Error while using BPEL Project wizard

No Matter what targetnamespace you enter during the BPEL process generation , the wizard alsways generates the .wsdl with the default target name space. ie targetNamespace="http://xmlns.oracle.com/....
Also the schema it generates prefixes "Process" at the end in the xsd, but the wsdl and other links refer to the name space without prefix
Anil

The error was due to the undeleted old file. Jdeveloper does not actually "delete" the old files properly or it is cache somewhere else by the tool. When a new project is created using the same project name the old residues clash.
ANIL

Similar Messages

Error while using DB Adapter in BPEL process

Hi All,
I am getting error while using DB Adapter in BPEL process
java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:575) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:381) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:298) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.el.parser.AstValue.invoke(AstValue.java:157) at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283) at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53) at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1259) at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:97) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:91) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:698) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:285) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) Caused by: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:260) at oracle.sysman.emSDK.webservices.wsdlparser.OperationInfoImpl.invokeWithDispatch(OperationInfoImpl.java:985) at oracle.sysman.emas.model.wsmgt.PortName.invokeOperation(PortName.java:729) at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:569) ... 69 more Caused by: javax.xml.ws.soap.SOAPFaultException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:955) at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:750) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:234) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:105) at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:256) ... 72 more
I have created jndi from console which I have mentioned in DBAdapter and I have provided details of JNDI to DbAdapter in deployment.
I am not able to solve this.
Can you please let me know solution for this or provide me link for tutorial of DBAdapter for stored procdure call?

did u deploy your dbadapter through console to the plan mentioned for deployment?

Error while exporting OSB project using ANT

Hi,
My OSB Version is 11.1.1.5 and I was trying to get my export done using the scripts provided by Edwin on his blog http://biemond.blogspot.in/2010/07/osb-11g-ant-deployment-scripts.html
I am able to exportFromWorkspace but I am facing the error while using the target exportFromOSB. The error while executing is :
File "export.py", line 7, in ?
ImportError: no module named wli
at weblogic.management.scripting.WLSTInterpreterInvoker.printError(WLSTInterpreterInvoker.java:110)
at weblogic.management.scripting.WLSTInterpreterInvoker.executePyScript(WLSTInterpreterInvoker.java:103)
at weblogic.management.scripting.WLSTInterpreterInvoker.main(WLSTInterpreterInvoker.java:27)
Traceback (innermost last):
File "export.py", line 7, in ?
ImportError: no module named wli
I used these jar files in my Build.xml:
<path id="osb.class.path">
<pathelement path="D:\\Oracle1\\Middleware\\wlserver_10.3\\server\\lib\\weblogic.jar" />
<pathelement path="D:\\Oracle1\\Middleware\\Oracle_OSB1\\lib\\sb-kernel-api.jar" />
<pathelement path="D:\\Oracle1\\Middleware\\Oracle_OSB1\\lib\\sb-kernel-impl.jar" />
<pathelement path="D:\\Oracle1\\Middleware\\Oracle_OSB1\\lib\\sb-kernel-wls.jar" />
<pathelement path="${fmw.home}/Oracle_OSB1/modules/com.bea.common.configfwk_1.5.0.0.jar" />
</path>
<target name="exportFromOSB">
<wlst fileName="${domain.export.script}" debug="true" failOnError="true"
arguments="${wls.username} ${wls.password} ${wls.server} ${export.project} ${export.jar} ${export.customFile}">
<script>
adminUser=sys.argv[1]
adminPassword=sys.argv[2]
adminUrl=sys.argv[3]
exportJar = sys.argv[5]
customFile = sys.argv[6]
project = sys.argv[4]
print ('server:'+adminUser+','+adminPassword+','+adminUrl)
connect(adminUser,adminPassword,adminUrl)
domainRuntime()
</script>
</wlst>
</target>
so any one can help me..
Thanks in Advance
Chaitanya

http://www.javamonamour.org/2011/11/updated-version-of-importpy-and.html
click on build.xml and you will see the right jars

