Error while using odi out file

hi all
Am using odi out file for displaying error in separate file.
If i give the path of the file in target file directly am getting the error properly loading inside text file.
Is it possible to assign the target file path in variable and use that variable in target file of odi out file ?
can u pls tel me whether using variable for target file location is possible, if so please tel how to do it
Edited by: user12209948 on Sep 26, 2011 2:16 AM

Hi,
use the physical schema and get the path using ODIRef Functions for example ODIFileMove
OdiFileMove "-FILE=<%=odiRef.getSchemaName(""FILE_LOGICAL"", ""D"")%>/#PROJ_X.vFileName" "-TOFILE=<%=odiRef.getSchemaName(""FILE_LOGICAL"", ""D"")%>/#PROJ_X.vFDir/#PROJ_X.vNewFile" "-OVERWRITE=NO" "-CASESENS=NO" "-RECURSE=NO"
This command moves the file with vFileName to a vNewFile in a another directory
FILE_LOGICAL is the logical schema name mapped to physical schema say your target directory ( eg C:\test )
Same logic applies to ODIOutFile
Edited by: john z on Sep 26, 2011 9:41 PM

Similar Messages

Error while using LabVIEW 8.2.1 Dll from Visual C++ 6.0

I am getting an error while using a LabVIEW 8.2.1 dll from Visual C++ 6.0 application. This is what I am doing:
1) Created a dll using LabVIEW 8.2.1 (I used a tutorial from NI knowledge base: "Creating DLLs from 6.0i". It is a temperature conversion VI; input DegreeF and get DegreeC out). Instead of LabVIEW 6.0i, I used 8.2.1. It created the dll Convert_Temp.dll successfully.
2) Then I created a Visual C++ 6.0 application (used a tutorial from NI knowledge base: "Calling a DLL from Microsoft Visual C++ that was Generated by LabVIEW 6i). I could build the project and create an executable application F_To_C.exe.
3) Then copied the LabVIEW dll Convert_Temp.dll into the folder where F_To_C.exe resides. Using windows explorer, went into that folder, and executed the application. I got the following error:
System Error 998 while loading the LabVIEW run-time engine (C:\Program Files\National Instruments\Shared\LabVIEW Run-Time\8.2\lvrt.dll).
Convert_Temp requires a version 8.2.1 (or compatible) LabVIEW Run-Time Engine. Please contact the vendor of Convert_Temp to correct this problem.
I checked the folder: C:\Program Files\National Instruments\Shared\LabVIEW Run-Time\8.2\. It has the file lvrt.dll.
So why am I getting this error?
GKB

sounds like you need to install the LabVIEW 8.2.1 runtime. Not the 8.2 runtime engine.
Paul <--Always Learning!!!
sense and simplicity.
Browse my sample VIs?

Error while using XML Iview, please contact your system administrator.

Hello everybody,
I have already posted a detailed message for the XML iview problem sometime back but havent got any reply so far. All the replies had come from users who are also facing the same problem. I am trying to use a XML iview for fetching RSS feeds from one of the internet source, i have entered the proper URL and selected the proper RSS to XHTMLB transformer also and have entered the proxy settings in the http service and enabled it and restarted it also, but again when i am previewing the Iview its giving me the error <b>"Error while using XML Iview, please contact your system administrator."</b>. I am using
    Area           Version
    J2EE Engine    6.40 PatchLevel 98256.313
    Portal         6.0.14.0.0
, can someone tell me whether its a bug in sp14 or i am missing something while creating this XML Iview. Expecting a proper reply.
Thanks in advance,
Regards,
Sarabjeet.

Hi Sarabjeet,
The XML iView uses server-side fetching, so if you are having problems with a regular URL iView in server-side fetching mode, so the problem with the XML iVIew probably has to do with the proxy settings.
And since you got a 407 error, it seems there is an issue with proxy settings or the proxy server, as mentioned in this description of 407 error:
The HTTP 407 code only applies to users who are accessing the Internet behind a proxy server. This is common in government and corporate workplaces. The 407 code indicates that your computer must first authenticate itself with your company's proxy server. Check with your IT department or computer support group as to the exact reason why you may be getting this error. It may be possible that the proxy server does not allow downloads of specific files (exe, cab, com). You can also verify that your proxy server settings are valid.
I will check if I can find out any more specific info.
Daniel

Getting error while using Callouts

Hi Gurus,
I am getting the below error while using callouts.
Error -: AIP-51806: Error during callout invocation: Error -: AIP-10606: Domain exception in callout execution. Error -: AIP-10606: Domain exception in callout execution. Callout/Usage property not found for key password.
     at oracle.tip.adapter.b2b.callout.CalloutUtil.raiseIPCalloutDomainException(CalloutUtil.java:88)
     at oracle.tip.adapter.b2b.callout.CalloutContextImpl.getMapValue(CalloutContextImpl.java:100)
     at oracle.tip.adapter.b2b.callout.CalloutContextImpl.getStringProperty(CalloutContextImpl.java:149)
     at com.tm.EncryptMessage.execute(EncryptMessage.java:25)
     at oracle.tip.adapter.b2b.callout.CalloutExecuteWorker.doWork(CalloutExecuteWorker.java:424)
     at oracle.tip.adapter.b2b.callout.CalloutExecuteWorker.run(CalloutExecuteWorker.java:333)
     at java.lang.Thread.run(Thread.java:534)
     at oracle.tip.adapter.b2b.callout.B2BCalloutHandler.handleOutgoingCallout(B2BCalloutHandler.java:344)
     at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1606)
     at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:975)
     at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1167)
     at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
     at oracle.tip.transport.basic.FileSourceMonitor.processMessages(FileSourceMonitor.java:903)
     at oracle.tip.transport.basic.FileSourceMonitor.run(FileSourceMonitor.java:317)
Caused by: Error -: AIP-10606: Domain exception in callout execution. Error -: AIP-10606: Domain exception in callout execution. Callout/Usage property not found for key password.
     at oracle.tip.adapter.b2b.callout.CalloutUtil.raiseIPCalloutDomainException(CalloutUtil.java:88)
     at oracle.tip.adapter.b2b.callout.CalloutContextImpl.getMapValue(CalloutContextImpl.java:100)
     at oracle.tip.adapter.b2b.callout.CalloutContextImpl.getStringProperty(CalloutContextImpl.java:149)
     at com.tm.EncryptMessage.execute(EncryptMessage.java:25)
     at oracle.tip.adapter.b2b.callout.CalloutExecuteWorker.doWork(CalloutExecuteWorker.java:424)
     at oracle.tip.adapter.b2b.callout.CalloutExecuteWorker.run(CalloutExecuteWorker.java:333)
     at java.lang.Thread.run(Thread.java:534)
     at com.tm.EncryptMessage.execute(EncryptMessage.java:47)
     at oracle.tip.adapter.b2b.callout.CalloutExecuteWorker.doWork(CalloutExecuteWorker.java:424)
     at oracle.tip.adapter.b2b.callout.CalloutExecuteWorker.run(CalloutExecuteWorker.java:333)
     at java.lang.Thread.run(Thread.java:534)
I have configured the property "password" in the "Callout Properties" & "Callout Usage". I think no properties reaching the "CalloutContext" in the callout class.
Please help me in this.
Regards,
Vithal
Edited by: Vithal R on 03-Jun-2009 08:07

