Error while uploading Transport request

Hi friends,
Error while uploading transport request to the transport directory,
we downloaded the trasnport request from one sap system which have a set of developments
for example downloaded files are;
control file: K900470.SAD and Data file: R900470.SAD fronm transport directory.
we are trying to upload the transport to another Sap system
we have
Uploaded the controlling file K900470.sad to the location  /usr/sap/transpad/cofiles/
Uploaded the controlling file R900470.sad to the location  /usr/sap/transpad/data/
we tried tro add in the import queues using TCODE: STMS
and trying to import.
During import we get
error:
HALT: unknown dynpro format: d021s_length() returned 0 Please contactthe SAP support.
End with rc : 16
Please help me with the problem.
Thanks in advance
Deepak

Hi,
Check the versions of the two sap systems you are downloading and uploading the transport requests

Similar Messages

Error while uploading Transport request from SAP ECC6.0 EHP4 to SAP ECC 5.0

Hi friends,
Error while uploading transport request to the transport directory,
we downloaded the transport request from one sap system which have a set of developments(contains screen programs)
for example downloaded all co files and data files
control file: K900470.SAD and Data file: R900470.SAP from transport directory.
we are trying to upload the transport to another Sap system
we have
Uploaded the controlling file K900470.sad to the location  /usr/sap/transpad/cofiles/
Uploaded the controlling file R900470.sad to the location  /usr/sap/transpad/data/
we tried to add in the import queues using TCODE: STMS and trying to import.
During import we get the below error:
HALT: unknown dynpro format: d021s_length() returned 0 Please contact the SAP support.
End with rc : 16
Please help me on this
We are trying to copy from ECC 6.0 EHP4 to SAP 5.0 and SAP 4.7EE
Thanks & Regards
Murali Papana

Did you see that you tried to transport to an older release!! You should have expected such a result.
Before doing such a thing, you should have looked at SAP notes to see SAP recommendations, if any. And you're lucky, there are ones: [Note 1090842 - Composite note: Transport across several releases|http://service.sap.com/sap/support/notes/1090842]. You need to know that ECC6 corresponds to SAP Basis 7.0, and ECC5 corresponds to SAP Basis 6.40.

Error while exporting transport requests

Dears,
In our PI 7.1 server,configured with CTS +,We are getting below error while exporting transport requests:
Caused by: com.sap.tc.di.draft.ts.TsExecutionException: Error executing function (check stacktrace for details): EPS_OPEN_OUTPUT_FILE, (service=com.sap.tms)
at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsJCoExceptions.throwTsServiceException(TmsJCoExceptions.java:74)
at com.sap.tc.di.draft.cts.impl.adapters.jco.EpsJCoAdapter.openFile(EpsJCoAdapter.java:98)
at com.sap.tc.di.draft.cts.impl.adapters.jco.AbapEpsOutputStream.open(AbapEpsOutputStream.java:83)
... 40 more
Caused by: com.sap.conn.jco.AbapException: (126) OPEN_FAILED: OPEN_FAILED
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcClient.execute(MiddlewareJavaRfc.java:1492)
at com.sap.conn.jco.rt.ClientConnection.execute(ClientConnection.java:1065)
at com.sap.conn.jco.rt.RfcDestination.execute(RfcDestination.java:987)
at com.sap.conn.jco.rt.RfcDestination.execute(RfcDestination.java:977)
at com.sap.conn.jco.rt.AbapFunction.execute(AbapFunction.java:300)
at com.sap.tc.di.draft.cts.impl.adapters.jco.JCoAdapter.executeFunction(JCoAdapter.java:103)
at com.sap.tc.di.draft.cts.impl.adapters.jco.EpsJCoAdapter.openFile(EpsJCoAdapter.java:78)
In SE01 it show tp 12 while releasing request.
Please suggest.
Shivam
Edited by: Shivam Mittal on Mar 16, 2010 1:04 PM

File Permission Issue.

Error while importting Transport Request

Hi,
I am getting following errors while Transporting requests from Development to Test System
Error getting fields for PSA /BIC/B0000643
Error occurred during post-handling RS_AFTER_IMPORT ofr DTPA L
The Transport request just contains one Transformation the corresponding DTP.
We are using BI 7 for Bank Analyzer and have just imported SP11. This problem has started coming only after the import of SP11.