OSB: Cannot acquire data source error while using JCA DBAdapter in OSB

Hi All,
I've entered 'Cannot acquire data source' error while using JCA DBAdapter in OSB.
Error infor are as follows:
The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapter1/RetrievePersonService [ RetrievePersonService_ptt::RetrievePersonServiceSelect(RetrievePersonServiceSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'RetrievePersonServiceSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/soademoDatabase].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.soademoDatabase'. Resolved 'jdbc'; remaining name 'soademoDatabase'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
JNDI Name for the Database pool: eis/DB/soademoDatabase
JNDI Name for the Data source: jdbc/soademoDatabase
I created a basic DBAdapter in JDeveloper, got the xsd file, wsdl file, .jca file and the topLink mapping file imported them into OSB project.
Then I used the .jca file to generate a business service, and tested, then the error occurs as described above.
Login info in RetrievePersonService-or-mappings.xml
<login xsi:type="database-login">
<platform-class>org.eclipse.persistence.platform.database.oracle.Oracle9Platform</platform-class>
<user-name></user-name>
<connection-url></connection-url>
</login>
jca file content are as follows:
<adapter-config name="RetrievePersonService" adapter="Database Adapter" wsdlLocation="RetrievePersonService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/soademoDatabase" UIConnectionName="Connection1" adapterRef=""/>
<endpoint-interaction portType="RetrievePersonService_ptt" operation="RetrievePersonServiceSelect">
<interaction-spec className="oracle.tip.adapter.db.DBReadInteractionSpec">
<property name="DescriptorName" value="RetrievePersonService.PersonT"/>
<property name="QueryName" value="RetrievePersonServiceSelect"/>
<property name="MappingsMetaDataURL" value="RetrievePersonService-or-mappings.xml"/>
<property name="ReturnSingleResultSet" value="false"/>
<property name="GetActiveUnitOfWork" value="false"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
RetrievePersonService_db.wsdl are as follows:
<?xml version="1.0" encoding="UTF-8"?>
<WL5G3N0:definitions name="RetrievePersonService-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
<WL5G3N0:import location="RetrievePersonService.wsdl" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService"/>
<WL5G3N0:binding name="RetrievePersonService_ptt-binding" type="WL5G3N1:RetrievePersonService_ptt">
<WL5G3N2:binding style="document" transport="http://www.bea.com/transport/2007/05/jca"/>
<WL5G3N0:operation name="RetrievePersonServiceSelect">
<WL5G3N2:operation soapAction="RetrievePersonServiceSelect"/>
<WL5G3N0:input>
<WL5G3N2:body use="literal"/>
</WL5G3N0:input>
<WL5G3N0:output>
<WL5G3N2:body use="literal"/>
</WL5G3N0:output>
</WL5G3N0:operation>
</WL5G3N0:binding>
<WL5G3N0:service name="RetrievePersonService_ptt-bindingQSService">
<WL5G3N0:port binding="WL5G3N1:RetrievePersonService_ptt-binding" name="RetrievePersonService_ptt-bindingQSPort">
<WL5G3N2:address location="jca://eis/DB/soademoDatabase"/>
</WL5G3N0:port>
</WL5G3N0:service>
</WL5G3N0:definitions>
Any suggestion is appricated .
Thanks in advance!
Edited by: user11262117 on Jan 26, 2011 5:28 PM

Hi Anuj,
Thanks for your reply!
I found that the data source is registered on server soa_server1 as follows:
Binding Name: jdbc.soademoDatabase
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 80328036
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/291])/291
Binding Name: jdbc.SOADataSource
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 92966755
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/285])/285
I don't know how to determine which server the DBAdapter is targetted to.
But I found the following information:
Under Deoloyment->DBAdapter->Monitoring->Outbound Connection Pools
Outbound Connection Pool Server State Current Connections Created Connections
eis/DB/SOADemo AdminServer Running 1 1
eis/DB/SOADemo soa_server1 Running 1 1
eis/DB/soademoDatabase AdminServer Running 1 1
eis/DB/soademoDatabase soa_server1 Running 1 1
The DbAdapter is related to the following files:
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ DBPlan\ Plan. xml
I unzipped DbAdapter.rar, opened weblogic-ra.xml and found that there's only one data source is registered:
<?xml version="1.0"?>
<weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
<enable-global-access-to-classes>true</enable-global-access-to-classes>
<outbound-resource-adapter>
<default-connection-properties>
<pool-params>
<initial-capacity>1</initial-capacity>
<max-capacity>1000</max-capacity>
</pool-params>
<properties>
<property>
<name>usesNativeSequencing</name>
<value>true</value>
</property>
<property>
<name>sequencePreallocationSize</name>
<value>50</value>
</property>
<property>
<name>defaultNChar</name>
<value>false</value>
</property>
<property>
<name>usesBatchWriting</name>
<value>true</value>
</property>
<property>
<name>usesSkipLocking</name>
<value>true</value>
</property>
</properties>
          </default-connection-properties>
<connection-definition-group>
<connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
<connection-instance>
<jndi-name>eis/DB/SOADemo</jndi-name>
          <connection-properties>
               <properties>
               <property>
               <name>xADataSourceName</name>
               <value>jdbc/SOADataSource</value>
               </property>
               <property>
               <name>dataSourceName</name>
               <value></value>
               </property>
               <property>
               <name>platformClassName</name>
               <value>org.eclipse.persistence.platform.database.Oracle10Platform</value>
               </property>
               </properties>
          </connection-properties>
</connection-instance>
</connection-definition-group>
</outbound-resource-adapter>
</weblogic-connector>
Then I decided to use eis/DB/SOADemo for testing.
For JDeveloper project, after I deployed to weblogic server, it works fine.
But for OSB project referencing wsdl, jca and mapping file from JDeveloper project, still got the same error as follows:
BEA-380001: Invoke JCA outbound service failed with application error, exception:
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapterTest/DBReader [ DBReader_ptt::DBReaderSelect(DBReaderSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'DBReaderSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
It almost drive me crazy!!:-(
What's the purpose of 'weblogic-ra.xml' under the folder of 'C:\Oracle\Middleware\home_11gR1\Oracle_OSB1\lib\external\adapters\META-INF'?
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Error while using LabVIEW 8.2.1 Dll from Visual C++ 6.0

