Error while using BAPI BAPI_GOODSMVT_CREATE for Momvent type 321

Hi Guys,
We trying to transfer material from Inspection to Un.Stock by using momvent type 321...In SAP we do QVM1 and do stock postion.
We are using BAPI BAPI_GOODSMVT_CREATE getting this error " E QA 495 Change the inspection stock of material 11036125 in QM only".
Any one have any idea how to overcome this issue.
Atul

Hi Sachin,
Pass the Item Number of Reservation to GOODSMVT_ITEM-RES_ITEM .
Regards
DKS

Similar Messages

Getting error while using BAPI 'BAPI_GOODSMVT_CREATE'

Hi,
I am using the BAPI 'BAPI_GOODSMVT_CREATE' in program for goods issue i.e code 03.I am providing all details. the quatity is in KG and i am also providing ISO code i.e KGM but still getting error that Deficit of BA Unrestricted-use 32,900 KG .what would be the problem.

Hi There,
Please check if the PO in question has GR-based IV set to active. In this case please refer to the SAP note 109396 which explains how the IDoc segment has to be filled in order for the posting be successful. The IDoc has to be filled as described in the note when try to post with this particular constellation (i.e. GR-based IV active, more than one goods receipt for the line item, first goods receipt already reversed). Normally when posting in dialog the user has to choose the correct line item to reverse. In the case of IDoc/BAPI processing this is not possible so these particular fields have to be filled at the interface so that the system finds the correct document to reverse.
I hope this helps,
Best Regards,
Elaine.

Error while using BAPI to create Goods Receipt Document

Hello All,
While using the bapi BAPI_GOODSMVT_CREATE to create Goods receipt document ,the following error is encountered:-
Error Message:FOR OBJECT XABBELEGNR,NUMBER RANGE INTERVAL DOES NOT EXIST OM36.
Do we need to create a number range object ??If yes,how and where to create ?
Thanks,
Deepti.

Hi Deepti!
There is only a valid interval missing, not the whole object.
Maintenance can be done via transaction SNRO, enter your object XABBELEGNR in entry screen. (Alternatively use transaction OMJ6).
Push button 'Number Ranges' and 'Change Intervals'. Here you can define an interval.
Regards,
Christian

Error while using bapi BAPI_INCOMINGINVOICE_CREATE to post MIRO

Hi Friends,
         Im using bapi BAPI_INCOMINGINVOICE_CREATE to post MIRO.
         im passing data to table GLACCOUNTDATA.
         Below are the table fields im paasing
     INVOICE_DOC_ITEM " '000001' deafault always
     GL_ACCOUNT "Which is constant for all in my case
     ITEM_AMOUNT      " Total PO net amt + Frieght charges header level
     DB_CR_IND      " 'S' always default
     COMP_CODE      " 'RPPL' always default
     TAX_CODE      " 'V0'     deafault always
     PROFIT_CTR       " for ex 1100180. based on plant
          While posting this bapi is trhrowing error as below
     'profit centre RPPL/1100180 does not exist for 01.12.2008'
     where 01.12.2008 is the MIRO posting date which im passing in header.
        We checked dates for profit centres they are correct.
        Awaiting the reply ASAP.
Regards,
Venky

Hi,
It would be better if you do a recheck on data input for BAPI. If you sure the data are ok but the BAPI still gives error message, then I suggest to post to OSS.
Regards,
Teddy Kurniawan

Error while using BAPIs that deals with DMS

Hi everybody,
We are developing a portal with Web Dynpro and trying to call from our java code BAPIs that deals with DMS:
BAPI_DOCUMENT_CREATE2 - to create a new DMS document and checkin an original.
CVAPI_DOC_CHECKIN - to checkin an original to an existing DMS document.
CVAPI_DOC_CHECKOUT - to checkout an original from the DMS.
While using other bapi's that deals with DMS but do not deals with originals (like creating a new document, retrieving metadata about documents and originals) we don't have any problem.
Only when trying to checkin or checkout originals we get the following message (from the DMS?): RFC_START_PROGRAM
the full message is: com.sap.aii.proxi.framework.core.BaseProxiException:RFC_START_PROGRAM error key:RFC_ERROR_PROGRAM.
does anybody knows the meaning of this message?
by the way - those BAPIs works well while called from the R/3. only when we call them from the portal we have this problem.
thanks for any information, Adi.