Hi Vithal,
Did you try with sample callouts -
http://download-uk.oracle.com/docs/cd/B14099_19/integrate.1012/b19370/callouts.htm
For your case, make sure -
You are following below steps to create the property -
http://download.oracle.com/docs/cd/B14099_19/integrate.1012/b19370/callouts.htm#BEIFDECJ
You have selected the appropriate callout usage while creating the agreement.
Callout Directory : Just mention the folder and not the jar.
Mention the appropriate jar file in the Libray name section of the "create call out"
Let us know the result please.
Regards,
Anuj
Edited by: Anuj Dwivedi on Jun 4, 2009 11:39 AM

OSB: Cannot acquire data source error while using JCA DBAdapter in OSB

Hi All,
I've entered 'Cannot acquire data source' error while using JCA DBAdapter in OSB.
Error infor are as follows:
The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapter1/RetrievePersonService [ RetrievePersonService_ptt::RetrievePersonServiceSelect(RetrievePersonServiceSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'RetrievePersonServiceSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/soademoDatabase].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.soademoDatabase'. Resolved 'jdbc'; remaining name 'soademoDatabase'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
JNDI Name for the Database pool: eis/DB/soademoDatabase
JNDI Name for the Data source: jdbc/soademoDatabase
I created a basic DBAdapter in JDeveloper, got the xsd file, wsdl file, .jca file and the topLink mapping file imported them into OSB project.
Then I used the .jca file to generate a business service, and tested, then the error occurs as described above.
Login info in RetrievePersonService-or-mappings.xml
<login xsi:type="database-login">
<platform-class>org.eclipse.persistence.platform.database.oracle.Oracle9Platform</platform-class>
<user-name></user-name>
<connection-url></connection-url>
</login>
jca file content are as follows:
<adapter-config name="RetrievePersonService" adapter="Database Adapter" wsdlLocation="RetrievePersonService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/soademoDatabase" UIConnectionName="Connection1" adapterRef=""/>
<endpoint-interaction portType="RetrievePersonService_ptt" operation="RetrievePersonServiceSelect">
<interaction-spec className="oracle.tip.adapter.db.DBReadInteractionSpec">
<property name="DescriptorName" value="RetrievePersonService.PersonT"/>
<property name="QueryName" value="RetrievePersonServiceSelect"/>
<property name="MappingsMetaDataURL" value="RetrievePersonService-or-mappings.xml"/>
<property name="ReturnSingleResultSet" value="false"/>
<property name="GetActiveUnitOfWork" value="false"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
RetrievePersonService_db.wsdl are as follows:
<?xml version="1.0" encoding="UTF-8"?>
<WL5G3N0:definitions name="RetrievePersonService-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
<WL5G3N0:import location="RetrievePersonService.wsdl" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService"/>
<WL5G3N0:binding name="RetrievePersonService_ptt-binding" type="WL5G3N1:RetrievePersonService_ptt">
<WL5G3N2:binding style="document" transport="http://www.bea.com/transport/2007/05/jca"/>
<WL5G3N0:operation name="RetrievePersonServiceSelect">
<WL5G3N2:operation soapAction="RetrievePersonServiceSelect"/>
<WL5G3N0:input>
<WL5G3N2:body use="literal"/>
</WL5G3N0:input>
<WL5G3N0:output>
<WL5G3N2:body use="literal"/>
</WL5G3N0:output>
</WL5G3N0:operation>
</WL5G3N0:binding>
<WL5G3N0:service name="RetrievePersonService_ptt-bindingQSService">
<WL5G3N0:port binding="WL5G3N1:RetrievePersonService_ptt-binding" name="RetrievePersonService_ptt-bindingQSPort">
<WL5G3N2:address location="jca://eis/DB/soademoDatabase"/>
</WL5G3N0:port>
</WL5G3N0:service>
</WL5G3N0:definitions>
Any suggestion is appricated .
Thanks in advance!
Edited by: user11262117 on Jan 26, 2011 5:28 PM