Hi Pom,
Yes the DS were active. I tried to re-transport that too but the TR failed with similar error.
Finally I tried to manually activate the DTP in the Target system and got the same error. I rectified the problem by deleting the DTP from the Target system. But I am not sure why this happened. Please let me know if you have any idea abt the same.
Thanks
Pooja

Error while releasing Transport request number

Hi Friends,
Whenever i release the Transport request from SE01 i am getting the following error. Please view the attached image . Could you please explain about that error ? and how can i prevent it in future ?

At starting it shows warning like " Your object contains error continue or cancel " but if i proceed with continue after completion of the releasing process it shows (0) successfully completed but not with an error message. As Krishna Chaitanya said i might have used any dependent object. by reading all of your answer i could understand that this is not sever problem. But i would like to understand this process very clearly . All i want to know is
how to release the request without any inconsistencies?
and which is the best way, ?
is there any requisition before i initiate releasing ?

Error while releasing transport request

Hi,
When i tried to release the transport request, it returning with code = 8 (error) so transport has not done. When I digged into the transport request, error message is
'unimplemented function REPC_OR_DELETE DOCUMENTATION'.
Thanks in advance.
Arvind...

Hi,
This is more related to the BASIS side,
still have found one solution in one of the thread. Still contact you BASIS administrator for it.
Solution.
Is the error pointing at TP or R3trans?
In this phase, we get error coz of r3trans.
Please try following the note 206168. which tells you to change the r3trans.
If you have changed the r3trans earlier, then try using the same r3trans as provided in the kernel CD.
Jayant Sahu

Error while releasing transport request - Special character "_" in generic

Hi all,
we're receiving the error Special character "_" in generic key when releasing a best practice transport.
Note 1304725 describes my error, but the solution cannot be implemented. The reason for this is that we do not have an individual entry for eacht yb_PS,..,
but we have only one entry where field BWERT has a wildcard '*' as entry.
Does anyone has some idea how to solve this ?
kind regards !

Hello Bjorn,
How did you get this solved?
I'm having nearly the same issue:
A custom-table with a total key lenght of about 365 characters. As soon as I enter a special character (_) in the key field just before the position 120, the message tk287 rejects the entry. Entering the special character in a key field at about key position
60, there's no message rejecting the entry.
Regards

DB Connect Load - "Unknow error while uploading data from the DB Table"

Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
Abhijit

Hi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait

Error While uploading the Function and Function_BP

Hello,
I am getting the following error while uploading the Functions and Funtions_BP using the Rule Upload functions.
com.virsa.cc.comp.Function_upload.onActionUploadFunc(Function_upload.java:302) com.virsa.cc.comp.wdp.InternalFunction_upload.wdInvokeEventHandler(InternalFunction_upload.java:150) com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420) com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132) com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335) com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143) com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321) com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713) com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666) com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250) com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149) com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62) com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53) javax.servlet.http.HttpServlet.service(HttpServlet.java:760) javax.servlet.http.HttpServlet.service(HttpServlet.java:853) com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386) com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364) com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039) com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265) com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) java.security.AccessController.doPrivileged(Native Method) com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104) com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
The files which i am uploading the file from the Best practises only.
What is the reason for this error?
Did any one get this error?
Regards,
Kumar Rayudu
Edited by: Kumar Rayudu on Aug 4, 2009 12:32 PM

Hello Kumar,
Have you uploaded the SAP text and object files? Upload them first and then try to upload functions.
Harleen
SAP GRC RIG

Error while uploading images to SAP Mobile Documents from iPad application using ObjectiveCMIS.

