Error while uploading Sales View

We have a problem while uploading sales view in the Material master.System is giving following error
1. 'Error while updating the classification data'.
2.Error inserting in table MARC
Can anyone suggest a solution pl...
With Rgds.,
Rakesh Kumar
09324847499

Friend
During material creation have you extended classification view?
If yes Have you created class using Cl01 transaction and then giving that class name in classification view?
ENJOY SAP
Regards

Similar Messages

Error while uploading images to SAP Mobile Documents from iPad application using ObjectiveCMIS.

Hi,
I am getting the error while uploading images to SAP Mobile Documents from custom iOS(iPad )application using ObjectiveCMIS library.
My Custom method is as follows:
- (void)createSalesOrderRouteMapImageInFolder:(NSString*)salesOrderRouteMapFolderId routeMapImageTitle:(NSString *)imageTitle routeMapContent:(NSData *)imageData
    NSInputStream *inputStream = [NSInputStream inputStreamWithData:imageData];
    NSMutableDictionary *properties = [NSMutableDictionary dictionary];
    [properties setObject:[NSString stringByAppendingFileExtension:imageTitle] forKey:@"cmis:name"];
    [properties setObject:@"cmis:document" forKey:@"cmis:objectTypeId"];
    [self.session createDocumentFromInputStream:inputStream
                                       mimeType:@"image/png"
                                     properties:properties
                                       inFolder:salesOrderRouteMapFolderId
                                  bytesExpected:[imageData length]
                                completionBlock:^(NSString *objectId, NSError *error) {
                                    NSLog(@"Object id is %@",objectId);
                                    if(error == nil) {
                                        [inputStream close];
                                        NSLog(@"Uploading Sales order route map successfully.");
                                        [[NSNotificationCenter defaultCenter] postNotificationName:SaveOrderSuccessNotification object:nil];
                                    } else {
                                        [inputStream close];
                                        NSLog(@"Uploading sales order route map failed.");
                                        [[NSNotificationCenter defaultCenter] postNotificationName:SaveOrderFailedNotification object:error];
                                } progressBlock:^(unsigned long long bytesUploaded, unsigned long long bytesTotal) {
                                    NSLog(@"uploading... (%llu/%llu)", bytesUploaded, bytesTotal);
OBjectiveCMIS Method in which i am getting error during upload:
- (void)sendAtomEntryXmlToLink:(NSString *)link
             httpRequestMethod:(CMISHttpRequestMethod)httpRequestMethod
                    properties:(CMISProperties *)properties
            contentInputStream:(NSInputStream *)contentInputStream
               contentMimeType:(NSString *)contentMimeType
                 bytesExpected:(unsigned long long)bytesExpected
                   cmisRequest:(CMISRequest*)request
               completionBlock:(void (^)(CMISObjectData *objectData, NSError *error))completionBlock
                 progressBlock:(void (^)(unsigned long long bytesUploaded, unsigned long long bytesTotal))progressBlock
    // Validate param
    if (link == nil) {
        CMISLogError(@"Must provide link to send atom entry");
        if (completionBlock) {
            completionBlock(nil, [CMISErrors createCMISErrorWithCode:kCMISErrorCodeInvalidArgument detailedDescription:nil]);
        return;
    // generate start and end XML
    CMISAtomEntryWriter *writer = [[CMISAtomEntryWriter alloc] init];
    writer.cmisProperties = properties;
    writer.mimeType = contentMimeType;
    NSString *xmlStart = [writer xmlStartElement];
    NSString *xmlContentStart = [writer xmlContentStartElement];
    NSString *start = [NSString stringWithFormat:@"%@%@", xmlStart, xmlContentStart];
    NSData *startData = [NSMutableData dataWithData:[start dataUsingEncoding:NSUTF8StringEncoding]];
    NSString *xmlContentEnd = [writer xmlContentEndElement];
    NSString *xmlProperties = [writer xmlPropertiesElements];
    NSString *end = [NSString stringWithFormat:@"%@%@", xmlContentEnd, xmlProperties];
    NSData *endData = [end dataUsingEncoding:NSUTF8StringEncoding];
    // The underlying CMISHttpUploadRequest object generates the atom entry. The base64 encoded content is generated on
    // the fly to support very large files.
    [self.bindingSession.networkProvider invoke:[NSURL URLWithString:link]
                                     httpMethod:httpRequestMethod