Hi Anuj,
Thanks for your reply!
I found that the data source is registered on server soa_server1 as follows:
Binding Name: jdbc.soademoDatabase
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 80328036
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/291])/291
Binding Name: jdbc.SOADataSource
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 92966755
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/285])/285
I don't know how to determine which server the DBAdapter is targetted to.
But I found the following information:
Under Deoloyment->DBAdapter->Monitoring->Outbound Connection Pools
Outbound Connection Pool Server State Current Connections Created Connections
eis/DB/SOADemo AdminServer Running 1 1
eis/DB/SOADemo soa_server1 Running 1 1
eis/DB/soademoDatabase AdminServer Running 1 1
eis/DB/soademoDatabase soa_server1 Running 1 1
The DbAdapter is related to the following files:
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ DBPlan\ Plan. xml
I unzipped DbAdapter.rar, opened weblogic-ra.xml and found that there's only one data source is registered:
<?xml version="1.0"?>
<weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
<enable-global-access-to-classes>true</enable-global-access-to-classes>
<outbound-resource-adapter>
<default-connection-properties>
<pool-params>
<initial-capacity>1</initial-capacity>
<max-capacity>1000</max-capacity>
</pool-params>
<properties>
<property>
<name>usesNativeSequencing</name>
<value>true</value>
</property>
<property>
<name>sequencePreallocationSize</name>
<value>50</value>
</property>
<property>
<name>defaultNChar</name>
<value>false</value>
</property>
<property>
<name>usesBatchWriting</name>
<value>true</value>
</property>
<property>
<name>usesSkipLocking</name>
<value>true</value>
</property>
</properties>
          </default-connection-properties>
<connection-definition-group>
<connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
<connection-instance>
<jndi-name>eis/DB/SOADemo</jndi-name>
          <connection-properties>
               <properties>
               <property>
               <name>xADataSourceName</name>
               <value>jdbc/SOADataSource</value>
               </property>
               <property>
               <name>dataSourceName</name>
               <value></value>
               </property>
               <property>
               <name>platformClassName</name>
               <value>org.eclipse.persistence.platform.database.Oracle10Platform</value>
               </property>
               </properties>
          </connection-properties>
</connection-instance>
</connection-definition-group>
</outbound-resource-adapter>
</weblogic-connector>
Then I decided to use eis/DB/SOADemo for testing.
For JDeveloper project, after I deployed to weblogic server, it works fine.
But for OSB project referencing wsdl, jca and mapping file from JDeveloper project, still got the same error as follows:
BEA-380001: Invoke JCA outbound service failed with application error, exception:
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapterTest/DBReader [ DBReader_ptt::DBReaderSelect(DBReaderSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'DBReaderSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
It almost drive me crazy!!:-(
What's the purpose of 'weblogic-ra.xml' under the folder of 'C:\Oracle\Middleware\home_11gR1\Oracle_OSB1\lib\external\adapters\META-INF'?
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

APEX 4.0: error while opening a XLS file downloaded from interactive report

Hi,
I'm getting below error while opening a XLS file downloaded from an interactive report (APEX 4.0).
"The file you trying to open, 'customer_2.xls', is in a different format than specified by the file extension.
Verify that the is not corrupted and is from a trusted source before opening file. Do you want to open file."
Yes No Help
May be this one Apex 4.0 issue.
please help me.
Thanks
Mukesh

Hi,
is the next part of the code correct.
What i mean is packing of the attachment, finding out the size of pdf file and doc type as PDF.
You can also try below link..
Link: [http://wiki.sdn.sap.com/wiki/display/Snippets/SENDALVGRIDASPDFATTACHMENTTOSAPINBOXUSINGCLASSES]
Hope this helps.
Regards,
-Sandeep

Error While uplaoding a EXCEL file in Web dynpro - HR_KR_XSTRING_TO_STRING

Hi,
I am getting an error while uploading an excel file in web Dynpro application. i am using the HR_KR_XSTRING_TO_STRING this function. I am getting the following error message 'Unable to interpret as a number'.

First of all, are you sure you know what you are working with here. If this is standard Excel file in the Microsoft binary/propriatery format there is not function module or class in ABAP that can magically just transform this to a character string. You should search the forums as this has been discussed extensively. On that topic, please also do not post duplicate threads. I have already locked your other thread with the same basic question.
Instead of the binary/propriatery format of Excel, the file should be saved on the client as a text based format - like XML or Text Tab Delimited. You can then use several different options on the server to convert the XSTRING to STRING and process the content (becuase it was text based to begin with). You could use CL_BCS_CONVERT, the function modules in the function group SCMS_CONV, or the class CL_ABAP_CONV_IN_CE.

Logminer error while creating a dictionary file

Hi ,
I am working on logminer.
i got the following error while creating a dictionary file :--
please help me out.
SQL> show parameter utl_
NAME TYPE VALUE
utl_file_dir string $ORACLE_BASE/utl_file/cecms
SQL> execute dbms_logmnr_d.build(dictionary_filename => 'dictionary.ora',dictionary_location => '/u00/oracle/utl_file/cecms');
BEGIN dbms_logmnr_d.build(dictionary_filename => 'dictionary.ora',dictionary_location => '/u00/oracle/utl_file/cecms'); END;
ERROR at line 1:
ORA-01336: specified dictionary file cannot be opened
ORA-29280: invalid directory path
ORA-06512: at "SYS.DBMS_LOGMNR_D", line 928
ORA-06512: at "SYS.DBMS_LOGMNR_D", line 2052
ORA-06512: at line 1
Asif

ORA-01336: specified dictionary file cannot be opened
Cause: The dictionary file or directory does not exist or is inaccessible.
Action: Make sure that the dictionary file and directory exist and are accessible.
Probably an issue with the rights on the directories.
To confirm the same, try writing a sample procedure with UTL_FILE to create a file at this location and capture the error. It will give you more details about the problem.

