Error while uploading through bdc

Hi All,
While uploading data throgh bdc i am getting error in error file for few employees as " No batch input data for screen SAPLRPBS 2000 " ..what i need to do to solve this problem.
Thanks.

Hello absap,
if your requirement is an enhancement of a program that uses BDC to update OR populate a particular screen,
set your bdc mode to "A" to display the entire bdc processing.
you can basically find this in the line:
CALL TRANSACTION <command>
USING <bdctab>
MODE <mode>.     <--- by defualt this should be MODE N.
the error that you have encountered is due to an UNpopulated REQUIRED field in the screen of the transacation or command you called in the BDC process.
you can easily trace this error by setting the mode to A to display the bdc process itself.
alternatively, if you are creating new program, revisit your bdc recording and check if all the required fields are being populated.
trick:
when you record in SHDB, open a new window of the transaction.command that you are going to use.
and from there, populate the fields specified in your requirement and by this, you should not miss any required field in you bdc.
hope it helps,
Mark

Similar Messages

  • To Tackle duplicate data while uploading through BDC

    Dear All,
    I am uploading data through BDC in HR for Infotype 2011. While uploading the data i want to check for data which is already available for same date & time and display error accordingly.
    Kindly help me in this. Also is it possible to handle this by setting infotype charactertics to accept only single values or we can handle it through our code.
    Thanks in advance.
    Regards,
    Swapnil

    Hi,
    The only characteristic that handle the availibility of record at one time is the time constraint indicator and won't be very usefull to you for a time event infotype. In your case you will have to check if the entry you are creating already exist in TEVEN table.
    Kr,
    m.

  • Error while uploading through webadi

    Hi Group,
    I am getting this error
    SQL exception occurred during PL/SQL upload.
    when ever I am trying to upload the Employee data through web adi. The employee number generation is automatic global and I am not including the employee number in the excel sheet.
    I have refer to the doc on metalink 553025.1 which is not making much sense to me. Can any one please suggest what is going wrong
    Thanks,
    Nitin Singh

    Hi,
    Why does not make sense? Did you try to increase the parameter, bounce the database and see if this helps?
    Regards,
    Hussein

  • Error while uploading BITMAP image in SAP through SE78.

    Hello all,
    I am getting below error while uploading image into SAP through SE78.
    'Bitmap file: No color table available (True Color, Bitcount 32)'.
    I have tried searching for solution and got some help from below reply from a thread:
    You may do these options:
    1. Lower the resolution of the image
    2. Lower the file size of the image
    Regards,
    Reymar
    I have got a image size of 6.14 KB and resolution of 72*72 dots per inch.
    Thanks in Advance.
    - Jayant Sahu.

    Hi Daniel,
    First of all, if you dont mind, start a new thread for your question please.
    Anyways, answer to your question is --
    You need to save your picture with lower-most bits BITMAP Type. When you were saving your picture as .bmp, take care you are passing lower-most BITMAP type and not 24-bit as it may be as default.
    This way, your problem would be resolved.
    Thanks.
    Kumar Saurav.

  • Error While Uploading GL Master Data in LSMW

    Hello Experts,
    I am running into error while uploading GL master data in LSMW, I created recording through FS00, then I mapped the fields, it all went good till 13th step, but last step got stuck(Run Batch Input Session), when I am running batch input session, system is showing this message "Function Code cannot be selected"
    Your help would be highly appreciated.
    Regards
    Muhammad Yousuf Ali
    SAP FI Consultant

    Hi,
    first can you pls check your Hierarchy mode setting in FS00 -  before executing Batch input session -
    Open FS00 - go to settings - and Do not display navigation tree select radio button and save it
    then Now Run fresh LSMW - your issue will resolve
    Mahesh

  • Error while uploading file in BPS

    Hi all,
    I am getting an error while uploading file to BPS through web interface
    I get a red stop button with error message : error while calling up RFC.
    when i double click the red stop button, i get no long text but the error message I get is UPC 202
    please advice me to resolve this issue.
    many thanks in advance,
    Ravi

    The informations are really not much to have an idea about the problem.
    The problem can be located in the fm that calls the file because is trying to search the file on a system where there are some kind of problems in the communication between the systems involved to read and pass the file. Did u map the file name with logical filenames ? Very strange problem. Can you browse in the server where the file is located . Is it on your pc ?
    Or, there is some problem in the datas provided, but this problem should arise more when you save than when you just press to load.
    With this kind of imformations is very hard to have an idea. You need to debug to see what s going on
    Regards

  • Error in upload FS00 BDC

    Hi All,
    I have written bdc for tcode FS00 for gl master record upload but im getting the below error while uploading.
    Cursor filed GLACCOUNT_CCODE-WAERS. does not exist in the screen.
    But the screen has the default value for WAERS as EUR.
    Can you please let me know ,what is the prblem involved?
    Regards,
    Priya

    Hi,
    Thanks for the information.
    I tired that too.
    if i execute the program in ' A' ,it is uploading the data successfully.
    If i try to exceute in 'N' mode ,it is giving that error.
    Regards,
    Priya.