                                        session:self.bindingSession
                                    inputStream:contentInputStream
                                        headers:[NSDictionary dictionaryWithObject:kCMISMediaTypeEntry forKey:@"Content-type"]
                                  bytesExpected:bytesExpected
                                    cmisRequest:request
                                      startData:startData
                                        endData:endData
                              useBase64Encoding:YES
                                completionBlock:^(CMISHttpResponse *response, NSError *error) {
                                    if (error) {
                                        CMISLogError(@"HTTP error when sending atom entry: %@", error.userInfo.description);
                                        if (completionBlock) {
                                            completionBlock(nil, error);
                                    } else if (response.statusCode == 200 || response.statusCode == 201 || response.statusCode == 204) {
                                        if (completionBlock) {
                                            NSError *parseError = nil;
                                            CMISAtomEntryParser *atomEntryParser = [[CMISAtomEntryParser alloc] initWithData:response.data];
                                            [atomEntryParser parseAndReturnError:&parseError];
                                            if (parseError == nil) {
                                                completionBlock(atomEntryParser.objectData, nil);
                                            } else {
                                                CMISLogError(@"Error while parsing response: %@", [parseError description]);
                                                completionBlock(nil, [CMISErrors cmisError:parseError cmisErrorCode:kCMISErrorCodeRuntime]);
                                    } else {
                                        CMISLogError(@"Invalid http response status code when sending atom entry: %d", (int)response.statusCode);
                                        CMISLogError(@"Error content: %@", [[NSString alloc] initWithData:response.data encoding:NSUTF8StringEncoding]);
                                        if (completionBlock) {
                                            completionBlock(nil, [CMISErrors createCMISErrorWithCode:kCMISErrorCodeRuntime
                                                                                 detailedDescription:[NSString stringWithFormat:@"Failed to send atom entry: http status code %li", (long)response.statusCode]]);
                                  progressBlock:progressBlock];
Attaching the logs:
ERROR [CMISAtomPubBaseService sendAtomEntryXmlToLink:httpRequestMethod:properties:contentInputStream:contentMimeType:bytesExpected:cmisRequest:completionBlock:progressBlock:] HTTP error when sending atom entry: Error Domain=org.apache.chemistry.objectivecmis Code=260 "Runtime Error" UserInfo=0x156acfa0 {NSLocalizedDescription=Runtime Error, NSLocalizedFailureReason=ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public void com.sap.mcm.server.service.AbstractChangeLogService.updateChangeLog(java.lang.String,boolean) throws com.sap.mcm.server.api.exception.MCMException method on bean instance com.sap.mcm.server.nw.service.NwChangeLogService@4e7989f3 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|NwChangeLogService in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.ejb.EJBTransactionRolledbackException: ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public com.sap.mcm.server.model.ChangeLog com.sap.mcm.server.dao.impl.ChangeLogDaoImpl.findByUserId(java.lang.String) method on bean instance com.sap.mcm.server.dao.impl.ChangeLogDaoImpl@2852b733 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|ChangeLogDaoImpl in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.persistence.NonUniqueResultException: More than 1 objects of type ChangeLog found with userId=25f8928e-8ba0-4edd-b08e-43bf6fb78f1a; nested exception is: javax.ejb.EJBException: ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public com.sap.mcm.server.model.ChangeLog com.sap.mcm.server.dao.impl.ChangeLogDaoImpl.findByUserId(java.lang.String) method on bean instance com.sap.mcm.server.dao.impl.ChangeLogDaoImpl@2852b733 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|ChangeLogDaoImpl in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.persistence.NonUniqueResultException: More than 1 objects of type ChangeLog found with userId=25f8928e-8ba0-4edd-b08e-43bf6fb78f1a}
2015-03-12 04:08:31.634 Saudi Ceramics[4867:351095] Uploading sales order route map failed.