Error while using UTL_FILE

I am getting the following error while using UTL_FILE procedure while using UTL_FILE.FOPEN procedure
from system account. I am using Windows XP with NTFS.
SQL> create or replace directory FILE_DIR as 'C:\'
2 /
Directory created.
SQL> grant read on directory FILE_DIR to public;
Grant succeeded.
1 create or replace PROCEDURE file_upload IS
2 v_file_name VARCHAR2(200);
3 v_file_type UTL_FILE.FILE_TYPE;
4 v_line VARCHAR2(1000);
5 BEGIN
6 v_file_name := 'customers_'||TO_CHAR(SYSDATE,'dd')||TO_CHAR(SYSDATE,'MON')||TO_CHAR(SYSDATE,'YYYY')||'.txt';
7 v_file_type := UTL_FILE.FOPEN('FILE_DIR','V_FILE_NAME','r',1000);
8 UTL_FILE.GET_LINE(v_file_type,V_LINE,1000);
9 UTL_FILE.FCLOSE(v_file_type);
10 DBMS_OUTPUT.PUT_LINE(V_LINE);
11* END;
SQL> exec file_upload;
BEGIN file_upload; END;
ERROR at line 1:
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 475
ORA-29283: invalid file operation
ORA-06512: at "SYSTEM.FILE_UPLOAD", line 7
ORA-06512: at line 1
I appreciate if someone can help me in this regard.
Thanks in Advance.
Regards
Muhammad ALi

Hello,
What exactly are you trying to do? Here I got 2 examples for you , replace with your directory name and pick right option for 'a' (append) or 'w' (write) or 'R' (read).
To read from a directory_ . This will read an existing file 'customer.txt" from the directory
{code}
CREATE OR REPLACE PROCEDURE .file_upload
IS
v_file_name VARCHAR2 (200);
v_file_type UTL_FILE.file_type;
v_line VARCHAR2 (1000);
BEGIN
v_file_name := 'customers.txt';
v_file_type := UTL_FILE.fopen ('EXT_TABLES', v_file_name, 'R');
UTL_FILE.get_line (v_file_type, v_line); -- Error was here
DBMS_OUTPUT.put_line (v_line);
UTL_FILE.fclose (v_file_type);
END;
{code}
_*To open a file*_ This will create customer_XXXXX file under the directory
{code}
CREATE OR REPLACE PROCEDURE testme.file_upload
IS
v_file_name VARCHAR2 (200);
v_file_type UTL_FILE.file_type;
v_line VARCHAR2 (1000);
BEGIN
v_file_name := 'customers_'
|| TO_CHAR (SYSDATE, 'dd')
|| TO_CHAR (SYSDATE, 'MON')
|| TO_CHAR (SYSDATE, 'YYYY')
|| '.txt';
v_file_type := UTL_FILE.fopen ('EXT_TABLES', v_file_name, 'a');
UTL_FILE.put_line (v_file_type, v_line);
DBMS_OUTPUT.put_line (v_line);
UTL_FILE.fclose (v_file_type);
END;
{code}
Regards
Edited by: OrionNet on Jan 29, 2009 12:30 AM