Hi,
I am getting the error while uploading images to SAP Mobile Documents from custom iOS(iPad )application using ObjectiveCMIS library.
My Custom method is as follows:
- (void)createSalesOrderRouteMapImageInFolder:(NSString*)salesOrderRouteMapFolderId routeMapImageTitle:(NSString *)imageTitle routeMapContent:(NSData *)imageData
    NSInputStream *inputStream = [NSInputStream inputStreamWithData:imageData];
    NSMutableDictionary *properties = [NSMutableDictionary dictionary];
    [properties setObject:[NSString stringByAppendingFileExtension:imageTitle] forKey:@"cmis:name"];
    [properties setObject:@"cmis:document" forKey:@"cmis:objectTypeId"];
    [self.session createDocumentFromInputStream:inputStream
                                       mimeType:@"image/png"
                                     properties:properties
                                       inFolder:salesOrderRouteMapFolderId
                                  bytesExpected:[imageData length]
                                completionBlock:^(NSString *objectId, NSError *error) {
                                    NSLog(@"Object id is %@",objectId);
                                    if(error == nil) {
                                        [inputStream close];
                                        NSLog(@"Uploading Sales order route map successfully.");
                                        [[NSNotificationCenter defaultCenter] postNotificationName:SaveOrderSuccessNotification object:nil];
                                    } else {
                                        [inputStream close];
                                        NSLog(@"Uploading sales order route map failed.");
                                        [[NSNotificationCenter defaultCenter] postNotificationName:SaveOrderFailedNotification object:error];
                                } progressBlock:^(unsigned long long bytesUploaded, unsigned long long bytesTotal) {
                                    NSLog(@"uploading... (%llu/%llu)", bytesUploaded, bytesTotal);
OBjectiveCMIS Method in which i am getting error during upload:
- (void)sendAtomEntryXmlToLink:(NSString *)link
             httpRequestMethod:(CMISHttpRequestMethod)httpRequestMethod
                    properties:(CMISProperties *)properties
            contentInputStream:(NSInputStream *)contentInputStream
               contentMimeType:(NSString *)contentMimeType
                 bytesExpected:(unsigned long long)bytesExpected
                   cmisRequest:(CMISRequest*)request
               completionBlock:(void (^)(CMISObjectData *objectData, NSError *error))completionBlock
                 progressBlock:(void (^)(unsigned long long bytesUploaded, unsigned long long bytesTotal))progressBlock
    // Validate param
    if (link == nil) {
        CMISLogError(@"Must provide link to send atom entry");
        if (completionBlock) {
            completionBlock(nil, [CMISErrors createCMISErrorWithCode:kCMISErrorCodeInvalidArgument detailedDescription:nil]);
        return;
    // generate start and end XML
    CMISAtomEntryWriter *writer = [[CMISAtomEntryWriter alloc] init];
    writer.cmisProperties = properties;
    writer.mimeType = contentMimeType;
    NSString *xmlStart = [writer xmlStartElement];
    NSString *xmlContentStart = [writer xmlContentStartElement];
    NSString *start = [NSString stringWithFormat:@"%@%@", xmlStart, xmlContentStart];
    NSData *startData = [NSMutableData dataWithData:[start dataUsingEncoding:NSUTF8StringEncoding]];
    NSString *xmlContentEnd = [writer xmlContentEndElement];
    NSString *xmlProperties = [writer xmlPropertiesElements];
    NSString *end = [NSString stringWithFormat:@"%@%@", xmlContentEnd, xmlProperties];
    NSData *endData = [end dataUsingEncoding:NSUTF8StringEncoding];
    // The underlying CMISHttpUploadRequest object generates the atom entry. The base64 encoded content is generated on
    // the fly to support very large files.
    [self.bindingSession.networkProvider invoke:[NSURL URLWithString:link]
                                     httpMethod:httpRequestMethod
                                        session:self.bindingSession
                                    inputStream:contentInputStream
                                        headers:[NSDictionary dictionaryWithObject:kCMISMediaTypeEntry forKey:@"Content-type"]
                                  bytesExpected:bytesExpected
                                    cmisRequest:request
                                      startData:startData
                                        endData:endData
                              useBase64Encoding:YES
                                completionBlock:^(CMISHttpResponse *response, NSError *error) {
                                    if (error) {
                                        CMISLogError(@"HTTP error when sending atom entry: %@", error.userInfo.description);
                                        if (completionBlock) {
                                            completionBlock(nil, error);
                                    } else if (response.statusCode == 200 || response.statusCode == 201 || response.statusCode == 204) {
                                        if (completionBlock) {
                                            NSError *parseError = nil;
                                            CMISAtomEntryParser *atomEntryParser = [[CMISAtomEntryParser alloc] initWithData:response.data];
                                            [atomEntryParser parseAndReturnError:&parseError];
                                            if (parseError == nil) {
                                                completionBlock(atomEntryParser.objectData, nil);
                                            } else {
                                                CMISLogError(@"Error while parsing response: %@", [parseError description]);
                                                completionBlock(nil, [CMISErrors cmisError:parseError cmisErrorCode:kCMISErrorCodeRuntime]);
                                    } else {
                                        CMISLogError(@"Invalid http response status code when sending atom entry: %d", (int)response.statusCode);
                                        CMISLogError(@"Error content: %@", [[NSString alloc] initWithData:response.data encoding:NSUTF8StringEncoding]);
                                        if (completionBlock) {
                                            completionBlock(nil, [CMISErrors createCMISErrorWithCode:kCMISErrorCodeRuntime
                                                                                 detailedDescription:[NSString stringWithFormat:@"Failed to send atom entry: http status code %li", (long)response.statusCode]]);
                                  progressBlock:progressBlock];
Attaching the logs:
ERROR [CMISAtomPubBaseService sendAtomEntryXmlToLink:httpRequestMethod:properties:contentInputStream:contentMimeType:bytesExpected:cmisRequest:completionBlock:progressBlock:] HTTP error when sending atom entry: Error Domain=org.apache.chemistry.objectivecmis Code=260 "Runtime Error" UserInfo=0x156acfa0 {NSLocalizedDescription=Runtime Error, NSLocalizedFailureReason=ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public void com.sap.mcm.server.service.AbstractChangeLogService.updateChangeLog(java.lang.String,boolean) throws com.sap.mcm.server.api.exception.MCMException method on bean instance com.sap.mcm.server.nw.service.NwChangeLogService@4e7989f3 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|NwChangeLogService in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.ejb.EJBTransactionRolledbackException: ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public com.sap.mcm.server.model.ChangeLog com.sap.mcm.server.dao.impl.ChangeLogDaoImpl.findByUserId(java.lang.String) method on bean instance com.sap.mcm.server.dao.impl.ChangeLogDaoImpl@2852b733 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|ChangeLogDaoImpl in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.persistence.NonUniqueResultException: More than 1 objects of type ChangeLog found with userId=25f8928e-8ba0-4edd-b08e-43bf6fb78f1a; nested exception is: javax.ejb.EJBException: ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public com.sap.mcm.server.model.ChangeLog com.sap.mcm.server.dao.impl.ChangeLogDaoImpl.findByUserId(java.lang.String) method on bean instance com.sap.mcm.server.dao.impl.ChangeLogDaoImpl@2852b733 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|ChangeLogDaoImpl in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.persistence.NonUniqueResultException: More than 1 objects of type ChangeLog found with userId=25f8928e-8ba0-4edd-b08e-43bf6fb78f1a}
2015-03-12 04:08:31.634 Saudi Ceramics[4867:351095] Uploading sales order route map failed.