Hello,
BTW, You have BAPIs for Doc. checkin and checkout.
BAPI_DOCUMENT_CHECKIN
BAPI_DOCUMENT_CHECKIN2
BAPI_DOCUMENT_CHECKOUTSET
BAPI_DOCUMENT_CHECKOUTSET2
Can you use these and give a try?
You have a detailed documentation maintained for these BAPIs.
Hope this helps you.
Best Regards, Murugesh AS

Reg : I am getting an error while Using MicroSoft ODBC For Oracle Driver

I am Using MicroSoft ODBC For Oracle Driver for JDBC. Why i am using this driver is i could not able to get the arabic content if i use the other driver .I Right now i cannot change the NLS Lang because its a production server also it has around 300 gb of data and i can not take risk now by changing the NLS lang.. coming to the below error .i could able to access my data up to 4 Hours after that i am getting this error.If i restart my tomcat i can use my application one more 4 hrs .Please get back to me if u have any solution.Its very very helpful to me......+*
[java.sql.SQLException] [ Microsoft ODBC for Oracle ]
at sun.jdbc.odbc.JdbcOdbc.createSQLException(JdbcOdbc.java:6957)
at sun.jdbc.odbc.JdbcOdbc.standardError(JdbcOdbc.java:7114)
at sun.jdbc.odbc.JdbcOdbc.SQLDriverConnect(JdbcOdbc.java:3073)
at sun.jdbc.odbc.JdbcOdbcConnection.initialize(JdbcOdbcConnection.java:3
23)
at sun.jdbc.odbc.JdbcOdbcDriver.connect(JdbcOdbcDriver.java:174)
at java.sql.DriverManager.getConnection(DriverManager.java:582)
at java.sql.DriverManager.getConnection(DriverManager.java:185)
at com.iton.eoffice.DatabaseBean.connecteOfficeMoEnq(DatabaseBean.java:4
60)
at org.apache.jsp.MhewProfilesearchMoEnq_jsp._jspService(MhewProfilesear
chMoEnq_jsp.java:434)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:98)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper
.java:384)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:3
20)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
ilterChain.java:206)
at com.iton.eoffice.tree.CharacterEncodingFilter.doFilter(CharacterEncod
ingFilter.java:63)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
ilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperV
alve.java:228)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextV
alve.java:175)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j
ava:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j
ava:104)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal
ve.java:109)
at org.apache.catalina.ha.tcp.ReplicationValve.invoke(ReplicationValve.j
ava:347)
at org.apache.catalina.ha.session.JvmRouteBinderValve.invoke(JvmRouteBin
derValve.java:209)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.jav
a:212)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java
:844)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.proce
ss(Http11Protocol.java:634)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:44
5)
at java.lang.Thread.run(Thread.java:619)
------------1234-----------
java.lang.NullPointerException
at com.iton.eoffice.DatabaseBean.getSQLRows(DatabaseBean.java:764)
at org.apache.jsp.MhewProfilesearchMoEnq_jsp._jspService(MhewProfilesear
chMoEnq_jsp.java:435)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:98)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper
.java:384)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:3
20)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
ilterChain.java:206)
at com.iton.eoffice.tree.CharacterEncodingFilter.doFilter(CharacterEncod
ingFilter.java:63)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl

