved my problem-
-
DTW error while uploading UDO master
Dear All,
When am trying to upload a UDO master through DTW, it is giving me an Unknown error 1005! 65171.wat could be the reason for it.
Regards,
Shyam sundar.ADear Shyam,
All 65171 errors are related to data format mismatch. You need to try by only few columns first and add one column at a time to test.
Thanks,
Gordon -
Error while loading customer master data through Idoc (DEBMAS) from BODS
Hi All,
I am trying to load customer master data from BODS to SAP ECC through IDOC(DEBMAS). The jobs run successfully but IDOC is not getting posted. Please find the error below.
I checked in TSKD table the entry 0 is present. Please help me to resolve this issue.
Thanks & Regards,
Balamurugan GHi, did you referred this link : Error during customer master mass update through XD99
-
Error while uploading EBS (MT940) with FF_5
Hi Experts,
I have maintained below configuration for EBS:
Account symbol creation.
Account determination for account Symbol.
Posting rules creation.
Assigned the Account symbols to posting rules.
Transaction type.
Assigned external transaction type to transaction.
Assigned to bank account to transaction type.
I tried to upload the EBS using FF_5 but getting below Error:
USD 10000,00MIT is not a valid amount
Message no. FV117
I am using below file (notepad) to upload:
:20:20140617
:25:2005928
:28C:01
:60F:C140617USD0,00
:61:1406170617C10000,00 MITS3000000//
:86:testing
:62F:c140617USD10000,00
Please give your expert advice:
Thanks & Regards,
Sudhir HaraleHi Atul,
Thanks for reply.
I checked in SU03 and decimal setting is correct.
In the meantime, I assigned the GL account's to account symbol (standard Symbols - BANK and GELDEINGANG) and assigned the same in posting rule 0001, assigned the posting rule to exiting standard transaction type (FCHI). I tried to upload the file and observed that “Cheque In” transaction is created and got cleared.
But as per requirement I have to create new posting rule and external transaction types.
Request your help in the above issue.
Thanks in advance.
Regards,
Sudhir Harale
Maybe you are looking for
-
WMEncoder not working in windows 7
hi I am trying to record all my activity in video using c# project. For That by serfing I found WMEncoder. for that I also install necessary tool.I am using Windows 7 operatiing system. But When I try to create object using WMEncoder encoder= ne
-
MacBook Pro dropping bluetooth connection with HP Officejet 100
I've recently started developing problems with my MacBook Pro (OS X 10.7.4) maintaining a bluetooth connection with my HP Officejet 100 Mobile Printer. The problem I'm seeing is that when I send something to the printer, everything starts out okay, b
-
IPod touch 4G randomly deleted music and won't sync?
So my white iPod touch 4G was plugged up to my computer to charge like always. When I went to listen to my music it said there is "no content, please purchase...". Now the majority of my music is downloaded straight from itunes but there are son
-
Iphone is blocked and cant use other sim card???
-
My phone is stating that it cannot back up because there is not enough iCloud storage available. What can I delete or do to make more storage?