I am getting an error while using a LabVIEW 8.2.1 dll from Visual C++ 6.0 application. This is what I am doing:
1) Created a dll using LabVIEW 8.2.1 (I used a tutorial from NI knowledge base: "Creating DLLs from 6.0i". It is a temperature conversion VI; input DegreeF and get DegreeC out). Instead of LabVIEW 6.0i, I used 8.2.1. It created the dll Convert_Temp.dll successfully.
2) Then I created a Visual C++ 6.0 application (used a tutorial from NI knowledge base: "Calling a DLL from Microsoft Visual C++ that was Generated by LabVIEW 6i). I could build the project and create an executable application F_To_C.exe.
3) Then copied the LabVIEW dll Convert_Temp.dll into the folder where F_To_C.exe resides. Using windows explorer, went into that folder, and executed the application. I got the following error:
System Error 998 while loading the LabVIEW run-time engine (C:\Program Files\National Instruments\Shared\LabVIEW Run-Time\8.2\lvrt.dll).
Convert_Temp requires a version 8.2.1 (or compatible) LabVIEW Run-Time Engine. Please contact the vendor of Convert_Temp to correct this problem.
I checked the folder: C:\Program Files\National Instruments\Shared\LabVIEW Run-Time\8.2\. It has the file lvrt.dll.
So why am I getting this error?
GKB

sounds like you need to install the LabVIEW 8.2.1 runtime. Not the 8.2 runtime engine.
Paul <--Always Learning!!!
sense and simplicity.
Browse my sample VIs?

Error while saving BPM Project to MDS: BPM-70801 : Metadata operation failed

Dear All,
I am working on BPM 11g.
I installed the following products for BPM 11g
OS: Windows 7 SP1 Professional Edition all with 32 bit
Installed s/w:
    JDeveloper 11.1.1.6.0 Generic Version
    OracleXE 11.2 Win32
    ofm soa generic 11.1.1.6.0
    wls 10.3.5
    RCU 11.1.1.6 for schemas dev_soainfra, dev_sdpm and dev_mds - Utility run successfully.
Overall Installation is successful wth no issues.
Configuration of Weblogic server for domain is ok with admin server, soa_server1 and bam_server1 with test connections is ok.
I am using browser as Internet Explorer 9
In Jdeveloper 11.1.1.6.0 after creating application, project and process
From BPM MDS Navigator I configured the connection for Database 11g XE as well using
Override Application Server user/password
For SOA MDS I included the dev_mds user with MDS partition as obpm
tested connections all ok (weblogic and soa_server1 up and running)
In Jdeveloper I am able to export the BPM successfully.
In the BPM Project Navigator when I use the Project --> SalesQuote.jpr --> right clicking with
option as Save to BPM MDS the following error is occured as
"Error while saving BPM Project to MDS: BPM-70801 : Metadata operation failed".
If the error is resolved than I can see the project in BPM composer.
My queries on this error are
1) Has soa_server anything to do with this error
2) Is dev_mds schema to be reviewed
what can be the possibility to resolve the BPM-70801 error.
Please provide the solution ASAP or send me the reply to my [email protected]
Regards
Ajaz Ahmed

Hello Ajaz,
BPM-70801 is a very generic error that can have multiple causes. Please provide the error log from servers log file. From what I understand, you are using a separate soa_server1, so watch out /your_domain/servers/soa_server1/logs/soa_server1.log
Regards
km

Error while importing MS project into cProject

Hi
I am getting the below error while importing MS project client file or XML file into cProjects.
dpr_shared087
Logon language becomes original language
Message no. DPR_SHARED087
Diagnosis
The logon language is defined as a possible text language in Customizing for Collaboration Projects under Specify Text Languages. Therefore, it is valid.
System Response
The logon language becomes the original language of the new object that was created.
Kindly suggest what configuration data if any is missing.
Regards
Srikrishna