<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by sreenivas navuluri:
Oracle(tm)Client and networking components not found. These components are supplied by Oracle Corporation and part of Oracle Version 7.2 or greater Client software installation. You will be unable to use this driver until these components have been installed . This error occurs while selecting the Microsoft Odbc for Oracle driver from the ODBC in control panel. Pls suggest<HR></BLOCKQUOTE>
null

Error while using Noetix Generator for OBIEE 11.1.1.6.8

Hi Gurus,
We are trying to implement Noetix views for OBIEE 11.1.1.6.8 using Noetix generator for oracle business intelligence,, but we are facing below error..
Please help, thanks in advance.
" *Validation encountered following warnings..*
*Could not verify server version. Double check that your server version matches the target specified.*
*Cause: access denied for user to path /system/version*. "

Hi,
I'm the Director of Engineering at Noetix that is responsible for Noetix Generator for OBIEE.
Noetix Generator utilizes OBI's web services in order to validate that your OBI admin client and server have matching versions. The validation error you're seeing appears to be caused by a permission issue while accessing the "/system/version" folder of your web catalog through that web service.
One thing you could check is the OBI account you're using in Noetix Generator to access the BI Server. That account should have administrative privileges in OBI.
I also noticed that you're attempting to use OBI 11.1.1.6.8, which we don't currently support. Your existing version of Noetix Generator may work with it, but we won't claim official support until we certify our generator against it. That will come in a future release.
Please contact Noetix Support at http://support.noetix.com if you need additional information. Our support staff can assist you in resolving this issue.
Thanks,
Jay Shipley

Access Denied Error while using Cancel Command for an Administrator.

Hi All,
We have created a new capability called Task Administrator which has only one permission <Permission type='TaskInstance' rights='View'/>.
Now when a user who is assigned ONLY this capability clicks a cancel button in the end user interface (<Property name='command' value='Cancel' />), an error is thrown (Error: List access denied to Subject on type WorkItem. com.waveset.ui.util.html.Container: method setSubTitle(LJava/lang.Object;)V not found.
We understand that the system is trying to delete the workitem created (I can see the workitem from the debug menu) which he/she does not have access. Interestingly, a normal end user without any capabilities is able to cancel this request.
Could someone please tell me what the default access is for an end user which is taken away when a new capability is added to that user?
We are using V5 Sp4.
Thanks for your help.

Hi,
Based on the current information, I suggest that you try the following steps:
1. Run REGEDIT command to open the registry editor, navigate to HKEY_CLASSES_ROOT\CLSID\{09beb4fe-6125-4757-af0f-7f487d1aa125}.
2. Expand this node to see if there is a folder named “InprocServer32”, if there is, move to step 3.
3. Click the “InprocServer32” folder, and double-click the “(Default)” key to check its value. It should be the path of a DLL file.
4. Grant “Full control” to the users on this DLL file or its parent folder.
If it doesn’t work, I suggest that you configure the Advanced Security Settings of the SQL Server installation folder, and check the “Replace child object permissions with inheritable permissions from this object” option.
Reference:
http://www.techrepublic.com/blog/how-do-i/how-do-i-change-access-permissions-for-all-folders-and-files-in-vista/
Regards,
Mike Yin
TechNet Community Support
I have already mentioned in my question that the registry location was not there in that PC.
So the result from process monitor does not help me to solve the problem

Error while using BAPI AMDP_BAPI_CALL_ON_TRANSFER

Hi,
I am using the BAPI AMDP_BAPI_CALL_ON_TRANSFER for inter company asset posting.
The sy-subrc is zero but the return table(bapiret2) is empty and is not returning any values.
Please advise what can be the possible reason for this and how to rectify this.
Please help
Regards,
Pooja.

hii
check whether you are passing on the right parameters.Check the bapi documentation properly. Hope this helps.
regards

Error while using BAPI for F-47 posting.

