Error while upoloading document

In cProjects 4.0, I have tried to upload the document to a document template. I have followed the following steps
1) I have installed Java Plug in
2) I have trusted the Applet from SAP
3) On uploading the document, I could pickup the file from my PC. But on attaching the file the screen is closing off.
I have verified in Java Console Log and found the error message like
start(): Error requesting permissions: java.lang.ClassNotFoundException: com.ms.security.PolicyEngine
Can you pls guide me on this error

hi ramakrishna...
i dont know abt cproject ver 4.0 but i had faced a similar problem wen using cpr 3.1. whenever i tried to upload a file using the java applet cpr used to get "hang".
i had disabled the java applet by going to settings and removing the tick mark.
by doing so u will get a simple browse button in the documents tab and u will be able to upload the files.
but u will not be able to use checkin and checkout facility....u will have to manualy upload the file after making changes to it.
try it out and let me know if it helps u.

Similar Messages

Error while uploading document in Primavera portfolio management

Dear All,
I am getting error while uploading document with particular user in PPM
Error occur when I upload document and click on save button.
Error from log :
&ltException&gt
System.InvalidCastException: Specified cast is not valid.
   at ProSight.Portfolios.Infrastructure.Database.IpsDataRow.getInt(DataColumn iColumn)
   at ProSight.Portfolios.BusinessLogic.Infrastructure.Objects.psLinkObj.addNew(Int32 iUserID, Int32 iPortfolioID, Boolean isPortfolioLink, IpsDataTable iLinkRec)
   at ProSight.Portfolios.BusinessLogic.TS.TransactionalScenario.psTSTabset.update(Int32 iUserID, Int32 iFormsetID, Int32 iPortfolioID, Boolean iIsImmediate, psResultContainer iParam)
&lt/Exception&gt
</Trace>
<Trace Type="Error" Time="1/31/2015 1:44:36.758" class="psTransactionalScenarioInterface" Method="handleException" Process="w3wp.exe (4236)" Client="">
Error in psTSFormset.update
&ltException&gt
System.InvalidCastException: Specified cast is not valid.
   at ProSight.Portfolios.BusinessLogic.TS.TransactionalScenarioInterface.psTransactionalScenarioInterface.invokeTS(String className, String methodName, Object[] parameters, Int32 maxRetries, Int32 minRetryWait, psResultContainer containerToClean, Boolean iDisableTransaction)
&lt/Exception&gt
</Trace>
<Trace Type="Error" Time="1/31/2015 1:44:36.758" class="Transaction" Method="handleException" Process="w3wp.exe (4236)" Client="">
Unhandled Error GUID: a3640801-43cb-48d4-89b4-cede50780e47 \"File name: /Prosight/forms/saveForm.aspx\\nStack trace:    at ProSight.Portfolios.BusinessLogic.TS.TransactionalScenarioInterface.psTransactionalScenarioInterface.handleException(Exception iEx, String iAddionalMsg)\\r\\n   at ProSight.Portfolios.BusinessLogic.TS.TransactionalScenarioInterface.psTransactionalScenarioInterface.invokeTS(String className, String methodName, Object[] parameters, Int32 maxRetries, Int32 minRetryWait, psResultContainer containerToClean, Boolean iDisableTransaction)\\r\\n   at ProSight.Portfolios.BusinessLogic.TS.TransactionalScenarioInterface.psTransactionalScenarioInterface.invokeTS(String className, String methodName, Object[] parameters, Int32 maxRetries, Int32 minRetryWait, psResultContainer containerToClean)\\r\\n   at ProSight.Portfolios.BusinessLogic.TS.TransactionalScenarioInterface.psTSITabset.update(Int32 iUserID, Int32 iDashboardID, Int32 iPortfolioID, Boolean iIsImmediate, psResultContainer iParam)\\r\\n   at ProSight.Portfolios.Server.Presentation.Logic.Forms.psPLForms.update(psResultContainer iResultContainer)\\r\\n   at invoker137.Invoke(Object , Object[] )\\r\\n   at Microsoft.JScript.JSMethodInfo.Invoke(Object obj, BindingFlags options, Binder binder, Object[] parameters, CultureInfo culture)\\r\\n   at Microsoft.JScript.LateBinding.CallOneOfTheMembers(MemberInfo[] members, Object[] arguments, Boolean construct, Object thisob, Binder binder, CultureInfo culture, String[] namedParameters, VsaEngine engine, Boolean& memberCalled)\\r\\n   at Microsoft.JScript.LateBinding.Call(Binder binder, Object[] arguments, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParameters, Boolean construct, Boolean brackets, VsaEngine engine)\\r\\n   at Microsoft.JScript.LateBinding.Call(Object[] arguments, Boolean construct, Boolean brackets, VsaEngine engine)\\r\\n   at ASP.forms_saveform_aspx.main()\\nError code: -1\\nError Reason: Specified cast is not valid.\\n\\n\", \"/ProSight\"
</Trace>
<Trace Type="Error" Time="1/31/2015 1:44:47.584" class="psException" Method="printException" Process="w3wp.exe (4236)" Client="">
Could not update form data
USERID: 422
DEADLOCK DETECTED: False
Kindly help.