Hi Sukalyan,
Have you checked the below links?
These will give you step by step implementation procedure.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a099a3bd-17ef-2b10-e6ac-9c1ea42af0e9?quicklink=index&overridelayout=true
http://wiki.sdn.sap.com/wiki/display/WDJava/KmuploadusingWebdynproapplication
Regards,
Sandip

Error message:render error while running sales and reports

r message:render error while running sales and reports.
how do you fix it?

Hello,
Thanks for your post.
I can't find any useful information based on the error message. Could you please elaborate your scenario with more detail? In addition, please help to collect detail log information regarding this issue.
If this issue occured while view a SSRS report, please take a look at the following artice:
How to diagnose issues when running reports in the report server?
http://blogs.msdn.com/b/lukaszp/archive/2007/01/31/how-to-diagnose-issues-when-running-reports-in-the-report-server.aspx
Regards,
Elvis Long
TechNet Community Support

Error while pulling sales history into planning area

Hi Folks,
We got error while pulling the sales history data into planning area from infocube.
We uploaded CVC into MPOS.
Please find the below error.
""Combinationens of infocube are not contained in BasisPlobStru""
Message no:/SAPAPO/MSDP_REL106
Thanks
Sri

Hi,
The issue is that The Characteristic Combination is present in MPOS as well as in the list cube.While Uploading sales from the list cube result is that for some months Sales is matching exactly where as for some months data is not showing in the planning area though sales is present in list cube for the same month.I have run Consistency checks for Time series also.
Thanks
sri

Error while creating parameterise view

I m getting below error while creating parameterise view
CREATE OR REPLACE VIEW rdr_le_info_view (v_run_number , v_isin_cob )
AS
SELECT l.strategic_le
,cun.ucn cunucn
,cun.date
,cccs.ucn ucn
,cccs.agr_num
FROM strat_le l
,ucn_name cun
,customer_setup cccs
WHERE l.gfa_until_dt = '31-dec-9999'
AND l.glas_until_dt = '31-dec-9999'
AND l.int_until_dt = '31-dec-9999'
AND cccs.run_num = v_run_num
AND cccs.ucn_lead_office = cun.ucn
AND cun.OID = l.client_oid;
AND cccs.run_num = v_run_num
ERROR at line 13:
ORA-00904: "V_RUN_NUM": invalid identifier
Plese help me in above.

Try
CREATE OR REPLACE VIEW rdr_le_info_view
AS
SELECT l.strategic_le
,cun.ucn cunucn
,cun.date
,cccs.ucn ucn
,cccs.agr_num
FROM strat_le l
,ucn_name cun
,customer_setup cccs
,cccs.run_num run_num
WHERE l.gfa_until_dt = '31-dec-9999'
AND l.glas_until_dt = '31-dec-9999'
AND l.int_until_dt = '31-dec-9999'
AND cccs.ucn_lead_office = cun.ucn
AND cun.OID = l.client_oid;Then call it like:
select *
from rdr_le_info_view
where run_num = v_run_num;

