Error while using SQL* PLUS due to PUPBLD.SQL script

DATABASE: 10G Release2
Upon creation of a database, while accessing a schema using sqlplus i received the error
Error accessing PRODUCT_USER_PROFILE
Warning: Product user profile information not loaded!
You may need to run PUPBLD.SQL as SYSTEMSo i logged in as SYSTEM and ran @$ORACLE_HOME/sqlplus/admin/pupbld.sql. But i am still getting the above mentioned error when try to log in to a schema. Before i executed pupbld.sql , i mistakenly executed this script while i was logged in as SYS. Could this be the problem?
This is what i get when i execute pupbld.sql logged in as SYSTEM
SQL> @$ORACLE_HOME/sqlplus/admin/pupbld.sql
DROP SYNONYM PRODUCT_USER_PROFILE
ERROR at line 1:
ORA-01434: private synonym to be dropped does not exist
DATE_VALUE FROM PRODUCT_USER_PROFILE
ERROR at line 3:
ORA-00980: synonym translation is no longer valid
DROP TABLE PRODUCT_USER_PROFILE
ERROR at line 1:
ORA-00942: table or view does not exist
ALTER TABLE SQLPLUS_PRODUCT_PROFILE ADD (LONG_VALUE LONG)
ERROR at line 1:
ORA-00942: table or view does not exist
Table created.
DROP TABLE PRODUCT_PROFILE
ERROR at line 1:
ORA-00942: table or view does not exist
DROP VIEW PRODUCT_PRIVS
ERROR at line 1:
ORA-00942: table or view does not exist
View created.
Grant succeeded.
Synonym dropped.
Synonym created.
DROP SYNONYM PRODUCT_USER_PROFILE
ERROR at line 1:
ORA-01434: private synonym to be dropped does not exist
Synonym created.
Synonym dropped.
Synonym created.
SQL>
SQL> show user
USER is "SYSTEM"
SQL> @$ORACLE_HOME/sqlplus/admin/pupbld.sql
Synonym dropped.
CREATE TABLE SQLPLUS_PRODUCT_PROFILE AS
ERROR at line 1:
ORA-00955: name is already used by an existing object
DROP TABLE PRODUCT_USER_PROFILE
ERROR at line 1:
ORA-00942: table or view does not exist
ALTER TABLE SQLPLUS_PRODUCT_PROFILE ADD (LONG_VALUE LONG)
ERROR at line 1:
ORA-01430: column being added already exists in table
CREATE TABLE SQLPLUS_PRODUCT_PROFILE
ERROR at line 1:
ORA-00955: name is already used by an existing object
DROP TABLE PRODUCT_PROFILE
ERROR at line 1:
ORA-00942: table or view does not exist
View dropped.
View created.
Grant succeeded.
Synonym dropped.
Synonym created.
DROP SYNONYM PRODUCT_USER_PROFILE
ERROR at line 1:
ORA-01434: private synonym to be dropped does not exist
Synonym created.
Synonym dropped.
Synonym created.
SQL>

Hi,
You'll need to tidy-up the failed install in the sys schema, then run pupbld again as system.
The easiest way to tidy up sys is to run the drop statments in the pupbld script while attached as sys. You can get a list of the drop commands by grepping the script for 'drop'...
grep -i drop $ORACLE_HOME/sqlplus/admin/pupbld.sql
..review the output - if your happy, copy&past it into sqlplus. Then connect as system and run pupbld again.
Cheers,
Andy Barry
http://www.shutdownabort.com

Similar Messages

Oracle discoverer ver 9.0.2.39.02 - Error While using discoverer plus

Hi,
I have installed oracle 9i discoverer ver 9.0.2.39.02 and while tyring to use Discoverer Plus (http://ip:port/discoverer/plus)
I get error when creaating a workbook using workbook wizard, if i go thru the steps 1 to 10 It just does'nt do anything when i click Finish. At the same time
If i click Finish on the Table layout screen immediately after selecting the items it generates the worksheet
what could be the reason for me unable to generate the worksheet.
Create / edit Business Privilege is granted to the user.
can anybody help me.
Thanks

Hi
But Desktop is not the product that you reported the error on, you said that Plus was giving you the problem.
Desktop generally has far fewer issues that Plus because it is a client-based tool and I would expect it to work fine in Desktop.
Have you ever had 9.0.2 Plus working as you describe or have you recently installed it? Either way, I strongly recommend upgrading your Discoverer Plus to the version in my previous reply.
By the way, I think you will find that most people rapidly got off 9.0.2 as soon as 9.0.4 came out which was 10g Release 1. If you look on my blog: http://learndiscoverer.blogspot.com/ you will see a couple of surveys that were conducted earlier this year. The top one indicates that only 4% of Discoverer sites are using 9.0.2. Of those I would suggest most will be on the 54 release which really was quite stable.
You will fnd it really hard to get help if you stay on the 39 release because there are so few folks around who have it installed.
Best wishes
Michael