Hi,
I am using the BAPI - 'BAPI_ACC_DOCUMENT_POST' to do a Down Payment Request Posting (F-47).
Since this is a single line posting, BTE RWBAPI01 was implemented as given in the below link.
[Re: BAPI or Function Module for F-47 (Down payment request)]
Inside the BAPI i have passed details in tables :account payable , currency amount & extension1.
However i get the error " Balance in transaction currency".
Please let me know if i need to pass any other details. Also what is the exact data that needs to be passed to extension table?
Thanks,
Meera

hi ,
check this threads
Check these threads
Balance in transaction currency
Balance in Transaction Currency
error in Balance in transaction currency
error in Balance in transaction currency
Balance in Transaction Currency
Balance in transaction currency
if this could help .
Regards
Deepak.
Edited by: Deepak Dhamat on Oct 19, 2010 11:21 AM

Getting an error while using BAPI for data upload using FB50

Hi,
Can someone please help with the error below :
To Upload Data Using FB50 , am using 'BAPI_ACC_DOCUMENT_POST' FM
and passing values as
obj_type = REACI
obj_KEY = '$'
obj_sys = t000-logsys
getting errors errors in return as
'Error in document: REACI $ R3_AFRICA
G/L account 2511510 is not defined in chart of accounts CSGP(though the account exists in the COA)
Control indicators for controlling area EU01 do not exist'.(we have not input any indicators)
Thanks

Control indicators for controlling area (t-code OKKP ) is a primary configuration before the company is set to production. Here we maintain which sub areas of controlling are activated. Have a look at those settings.
Check the validity of the accounts/cost element in the KA03 to ensure the cost element is valid on the date of transaction.
What is the error message number?

Getting error while Using BAPI Interface in VB

Hi,
I m getting error message while creating object of SAP.BAPI.1
Error message is "out of memory : run time error 7".
do I need to install any patch to my local PC? If yes then from where could i get that patch.
Plz help me out.
Thanks & Regards,
Sagar

Hi Sagar,
Please varify the version of SAP client you use. I have noticed that this error with SAP Frontend Package 6.20, and was able to over come the follwing issue by upgrading to the SAP Frontend Package 6.40.
Regards,
Randima

Getting the error while using bapi 'BAPI_PROJECTDEF_UPDATE'.

Hi,
All
To fulfill a requirement of project definition update in PS module, I have been trying with bapi 'BAPI_PROJECTDEF_UPDATE' , but I am getting the error like 'The external key is not compatible with the internal key'.
Following are the details of my source code:
CALL FUNCTION 'BAPI_PS_INITIALIZATION'
   data: ls_def_strucure LIKE BAPI_PROJECT_DEFINITION,
       ls_def_update LIKE BAPI_PROJECT_DEFINITION_UP,
       ls_error like bapireturn1.
ls_def_strucure-PROJECT_DEFINITION = '11011'.
ls_def_strucure-DESCRIPTION = 'Indian Metro Updated by BAPI'.
ls_def_update-DESCRIPTION = 'X'.
CALL FUNCTION 'BAPI_PROJECTDEF_UPDATE'
   EXPORTING
     currentexternalproje          = '11011'       " Project Definition
     currentinternalproje          = '11011'
     project_definition_stru       = ls_def_strucure
     project_definition_up         = ls_def_update
IMPORTING
    RETURN                        = ls_error
* TABLES
*   E_MESSAGE_TABLE               =
CALL FUNCTION 'BAPI_PS_PRECOMMIT'.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
I have tried with 'BAPI_PROJECT_MAINTAIN' ,but there I am not getting any idea to usage of this bapi.
please help me if you have any solution for this problem.
Thanks in advanced.

Thanks for your quick reply
Actually i have a requirement to update the Project definition and other Project elements like WBS, Network , Activities and Milestone. I referred several documents and came to know that 'BAPI_PROJECT_MAINTAIN' can perform these all update tasks. But tried with that bapi but got the error. First help me please if you have any idea about this BAPI .
Coming to BAPI_PROJECTDEF_UPDATE I got the error like Internal and exrternal keys are not type compatible with each other.
So , do you have any idea what would be the exact value of these two parameters.