Error while uploading Template

Error while uploading Template in Internet Procurement Catalog Administrator responsibility
I downloaded "Item Price" and i had one item onto spread sheet and tried to upload in above responsibility.
This is how header level is in the template and line level has item information.
#ENCODING     Cp1252
Language Section*     EN-US
Catalog Section     Supplier*      Title
     FEDERAL INDUSTRIES     Test Catalog
***********When i looked into log file i see error message ********************
[5/20/11 7:58:13 PM] <INFO> Session language altered to AMERICAN
[5/20/11 7:58:13 PM] <INFO> Session territory altered to AMERICA
[5/20/11 7:58:13 PM] <INFO> ********** Loader started **********
[5/20/11 9:35:08 AM] <ERROR> USR:MSG:POM_CAT_MISS_LANG_SEC
[5/20/11 9:35:08 AM] <ERROR> -> Missing Language Section.
[5/20/11 9:35:08 AM] <INFO> *********************
[5/20/11 9:35:08 AM] <ERROR> Failure Message is ::
[5/20/11 9:35:08 AM] <ERROR> USR:MSG:POM_CAT_MISS_LANG_SEC
[5/20/11 9:35:08 AM] <INFO> *********************
[5/20/11 9:35:08 AM] <INFO> Job failed
[5/20/11 9:35:08 AM] <INFO> ********** Loader stopped **********
I already had language section in the template as shown above, not sure why it is giving error.
could you please let me know how to troubleshoot
Edited by: 855902 on May 20, 2011 5:02 PM

Hi,
We believe you are getting this error because of some kind of format issue in the flat file which you are loading..
You can refer below URL:
http://appswork.blogspot.com/2009/09/catalog-loader.html
/S.P DASH

Error while uploading BITMAP image in SAP through SE78.

Hello all,
I am getting below error while uploading image into SAP through SE78.
'Bitmap file: No color table available (True Color, Bitcount 32)'.
I have tried searching for solution and got some help from below reply from a thread:
You may do these options:
1. Lower the resolution of the image
2. Lower the file size of the image
Regards,
Reymar
I have got a image size of 6.14 KB and resolution of 72*72 dots per inch.
Thanks in Advance.
- Jayant Sahu.

Hi Daniel,
First of all, if you dont mind, start a new thread for your question please.
Anyways, answer to your question is --
You need to save your picture with lower-most bits BITMAP Type. When you were saving your picture as .bmp, take care you are passing lower-most BITMAP type and not 24-bit as it may be as default.
This way, your problem would be resolved.
Thanks.
Kumar Saurav.

Getting a Page Cannot be Displayed error while uploading a Contract Document in SAP E-sourcing for size 500mb

Hi Guys,
I am getting a Page can not be displayed error while uploading a COntract Document in SAP-E-soucing 7.0.
Maximum Size set in Our SYSTEM is :9765MB.
Approx size of the Document tried is more then 300MB.
Appreciate your help on this.
Regards
Tarun

Hi Tarun,
Please check the below system properties using system user login
attachments.maxSizeKB.buyers - "Maximum size in KB of a employer-attached attachment file"
attachments.upload.enable.buyers- " Enable/Disable uploading of attachments by internal users"
Also Please check with other attachment, contracts related properties in the System.
Let me know if this helps.
Thanks,
Raj.

Error while uploading Transport request

Hi friends,
Error while uploading transport request to the transport directory,
we downloaded the trasnport request from one sap system which have a set of developments
for example downloaded files are;
control file: K900470.SAD and Data file: R900470.SAD fronm transport directory.
we are trying to upload the transport to another Sap system
we have
Uploaded the controlling file K900470.sad to the location  /usr/sap/transpad/cofiles/
Uploaded the controlling file R900470.sad to the location  /usr/sap/transpad/data/
we tried tro add in the import queues using TCODE: STMS
and trying to import.
During import we get
error:
HALT: unknown dynpro format: d021s_length() returned 0 Please contactthe SAP support.
End with rc : 16
Please help me with the problem.
Thanks in advance
Deepak

Hi,
Check the versions of the two sap systems you are downloading and uploading the transport requests

DB Connect Load - "Unknow error while uploading data from the DB Table"

Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
Abhijit

Hi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait

Error While Creating Sales Document - on a new rollout

Dear Friends,
        While going for new Plant Creation on a Rollout, i am getting the following error while creating Sales Order,
Kindly suggest the needy to me,
" _Template and one-time material processing is not activated
No determination routine is specified for the SD documents for the
permitted combinations
The combination of sales organization, document category, and
document type or delivery type for the SD document is not permitted_ "
Thanks & Regards
T.Arulvanan