ORA-01458 error while using Pro*C to invoke PL/SQL procedure, pls help

I am using Pro*C (Oracle 10g on Itanium platform) to invoke PL/SQL procedure to read RAW data from database, but always encoutered ORA-01458 error message.
Here is the snippet of Pro*C code:
typedef struct dataSegment
     unsigned short     len;
     unsigned char     data[SIZE_DATA_SEG];
} msg_data_seg;
EXEC SQL TYPE msg_data_seg IS VARRAW(SIZE_DATA_SEG);
     EXEC SQL BEGIN DECLARE SECTION;
          unsigned short qID;
          int rMode;
          unsigned long rawMsgID;
          unsigned long msgID;
          unsigned short msgType;
          unsigned short msgPriority;
          char recvTime[SIZE_TIME_STRING];
          char schedTime[SIZE_TIME_STRING];
          msg_data_seg dataSeg;
          msg_data_seg dataSeg1;
          msg_data_seg dataSeg2;
          short     indSeg;
          short     indSeg1;
          short     indSeg2;
     EXEC SQL END DECLARE SECTION;
     qID = q_id;
     rMode = (int)mode;
     EXEC SQL EXECUTE
          BEGIN
               SUMsg.read_msg (:qID, :rMode, :rawMsgID, :msgID, :msgType, :msgPriority, :recvTime,
                    :schedTime, :dataSeg:indSeg, :dataSeg1:indSeg1, :dataSeg2:indSeg2);
          END;
     END-EXEC;
     // Check PL/SQL execute result, different from SQL
     // Only 'sqlcode' and 'sqlerrm' are always set
     if (sqlca.sqlcode != 0)
          if (sqlca.sqlcode == ERR_QUEUE_EMPTY)          // Queue empty
               throw q_eoq ();
          char msg[513];                                        // Other errors
          size_t msg_len;
          msg_len = sqlca.sqlerrm.sqlerrml;
          strncpy (msg, sqlca.sqlerrm.sqlerrmc, msg_len);
          msg[msg_len] = '\0';
          throw db_error (string(msg), sqlca.sqlcode);
and here is the PL/SQL which is invoked:
SUBTYPE VarChar14 IS VARCHAR2(14);
PROCEDURE read_msg (
     qID          IN     sumsg_queue_def.q_id%TYPE,
     rMode          IN     INTEGER,
     raw_msgID     OUT     sumsg_msg_data.raw_msg_id%TYPE,
     msgID          OUT sumsg_msg_data.msg_id%TYPE,
     msgType          OUT sumsg_msg_data.type%TYPE,
     msgPrior     OUT sumsg_msg_data.priority%TYPE,
     msgRecv          OUT VarChar14,
     msgSched     OUT VarChar14,
     msgData          OUT sumsg_msg_data.msg_data%TYPE,
     msgData1     OUT sumsg_msg_data.msg_data1%TYPE,
     msgData2     OUT sumsg_msg_data.msg_data2%TYPE
) IS
BEGIN
     IF rMode = 0 THEN
          SELECT raw_msg_id, msg_id, type, priority, TO_CHAR(recv_time, 'YYYYMMDDHH24MISS'),
               TO_CHAR(sched_time, 'YYYYMMDDHH24MISS'), msg_data, msg_data1, msg_data2
               INTO raw_msgID, msgID, msgType, msgPrior, msgRecv, msgSched, msgData, msgData1, msgData2
               FROM (SELECT * FROM sumsg_msg_data WHERE q_id = qID AND status = 0 ORDER BY sched_time, raw_msg_id)
               WHERE ROWNUM = 1;
     ELSIF rMode = 1 THEN
          SELECT raw_msg_id, msg_id, type, priority, TO_CHAR(recv_time, 'YYYYMMDDHH24MISS'),
               TO_CHAR(sched_time, 'YYYYMMDDHH24MISS'), msg_data, msg_data1, msg_data2
               INTO raw_msgID, msgID, msgType, msgPrior, msgRecv, msgSched, msgData, msgData1, msgData2
               FROM (SELECT * FROM sumsg_msg_data WHERE q_id = qID AND status = 0 ORDER BY recv_time, raw_msg_id)
               WHERE ROWNUM = 1;
     ELSE
          SELECT raw_msg_id, msg_id, type, priority, TO_CHAR(recv_time, 'YYYYMMDDHH24MISS'),
               TO_CHAR(sched_time, 'YYYYMMDDHH24MISS'), msg_data, msg_data1, msg_data2
               INTO raw_msgID, msgID, msgType, msgPrior, msgRecv, msgSched, msgData, msgData1, msgData2
               FROM (SELECT * FROM sumsg_msg_data WHERE q_id = qID AND status = 0 ORDER BY priority, raw_msg_id)
               WHERE ROWNUM = 1;
     END IF;
     UPDATE sumsg_msg_data SET status = 1 WHERE raw_msg_id = raw_msgID;
EXCEPTION
     WHEN NO_DATA_FOUND THEN
          raise_application_error (-20102, 'Queue empty');
END read_msg;
where sumsg_msg_data.msg_data%TYPE, sumsg_msg_data.msg_data1%TYPE and sumsg_msg_data.msg_data2%TYPE are all defined as RAW(2000). When I test the PL/SQL code seperately, everything is ok, but if I use the Pro*C code to read, the ORA-01458 always happen, unless I change the SIZE_DATA_SEG value to 4000, then it passes, and the result read out also seems ok, either the bigger or smaller value will encounter ORA-01458.
I think the problem should happen between the mapping from internal datatype to external VARRAW type, but cannot understand why 4000 bytes buffer will be ok, is it related to some NLS_LANG settings, anyone can help me to resolve this problme, thanks a lot!