Hi
I am getting the below error while importing MS project into cProject.
Error occurred when importing from Microsoft Project
Message no. DPR_UI_BSP116
Diagnosis
When a project is imported from Microsoft Project, the system generates an XML string during internal processing. A project is then created in cProjects from this string.
The XML string contains errors because the values from Microsoft Project were transferred without verification.
Procedure for System Administration
Notify SAP or call the cProjects application with the "DebugMode=X" query string and carry out the import again.
The XML string that was generated temporarily is then validated against the cProjects XML schema. The error message from the XML parser is then displayed in the popup.
Kindly suggest, if the below steps for importing MS project is ok or not?
step 1: Create project in MS project with tasks.
step 2: Maintain maping fields of MSP in cProject configurat
step 3: Import MPP file into cProject using "Import" button.
step 4: I am getting the above error while importing the MPP file.
Regards
Srikrishna

"llegal character in path at index" Error While Using wsimport from ant.

Hi,
I am getting the following error, while using wsimport from ant build script. you have the details below. I dont have a clue on this error.
Error :
wsimport:
[echo] Generating the client stubs
[wsimport] error: Unable to parse "HelloService_schema1.xsd" : Illegal character in path at index 25: file:/D:/Study/WebService Eclipse Project/examples/jaxws/helloservice/service/server/wsdl/HelloService.wsdl#types?schema1
[wsimport] line 0 of file:/D:/Study/WebService Eclipse Project/examples/jaxws/helloservice/service/server/wsdl/HelloService.wsdl#types?schema1
[wsimport] error: Unable to parse "HelloService_schema1.xsd" : Illegal character in path at index 25: file:/D:/Study/WebService Eclipse Project/examples/jaxws/helloservice/service/server/wsdl/HelloService.wsdl#types?schema1
[wsimport] line ? of file:/D:/Study/WebService Eclipse Project/examples/jaxws/helloservice/service/server/wsdl/HelloService.wsdl#types?schema1
[wsimport] error: Element "{http://endpoint.helloservice/}sayHello" not found.
Java WebService :
package helloservice.endpoint;
import javax.jws.WebMethod;
import javax.jws.WebService;
@WebService()
public class Hello {
private String message = new String("Hello, ");
@WebMethod()
public String sayHello(String name) {
return message + name + ".";
Ant Build.xml
<project name="${project.name}" basedir="." default="ear">
     <property file="WS_build.properties"/>
     <target name="init">
          
          <echo description="Setting the path for the project"/>
          <path id="classpath">
               <fileset dir="${lib.dir}" includes="*.jar"/>
               <fileset dir="${commonWSLib.dir}" includes="*.jar"/>
          </path>
          
          <echo description="WSGEN Definition"/>
          <taskdef name="wsgen" classname="com.sun.tools.ws.ant.WsGen">
               <classpath>
                    <path refid="classpath"/>
               </classpath>
          </taskdef>
          
          <echo description="WSImport Definition" />
          <taskdef name="wsimport" classname="com.sun.tools.ws.ant.WsImport">
               <classpath>
                    <path refid="classpath"/>
               </classpath>
          </taskdef>
     </target>
     <target name="Compile" depends="init">
          <echo description="Compiling the project"/>
          <mkdir dir="${build.dir}"/>
          <mkdir dir="${build.dir}/classes"/>
          <javac destdir="${build.dir}/classes" srcdir="${java.base}">
               <classpath>
                    <path refid="classpath"/>
               </classpath>
          </javac>
          <copy todir="${build.dir}/classes">
               <fileset dir="${java.base}" excludes="**/*.java"/>
          </copy>
     </target>
     <target name="wsgen" depends="Compile">
               <echo message="Generating the wsdl file[${project.name}Service.wsdl]" />
               <mkdir dir="${service.dir}"/>
               <mkdir dir="${service.dir}/server"/>
               <mkdir dir="${service.dir}/server/classes"/>
               <mkdir dir="${service.dir}/server/src"/>
               <mkdir dir="${service.dir}/server/wsdl"/>
               <wsgen sei="${sei.class}" destdir="${service.dir}/server/classes" genwsdl="true"
               sourcedestdir="${service.dir}/server/src" resourcedestdir="${service.dir}/server/wsdl">
                    <classpath>
                         <path refid="classpath" />
                         <pathelement location="${build.dir}/classes" />
                    </classpath>
               </wsgen>
     </target>
     <target name="copy" depends="wsgen">
               <echo message="Copying class and config files into ${web-inf.dir} folder" />
               <copy todir="${web-inf.dir}">
                    <fileset dir="${build.dir}"/>
                    <fileset dir="${service.dir}/server" includes="**/*.class"/>
                    <fileset dir="." includes="${lib.dir}/*.jar"/>
               </copy>
               <copy todir="${web-inf.dir}/${lib.dir}">
                    <fileset dir="${commonWSLib.dir}" includes="*.jar"/>
               </copy>
               <copy todir="${web-inf.dir}">
                    <fileset dir="${web-inf.dir}" includes="**/*.xml"/>
               </copy>
     </target>
     