Dear Freind,
Have you assigned the Sales Area to the Document types
T-code : OVAZ.
Also Check the Sales Applications V/c2
Can you double click on the error and See what is the datails of the error appearing?
Regards,
Amlan Sarkar

Getting error while uploading a document in a library

Hi,
I'm getting a weird error while uploading the document in the library. And I don't get it all the times but most of the times.
It reads:
The file <library name>/<file name> has been modified by i:0#.<user-id> on <datetime stamp>
How to resolve this ? I have referred many articles on this one, but none helped.
Thanks for your response in advance.
Regards

Hi Prajk,
Based on your description, I recommend to check if there are any ItemAdded event receiver or workflows which are triggered when an item is created to update the document properties in the library.
If there is any ItemAdded event receiver on the library, I recommend to wait for ItemAdded to finish before the ListFieldIterator control residing on EditForm.aspx loads (It’s the ListFieldIterator which displays the Item’s fields ).
http://blogs.msdn.com/b/manuj/archive/2009/09/22/itemadded-event-on-document-library-the-file-has-been-modified-by-on-error.aspx
If there is any workflow on the library, I recommend to add a Pause for Duration step at the beginning of the workflows.
If above cannot work, please check ULS log for detailed error message.
For SharePoint 2013, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Error while uploading text file....

Halo Friends,
I am uploading 4 text files which contain three columns separated by a tab, but when i am trying to upload those files using WS_UPLOAD Function Module i am getting a runtime error saying 'error while uploading/downloading'.
Please solve this problem as soon as possible.
Thanks in Advance,
rama

Halo again,
Now that i am able to upload the files, i need to update the database table the update statement is executing correctly but when i debug i see that the sy-subrc value is 4 but not 0.
and hence the it is not committed.
Any suggestions. i am pasting my code here for your reference:
Tables: qmfe.
data: begin of gt1_qmfe occurs 0,
      qmnum       like qmfe-qmnum,
      fenum       like qmfe-fenum,
      /itml/usr20 like qmfe-/itml/usr20,
      end of gt1_qmfe.
data: begin of gt2_qmfe occurs 0,
      qmnum       like qmfe-qmnum,
      fenum       like qmfe-fenum,
      /itml/usr21 like qmfe-/itml/usr21,
      end of gt2_qmfe.
data: begin of gt3_qmfe occurs 0,
      qmnum       like qmfe-qmnum,
      fenum       like qmfe-fenum,
      /itml/usr19 like qmfe-/itml/usr19,
      end of gt3_qmfe.
data: begin of gt4_qmfe occurs 0,
      qmnum       like qmfe-qmnum,
      fenum       like qmfe-fenum,
      /itml/usr07 like qmfe-/itml/usr07,
      end of gt4_qmfe.
data: gs1_qmfe like line of gt1_qmfe,
      gs2_qmfe like line of gt2_qmfe,
      gs3_qmfe like line of gt3_qmfe,
      gs4_qmfe like line of gt4_qmfe.
data: ls_lines1 type i,
      ls_lines2 type i,
      ls_lines3 type i,
      ls_lines4 type i.
parameters: ip_file1 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\StoDt.txt'     obligatory,
            ip_file2 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\RcDtCust.txt' obligatory,
            ip_file3 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\DockDate.txt' obligatory,
            ip_file4 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\AWB.txt'       obligatory.
field-symbols: <fs1> like gs1_qmfe,
               <fs2> like gs2_qmfe,
               <fs3> like gs3_qmfe,
               <fs4> like gs4_qmfe.
perform upload_gt1_qmfe.
perform upload_gt2_qmfe.
perform upload_gt3_qmfe.
perform upload_gt4_qmfe.
perform update_qmfe.
*&      Form upload_gt1_qmfe
      text
--> p1        text
<-- p2        text
FORM upload_gt1_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
   FILENAME                      = ip_file1
   FILETYPE                      = 'DAT'
TABLES
    DATA_TAB                      = gt1_qmfe.
describe table gt1_qmfe lines ls_lines1.
write: / ls_lines1.
ENDFORM.                    " upload_gt1_qmfe
*&      Form upload_gt2_qmfe
      text
--> p1        text
<-- p2        text
FORM upload_gt2_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
   FILENAME                      = ip_file2
   FILETYPE                      = 'DAT'
TABLES
    DATA_TAB                      = gt2_qmfe.
describe table gt2_qmfe lines ls_lines2.
write: / ls_lines2.
ENDFORM.                    " upload_gt2_qmfe
*&      Form upload_gt3_qmfe
      text
--> p1        text
<-- p2        text
FORM upload_gt3_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
   FILENAME                      = ip_file3
   FILETYPE                      = 'DAT'
TABLES
    DATA_TAB                      = gt3_qmfe.
describe table gt3_qmfe lines ls_lines3.
write: / ls_lines3.
ENDFORM.                    " upload_gt3_qmfe
*&      Form upload_gt4_qmfe
      text
--> p1        text
<-- p2        text
FORM upload_gt4_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
   FILENAME                      = ip_file4
   FILETYPE                      = 'DAT'
TABLES
    DATA_TAB                      = gt4_qmfe.
describe table gt4_qmfe lines ls_lines4.
write: / ls_lines4.
ENDFORM.                    " upload_gt4_qmfe
*&      Form update_qmfe
      text
--> p1        text
<-- p2        text
FORM update_qmfe .
data ls_cnt type i.
loop at gt1_qmfe assigning <fs1>.
update qmfe set    /itml/usr20 = <fs1>-/itml/usr20
            where qmnum       = <fs1>-qmnum
            and    fenum       = <fs1>-fenum.
if sy-subrc = 0.
commit work.
add 1 to ls_cnt.
endif.
endloop.
write: / ls_cnt.
ENDFORM.                    " update_qmfe