It seems that I found the way to avoid this error. Now each time before I read RAW(2000) data from database, i initialize the VARRAW.len first, set its value to SIZE_DATA_SEG, i.e., the outside buffer size, then the error disappear.
Oracle seems to need this information to handle its data mapping, but why output variable also needs this initialization, cannot precompiler get this from the definition of VARRAW structure?
Anyone have some suggestion?

In Oracle 10g Error while using COLLECT

I getting error while using collect in 10g
SQL> ed
Wrote file afiedt.buf
1 SELECT deptno
2 , COLLECT(ename) AS emps
3 FROM emp
4 GROUP BY
5* deptno
SQL> /
, COLLECT(ename) AS emps
ERROR at line 2:
ORA-00932: inconsistent datatypes: expected NUMBER got -
Please give me the solution.

you are using old version of SQL*Plus. if you use later version it will give you correct result.
Edited by: unus on Mar 14, 2010 4:25 AM

Error while Assigning database level role (db_datareader) to SQL login (Domain Account)

Team,
I got an error while creating a User for Domain Account. Below is the screen shot of the error (error : 15401)
Database instance is on SQL 2000 SP3. ( I know it is out of support, But the customer is relutanct to upgrade)
On Google search, i found below article which is best matching for this error
http://support.microsoft.com/kb/324321
I have follows each step of troubleshooting. But still the issue persists.
Step 1. The login does not exist == The login is very much exist in the domain as i am able to add the same domain id to other database instances
Step 2. Duplicate security identifiers == i have used this query to find duplicate SID
/* SELECT name FROM syslogins WHERE sid = SUSER_SID ('YourDomain\YourLogin') */
But there was only one row returned with create date of today's.
Error while Assigning database level role (db_datareader) to SQL login (Domain Account)
Step 3. Authentication failure == Domain is available. User is able to login on other servers via RDP connection.
Step 4. Case sensitivity == Database collation is set to Case insensitivity. (CI)
Other two 5. Local Accounts & 6. Name resolution == is not applicable to me.
I tried other ways also.
A. Creating login and providing permission in one go only = User account is not created
B. Instead of GUI, use query to create login and provide required permission = Same error.
Does anybody has faced any such situation
Chetan

See the below output
srvid
sid
xstatus
xdate1
xdate2
name
password
dbid
language
isrpcinmap
ishqoutmap
selfoutmap
NULL
0x010500000000000515000000A1F66E1BFC1DC75D26E72530A2B80400
14
20:25.9
57:33.4
UKBAA\LHRAPPMuttavarapuS
NULL
1
us_english
0
0
0
Chetan

OSB: Cannot acquire data source error while using JCA DBAdapter in OSB

Hi All,
I've entered 'Cannot acquire data source' error while using JCA DBAdapter in OSB.
Error infor are as follows:
The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapter1/RetrievePersonService [ RetrievePersonService_ptt::RetrievePersonServiceSelect(RetrievePersonServiceSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'RetrievePersonServiceSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/soademoDatabase].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.soademoDatabase'. Resolved 'jdbc'; remaining name 'soademoDatabase'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
JNDI Name for the Database pool: eis/DB/soademoDatabase
JNDI Name for the Data source: jdbc/soademoDatabase
I created a basic DBAdapter in JDeveloper, got the xsd file, wsdl file, .jca file and the topLink mapping file imported them into OSB project.
Then I used the .jca file to generate a business service, and tested, then the error occurs as described above.
Login info in RetrievePersonService-or-mappings.xml
<login xsi:type="database-login">
<platform-class>org.eclipse.persistence.platform.database.oracle.Oracle9Platform</platform-class>
<user-name></user-name>
<connection-url></connection-url>
</login>
jca file content are as follows:
<adapter-config name="RetrievePersonService" adapter="Database Adapter" wsdlLocation="RetrievePersonService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/soademoDatabase" UIConnectionName="Connection1" adapterRef=""/>
<endpoint-interaction portType="RetrievePersonService_ptt" operation="RetrievePersonServiceSelect">
<interaction-spec className="oracle.tip.adapter.db.DBReadInteractionSpec">
<property name="DescriptorName" value="RetrievePersonService.PersonT"/>
<property name="QueryName" value="RetrievePersonServiceSelect"/>
<property name="MappingsMetaDataURL" value="RetrievePersonService-or-mappings.xml"/>
<property name="ReturnSingleResultSet" value="false"/>
<property name="GetActiveUnitOfWork" value="false"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
RetrievePersonService_db.wsdl are as follows:
<?xml version="1.0" encoding="UTF-8"?>
<WL5G3N0:definitions name="RetrievePersonService-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
<WL5G3N0:import location="RetrievePersonService.wsdl" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService"/>
<WL5G3N0:binding name="RetrievePersonService_ptt-binding" type="WL5G3N1:RetrievePersonService_ptt">
<WL5G3N2:binding style="document" transport="http://www.bea.com/transport/2007/05/jca"/>
<WL5G3N0:operation name="RetrievePersonServiceSelect">
<WL5G3N2:operation soapAction="RetrievePersonServiceSelect"/>
<WL5G3N0:input>
<WL5G3N2:body use="literal"/>
</WL5G3N0:input>
<WL5G3N0:output>
<WL5G3N2:body use="literal"/>
</WL5G3N0:output>
</WL5G3N0:operation>
</WL5G3N0:binding>
<WL5G3N0:service name="RetrievePersonService_ptt-bindingQSService">
<WL5G3N0:port binding="WL5G3N1:RetrievePersonService_ptt-binding" name="RetrievePersonService_ptt-bindingQSPort">
<WL5G3N2:address location="jca://eis/DB/soademoDatabase"/>
</WL5G3N0:port>
</WL5G3N0:service>
</WL5G3N0:definitions>
Any suggestion is appricated .
Thanks in advance!
Edited by: user11262117 on Jan 26, 2011 5:28 PM