Error while importing a dump file in my local database

Hi,
I have a dump file named *"system_21Sep2010_DVSD.DMP"* which i'm trying to import in my local database named *"nandita1"*.
The dump file is found under the following path *"C:\DevSuiteHome_1\BIN"* and i executed the following command for importing the dump file:
C:\DevSuiteHome_1\BIN>imp system/system@nandita1 FILE=system_21Sep2010_DVSD.DMP FULL=YES
I'm getting the following error while importing the dump file:
Import: Release 10.1.0.4.2 - Production on Wed Oct 6 16:25:37 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc
tion
With the Partitioning, OLAP and Data Mining options
Export file created by EXPORT:V10.01.00 via conventional path
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
IMP-00015: following statement failed because the object already exists:
"CREATE UNDO TABLESPACE "UNDOTBS1" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DV"
"SD/undotbs01.dbf' SIZE 104857600 AUTOEXTEND ON NEXT 5242880 MAXSIZE "
"32767M EXTENT MANAGEMENT LOCAL "
IMP-00015: following statement failed because the object already exists:
"CREATE TABLESPACE "SYSAUX" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/sysa"
"ux01.dbf' SIZE 367001600 AUTOEXTEND ON NEXT 10485760 MAXSIZE 32767M "
"EXTENT MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT SEGMENT SPACE MANA"
"GEMENT AUTO"
IMP-00015: following statement failed because the object already exists:
"CREATE TEMPORARY TABLESPACE "TEMP" BLOCKSIZE 8192 TEMPFILE '/oradata_dev/D"
"VSD/temp01.dbf' SIZE 20971520 AUTOEXTEND ON NEXT 655360 MAXSIZE 3276"
"7M EXTENT MANAGEMENT LOCAL UNIFORM SIZE 1048576"
IMP-00015: following statement failed because the object already exists:
"CREATE TABLESPACE "USERS" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/users"
"01.dbf' SIZE 5242880 AUTOEXTEND ON NEXT 1310720 MAXSIZE 32767M EXTEN"
"T MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT SEGMENT SPACE MANAGEMEN"
"T AUTO"
IMP-00015: following statement failed because the object already exists:
"CREATE TABLESPACE "XX_DATA" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/XX_"
"DATA01.dbf' SIZE 140509184 AUTOEXTEND ON NEXT 1048576 MAXSIZE 32767M"
" EXTENT MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT "
IMP-00015: following statement failed because the object already exists:
"CREATE TABLESPACE "XX_INDEX" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/XX"
"_INDEX.dbf' SIZE 93323264 AUTOEXTEND ON NEXT 1048576 MAXSIZE 32767M "
"EXTENT MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT "
IMP-00015: following statement failed because the object already exists:
"CREATE PROFILE "MONITORING_PROFILE" LIMIT COMPOSITE_LIMIT DEFAULT SESSIONS_"
"PER_USER DEFAULT CPU_PER_SESSION DEFAULT CPU_PER_CALL DEFAULT LOGICAL_READS"
"_PER_SESSION DEFAULT LOGICAL_READS_PER_CALL DEFAULT IDLE_TIME DEFAULT CONNE"
"CT_TIME DEFAULT PRIVATE_SGA DEFAULT FAILED_LOGIN_ATTEMPTS UNLIMITED PASSWOR"
"D_LIFE_TIME DEFAULT PASSWORD_REUSE_TIME DEFAULT PASSWORD_REUSE_MAX DEFAULT "
"PASSWORD_LOCK_TIME DEFAULT PASSWORD_GRACE_TIME DEFAULT"
IMP-00015: following statement failed because the object already exists:
"CREATE USER "OUTLN" IDENTIFIED BY VALUES '4A3BA55E08595C81' TEMPORARY TABLE"
"SPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
IMP-00015: following statement failed because the object already exists:
"CREATE USER "TSMSYS" IDENTIFIED BY VALUES '3DF26A8B17D0F29F' DEFAULT TABLES"
"PACE "USERS" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
IMP-00015: following statement failed because the object already exists:
"CREATE USER "ANONYMOUS" IDENTIFIED BY VALUES 'anonymous' DEFAULT TABLESPACE"
" "SYSAUX" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
IMP-00015: following statement failed because the object already exists:
"CREATE USER "OLAPSYS" IDENTIFIED BY VALUES '3FB8EF9DB538647C' DEFAULT TABLE"
"SPACE "SYSAUX" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
IMP-00015: following statement failed because the object already exists:
"CREATE USER "MDDATA" IDENTIFIED BY VALUES 'DF02A496267DEE66' DEFAULT TABLES"
"PACE "USERS" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
IMP-00015: following statement failed because the object already exists:
"CREATE USER "SYSMAN" IDENTIFIED BY VALUES '28F72A3C2D75FDE9' DEFAULT TABLES"
"PACE "SYSAUX" TEMPORARY TABLESPACE "TEMP""
IMP-00015: following statement failed because the object already exists:
"CREATE USER "MGMT_VIEW" IDENTIFIED BY VALUES '442167C25FAC883C' TEMPORARY T"
"ABLESPACE "TEMP""
IMP-00015: following statement failed because the object already exists:
"CREATE USER "SCOTT" IDENTIFIED BY VALUES 'F894844C34402B67' DEFAULT TABLESP"
"ACE "USERS" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
IMP-00015: following statement failed because the object already exists:
"CREATE USER "BUXXDDWA" IDENTIFIED BY VALUES '2672292A792DB64B' DEFAULT TABL"
"ESPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
IMP-00015: following statement failed because the object already exists:
"CREATE USER "XXDDWA" IDENTIFIED BY VALUES 'F5C178B2796496F4' DEFAULT TABLES"
"PACE "XX_INDEX" TEMPORARY TABLESPACE "TEMP""
IMP-00015: following statement failed because the object already exists:
"CREATE USER "BUXXDDWS" IDENTIFIED BY VALUES '06D47E0665132890' DEFAULT TABL"
"ESPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
IMP-00015: following statement failed because the object already exists:
"CREATE USER "BUXXSUC" IDENTIFIED BY VALUES '1705C688518ADCDC' DEFAULT TABLE"
"SPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
IMP-00015: following statement failed because the object already exists:
"CREATE USER "JIRAUSER" IDENTIFIED BY VALUES 'F0E1C662FCD1E09F' DEFAULT TABL"
"ESPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
IMP-00015: following statement failed because the object already exists:
"CREATE USER "XXSFA" IDENTIFIED BY VALUES 'C3DFA37A29E072B6' DEFAULT TABLESP"
"ACE "XX_INDEX" TEMPORARY TABLESPACE "TEMP""
IMP-00015: following statement failed because the object already exists:
"CREATE USER "XXDDW" IDENTIFIED BY VALUES 'CFF3D9B1B6C20DCC' DEFAULT TABLESP"
"ACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
IMP-00015: following statement failed because the object already exists:
"CREATE USER "XXDDWS" IDENTIFIED BY VALUES '9EF0EE1BAC5855C4' DEFAULT TABLES"
"PACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
IMP-00015: following statement failed because the object already exists:
"CREATE USER "XXSUC" IDENTIFIED BY VALUES '39594B53A6F1CED0' DEFAULT TABLESP"
"ACE "XX_INDEX" TEMPORARY TABLESPACE "TEMP""
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "SELECT_CATALOG_ROLE""
IMP-00015: following statement failed because the object already exists:
"REVOKE "SELECT_CATALOG_ROLE" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "EXECUTE_CATALOG_ROLE""
IMP-00015: following statement failed because the object already exists:
"REVOKE "EXECUTE_CATALOG_ROLE" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "DELETE_CATALOG_ROLE""
IMP-00015: following statement failed because the object already exists:
"REVOKE "DELETE_CATALOG_ROLE" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "RECOVERY_CATALOG_OWNER""
IMP-00015: following statement failed because the object already exists:
"REVOKE "RECOVERY_CATALOG_OWNER" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "GATHER_SYSTEM_STATISTICS""
IMP-00015: following statement failed because the object already exists:
"REVOKE "GATHER_SYSTEM_STATISTICS" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "LOGSTDBY_ADMINISTRATOR""