     <target name="war" depends="copy">
          <echo message="Creating the war file [${project.name}.war]" />
          <mkdir dir="${dist.dir}"/>
          <mkdir dir="${dist.dir}/server"/>
          <war destfile="${dist.dir}/server/${project.name}.war" webxml="${web-inf.dir}/web.xml" basedir="${web.dir}"/>
     </target>
     <target name="wsimport" depends="war">
          <echo message="Generating the client stubs" />
          <mkdir dir="${service.dir}"/>
          <mkdir dir="${service.dir}/client"/>
          <mkdir dir="${service.dir}/client/classes"/>
          <mkdir dir="${service.dir}/client/src"/>
          <wsimport wsdl="${basedir}/${service.dir}/server/wsdl/${project.name}.wsdl"
               destdir="${service.dir}/client/classes"
               package="${wsimport.package}"
               sourcedestdir="${service.dir}/client/src">
          </wsimport>
     </target>
     <target name="clientjar" depends="wsimport">
<echo message="Creating the client jar file [${project.name}Client.jar] " />
<copy todir="${service.dir}/client/classes">
<fileset dir="${service.dir}/client/src"/>
</copy>
<mkdir dir="${dist.dir}/client"/>
               <tstamp>
               <format property="TODAY" pattern="yyyy-MM-dd hh:mm:ss" />
               </tstamp>
<jar destfile="${dist.dir}/client/${project.name}Client.jar"
basedir="${service.dir}/client/classes">
               <manifest>
               <attribute name="Built-By" value="${user.name}"/>
               <attribute name="Built-Date" value="${TODAY}"/>
               <attribute name="Implementation-Version" value="${version}-b${build.number}"/>
          </manifest>
          </jar>
<mkdir dir="${dist.dir}/client"/>
     </target>
     
     <target name="enginejar" depends="clientjar">
     <echo message="Creating the engine jar file for local call [${project.name}.jar] " />
          
          <tstamp>
               <format property="TODAY" pattern="yyyy-MM-dd hh:mm:ss" />
          </tstamp>
     <jar destfile="${dist.dir}/server/${project.name}.jar"
     basedir="${build.dir}/classes">
               <manifest>
                    <attribute name="Built-By" value="${user.name}"/>
                    <attribute name="Built-Date" value="${TODAY}"/>
                    <attribute name="Implementation-Version" value="${version}-b${build.number}"/>
          </manifest>
          </jar>
          </target>
          
          <target name="ear" depends="enginejar" >
               <echo message="Creating the ear file [${project.name}.ear]" />
               <ear destfile="${dist.dir}/server/${project.name}.ear" appxml="META-INF/application.xml">
               <fileset dir="${dist.dir}/server" includes="${project.name}.war"/>
          </ear>
               <antcall target="clean"></antcall>
          </target>
          
          <target name="clean">
               <echo message="Cleaning up folders " />
               <delete dir="${build.dir}"/>
               <delete dir="${service.dir}"/>
               <delete dir="${web-inf.dir}/classes"/>
               <delete dir="${web-inf.dir}/lib"/>
               <echo message="${project.name}.ear, ${project.name}.war, ${project.name}.jar and ${project.name}Client.jar is available in project's ${dist.dir} folder"/>
          </target>
</project>
Generated wsdl(HelloService.wsdl) :
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<definitions targetNamespace="http://endpoint.helloservice/" name="HelloService" xmlns:tns="http://endpoint.helloservice/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns="http://schemas.xmlsoap.org/wsdl/">
<types>
<xsd:schema>
<xsd:import namespace="http://endpoint.helloservice/" schemaLocation="HelloService_schema1.xsd"/>
</xsd:schema>
</types>
<message name="sayHello">
<part name="parameters" element="tns:sayHello"/>
</message>
<message name="sayHelloResponse">
<part name="parameters" element="tns:sayHelloResponse"/>
</message>
<portType name="Hello">
<operation name="sayHello">
<input message="tns:sayHello"/>
<output message="tns:sayHelloResponse"/>
</operation>
</portType>
<binding name="HelloPortBinding" type="tns:Hello">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/>
<operation name="sayHello">
<soap:operation soapAction=""/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
</operation>
</binding>
<service name="HelloService">
<port name="HelloPort" binding="tns:HelloPortBinding">
<soap:address location="REPLACE_WITH_ACTUAL_URL"/>
</port>
</service>
</definitions>
Generated : HelloService_schema1.xsd
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<xs:schema version="1.0" targetNamespace="http://endpoint.helloservice/" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="sayHello" type="ns1:sayHello" xmlns:ns1="http://endpoint.helloservice/"/>
<xs:complexType name="sayHello">
<xs:sequence>
<xs:element name="arg0" type="xs:string" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
<xs:element name="sayHelloResponse" type="ns2:sayHelloResponse" xmlns:ns2="http://endpoint.helloservice/"/>
<xs:complexType name="sayHelloResponse">
<xs:sequence>
<xs:element name="return" type="xs:string" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
If u need any other information let me know.