Hi Anuj,
Thanks for your reply!
I found that the data source is registered on server soa_server1 as follows:
Binding Name: jdbc.soademoDatabase
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 80328036
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/291])/291
Binding Name: jdbc.SOADataSource
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 92966755
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/285])/285
I don't know how to determine which server the DBAdapter is targetted to.
But I found the following information:
Under Deoloyment->DBAdapter->Monitoring->Outbound Connection Pools
Outbound Connection Pool Server State Current Connections Created Connections
eis/DB/SOADemo AdminServer Running 1 1
eis/DB/SOADemo soa_server1 Running 1 1
eis/DB/soademoDatabase AdminServer Running 1 1
eis/DB/soademoDatabase soa_server1 Running 1 1
The DbAdapter is related to the following files:
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ DBPlan\ Plan. xml
I unzipped DbAdapter.rar, opened weblogic-ra.xml and found that there's only one data source is registered:
<?xml version="1.0"?>
<weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
<enable-global-access-to-classes>true</enable-global-access-to-classes>
<outbound-resource-adapter>
<default-connection-properties>
<pool-params>
<initial-capacity>1</initial-capacity>
<max-capacity>1000</max-capacity>
</pool-params>
<properties>
<property>
<name>usesNativeSequencing</name>
<value>true</value>
</property>
<property>
<name>sequencePreallocationSize</name>
<value>50</value>
</property>
<property>
<name>defaultNChar</name>
<value>false</value>
</property>
<property>
<name>usesBatchWriting</name>
<value>true</value>
</property>
<property>
<name>usesSkipLocking</name>
<value>true</value>
</property>
</properties>
          </default-connection-properties>
<connection-definition-group>
<connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
<connection-instance>
<jndi-name>eis/DB/SOADemo</jndi-name>
          <connection-properties>
               <properties>
               <property>
               <name>xADataSourceName</name>
               <value>jdbc/SOADataSource</value>
               </property>
               <property>
               <name>dataSourceName</name>
               <value></value>
               </property>
               <property>
               <name>platformClassName</name>
               <value>org.eclipse.persistence.platform.database.Oracle10Platform</value>
               </property>
               </properties>
          </connection-properties>
</connection-instance>
</connection-definition-group>
</outbound-resource-adapter>
</weblogic-connector>
Then I decided to use eis/DB/SOADemo for testing.
For JDeveloper project, after I deployed to weblogic server, it works fine.
But for OSB project referencing wsdl, jca and mapping file from JDeveloper project, still got the same error as follows:
BEA-380001: Invoke JCA outbound service failed with application error, exception:
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapterTest/DBReader [ DBReader_ptt::DBReaderSelect(DBReaderSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'DBReaderSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
It almost drive me crazy!!:-(
What's the purpose of 'weblogic-ra.xml' under the folder of 'C:\Oracle\Middleware\home_11gR1\Oracle_OSB1\lib\external\adapters\META-INF'?
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Error while using UTL_FILE

I am getting the following error while using UTL_FILE procedure while using UTL_FILE.FOPEN procedure
from system account. I am using Windows XP with NTFS.
SQL> create or replace directory FILE_DIR as 'C:\'
2 /
Directory created.
SQL> grant read on directory FILE_DIR to public;
Grant succeeded.
1 create or replace PROCEDURE file_upload IS
2 v_file_name VARCHAR2(200);
3 v_file_type UTL_FILE.FILE_TYPE;
4 v_line VARCHAR2(1000);
5 BEGIN
6 v_file_name := 'customers_'||TO_CHAR(SYSDATE,'dd')||TO_CHAR(SYSDATE,'MON')||TO_CHAR(SYSDATE,'YYYY')||'.txt';
7 v_file_type := UTL_FILE.FOPEN('FILE_DIR','V_FILE_NAME','r',1000);
8 UTL_FILE.GET_LINE(v_file_type,V_LINE,1000);
9 UTL_FILE.FCLOSE(v_file_type);
10 DBMS_OUTPUT.PUT_LINE(V_LINE);
11* END;
SQL> exec file_upload;
BEGIN file_upload; END;
ERROR at line 1:
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 475
ORA-29283: invalid file operation
ORA-06512: at "SYSTEM.FILE_UPLOAD", line 7
ORA-06512: at line 1
I appreciate if someone can help me in this regard.
Thanks in Advance.
Regards
Muhammad ALi