IMP-00015: following statement failed because the object already exists:
"REVOKE "LOGSTDBY_ADMINISTRATOR" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "AQ_ADMINISTRATOR_ROLE""
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "AQ_USER_ROLE""
IMP-00015: following statement failed because the object already exists:
"REVOKE "AQ_USER_ROLE" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "GLOBAL_AQ_USER_ROLE" IDENTIFIED GLOBALLY "
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "SCHEDULER_ADMIN""
IMP-00015: following statement failed because the object already exists:
"REVOKE "SCHEDULER_ADMIN" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "HS_ADMIN_ROLE""
IMP-00015: following statement failed because the object already exists:
"REVOKE "HS_ADMIN_ROLE" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "AUTHENTICATEDUSER""
IMP-00015: following statement failed because the object already exists:
"REVOKE "AUTHENTICATEDUSER" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "OEM_ADVISOR""
IMP-00015: following statement failed because the object already exists:
"REVOKE "OEM_ADVISOR" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "OEM_MONITOR""
IMP-00015: following statement failed because the object already exists:
"REVOKE "OEM_MONITOR" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "WM_ADMIN_ROLE""
IMP-00015: following statement failed because the object already exists:
"REVOKE "WM_ADMIN_ROLE" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "JAVAUSERPRIV""
IMP-00015: following statement failed because the object already exists:
"REVOKE "JAVAUSERPRIV" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "JAVAIDPRIV""
IMP-00015: following statement failed because the object already exists:
"REVOKE "JAVAIDPRIV" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "JAVASYSPRIV""
IMP-00015: following statement failed because the object already exists:
"REVOKE "JAVASYSPRIV" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "JAVADEBUGPRIV""
IMP-00015: following statement failed because the object already exists:
"REVOKE "JAVADEBUGPRIV" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "EJBCLIENT""
IMP-00015: following statement failed because the object already exists:
"REVOKE "EJBCLIENT" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "JAVA_ADMIN""
IMP-00015: following statement failed because the object already exists:
"REVOKE "JAVA_ADMIN" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "JAVA_DEPLOY""
IMP-00015: following statement failed because the object already exists:
"REVOKE "JAVA_DEPLOY" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "CTXAPP""
IMP-00015: following statement failed because the object already exists:
"REVOKE "CTXAPP" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "XDBADMIN""
IMP-00015: following statement failed because the object already exists:
"REVOKE "XDBADMIN" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "XDBWEBSERVICES""
IMP-00015: following statement failed because the object already exists:
"REVOKE "XDBWEBSERVICES" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "OLAP_DBA""
IMP-00015: following statement failed because the object already exists:
"REVOKE "OLAP_DBA" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "OLAP_USER""
IMP-00015: following statement failed because the object already exists:
"REVOKE "OLAP_USER" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "MGMT_USER""
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "MVIEW$_ADVSEQ_GENERIC" MINVALUE 1 MAXVALUE 4294967295 INCR"
"EMENT BY 1 START WITH 1 CACHE 50 NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "MVIEW$_ADVSEQ_ID" MINVALUE 1 MAXVALUE 4294967295 INCREMENT"
" BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "LOGMNR_EVOLVE_SEQ$" MINVALUE 1 MAXVALUE 999999999999999999"
"999999999 INCREMENT BY 1 START WITH 1 CACHE 20 ORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "LOGMNR_SEQ$" MINVALUE 1 MAXVALUE 9999999999999999999999999"
"99 INCREMENT BY 1 START WITH 1 CACHE 20 ORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "LOGMNR_UIDS$" MINVALUE 1 MAXVALUE 999999999999999999999999"
"999 INCREMENT BY 1 START WITH 100 CACHE 20 ORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "REPCAT$_FLAVORS_S" MINVALUE -2147483647 MAXVALUE 214748364"
"7 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "REPCAT$_FLAVOR_NAME_S" MINVALUE 1 MAXVALUE 999999999999999"
"999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "REPCAT$_REPPROP_KEY" MINVALUE 1 MAXVALUE 99999999999999999"
"9999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "REPCAT_LOG_SEQUENCE" MINVALUE 1 MAXVALUE 99999999999999999"
"9999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "REPCAT$_REFRESH_TEMPLATES_S" MINVALUE 1 MAXVALUE 999999999"
"999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "REPCAT$_USER_AUTHORIZATIONS_S" MINVALUE 1 MAXVALUE 9999999"
"99999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "REPCAT$_TEMPLATE_REFGROUPS_S" MINVALUE 1 MAXVALUE 99999999"
"9999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "REPCAT$_TEMPLATE_OBJECTS_S" MINVALUE 1 MAXVALUE 9999999999"
"99999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "REPCAT$_TEMPLATE_PARMS_S" MINVALUE 1 MAXVALUE 999999999999"
"999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "REPCAT$_USER_PARM_VALUES_S" MINVALUE 1 MAXVALUE 9999999999"
"99999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "REPCAT$_TEMPLATE_SITES_S" MINVALUE 1 MAXVALUE 999999999999"
"999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "REPCAT$_TEMP_OUTPUT_S" MINVALUE 1 MAXVALUE 999999999999999"
"999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "REPCAT$_RUNTIME_PARMS_S" MINVALUE 1 MAXVALUE 9999999999999"
"99999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "TEMPLATE$_TARGETS_S" MINVALUE 1 MAXVALUE 99999999999999999"
"9999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "REPCAT$_EXCEPTIONS_S" MINVALUE 1 MAXVALUE 9999999999999999"
"99999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
. importing OLAPSYS's objects into OLAPSYS
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "OLAP_ID_SEQ" MINVALUE 1 MAXVALUE 9999999999999999999999999"
"99 INCREMENT BY 1 START WITH 122 NOCACHE NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "OLAP_IRID" MINVALUE 1 MAXVALUE 999999999999999999999999999"
" INCREMENT BY 1 START WITH 24 NOCACHE ORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "CWM2_OLAP_ENABLESEQ" MINVALUE 1 MAXVALUE 9999 INCREMENT BY"
" 1 START WITH 1 NOCACHE ORDER CYCLE"
I've been waiting for hours, but still it is blocked at the same place, that is:
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "CWM2_OLAP_ENABLESEQ" MINVALUE 1 MAXVALUE 9999 INCREMENT BY"
" 1 START WITH 1 NOCACHE ORDER CYCLE"
I've tried recreating the database, but still the error is the same.
I've tried including the ignore=Y, that is:
C:\DevSuiteHome_1\BIN>imp system/system@nandita1 FILE=system_21Sep2010_DVSD.DMP
FULL=YES IGNORE=YES
The error generated is as displayed below:
Import: Release 10.1.0.4.2 - Production on Wed Oct 6 16:34:04 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc
tion
With the Partitioning, OLAP and Data Mining options
Export file created by EXPORT:V10.01.00 via conventional path
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
. importing OLAPSYS's objects into OLAPSYS
Over here also, i had to kill the process since it was blocked at the following statement: ". importing OLAPSYS's objects into OLAPSYS"
Please can someone help me out.
Thanking in advanced