Error while uploading SSRS Reports to SharePoint Report Library

Dear All,
I am having a SSRS Server running in SharePoint integrated mode and I am running reports in SharePoint successfully, but I am facing issue with one site as shown below.
I am getting below error while uploading a report to specific path as shown below;
I can upload to any link but not for the below link shows /departments/ocean
I checked my ReportServer paths from RS Configuration Manager and I cannot find that defined path there. But I can see all other links are registered()
Note: Below shows my web applications in SharePoint farm(four web sites). I have define paths(site collections) only in default web application, not in other webs which has a port number.
I am not sure how the RS Configuration Manager picks thoae Define Manage Path in site collections.
But I think, it should pick department site collections as well.
Could you please guide me how to rectify above error?
ASP.Net, C#.Net, SQL Server ,Win32

Hi,
I recommend to check you can connect to the site collection in Report Builder.
If not, please check if you have permission to access the site collection.
Please also check if the Report Server Integration Feature is activated in the site collection.
To narrow the issue scope, I recommend to create a new site collection using the departments path in SharePoint to see if the issue still occurs.
As a workaround, you can also save the report to local drive and then upload it to SharePoint library using Upload Document button in the ribbon in SharePoint library.
In the meanwhile, you can post your question to the forum for SSRS: http://social.technet.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices.
More experts will assist you, then you will get more information relation to SSRS.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Error while uploading Bank Statement in FF.5

Hello all
I am getting the following error while uploading the Bank Statement file in FF.5-
Termination in statement no. 00000 of acct ; closing record 62F missing
The file format is MT940.
Can somebody throw some light on this message if any1 has encountered this.
Thanks in advance
Hrishikesh

Hi,
The error itself is telling u that the closing balance in the bank statement is missing. Check the MT940 format statement in that check whether field 62F is present or not. If that line is missing then system cant understand the format.
regards
srikanth.

Error while uploading Sales View

Similar Messages

Maybe you are looking for