  • Getting error while uploading gl master data using LSMW batch input data

    Hi Experts,
    I am getting error while uploading the GL master data through lsmw using batch input recording.
    After completion of all steps at the time of running batch input session error i am getting is "maintain EN language discription"
    and Pls tell me is it possible to upload transactional data using lsmw? if yes pls explaing briefly.

    Hello,
    Kindly post in the FI forum to get a better response.
    Regarding the issue you might check whether the correct column is being picked up where you have maintained the description.
    Kind Regards // Shaubhik

  • Error while scheduling through web service

    We have created Web service through WSDL of OBI Publisher. Also we created a web service proxy client to call the services offered by OBI Publisher. We actually want to  "Automate the Scheduling of Reports" according to our requirement:
    1. We used to schedule the reports manually by giving the parameters(used to populate data in reports) and other fields like select report name, report destination, format of reports ( .pdf, .docx,etc) through Oracle BI Publisher.
    2. As there are thousands of permutations of report input parameters possible, so it is difficult to schedule them manually. 
    3.We also want to schedule report to a particular folder according to some parameter, for the ease of the user visibility.
    Above requirements are not currently available with Oracle BI Publisher.
    We are getting error while scheduling through ScheduleRequest class.
    The client.java is as follows:
    public class ScheduleServiceClient
      @WebServiceRef
      private static ScheduleService_Service scheduleService_Service;
      public static void main(String [] args)
        scheduleService_Service = new ScheduleService_Service();
        ScheduleService scheduleService = scheduleService_Service.getScheduleService();
        // Add your code to call the desired methods.
        try {      
                    FTPDeliveryOption ftpdo =new FTPDeliveryOption();
                    ftpdo.setFtpServerName("ServerName");
                    ftpdo.setFtpUserName("Username");
                    ftpdo.setFtpUserPassword("Password");
                    ftpdo.setRemoteFile("/path/TestFile");
                    ftpdo.setSftpOption(true);
                    List<FTPDeliveryOption> listobj=new ArrayList<FTPDeliveryOption>();
                    listobj.add(ftpdo);
                    ArrayOfFTPDeliveryOption ar =new ArrayOfFTPDeliveryOption(); 
                    ar.setItem(listobj);
                    DeliveryChannels dc = new DeliveryChannels();
                    dc.setFtpOptions(ar);
                    ScheduleRequest scheduleRequest = new ScheduleRequest();
                    scheduleRequest.setDeliveryChannels(dc);
                    scheduleRequest.setJobLocale("en-US");
                    scheduleRequest.setUserJobName("Job_1_WebService"); 
                    scheduleRequest.setDataModelUrl("Url");
                    scheduleRequest.setStartDate("Mar 27, 2015 12:40:00 PM");
                    scheduleRequest.setJobTZ("[GMT+05:30] Calcutta, Chennai, Mumbai, New Delhi");
                    String userID = "BI_Publisher_Username";
                    String password = "BI_Publisher_Password";
                    scheduleService.scheduleReport(scheduleRequest,userID,password);
                } catch(Exception exception) {
                    exception.printStackTrace();
    Snapshot of error is attached.
    Kindly suggest the way of getting out of this error.

    Hi
    Check this thread
    WD Message Manager
    Reward opints if usefull....

  • Error while uploading Template

    Error while uploading Template in Internet Procurement Catalog Administrator responsibility
    I downloaded "Item Price" and i had one item onto spread sheet and tried to upload in above responsibility.
    This is how header level is in the template and line level has item information.
    #ENCODING     Cp1252                                                  
    Language Section*     EN-US                                                  
    Catalog Section     Supplier*      Title                                             
         FEDERAL INDUSTRIES     Test Catalog     
    ***********When i looked into log file i see error message ********************
    [5/20/11 7:58:13 PM] <INFO> Session language altered to AMERICAN
    [5/20/11 7:58:13 PM] <INFO> Session territory altered to AMERICA
    [5/20/11 7:58:13 PM] <INFO> ********** Loader started **********
    [5/20/11 9:35:08 AM] <ERROR> USR:MSG:POM_CAT_MISS_LANG_SEC
    [5/20/11 9:35:08 AM] <ERROR> -> Missing Language Section.
    [5/20/11 9:35:08 AM] <INFO> *********************
    [5/20/11 9:35:08 AM] <ERROR> Failure Message is ::
    [5/20/11 9:35:08 AM] <ERROR> USR:MSG:POM_CAT_MISS_LANG_SEC
    [5/20/11 9:35:08 AM] <INFO> *********************
    [5/20/11 9:35:08 AM] <INFO> Job failed
    [5/20/11 9:35:08 AM] <INFO> ********** Loader stopped **********
    I already had language section in the template as shown above, not sure why it is giving error.
    could you please let me know how to troubleshoot
    Edited by: 855902 on May 20, 2011 5:02 PM