Hi,
chk ur authorizaion errors... su53 dump.
Thx,
waseem

Error while uploading document to service desk ticket

Hi all,
I get error while uploading document to ticket
Message No: SKWF_SDOKERRS119 .
If iam correct I have given all the required authorisation mentioned in security guide.
what could be the reason for this kind of behaviour
Best Regards,
Alok

hi
what is your solman version? chk the sap note
[ Note 1401196 - Work Centers: attachment not saved in Incident Management|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1401196]
might be this helps,
[Message No: SKWF_SDOKERRS119|Message No: SKWF_SDOKERRS119]
jansi

Error while converting document to html

"ORA-06502: PL/SQL: numeric or value error: invalid LOB locator specified: ORA-22275"
I use the procedure to convert the documents if it is not already converted before using procedure as follows
PROCEDURE "STARDOC"."HTMLOUTPUT" (
"DOCID" IN NUMBER) IS
mklob clob;
doccount number;
errorcode number;
errormessage varchar2(200);
BEGIN -- executable part starts here
SELECT COUNT(document_id) INTO doccount FROM docviewhtml where document_id=docid;
--dbms_output.put_line(doccount);
if doccount=0 then
     dbms_output.put_line('Document Not Found: Converting '||docid);
     --If document is not found run document coversion routine
     ctx_doc.filter('idxdocuments',docid, mklob,FALSE);
     INSERT INTO docviewhtml(document_id, html) VALUES (docid, mklob);
     COMMIT;
elsif doccount=1 then
     --return;
     dbms_output.put_line('Document Found');
     --if document id found then return the document content
     null;
else
     --dbms_output.put_line('Error occured');
     --need to deal with duplicate documents
     null;
end if;
dbms_lob.freetemporary(mklob);
EXCEPTION
--rollback when an exception occurs
     WHEN OTHERS THEN
          errorcode:=SQLCODE;
          errormessage:=SQLERRM;
          dbms_output.put_line(sqlcode || ':' ||sqlerrm);
          ROLLBACK;
          LOGERROR(errorcode,errormessage);
END "HTMLOUTPUT";
i get the error when i convert large documents
"ORA-06502: PL/SQL: numeric or value error: invalid LOB locator specified: ORA-22275"
Also if there are any converion errors while converting documents to html. how to find them is there a log o fany sort.
what is wrong. please help!
Message was edited by:
connect2sandeep

You free your temporary lob, but never create it.

Error while billing document releasing to accounting.

Hi Experts,
Please give me possible reasons for below error while billing document releasing to accounting.
"Valuation with material cost estimate: error with product "500258045"
Message no. KE350
Diagnosis
In Profitability Analysis (CO-PA), the system tried to valuate a line item using the current standard cost estimate.
In order to determine the current plan period, the system needs to read the valuation segment of the material master.
The system has found that the current plan period is not filled forproduct "BDE98561002" in plant "9856".
Display material (View: Costing)
The system looked for the material cost estimate using costing key "ZK1", as defined in the Customizing settings for CO-PA.
System Response
The document cannot be processed.
Procedure
Contact your system administrator".
I have checked CKR1 transaction there were no cost estimates with KF costing status.
NOTE: Material Ledger Activated.
Please suggest the possible reasons and what to check?
Regards
Chandra.