Error while using Mail Package for dynamic email address - XMLScanException

Hi All,
i am trying to implement File_to_Mail Scanrio. Here i am using mail package stuff to make use the dynamic mail Id's. i am following the blog /people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address. i have finished all the settings as per the blog but it throwing the following error
failed to send mail: com.sap.aii.messaging.util.XMLScanException: expecting start tag: Mail, but found Mail at state 1
Please help me to resolve this error.
Thanks in advance
-Siva
Edited by: Siva Ram on Jan 18, 2008 7:43 AM
Edited by: Siva Ram on Jan 18, 2008 7:43 AM
Edited by: Siva Ram on Jan 18, 2008 7:44 AM
Edited by: Siva Ram on Jan 18, 2008 7:44 AM
Edited by: Siva Ram on Jan 21, 2008 5:59 AM

Hi Siva
check with these threads discuss the same XMLScanException
Mail adapter fails when using Mail Package Format
Error in E-mail Adapter - Message protocol XIALL
Mapping Error with mail package
Error in Mail Adapter
See the below links also
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
Error in Mail Adapter
Mapping Error with mail package
Regards
Abhishek

Error while using startcmd.sh for OdiExportScen in ODI 11g

Hi,
I have upgraded ODI 10g to ODI 11g.
I have a package wherein I have defined a procedure which has the following jython code for export of scenarios to ODI server.
import os
scen='#DEPLOYMENT.PVV_GET_SCN'
scen_name=scen[5:-7]
scen_ver=scen[-7:-4]
file_name='/soaap/ODI_HOME/Scenarios/#DEPLOYMENT.PVV_GET_SCN'
odiscen="/soaap/ODI_HOME/oracledi/bin/startcmd.sh OdiExportScen -SCEN_NAME="+scen_name+" -SCEN_VERSION="+scen_ver+" -FILE_NAME="+file_name
if os.system(odiscen) <> 0:
raise odiscen
This code was working fine on ODI 10g but now I am getting this error when exeuting on ODI 11g :
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 8, in ?
/soaap/ODI_HOME/oracledi/bin/startcmd.sh OdiExportScen -SCEN_NAME=SCN_PKG_DEPLOYMENT -SCEN_VERSION=002 -FILE_NAME=/soaap/ODI_HOME/Scenarios/SCEN_SCN_PKG_DEPLOYMENT002.XML
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:345)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:169)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2374)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java:1615)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java:1580)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2755)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:534)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:322)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:246)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:237)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:794)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:619)
Please guide for this.
Thanks,
Divya

Hi,
I was trying to execute the same thing in ODI 10g with the script you have mentioned and get errors with invalid syntax.
Can you please explain how did you execute the export scenario command in ODI 10g. Would we really helpful.
We are trying to export scenarios from operator to the local directory.
Please find the script.
import os
scen='#V_GET_ODI_SCEN'
scen_name=scen[5:-7]
scen_ver=scen[-7:-4]
file_name='C:\ODI_SCEN_DMP\#V_GET_ODI_SCEN'
odiscen="C:\OraHome_1\oracledi\bin\startcmd.bat OdiExportScen -SCEN_NAME="scen_name" -SCEN_VERSION="scen_ver" -FILE_NAME="+file_name
if os.system(odiscen) <> 0:
raise odiscen
org.apache.bsf.BSFException: exception from Jython: Traceback (innermost last):
(no code object) at line 0
File "<string>", line 6
     odiscen="C:\OraHome_1\oracledi\bin\startcmd.bat OdiExportScen -SCEN_NAME="scen_name" -SCEN_VERSION="scen_ver" -FILE_NAME="+file_name
     ^
SyntaxError: invalid syntax
Your help is appreciated.

Error while using BAPI BAPI_GOODSMVT_CREATE for Momvent type 321

Similar Messages

Maybe you are looking for