    Hi,
    We believe you are getting this error because of some kind of format issue in the flat file which you are loading..
    You can refer below URL:
    http://appswork.blogspot.com/2009/09/catalog-loader.html
    /S.P DASH

  • Getting a Page Cannot be Displayed error while uploading a Contract Document in SAP E-sourcing for size 500mb

    Hi Guys,
    I am getting a Page can not be displayed error while uploading a COntract Document in SAP-E-soucing 7.0.
    Maximum Size set in Our SYSTEM is :9765MB.
    Approx size of the Document tried is more then 300MB.
    Appreciate your help on this.
    Regards
    Tarun

    Hi Tarun,
    Please check the below system properties using system user login
    attachments.maxSizeKB.buyers - "Maximum size in KB of a employer-attached attachment file"
    attachments.upload.enable.buyers-  " Enable/Disable uploading of attachments by internal users"
    Also Please check with other attachment, contracts related properties in the System.
    Let me know if this helps.
    Thanks,
    Raj.

  • Error while uploading Transport request

    Hi friends,
    Error while uploading transport request to the transport directory,
    we downloaded the trasnport request from one sap system which have a set of developments
    for example downloaded files are;
    control file: K900470.SAD and Data file: R900470.SAD fronm transport directory.
    we are trying to upload the transport to another Sap system
    we have
    Uploaded  the controlling file K900470.sad to the location  /usr/sap/transpad/cofiles/
    Uploaded the controlling file R900470.sad to the location  /usr/sap/transpad/data/
    we tried tro  add in the import queues using  TCODE: STMS
    and trying to import.
    During import we get
    error:
    HALT: unknown dynpro format: d021s_length() returned 0 Please contactthe SAP support.
    End with rc : 16
    Please help me with the problem.
    Thanks in advance
    Deepak

    Hi,
       Check the versions of the two sap systems you are downloading and uploading the transport requests

  • DB Connect Load - "Unknow error while uploading data from the DB Table"

    Hi Experts,
    We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
    I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
    At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
    Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
    Please advice.
    Thanks,
    Abhijit

    Hi,
    Sorry for bumping an old thread ....
    Did this issue get ever get resolved?
    I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
    One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
    I get "Unknown Error" whenever I trigger the data package.
    Advait

  • Getting error while uploading a document in a library

    Hi,
    I'm getting a weird error while uploading the document in the library. And I don't get it all the times but most of the times.
    It reads:
    The file <library name>/<file name> has been modified by i:0#.<user-id> on <datetime stamp>
    How to resolve this ? I have referred many articles on this one, but none helped.
    Thanks for your response in advance.
    Regards

    Hi Prajk,
    Based on your description, I recommend to check if there are any ItemAdded event receiver or workflows which are triggered when an item is created to update the document properties in the library.
    If there is any ItemAdded event receiver on the library, I recommend to wait for ItemAdded to finish before the ListFieldIterator control residing on EditForm.aspx loads (It’s the ListFieldIterator which displays the Item’s fields ).
    http://blogs.msdn.com/b/manuj/archive/2009/09/22/itemadded-event-on-document-library-the-file-has-been-modified-by-on-error.aspx
    If there is any workflow on the library, I recommend to add a Pause for Duration step at the beginning of the workflows.
    If above cannot work, please check ULS log for detailed error message.
    For SharePoint 2013, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Error while uploading text file....