This has been resolved by uploading relevant jar file

Error while deployiong bpel process plz help

i am geting an error while deployiong bpel process plz help
BUILD FAILED
E:\jdevstudio10132\jdev\mywork\Application4\vinayread\build.xml:79: A problem occured while connecting to server "chdsez116553d" using port "8888": bpel_vinayread_1.0.jar failed to deploy. Exception message is: ORABPEL-05215
Error while loading process.
The process domain encountered the following errors while loading the process "vinayread" (revision "1.0"): BPEL validation failed.
BPEL source validation failed, the errors are:
[Error ORABPEL-10902]: compilation failed
[Description]: in "bpel.xml", XML parsing failed because "undefined part element.
In WSDL at "file:/D:/product/10.1.3.1/OracleAS_8/bpel/domains/default/tmp/.bpel_vinayread_1.0_679323b0585449e9fd1887e6ee2bf444.tmp/vinayred.wsdl", message part element "{http://TargetNamespace.com/vinayred}Root-Element" is not defined in any of the schemas.
Please make sure the spelling of the element QName is correct and the WSDL import is complete.
[Potential fix]: n/a.
If you have installed a patch to the server, please check that the bpelcClasspath domain property includes the patch classes.
at com.collaxa.cube.engine.deployment.CubeProcessHolder.bind(CubeProcessHolder.java:285)
at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:862)
at com.collaxa.cube.engine.deployment.DeploymentManager.deploySuitcase(DeploymentManager.java:728)
at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.deploySuitcase(BPELDomainManagerBean.java:445)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
at com.evermind.server.ThreadState.runAs(ThreadState.java:646)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at DomainManagerBean_RemoteProxy_4bin6i8.deploySuitcase(Unknown Source)
at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:319)
at com.oracle.bpel.client.BPELDomainHandle.deployProcess(BPELDomainHandle.java:341)
at deployHttpClientProcess.jspService(_deployHttpClientProcess.java:376)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Total time: 1 second
plz give sme solutions

<?xml version="1.0" encoding="UTF-8"?>
<definitions name="vinayread"
targetNamespace="http://xmlns.oracle.com/vinayread"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:client="http://xmlns.oracle.com/vinayread"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/">
     
     <types>
          <schema xmlns="http://www.w3.org/2001/XMLSchema">
               <import namespace="http://xmlns.oracle.com/vinayread" schemaLocation="vinayread.xsd" />
          </schema>
     </types>
     
     <message name="vinayreadRequestMessage">
          <part name="payload" element="client:vinayreadProcessRequest"/>
     </message>
     <message name="vinayreadResponseMessage">
          <part name="payload" element="client:vinayreadProcessResponse"/>
     </message>
     
     
     <portType name="vinayread">
          <operation name="process">
               <input message="client:vinayreadRequestMessage" />
               <output message="client:vinayreadResponseMessage"/>
          </operation>
     </portType>
     
     <plnk:partnerLinkType name="vinayread">
          <plnk:role name="vinayreadProvider">
               <plnk:portType name="client:vinayread"/>
          </plnk:role>
     </plnk:partnerLinkType>
</definitions>
how to check the
which xsd contains
"{http://TargetNamespace.com/vinayred}Root-Element"????
how to check this plz tell me