Hi Sukalyan,
Have you checked the below links?
These will give you step by step implementation procedure.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a099a3bd-17ef-2b10-e6ac-9c1ea42af0e9?quicklink=index&overridelayout=true
http://wiki.sdn.sap.com/wiki/display/WDJava/KmuploadusingWebdynproapplication
Regards,
Sandip

Getting error while uploading multiple files in sharepoint hosted app in 2013 with REST API

Hi All,
In one of my tasks, I was struck with one issue, that is "While uploading multiple files into custom list with REST API".
Iam trying to upload multiple files in library with REST calls for an APP development, my issue is if i wants to upload 4 image at once its storing only
3 image file and further giving "Conflict" error". Below is the attached screenshot of exact error.
Error within screenshot are : status Code : 409
status Text :conflict
For this operation i am uploading different files as an attachment to an list item, below is the code used for uploading multiple files.
my code is
function PerformUpload(listName, fileName, listItem, fileData)
var urlOfAttachment="";
// var itemId = listItem.get_id();
urlOfAttachment = appWebUrl + "/_api/web/lists/GetByTitle('" + listName + "')/items(" + listItem + ")/AttachmentFiles/add(FileName='" + fileName + "')"
// use the request executor (cross domain library) to perform the upload
var reqExecutor = new SP.RequestExecutor(appWebUrl);
reqExecutor.executeAsync({
url: urlOfAttachment,
method: "POST",
headers: {
"Accept": "application/json; odata=verbose",
"X-RequestDigest": digest
contentType: "application/json;odata=verbose",
binaryStringRequestBody: true,
body: fileData,
success: function (x, y, z) {
alert("Success!");
error: function (x, y, z) {
alert(z);