    Halo Friends,
    I am uploading 4 text files which contain three columns separated by a tab, but when i am trying to upload those files using WS_UPLOAD Function Module i am getting a runtime error saying 'error while uploading/downloading'.
    Please solve this problem as soon as possible.
    Thanks in Advance,
    rama

    Halo again,
    Now that i am able to upload the files, i need to update the database table the update statement is executing correctly but when i debug i see that the sy-subrc value is 4 but not 0.
    and hence the it is not committed.
    Any suggestions. i am pasting my code here for your reference:
    Tables: qmfe.
    data: begin of gt1_qmfe occurs 0,
          qmnum       like qmfe-qmnum,
          fenum       like qmfe-fenum,
          /itml/usr20 like qmfe-/itml/usr20,
          end of gt1_qmfe.
    data: begin of gt2_qmfe occurs 0,
          qmnum       like qmfe-qmnum,
          fenum       like qmfe-fenum,
          /itml/usr21 like qmfe-/itml/usr21,
          end of gt2_qmfe.
    data: begin of gt3_qmfe occurs 0,
          qmnum       like qmfe-qmnum,
          fenum       like qmfe-fenum,
          /itml/usr19 like qmfe-/itml/usr19,
          end of gt3_qmfe.
    data: begin of gt4_qmfe occurs 0,
          qmnum       like qmfe-qmnum,
          fenum       like qmfe-fenum,
          /itml/usr07 like qmfe-/itml/usr07,
          end of gt4_qmfe.
    data: gs1_qmfe like line of gt1_qmfe,
          gs2_qmfe like line of gt2_qmfe,
          gs3_qmfe like line of gt3_qmfe,
          gs4_qmfe like line of gt4_qmfe.
    data: ls_lines1 type i,
          ls_lines2 type i,
          ls_lines3 type i,
          ls_lines4 type i.
    parameters: ip_file1 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\StoDt.txt'     obligatory,
                ip_file2 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\RcDtCust.txt'  obligatory,
                ip_file3 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\DockDate.txt'  obligatory,
                ip_file4 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\AWB.txt'       obligatory.
    field-symbols: <fs1> like gs1_qmfe,
                   <fs2> like gs2_qmfe,
                   <fs3> like gs3_qmfe,
                   <fs4> like gs4_qmfe.
    perform upload_gt1_qmfe.
    perform upload_gt2_qmfe.
    perform upload_gt3_qmfe.
    perform upload_gt4_qmfe.
    perform update_qmfe.
    *&      Form  upload_gt1_qmfe
          text
    -->  p1        text
    <--  p2        text
    FORM upload_gt1_qmfe .
    CALL FUNCTION 'WS_UPLOAD'
    EXPORTING
       FILENAME                      = ip_file1
       FILETYPE                      = 'DAT'
      TABLES
        DATA_TAB                      = gt1_qmfe.
    describe table gt1_qmfe lines ls_lines1.
    write: / ls_lines1.
    ENDFORM.                    " upload_gt1_qmfe
    *&      Form  upload_gt2_qmfe
          text
    -->  p1        text
    <--  p2        text
    FORM upload_gt2_qmfe .
    CALL FUNCTION 'WS_UPLOAD'
    EXPORTING
       FILENAME                      = ip_file2
       FILETYPE                      = 'DAT'
      TABLES
        DATA_TAB                      = gt2_qmfe.
    describe table gt2_qmfe lines ls_lines2.
    write: / ls_lines2.
    ENDFORM.                    " upload_gt2_qmfe
    *&      Form  upload_gt3_qmfe
          text
    -->  p1        text
    <--  p2        text
    FORM upload_gt3_qmfe .
    CALL FUNCTION 'WS_UPLOAD'
    EXPORTING
       FILENAME                      = ip_file3
       FILETYPE                      = 'DAT'
      TABLES
        DATA_TAB                      = gt3_qmfe.
    describe table gt3_qmfe lines ls_lines3.
    write: / ls_lines3.
    ENDFORM.                    " upload_gt3_qmfe
    *&      Form  upload_gt4_qmfe
          text
    -->  p1        text
    <--  p2        text
    FORM upload_gt4_qmfe .
    CALL FUNCTION 'WS_UPLOAD'
    EXPORTING
       FILENAME                      = ip_file4
       FILETYPE                      = 'DAT'
      TABLES
        DATA_TAB                      = gt4_qmfe.
    describe table gt4_qmfe lines ls_lines4.
    write: / ls_lines4.
    ENDFORM.                    " upload_gt4_qmfe
    *&      Form  update_qmfe
          text
    -->  p1        text
    <--  p2        text
    FORM update_qmfe .
    data ls_cnt type i.
    loop at gt1_qmfe assigning <fs1>.
    update qmfe set    /itml/usr20 = <fs1>-/itml/usr20
                where  qmnum       = <fs1>-qmnum
                and    fenum       = <fs1>-fenum.
    if sy-subrc = 0.
    commit work.
    add 1 to ls_cnt.
    endif.
    endloop.
    write: / ls_cnt.
    ENDFORM.                    " update_qmfe

Maybe you are looking for