Hello,
What exactly are you trying to do? Here I got 2 examples for you , replace with your directory name and pick right option for 'a' (append) or 'w' (write) or 'R' (read).
To read from a directory_ . This will read an existing file 'customer.txt" from the directory
{code}
CREATE OR REPLACE PROCEDURE .file_upload
IS
v_file_name VARCHAR2 (200);
v_file_type UTL_FILE.file_type;
v_line VARCHAR2 (1000);
BEGIN
v_file_name := 'customers.txt';
v_file_type := UTL_FILE.fopen ('EXT_TABLES', v_file_name, 'R');
UTL_FILE.get_line (v_file_type, v_line); -- Error was here
DBMS_OUTPUT.put_line (v_line);
UTL_FILE.fclose (v_file_type);
END;
{code}
_*To open a file*_ This will create customer_XXXXX file under the directory
{code}
CREATE OR REPLACE PROCEDURE testme.file_upload
IS
v_file_name VARCHAR2 (200);
v_file_type UTL_FILE.file_type;
v_line VARCHAR2 (1000);
BEGIN
v_file_name := 'customers_'
|| TO_CHAR (SYSDATE, 'dd')
|| TO_CHAR (SYSDATE, 'MON')
|| TO_CHAR (SYSDATE, 'YYYY')
|| '.txt';
v_file_type := UTL_FILE.fopen ('EXT_TABLES', v_file_name, 'a');
UTL_FILE.put_line (v_file_type, v_line);
DBMS_OUTPUT.put_line (v_line);
UTL_FILE.fclose (v_file_type);
END;
{code}
Regards
Edited by: OrionNet on Jan 29, 2009 12:30 AM

Error while using DB Adapter in BPEL process

Hi All,
I am getting error while using DB Adapter in BPEL process
java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:575) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:381) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:298) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.el.parser.AstValue.invoke(AstValue.java:157) at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283) at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53) at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1259) at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:97) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:91) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:698) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:285) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) Caused by: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:260) at oracle.sysman.emSDK.webservices.wsdlparser.OperationInfoImpl.invokeWithDispatch(OperationInfoImpl.java:985) at oracle.sysman.emas.model.wsmgt.PortName.invokeOperation(PortName.java:729) at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:569) ... 69 more Caused by: javax.xml.ws.soap.SOAPFaultException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:955) at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:750) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:234) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:105) at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:256) ... 72 more
I have created jndi from console which I have mentioned in DBAdapter and I have provided details of JNDI to DbAdapter in deployment.
I am not able to solve this.
Can you please let me know solution for this or provide me link for tutorial of DBAdapter for stored procdure call?

did u deploy your dbadapter through console to the plan mentioned for deployment?

Error while using the export utility

Dear all of
I am getting the following error while using the export utility in the Oracle database 9i
I have run the catexp.sql and catrm.sql suggested by the experts in this forum. But it did not help me. Kindly help me in solving this issue.
FOLLOWING ARE THE ERROR ----------------------------
EXP-00008: ORACLE error 942 encountered
ORA-00942: table or view does not exist
EXP-00024: Export views not installed, please notify your DBA
EXP-00000: Export terminated unsuccessfully
-----------------------------------------------------------------------------------------------------------------------------------

Can you go to this discussion please.
Re: Getting a strange error for Exp
-aijaz

3-1674105521 Multiple Paths error while using Bridge Table

https://support.us.oracle.com/oip/faces/secure/srm/srview/SRViewStandalone.jspx?sr=3-1674105521
Customer Smiths Medical International Limited
Description: Multiple Paths error while using Bridge Table
1. I have a urgent customer encounterd a design issue and customer was trying to add 3 logical joins between SDI_GPOUP_MEMBERSHIP and these 3 tables (FACT_HOSPITAL_FINANCE_DTLS, FACT_HOSPITAL_BEDS_UTILZN and FACT_HOSPITAL_ATRIBUTES)
2. They found found out by adding these 3 joins, they ended with circular error.
[nQSError: 15001] Could not load navigation space for subject area GXODS.
[nQSError: 15009] Multiple paths exist to table DIM_SDI_CUSTOMER_DEMOGRAPHICS. Circular logical schemas are not supported.
In response to this circular error, the developer was able to bypass the error using aliases, but this is not desired by client.
3. They want to know how to avoid this error totally without using alias table and suggest a way to resolve the circular join(Multiple Path) error.
Appreciated if someone can give some pointer or suggestion as the customer is in stiff deadline.
Thanks
Teik

The strange thing compared to your output is that I get an error when I have table prefix in the query block:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE TMP1.A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
ORA-31693: Table data object "SYSADM"."TMP3" failed to load/unload and is being skipped due to error:
ORA-38500: Unsupported operation: Oracle XML DB not present
Job "SYSTEM"."SYS_IMPORT_FULL_01" completed with 1 error(s) at Fri Dec 13 10:39:11 2013 elapsed 0 00:00:03
And if I remove it, it works:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
. . imported "SYSADM"."TMP3" 5.406 KB 1 out of 2 rows
Job "SYSTEM"."SYS_IMPORT_FULL_01" successfully completed at Fri Dec 13 10:36:50 2013 elapsed 0 00:00:01
Nicolas.
PS: as you can see, I'm on 11.2.0.4, I do not have 11.2.0.1 that you seem to use.