Hi,
THis is common issue if your file size exceeds
upload a document of size more than 1mb. worksss well for kb files.
https://social.technet.microsoft.com/Forums/office/en-US/b888ac78-eb4e-4653-b69d-1917c84cc777/getting-error-while-uploading-multiple-files-in-sharepoint-hosted-app-in-2013-with-rest-api?forum=sharepointdevelopment
or try the below method
https://social.technet.microsoft.com/Forums/office/en-US/40b0cb04-1fbb-4639-96f3-a95fe3bdbd78/upload-files-using-rest-api-in-sharepoint-2013?forum=sharepointdevelopment
Please remember to click 'Mark as Answer' on the answer if it helps you

Error while uploading .xml file for Customer/Vendor List for Italy

Hi All,
We are facing problem while uploading the .xml file in DMEE transaction for the new Customer/Vendor List for Italy.
We have followed the entire process given in the OSS Note(1090857).
We have SAP 4.6c and followed the below steps:
1. Created ID-FI-IT Development class
2. Added domains
3. Added Data elements
4. Tried to upload the given .xml file and got any error saying ".xml file could not be interpreted".
Also there is a .SAR file mentioned to upload if we receive any errors while uploading .xml file.
Tried uploading the .SAR file also. STill we are recieving the same Error.
Can any one of you help us out.
Thanks in Advance.
Ramesh

Ok, we upload .SAR file in this way:
1. unpack .SAR file with SAPCAR.EXE program. Yuo obtain 2 files
R492445.P9C and K492445.P9C
2. put K492445.P9C in directory \SAPMNT\TRANS\COFILES and put R492445.P9C in directory \SAPMNT\TRANS\DATA of your system (DEV, TST or PRD)
3. Use Tx STMS. If You want create DMEE tree in DEV system, go to DEV import queue. Choose menu Extras | Other requests | Add. Insert P9CK492445 in Transp. request field.
4. Import the request. This creates the DMEE tree. You don't need ti upload XML file after. You can see the DMEE tree created with Tx DMEE and inserting
Tree type UMS1
Format tree IT_CUST_VEN_LIST
5. after continue follow the note
I hope this help you
Roberto

"update rules inactive " error when importing transport request

Hi experts,
I am stuck while importing transport request of update rules. I am moving transport request of update rules from 1 system to another and stuck while importing it in 2nd system. Only two update rules are stuck among all giving an error of "inactive update rules".
I have again tranported it twice after activating theose two update rules.
Please help!!!!!

Hi Heena,
Can you provide more details of the issue like is it a DSO to DSO transformation, error message etc.

UCCX 8.0.2 - error while handling the request

Hi Guys,
My Customer have UCCX 8.0.2. He needed did change prompt and when He try to do upload the new script, appear the message: "error while handling the request". Any have idea who solve this problem?
Thanks,
Wilson

I saw this before on 8.0.2, I had to delete the prompt/script/document and the upload it again (instead of overwriting it). I believe this was fixed in SU4.
Edit: this is the bug id - CSCtq23837 (unable to overwrite scripts) - resolved in 8.0(2) SU4
Brian
Please rate helpful posts

Error while releasing a request.

Hi All,
I'm facing an error while releasing a request.
The request contains an ABAP programs along with two INCLUDDE programs as well as a TCode to run the same.
It is running successfully in dev. server. But, while releasing ths request it shows me the following error :
" Object REPT ZBAPI_SD_SERV_SALES_ORDER is inactive " ,
where ZBAPI_SD_SERV_SALES_ORDER is the program name. When I checked out in ABAP editor it shows the program active.
But, I'm unable to understand why its showing me an inactivation error.
Guys, help me out in this.

Hi,
Check if the INCLUDE program are also ACTIVE. They must be in inactive state. Try activating them and release the request.
Regards,
Vikranth

Error while uploading Transport request

Similar Messages

Maybe you are looking for