Check the cost estimate that is mentioned against the Costing key ZK1 whether it exists in the system and as you are saying there seems to be no cost estimate for the said material.
Hence release the std cost estimate for the said materia using CK11n or CK40n

'error while signing document'

i got this error ('error while signing document') on my 1st attempt to use the service. simple 4 page PDF, no doc. security, same error both b4 & after i edited my user profile (i filled in the missing details & changed the default signature image).
cheers,

Hi,
I am also getting this error while attempting to sign a document. I have checked the first and name fields in my default signature profile for any non-English characters but I am still getting this error. I have also tested with a different signature profile with same results. Please advise if there are
other fields I need to check.
Thanks.

Error while loading document when user executes IW32

we have brand new laptops and desktops installed SAP GUI 6.40 patch level 27 and microsoft office 2003.when the user tries to execute IW32 and click on the long text button.when we try to change the editor it is giving ERROR WHILE LOADING DOCUMENT
ERROR WHILE LOADING DOCUMENT
message no .sofficeintegration142
DIAGNOSIS
An internal error occured in the SAP Document Container Control while loading a document
PROCEDURE
If the error recurs,enter a problem message.There are notes relating to how to create the log file using the report SAPROFFICEINTEGRATIONTRACE1

Hi Rajanarenderreddy,
Were you able to resolve your problem?
If so how? We have a customer that is experiencing the same problem.
Thank you for your feedback.
Br,
Tom.

Error While Genrating Document in ADOB Form

Hello Everybody ,
When I used SFP tcode for Design ADOB Form Layout I am getting Error " Error While Generating Document " .
Plz Sugget me how to resolved it ...
Regards,
Sandeep Jadhav

Hi,
You need additional License to create SAP Interactive Forms by Adobe
Check the SAP Note No. 750784
If you already have got the License then please check the below link and see if it helps you.
http://help.sap.com/saphelp_nw70/helpdata/en/37/504b8cbc2848a494facfdc09a359b1/frameset.htm
Let us know if this information is useful to you.
with regards,
Parin Hariyani

Error while Posting Document in FBV0

Hi Guys,
Iam getting following error while Posting Document in FBV0 which is already parked and it is with tax code.
Error: "No batch input data for screen SAPMF05A 0700"
Kindly suggest
Thanx and Regards
Munender

Also have a look at the following notes:-
=> Note 26050 - FIPP:Posting not poss. (SAPMF05A,0700,batch input)
=> Note 800177 - FB01: No batch input data for SAPMF05A 0700
thanks
G. Lakshmipathi

WS And Web Dynpro: Error while processing document security

Hi all,
We have a problem when use Web Services (stateless session bean) in Web Dynpro.
When two users calls the same web dynpro in the same time we have this error:
Errore in: it.sap.mdm.pdcmodelcomponent.wdp.InternalLookUpModelController getLookUpTable:
Class___: com.sap.tc.webdynpro.model.webservice.api.WDWSModelExecuteException Additional Info:
Message_: Exception on execution of web service on destination 'FS_MDM_PDC' for operation 'getLookupTable' in interface 'ZMDM_FS_PDCVi_Document'
Causa__:
Error while processing document security. The error was class com.sap.engine.frame.core.configuration.ConfigurationException Configuration webservices/proxies/sap.com/ mapping is not valid - configuration is closed.. See trace entry [no trace for com.sap.security.core.client.ws.DeployableSecurityProtocol (severity above PATH)].; nested exception is: com.sap.engine.services.webservices.jaxrpc.wsdl2java.ClientProtocolException: Error while processing document security. The error was class com.sap.engine.frame.core.configuration.ConfigurationException Configuration webservices/proxies/sap.com/ mapping is not valid - configuration is closed.. See trace entry [no trace for com.sap.security.core.client.ws.DeployableSecurityProtocol (severity above PATH)].
If I call the same web dynpro ,without other user, it's ok.
Where is the problem?
I have to congigure some parameter in J2ee???