Runtime Error while using Dynamic Selection

Hi,
We are getting a runtime error while using a dynamic selection. One of the fields has got an apostrophe in the middle of the text and so the condition is returning an error SAPSQL_WHERE_PARANTHESES.
Let's say the value in the field is SCV's. So the WHERETAB is filled as 'SCV's' or `SCV's`. An exception is caught in this case as there is no closing apostrophe.
Let us know if anyone has come across a similar issue and any help is appreciated.
Regards,
Sarves

Hi Sarves,
as Rob said.
check also the [ORACLE FAQS|http://www.orafaq.com/faq/how_does_one_escape_special_characters_when_writing_sql_queries] or [SQL SERVER u2013 How to Escape Single Quotes|http://blog.sqlauthority.com/2008/02/17/sql-server-how-to-escape-single-quotes-fix-error-105-unclosed-quotation-mark-after-the-character-string/]
Honestly: Before posting here and getting a whole lot of more or less useless comments just use your favorite search engine.
Regards,
Clemens

Error 45 Initializing In SQL*Plus When Running A Sql Script

Hi All
I have a daily scheduled jobs running on Windows server 2003 and 2008. Oracle Version :10.2.0.1 and 10.2.0.4
right now jobs are not even starting when i run them manually. Found the error Error 45 Initializing In SQL*Plus When Running A Sql Script.
it says Bug:3039738.
what is the solution to fix this Bug ?
thanks
Shawn

user9174724 wrote:
Hi
do you think the Problem is not with the script ?
when i run the job its reaching SQLPLUS and giving error
Error 45 Initializing In SQL*Plus When Running A Sql Script .
Server:windows 2003 and oracle version :10.2.0.1
CMD /C %ORACLE_HOME_PRIME%\bin\sqlplus.exe /NOLOG @ %xxxx_HOME%\DBA_Backup\BackupDo.sql testdb BackupFull
The above line does the following:
1) launches a command procesor
2) passes that command processor the following command line parms:
/C
(process the following command, then terminate)
%ORACLE_HOME_PRIME%\bin\sqlplus.exe
the launched processor will process the executable 'sqlplus.exe' found in the \bin subdirectory, found in the directory indicated by the environment variable ' ORACLE_HOME_PRIME'. The remainder of the command line will be passed to sqlplus.exe for interpretation and processing
/NOLOG
tell sqlplus to start up without trying to immediately log on to a database
typically used to indicate to sqlplus that the immediately following string names a file of sql and sqlplus commands to be processed.
%xxxx_HOME%\DBA_Backup\BackupDo.sql
tell sqlplus to execute the commands found in the file 'BackupDo.sql', found in the subdirectory DBA_Backup, found in the directory name by the environment variable 'xxxx_HOME'.
testdb
BackupFull
pass the values 'testdb' and 'BackupFull' to be used as values for substitution variables &1 and &2 in the file 'BackupDo.sql'
Script:
rmanbackup.rman
BACKUP AS COMPRESSED BACKUPSET DATABASE FORCE PLUS ARCHIVELOG;
DELETE NOPROMPT ARCHIVELOG ALL BACKED UP 2 TIMES TO DEVICE TYPE DISK;
LIST BACKUP SUMMARY;
LIST BACKUP;
EXIT;I don't know what you expect of this. It is an rman script and we've seen no sign of an rman script being executed in any of what you've shown us. RMAN commands are processed by rman, not sqlplus.
Unfortunately, you didn't think showing us the contents of BackupDo.sql was of any value in finding out what your problem was.
Edited by: EdStevens on Jul 11, 2011 7:58 PM

ORA-00902: invalid datatype comile error while using CAST function

Hi everyone,
I'm getting ORA-00902: invalid datatype compilation error while using CAST function.
open ref_cursor_list for select empName from TABLE(CAST(part_t AS partnumberlist));
The partnumberlist and ref_cursor_list is declared in the Package spec as given below.
TYPE ref_cursor_list IS REF CURSOR;
TYPE partnumberlist IS TABLE OF emp.empName%TYPE;
The error points the partnumberlist as invalid datatype in TOAD because of this i'm unable to compile the package.
Any suggestion
Thanks and regards
Sathish Gopal