Inconsistent FOTY0001: type error while using translateFromNative

I am getting FOTY0001: type error while using translateFromNative function in assign activity.
This error happens only in the below scenarios:
1. Create a BPEL process with file input adapter that accepts simple xml string as input and accepts files like input*.txt.
2. Create a simple XSD(Fixed Length native XSD) and convert the simple string to XML using translateFromNative function and copy it into a variable.
3. Switch off the process
4. Put atleast 10 input*.txt files in the folder and switch on the process.
This error doesn't happen when I put one file at time.. Even when I put multiple files, the error happens for few instances inconsitently.
Here is our assign activity
<assign name="Assign_1">
<copy>
<from variable="PlantChemMsg" part="Chemistry"
query="/ns2:Chemistry/ns2:chemistryString"/>
<to variable="tempChemistryString"/>
</copy>
<copy>
<from expression="ora:translateFromNative(bpws:getVariableData('tempChemistryString'), 'ChemistryLegacy1.xsd', 'Root-Element')"/>
<to variable="ChemistryOut" part="Root-Element"
query="/ns8:Root-Element"/>
</copy>
</assign>
Here is the error in group log:
ORABPEL-09500
XPath expression failed to execute.
Error while processing xpath expression, the expression is "ora:translateFromNative(string(bpws:getVariableData('tempChemistryString')), 'ChemistryLegacy1.xsd', 'Root-Element')", the reason is FOTY0001: type error.
Please verify the xpath query.
     at com.collaxa.cube.xml.xpath.BPELXPathUtil.evaluate(BPELXPathUtil.java:206)
     at com.collaxa.cube.engine.ext.wmp.BPELAssignWMP.evalFromValue(BPELAssignWMP.java:679)
     at com.collaxa.cube.engine.ext.wmp.BPELAssignWMP.__executeStatements(BPELAssignWMP.java:143)
     at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perform(BPELActivityWMP.java:195)
     at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:3705)
     at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1654)
Any help would be appreciated. Thanks.
-Sridhar

James,
Thanks & Sorry for the late reply.
I used assign activity just because I have only one source and target element.
This error happens even with transform activity.
Also, all the input messages are same. So It is definitely not the issue with the input message.
One observation I did is:
The error doesn't occur when I use like below(Full Http url):
ora:translateFromNative(string(bpws:getVariableData('tempChemistryString')), 'http://psc-d674943.hdq.uss.com:7777/orabpel/default/TestTranslateFromNativeError/1.0/ChemistryLegacy1.xsd
', 'Root-Element')
But occurs when I use like below.
ora:translateFromNative(string(bpws:getVariableData('tempChemistryString')), 'ChemistryLegacy1.xsd', 'Root-Element')

Error while using P2V in Oracle VM 2.2 version

Error while using P2V in Oracle VM 2.2 version
I tried using this option by using the steps given on one link but it didnt worked...
Error:
code 404, message No permission to list directory.
I ve tried giving full permissions on for /OVS on Server but invain.
Can U pls help me...
Thanks in advance.
Edited by: user10310678 on Sep 16, 2009 3:32 AM

user10310678 wrote:
I am using beta version. Oracle VM Manager 2.2.0If you have a beta version of 2.2, then you should be an Oracle employee. Please ask this question on an internal mailing list. If you are not an Oracle employee, please ask the employee that gave you this beta. As this is a beta, some functionality may not be operational yet, so I can't answer why this particular feature seems not to work.

Error while using UTL_FILE

I am getting the following error while using UTL_FILE procedure while using UTL_FILE.FOPEN procedure
from system account. I am using Windows XP with NTFS.
SQL> create or replace directory FILE_DIR as 'C:\'
2 /
Directory created.
SQL> grant read on directory FILE_DIR to public;
Grant succeeded.
1 create or replace PROCEDURE file_upload IS
2 v_file_name VARCHAR2(200);
3 v_file_type UTL_FILE.FILE_TYPE;
4 v_line VARCHAR2(1000);
5 BEGIN
6 v_file_name := 'customers_'||TO_CHAR(SYSDATE,'dd')||TO_CHAR(SYSDATE,'MON')||TO_CHAR(SYSDATE,'YYYY')||'.txt';
7 v_file_type := UTL_FILE.FOPEN('FILE_DIR','V_FILE_NAME','r',1000);
8 UTL_FILE.GET_LINE(v_file_type,V_LINE,1000);
9 UTL_FILE.FCLOSE(v_file_type);
10 DBMS_OUTPUT.PUT_LINE(V_LINE);
11* END;
SQL> exec file_upload;
BEGIN file_upload; END;
ERROR at line 1:
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 475
ORA-29283: invalid file operation
ORA-06512: at "SYSTEM.FILE_UPLOAD", line 7
ORA-06512: at line 1
I appreciate if someone can help me in this regard.
Thanks in Advance.
Regards
Muhammad ALi