Hi
Use this pdf to implement Mutual Exclusion
http://java.sun.com/developer/Books/performance2/chap3.pdf
http://navet.ics.hawaii.edu/~casanova/courses/ics432_fall08/slides/ics432_jmonitors.ppt#313,10,Synchronizing on Multiple Objects
thanks

Error While Posting documents using F-28

Dear Friends,
While posting Documents using 'F-28' after I passed posting key and account number I m getting the Error
'Entry not Possible'. Can anyone tell what may be the problem how to clear this error.
Regards
Balamurugan N
Moderator message: duplicate post locked, follow up on your previous one instead of opening a new thread for the identical problem.
Edited by: Thomas Zloch on Apr 26, 2011 8:34 PM

Hi,
I Guess this error is occuring because of the posting key and account number (Account type) combination is not correct. For each account type a perticular posting is is defined for debit and credit entries.
Check with your functional the correct posting key for account type and account number you are using.

Error while creating Document Templates

Hi Experts,
Am getting an ActiveX error while trying to create a document template designer using a webservice I created in the WST. I have consulted note 1018674 and ensured that the following browser settings are activated but still I keep getting the error.
- Active Scripting
- Run Active X Controls and plug-ins
- Initialize and script ActiveX controls not marked as safe
Also, since I had been trying to create a microsoft word type of template the system does open an instance of the word doc. Can anyone pls advice?
How can we ensure that the webservice we have created is working. When I try to test the service in the WST tool, I keep getting the message - URL cannot be retrieved. Does it mean that the service has not been created correctly?

Check if you done all the following settings...
.NET Framework-reliant components:
○     Run components not signed with Authenticode ® Enable
○     Run components signed with Authenticode ® Enable
ActiveX controls and plug-ins:
○     Download signed ActiveX controls ® Enable
○     Initialize and script ActiveX controls not marked as safe ® Enable
○     Run ActiveX controls and plug-ins ® Enable
○     Script ActiveX controls marked safe for scripting ® Enable
Downloads:
○     File download ® Enable
Miscellaneous:
○     Installation of desktop items ® Disable
Scripting:
○     Active scripting ® Enable
○     Allow paste operations via script ® Enable
○     Scripting of Java applets ® Disable
●     To enable groupware integration, adjust the browser settings under Tools ® Internet Optionsu2026 ® Security ® Custom Levelu2026 as follows:
ActiveX controls and plug-ins:
○     Download unsigned ActiveX controls ® Prompt.
○     Initialize and script ActiveX controls not marked as safe ® Enable
○     Run ActiveX controls and plug-ins ® Enable

Error while creating document numbering series via SDK add on

Dear Experts,
We receive the following error while creating the document numbering series through the SDK add on
[Microsoft][SQL Server Native Client 10.0][SQL Server]The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Too many parameters were provided in this RPC request. The maximum is 2100.
From the above error message I can suspect the following possibilities
1. The limit for the document numbering must be less or equal to 2100.
2. There is a problem in the coding in SDK where it does not allow more than 2100 lines in the database.
We tried to create manually for the same fiscal year and period indicator disconnecting the add on, the same error occured.
Then we created a seried for a single document with the period indicator for the next fiscal year, it allowed.
After creating the document numbering for the next fiscal year, we were able to create the numbering for the previous year also.
Kindly help us on how to solve the same.
With regards,
Yeshwanth Prakash

Hi
You have, as far as i can determine without seeing the template,defined no Part Appraiser Column (PAPP) in your template. But you have defined a function on the template to automaticly default the part appraisers.
On the Appraisal document persons (appraiser / appraisee) are getting defaulted as part-appraisers although no part appraisal column excist,and therefor 00 Part Appraisers are allowed. This gives the error. Remove the Part Appraisers default functionality from the template and this problem will be solved.
FYI: The reason why this doesn't give a business check error is that the functions to default participants are BAdI's and we have no means of determining wether or not a BAdI implentation will create an inconsistency on the appraisal document.
Also, the reason that it occurs as a S message and not as E or W is because of programming restrictions in combination with messages. All errors on the Appraisal Document will come as 'S' messages.