Here is my code for
package Spec
CREATE OR REPLACE PACKAGE "HISTORICAL_COMMENTZ" AS
TYPE prior_part_data_record IS RECORD (
prior_part_row_id PGM_RPLCMNT_PART.PR_PART_ROW_S_ID%TYPE,
prior_pgm_chng_s_id PGM_RPLCMNT_PART.PR_PGM_CHNG_S_ID%TYPE
TYPE parts_list IS TABLE OF prior_part_data_record;
--TYPE parts_list IS TABLE OF NUMBER;
TYPE partnumberlist IS TABLE OF PGM_RPLCMNT_PART.PR_PART_ROW_S_ID%TYPE;
TYPE partnumber_cursor IS REF CURSOR;
TYPE comment_record IS RECORD (
pgm_s_id                     PGM_PART_CMNT.PGM_S_ID%TYPE,
part_row_s_id                PGM_PART_CMNT.PART_ROW_S_ID%TYPE,
pgm_chng_s_id                PGM_PART_CMNT.PGM_CHNG_S_ID%TYPE,
cmnt_txt                     PGM_PART_CMNT.CMNT_TXT%TYPE,
cmnt_dt                     PGM_PART_CMNT.CMNT_DT%TYPE,
updt_rsrc_id                PGM_PART_CMNT.UPDT_RSRC_ID%TYPE
TYPE comment_list IS TABLE OF comment_record;
global_pgm_s_id INTEGER := 0;
global_part_row_s_id INTEGER := 0;
err_num NUMBER := 999999;
err_msg VARCHAR2 (250);
PROCEDURE getComments (
pgm_s_id IN NUMBER,
part_row_s_id IN NUMBER,
partnumber_cursorlist out partnumber_cursor);
END;
Package Body
CREATE OR REPLACE PACKAGE BODY HISTORICAL_COMMENTZ
AS
FUNCTION getPriorPart
(param_prior_pgm_chng_s_id IN PGM_RPLCMNT_PART.PR_PGM_CHNG_S_ID%TYPE,
return_prior_part_data_record IN OUT prior_part_data_record
RETURN INTEGER
IS
retVal INTEGER;
prior_part_row_id INTEGER;
prior_pgm_chng_s_id INTEGER;
local_prior_part_data_record prior_part_data_record;
BEGIN
SELECT PR_PART_ROW_S_ID AS prior_part_row_id, PR_PGM_CHNG_S_ID AS prior_pgm_chng_s_id
INTO local_prior_part_data_record
--SELECT PR_PART_ROW_S_ID INTO retVal
FROM PGM_RPLCMNT_PART
WHERE PGM_S_ID = global_pgm_s_id AND CUR_PGM_CHNG_S_ID = param_prior_pgm_chng_s_id;
return_prior_part_data_record := local_prior_part_data_record;
retVal := 0;
RETURN retVal;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
err_num := SQLCODE;
err_msg := 'SQL Error ' || SUBSTR (SQLERRM, 1, 250);
DBMS_OUTPUT.put_line ('SQLERROR = ' || err_msg);
retVal := -1;
RETURN retVal;
WHEN OTHERS
THEN
err_num := SQLCODE;
err_msg := 'SQL Error ' || SUBSTR (SQLERRM, 1, 250);
DBMS_OUTPUT.put_line ('SQLERROR = ' || err_msg);
retVal := -1;
RETURN retVal;
END getPriorPart;
FUNCTION getComment (found_parts_list IN parts_list, comments OUT comment_list)
RETURN INTEGER
IS
CURSOR init_cursor
IS
SELECT PGM_S_ID,PART_ROW_S_ID,PGM_CHNG_S_ID,CMNT_TXT,CMNT_DT,UPDT_RSRC_ID
FROM PGM_PART_CMNT WHERE 1 = 2;
retVal INTEGER;
indexNum PLS_INTEGER;
local_part_record prior_part_data_record;
local_comment_record comment_record;
local_part_row_s_id NUMBER;
i PLS_INTEGER;
BEGIN
OPEN init_cursor;
FETCH init_cursor
BULK COLLECT INTO comments;
i := 0;
indexNum := found_parts_list.FIRST;
WHILE indexNum IS NOT NULL
LOOP
local_part_record := found_parts_list(indexnum);
local_part_row_s_id := local_part_record.prior_part_row_id;
SELECT PGM_S_ID,PART_ROW_S_ID,PGM_CHNG_S_ID,CMNT_TXT,CMNT_DT,UPDT_RSRC_ID
INTO local_comment_record FROM PGM_PART_CMNT
WHERE PGM_S_ID = global_pgm_s_id
AND PART_ROW_S_ID = local_part_row_s_id;
comments(i) := local_comment_record;
i := i + 1;
END LOOP;
RETURN retval;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
err_num := SQLCODE;
err_msg := 'SQL Error ' || SUBSTR (SQLERRM, 1, 250);
DBMS_OUTPUT.put_line ('SQLERROR = ' || err_msg);
RETURN retval;
WHEN OTHERS
THEN
err_num := SQLCODE;
err_msg := 'SQL Error ' || SUBSTR (SQLERRM, 1, 250);
DBMS_OUTPUT.put_line ('SQLERROR = ' || err_msg);
RETURN retval;
END getComment;
PROCEDURE getComments
pgm_s_id IN NUMBER,
part_row_s_id IN NUMBER,
partnumber_cursorlist OUT partnumber_cursor)
IS
comment_recordlist comment_record;
retPartnumberlist partnumberlist;
found_parts_list parts_list;
local_part_record prior_part_data_record;
is_more_parts BOOLEAN;
driver_chng_s_id NUMBER;
num_parts NUMBER;
retVal NUMBER;
comments comment_list;
returnPartnumberlist partnumberlist;
iloopCounter PLS_INTEGER;
inx1 PLS_INTEGER;
part_t partnumberlist :=partnumberlist(100,200,300);
CURSOR part_list_init_cursor
IS
SELECT PR_PART_ROW_S_ID,PR_PGM_CHNG_S_ID FROM PGM_RPLCMNT_PART WHERE 1 = 2;
CURSOR inIt_cursor
IS
SELECT 0 FROM DUAL WHERE 1 = 2;
BEGIN
DBMS_OUTPUT.ENABLE (5000000);
global_pgm_s_id := pgm_s_id;
global_part_row_s_id := part_row_s_id;
SELECT PART_ROW_S_ID AS prior_part_row_id, PR_PGM_CHNG_S_ID AS prior_pgm_chng_s_id
INTO local_part_record
FROM PGM_RPLCMNT_PART
WHERE PGM_S_ID = global_pgm_s_id AND PART_ROW_S_ID = global_part_row_s_id AND
CUR_PGM_CHNG_S_ID IN (SELECT MAX(CUR_PGM_CHNG_S_ID) FROM PGM_RPLCMNT_PART WHERE
PGM_S_ID = global_pgm_s_id AND PART_ROW_S_ID = global_part_row_s_id
GROUP BY PART_ROW_S_ID);
OPEN part_list_init_cursor;
FETCH part_list_init_cursor
BULK COLLECT INTO found_parts_list;
-- Add the existing part to the found list
found_parts_list.EXTEND;
found_parts_list(1) := local_part_record;
driver_chng_s_id := local_part_record.prior_pgm_chng_s_id;
num_parts := 1;
is_more_parts := TRUE;
WHILE (is_more_parts) LOOP
retVal := getPriorPart(driver_chng_s_id,local_part_record);
IF (retVal != -1) THEN
found_parts_list.EXTEND;
num_parts := num_parts + 1;
found_parts_list(num_parts) := local_part_record;
driver_chng_s_id := local_part_record.prior_pgm_chng_s_id;
ELSE
is_more_parts := FALSE;
END IF;
END LOOP;
--num_parts := getComment(found_parts_list,comments);
OPEN init_cursor;
FETCH init_cursor
BULK COLLECT INTO returnPartnumberlist;
num_parts := found_parts_list.COUNT;
FOR iloopCounter IN 1 .. num_parts
LOOP
returnPartnumberlist.EXTEND;
returnPartnumberlist(iloopCounter) := found_parts_list(iloopCounter).prior_part_row_id;
END LOOP;
retPartnumberlist := returnPartnumberlist;
open
*          partnumber_cursorlist for select PR_PART_ROW_S_ID from TABLE(CAST(retPartnumberlist AS historical_commentz.partnumberlist));*
DBMS_OUTPUT.put_line('Done....!');
EXCEPTION
some code..............................
END getComments;
END HISTORICAL_COMMENTZ;
/