Hello,
What exactly are you trying to do? Here I got 2 examples for you , replace with your directory name and pick right option for 'a' (append) or 'w' (write) or 'R' (read).
To read from a directory_ . This will read an existing file 'customer.txt" from the directory
{code}
CREATE OR REPLACE PROCEDURE .file_upload
IS
v_file_name VARCHAR2 (200);
v_file_type UTL_FILE.file_type;
v_line VARCHAR2 (1000);
BEGIN
v_file_name := 'customers.txt';
v_file_type := UTL_FILE.fopen ('EXT_TABLES', v_file_name, 'R');
UTL_FILE.get_line (v_file_type, v_line); -- Error was here
DBMS_OUTPUT.put_line (v_line);
UTL_FILE.fclose (v_file_type);
END;
{code}
_*To open a file*_ This will create customer_XXXXX file under the directory
{code}
CREATE OR REPLACE PROCEDURE testme.file_upload
IS
v_file_name VARCHAR2 (200);
v_file_type UTL_FILE.file_type;
v_line VARCHAR2 (1000);
BEGIN
v_file_name := 'customers_'
|| TO_CHAR (SYSDATE, 'dd')
|| TO_CHAR (SYSDATE, 'MON')
|| TO_CHAR (SYSDATE, 'YYYY')
|| '.txt';
v_file_type := UTL_FILE.fopen ('EXT_TABLES', v_file_name, 'a');
UTL_FILE.put_line (v_file_type, v_line);
DBMS_OUTPUT.put_line (v_line);
UTL_FILE.fclose (v_file_type);
END;
{code}
Regards
Edited by: OrionNet on Jan 29, 2009 12:30 AM

In Oracle 10g Error while using COLLECT

I getting error while using collect in 10g
SQL> ed
Wrote file afiedt.buf
1 SELECT deptno
2 , COLLECT(ename) AS emps
3 FROM emp
4 GROUP BY
5* deptno
SQL> /
, COLLECT(ename) AS emps
ERROR at line 2:
ORA-00932: inconsistent datatypes: expected NUMBER got -
Please give me the solution.

you are using old version of SQL*Plus. if you use later version it will give you correct result.
Edited by: unus on Mar 14, 2010 4:25 AM

Error while using XML Iview, please contact your system administrator.

Hello everybody,
I have already posted a detailed message for the XML iview problem sometime back but havent got any reply so far. All the replies had come from users who are also facing the same problem. I am trying to use a XML iview for fetching RSS feeds from one of the internet source, i have entered the proper URL and selected the proper RSS to XHTMLB transformer also and have entered the proxy settings in the http service and enabled it and restarted it also, but again when i am previewing the Iview its giving me the error <b>"Error while using XML Iview, please contact your system administrator."</b>. I am using
    Area           Version
    J2EE Engine    6.40 PatchLevel 98256.313
    Portal         6.0.14.0.0
, can someone tell me whether its a bug in sp14 or i am missing something while creating this XML Iview. Expecting a proper reply.
Thanks in advance,
Regards,
Sarabjeet.

Hi Sarabjeet,
The XML iView uses server-side fetching, so if you are having problems with a regular URL iView in server-side fetching mode, so the problem with the XML iVIew probably has to do with the proxy settings.
And since you got a 407 error, it seems there is an issue with proxy settings or the proxy server, as mentioned in this description of 407 error:
The HTTP 407 code only applies to users who are accessing the Internet behind a proxy server. This is common in government and corporate workplaces. The 407 code indicates that your computer must first authenticate itself with your company's proxy server. Check with your IT department or computer support group as to the exact reason why you may be getting this error. It may be possible that the proxy server does not allow downloads of specific files (exe, cab, com). You can also verify that your proxy server settings are valid.
I will check if I can find out any more specific info.
Daniel

Error while using exp utility

Hi,
I am getting the following oracle error while using exp,
can someone please suggest on this,
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user SIEBEL
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user SIEBEL
About to export SIEBEL's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
. about to export SIEBEL's tables via Conventional Path ...
. . exporting table EIM_ACCDTL_TNT
EXP-00008: ORACLE error 904 encountered
ORA-00904: "MAXSIZE": invalid identifier
. . exporting table EIM_ACCNTROUTE
EXP-00008: ORACLE error 1003 encountered
ORA-01003: no statement parsed
. . exporting table EIM_ACCNT_CUT
EXP-00008: ORACLE error 904 encountered
ORA-00904: "MAXSIZE": invalid identifier
. . exporting table EIM_ACCNT_DTL
EXP-00008: ORACLE error 1003 encountered
ORA-01003: no statement parsed

Satish is right, there exists bug for 11.1.0.6.
Look at metalink note 741984.1.
Bug number is 5872788 - there exists patch as well.

Error while using BPEL Project wizard

Similar Messages

Maybe you are looking for