Error while creating Documents in WPC

Hi All,
I am trying to create a form using an article template in Web page composer (NW 7.3). When i save the form keying in the required details I get an error saying "Error while saving the document" . This is what i found in Log files and have not been able to find out what is going wrong.
I have all the required roles but still the form saving doesn't happen.
Please help.
#2.0 #2011 12 30 19:44:04:495#+0530#Error#com.sap.nw.pcc.editor.EditorTool$EditorToolDynPage#
#EP-PIN-WPC-WCM#sap.com/com.sap.nw.pcc.xmleditor#C000AC10D25D11BE0000000100001CE4#1581950000000004#sap.com/com.sap.nw.pcc.xmleditor#com.sap.nw.pcc.editor.EditorTool$EditorToolDynPage#hussain.s#771##2EBA27FD32F011E1A35300000018237E#84d32d4332f011e18d6700000018237e#84d32d4332f011e18d6700000018237e#0#Thread[HTTP Worker [@1002771266],5,Dedicated_Application_Thread]#Plain##
PCC exception while saving a document: Unable to authenticate request!XSRF token is not valid.
[EXCEPTION]
com.sap.nw.pcc.km.service.editor.EditorException: Unable to authenticate request!XSRF token is not valid.
     at com.sap.nw.pcc.editor.EditorBean.saveDocument(EditorBean.java:468)
     at com.sap.nw.pcc.editor.EditorTool$EditorToolDynPage.onSave(EditorTool.java:523)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sapportals.htmlb.page.DynPage.doProcessCurrentEvent(DynPage.java:173)
     at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:106)
     at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:134)
     at com.sap.nw.pcc.editor.EditorTool.doContent(EditorTool.java:131)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:205)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:121)
     at com.sap.portal.prt.core.RequestDispatcherFactory$PortalComponentRequestDispatcher$5.service(RequestDispatcherFactory.java:308)
     at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:270)
     at com.sap.portal.prt.core.RequestDispatcherFactory$PortalComponentRequestDispatcher.service(RequestDispatcherFactory.java:298)
     at com.sap.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:229)
Thanks
Hussain

Hi Andrea,
Please try below fix and check if this works for you. This solution has worked for us.
Logon to NWA, and navigate to Configuration->Infrastructure->Java System Properties.
Open Java System Properties and select the Instance and choose Show advanced properties.
In the Details Section, switch to services tab and search for web container.
Select the Web Container and in the properties serach for the string "XSRF".
choose the property "xsrf.protection.enabled" . This property is set to true by defualt. Change it to false, save and restart portal.
Then try saving WPC Forms
Hope this helps.
Thanks
Hussain

Getting error while opening document in SharePoint 2010

Hi,
I got the below error while opening a document in SharePoint library.
"The document could not be opened for editing. A Microsoft SharePoint Foundation compatible application could not be found to edit the document."
Please help me to resolve.
Krishnasandeep

Hi,
According to your post, my understanding is that you got the error while opening a document in SharePoint library.
The issue can occur when you have several different versions of Office installed on the same computer and you have
several different versions of the OWSSUPP DLL available which are not registered correctly.
To resolve this issue you should disable Microsoft SharePoint Foundation Support in any other version of Office installed on the machine and then repair Office.
For more information: you can refer to:
You get an error message when you open an Office file from SharePoint on a computer on which you installed more than one version of Office
In addition, please ensure that you are using Internet Explorer (32 bit) not the Internet Explorer (64-bit).
Please Verify the “Sharepoint OpenDocuments Class” addon is installed and enabled. If it is not reinstall Office.
Please refer to:
Solved: The document could not be opened for editing. A Microsoft SharePoint Foundation compatible application could not be found to edit the document.
And, if the Office tools can’t install correctly will also cause the error.
Here is a thread about this issue, you can check it. The replies include most of the possible reasons and gave the solutions.
http://social.msdn.microsoft.com/Forums/en-US/06a4943a-5150-44c5-ae6b-3354c85396f5/the-document-could-not-be-opened-for-editing-a-microsoft-sharepoint-foundation-compatible
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Error while upoloading document

Similar Messages

Maybe you are looking for