Error while using P2V in Oracle VM 2.2 version

Error while using P2V in Oracle VM 2.2 version
I tried using this option by using the steps given on one link but it didnt worked...
Error:
code 404, message No permission to list directory.
I ve tried giving full permissions on for /OVS on Server but invain.
Can U pls help me...
Thanks in advance.
Edited by: user10310678 on Sep 16, 2009 3:32 AM

user10310678 wrote:
I am using beta version. Oracle VM Manager 2.2.0If you have a beta version of 2.2, then you should be an Oracle employee. Please ask this question on an internal mailing list. If you are not an Oracle employee, please ask the employee that gave you this beta. As this is a beta, some functionality may not be operational yet, so I can't answer why this particular feature seems not to work.

Error while using LabVIEW 8.2.1 Dll from Visual C++ 6.0

I am getting an error while using a LabVIEW 8.2.1 dll from Visual C++ 6.0 application. This is what I am doing:
1) Created a dll using LabVIEW 8.2.1 (I used a tutorial from NI knowledge base: "Creating DLLs from 6.0i". It is a temperature conversion VI; input DegreeF and get DegreeC out). Instead of LabVIEW 6.0i, I used 8.2.1. It created the dll Convert_Temp.dll successfully.
2) Then I created a Visual C++ 6.0 application (used a tutorial from NI knowledge base: "Calling a DLL from Microsoft Visual C++ that was Generated by LabVIEW 6i). I could build the project and create an executable application F_To_C.exe.
3) Then copied the LabVIEW dll Convert_Temp.dll into the folder where F_To_C.exe resides. Using windows explorer, went into that folder, and executed the application. I got the following error:
System Error 998 while loading the LabVIEW run-time engine (C:\Program Files\National Instruments\Shared\LabVIEW Run-Time\8.2\lvrt.dll).
Convert_Temp requires a version 8.2.1 (or compatible) LabVIEW Run-Time Engine. Please contact the vendor of Convert_Temp to correct this problem.
I checked the folder: C:\Program Files\National Instruments\Shared\LabVIEW Run-Time\8.2\. It has the file lvrt.dll.
So why am I getting this error?
GKB

sounds like you need to install the LabVIEW 8.2.1 runtime. Not the 8.2 runtime engine.
Paul <--Always Learning!!!
sense and simplicity.
Browse my sample VIs?

Error while using SQL* PLUS due to PUPBLD.SQL script

Similar Messages

Maybe you are looking for