plzzzzzzzzzzzzzzzzz.............sme1 help me out

Error while using DB Adapter in BPEL process

Hi All,
I am getting error while using DB Adapter in BPEL process
java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:575) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:381) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:298) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.el.parser.AstValue.invoke(AstValue.java:157) at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283) at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53) at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1259) at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:97) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:91) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:698) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:285) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) Caused by: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:260) at oracle.sysman.emSDK.webservices.wsdlparser.OperationInfoImpl.invokeWithDispatch(OperationInfoImpl.java:985) at oracle.sysman.emas.model.wsmgt.PortName.invokeOperation(PortName.java:729) at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:569) ... 69 more Caused by: javax.xml.ws.soap.SOAPFaultException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:955) at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:750) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:234) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:105) at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:256) ... 72 more
I have created jndi from console which I have mentioned in DBAdapter and I have provided details of JNDI to DbAdapter in deployment.
I am not able to solve this.
Can you please let me know solution for this or provide me link for tutorial of DBAdapter for stored procdure call?

did u deploy your dbadapter through console to the plan mentioned for deployment?

In Oracle 10g Error while using COLLECT

I getting error while using collect in 10g
SQL> ed
Wrote file afiedt.buf
1 SELECT deptno
2 , COLLECT(ename) AS emps
3 FROM emp
4 GROUP BY
5* deptno
SQL> /
, COLLECT(ename) AS emps
ERROR at line 2:
ORA-00932: inconsistent datatypes: expected NUMBER got -
Please give me the solution.

you are using old version of SQL*Plus. if you use later version it will give you correct result.
Edited by: unus on Mar 14, 2010 4:25 AM

Error while loading the WSLD file

Hi all
I am trying to consume a Webservice. When i try to create the Model out of the WSDL file, it says "Error while loading the WSDL file".
Its an XI webservice, so i cannot view it from Webservice navigator.
How could i find out that, the problem is with the Webservice or i am missing any thing
Kindly help
regards
Deepu

Hi
I checked the log and i am getting the following exceptions
1.DynamicProxy.TempDir=C:\DOCUME1\DEEPUM1\LOCALS~1\Temp\, DynamicProxy.INetProxy.Host=}'
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:413)
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.WebserviceClientException: GenericServiceFactory initialization problem. Could not load web service model.
2. Caused by: com.sap.engine.lib.xml.util.NestedException: IO Exception occurred while parsing file:Invalid Response Code: (401) Unauthorized. The requested URL was:"http://Pinnacle:50000/XISOAPAdapter/MessageServlet?channel=:PowerEP_BusService:Out_SOAP_DocViewDownload" -> com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL
3. java.lang.NullPointerException
at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DOperationImpl.initParameters_DocumentStyle(DOperationImpl.java:59)
Is this any authorization problem
regards
Deepu

Error while updating the configuration files (MOB20003)

hi,
After installing the BI 4.0 server, i am trying to configure mobile using mobile server configuration tool. When i enter all the information for non Blackberry option as i would like to access through ipad, its giving me the error message" Error while updating the configuration files (MOB20003)" Please advise.

Hi Somesh,
If i am not wrong, only a war file deployment is needed to make ipad work.
This happens with URL hitting directly on the Server.
If you want to configure VAS and VMS servers, let us know what configuration settings have been done.
Regards,
Atul

"llegal character in path at index" Error While Using wsimport from ant.

Hi,
I am getting the following error, while using wsimport from ant build script. you have the details below. I dont have a clue on this error.
Error :
wsimport:
[echo] Generating the client stubs
[wsimport] error: Unable to parse "HelloService_schema1.xsd" : Illegal character in path at index 25: file:/D:/Study/WebService Eclipse Project/examples/jaxws/helloservice/service/server/wsdl/HelloService.wsdl#types?schema1
[wsimport] line 0 of file:/D:/Study/WebService Eclipse Project/examples/jaxws/helloservice/service/server/wsdl/HelloService.wsdl#types?schema1
[wsimport] error: Unable to parse "HelloService_schema1.xsd" : Illegal character in path at index 25: file:/D:/Study/WebService Eclipse Project/examples/jaxws/helloservice/service/server/wsdl/HelloService.wsdl#types?schema1
[wsimport] line ? of file:/D:/Study/WebService Eclipse Project/examples/jaxws/helloservice/service/server/wsdl/HelloService.wsdl#types?schema1
[wsimport] error: Element "{http://endpoint.helloservice/}sayHello" not found.
Java WebService :
package helloservice.endpoint;
import javax.jws.WebMethod;
import javax.jws.WebService;
@WebService()
public class Hello {
private String message = new String("Hello, ");
@WebMethod()
public String sayHello(String name) {
return message + name + ".";
Ant Build.xml
<project name="${project.name}" basedir="." default="ear">
     <property file="WS_build.properties"/>
     <target name="init">
          
          <echo description="Setting the path for the project"/>
          <path id="classpath">
               <fileset dir="${lib.dir}" includes="*.jar"/>
               <fileset dir="${commonWSLib.dir}" includes="*.jar"/>
          </path>
          
          <echo description="WSGEN Definition"/>
          <taskdef name="wsgen" classname="com.sun.tools.ws.ant.WsGen">
               <classpath>
                    <path refid="classpath"/>
               </classpath>
          </taskdef>
          
          <echo description="WSImport Definition" />
          <taskdef name="wsimport" classname="com.sun.tools.ws.ant.WsImport">
               <classpath>
                    <path refid="classpath"/>
               </classpath>
          </taskdef>
     </target>
     <target name="Compile" depends="init">
          <echo description="Compiling the project"/>
          <mkdir dir="${build.dir}"/>
          <mkdir dir="${build.dir}/classes"/>
          <javac destdir="${build.dir}/classes" srcdir="${java.base}">
               <classpath>
                    <path refid="classpath"/>
               </classpath>
          </javac>
          <copy todir="${build.dir}/classes">
               <fileset dir="${java.base}" excludes="**/*.java"/>
          </copy>
     </target>
     <target name="wsgen" depends="Compile">
               <echo message="Generating the wsdl file[${project.name}Service.wsdl]" />
               <mkdir dir="${service.dir}"/>
               <mkdir dir="${service.dir}/server"/>
               <mkdir dir="${service.dir}/server/classes"/>
               <mkdir dir="${service.dir}/server/src"/>
               <mkdir dir="${service.dir}/server/wsdl"/>
               <wsgen sei="${sei.class}" destdir="${service.dir}/server/classes" genwsdl="true"
               sourcedestdir="${service.dir}/server/src" resourcedestdir="${service.dir}/server/wsdl">
                    <classpath>
                         <path refid="classpath" />
                         <pathelement location="${build.dir}/classes" />
                    </classpath>
               </wsgen>
     </target>
     <target name="copy" depends="wsgen">
               <echo message="Copying class and config files into ${web-inf.dir} folder" />
               <copy todir="${web-inf.dir}">
                    <fileset dir="${build.dir}"/>
                    <fileset dir="${service.dir}/server" includes="**/*.class"/>
                    <fileset dir="." includes="${lib.dir}/*.jar"/>
               </copy>
               <copy todir="${web-inf.dir}/${lib.dir}">
                    <fileset dir="${commonWSLib.dir}" includes="*.jar"/>
               </copy>
               <copy todir="${web-inf.dir}">
                    <fileset dir="${web-inf.dir}" includes="**/*.xml"/>
               </copy>
     </target>
     
     <target name="war" depends="copy">
          <echo message="Creating the war file [${project.name}.war]" />
          <mkdir dir="${dist.dir}"/>
          <mkdir dir="${dist.dir}/server"/>
          <war destfile="${dist.dir}/server/${project.name}.war" webxml="${web-inf.dir}/web.xml" basedir="${web.dir}"/>
     </target>
     <target name="wsimport" depends="war">
          <echo message="Generating the client stubs" />
          <mkdir dir="${service.dir}"/>
          <mkdir dir="${service.dir}/client"/>
          <mkdir dir="${service.dir}/client/classes"/>
          <mkdir dir="${service.dir}/client/src"/>
          <wsimport wsdl="${basedir}/${service.dir}/server/wsdl/${project.name}.wsdl"
               destdir="${service.dir}/client/classes"
               package="${wsimport.package}"
               sourcedestdir="${service.dir}/client/src">
          </wsimport>
     </target>
     <target name="clientjar" depends="wsimport">
<echo message="Creating the client jar file [${project.name}Client.jar] " />
<copy todir="${service.dir}/client/classes">
<fileset dir="${service.dir}/client/src"/>
</copy>
<mkdir dir="${dist.dir}/client"/>
               <tstamp>
               <format property="TODAY" pattern="yyyy-MM-dd hh:mm:ss" />
               </tstamp>
<jar destfile="${dist.dir}/client/${project.name}Client.jar"
basedir="${service.dir}/client/classes">
               <manifest>
               <attribute name="Built-By" value="${user.name}"/>
               <attribute name="Built-Date" value="${TODAY}"/>
               <attribute name="Implementation-Version" value="${version}-b${build.number}"/>
          </manifest>
          </jar>
<mkdir dir="${dist.dir}/client"/>
     </target>
     
     <target name="enginejar" depends="clientjar">
     <echo message="Creating the engine jar file for local call [${project.name}.jar] " />
          
          <tstamp>
               <format property="TODAY" pattern="yyyy-MM-dd hh:mm:ss" />
          </tstamp>
     <jar destfile="${dist.dir}/server/${project.name}.jar"
     basedir="${build.dir}/classes">
               <manifest>
                    <attribute name="Built-By" value="${user.name}"/>
                    <attribute name="Built-Date" value="${TODAY}"/>
                    <attribute name="Implementation-Version" value="${version}-b${build.number}"/>
          </manifest>
          </jar>
          </target>
          
          <target name="ear" depends="enginejar" >
               <echo message="Creating the ear file [${project.name}.ear]" />
               <ear destfile="${dist.dir}/server/${project.name}.ear" appxml="META-INF/application.xml">
               <fileset dir="${dist.dir}/server" includes="${project.name}.war"/>
          </ear>
               <antcall target="clean"></antcall>
          </target>
          
          <target name="clean">
               <echo message="Cleaning up folders " />
               <delete dir="${build.dir}"/>
               <delete dir="${service.dir}"/>
               <delete dir="${web-inf.dir}/classes"/>
               <delete dir="${web-inf.dir}/lib"/>
               <echo message="${project.name}.ear, ${project.name}.war, ${project.name}.jar and ${project.name}Client.jar is available in project's ${dist.dir} folder"/>
          </target>
</project>
Generated wsdl(HelloService.wsdl) :
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<definitions targetNamespace="http://endpoint.helloservice/" name="HelloService" xmlns:tns="http://endpoint.helloservice/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns="http://schemas.xmlsoap.org/wsdl/">
<types>
<xsd:schema>
<xsd:import namespace="http://endpoint.helloservice/" schemaLocation="HelloService_schema1.xsd"/>
</xsd:schema>
</types>
<message name="sayHello">
<part name="parameters" element="tns:sayHello"/>
</message>
<message name="sayHelloResponse">
<part name="parameters" element="tns:sayHelloResponse"/>
</message>
<portType name="Hello">
<operation name="sayHello">
<input message="tns:sayHello"/>
<output message="tns:sayHelloResponse"/>
</operation>
</portType>
<binding name="HelloPortBinding" type="tns:Hello">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/>
<operation name="sayHello">
<soap:operation soapAction=""/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
</operation>
</binding>
<service name="HelloService">
<port name="HelloPort" binding="tns:HelloPortBinding">
<soap:address location="REPLACE_WITH_ACTUAL_URL"/>
</port>
</service>
</definitions>
Generated : HelloService_schema1.xsd
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<xs:schema version="1.0" targetNamespace="http://endpoint.helloservice/" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="sayHello" type="ns1:sayHello" xmlns:ns1="http://endpoint.helloservice/"/>
<xs:complexType name="sayHello">
<xs:sequence>
<xs:element name="arg0" type="xs:string" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
<xs:element name="sayHelloResponse" type="ns2:sayHelloResponse" xmlns:ns2="http://endpoint.helloservice/"/>
<xs:complexType name="sayHelloResponse">
<xs:sequence>
<xs:element name="return" type="xs:string" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
If u need any other information let me know.

This has been resolved by uploading relevant jar file

Error while using odi out file

Similar Messages

Maybe you are looking for