Error while using Tcode MB1C

Hi
I want to add initial stocks to plant zs10 using movement type 561. But I am getting an error stating "Account determination for entry 0009 GBB ____ BSA 3000 not possible". I went into Tcode obyc for chat of account 0009 but I don't know how to proceed with this. Can anyone tell me how to rectify this error.
points will be awarded
thanks in advance
Subhash

Hi,
"Account determination for entry 0009 GBB ____ BSA 3000 not possible". means
You have to maintain the G/L Accounts in these combination.
Here 0009 --> Valuation Grouping Code
        GBB --> Transaction Event Keys
        BSA --> Account Grouping Code (General Modification)
        3000 --> Valuation Class
So first you have maintain the "Valuation grouping code" and assign this VGC to Valuation area with "OMWD" transaction.
I think this u have already done.i.e is 0009 u can check it once in OMED screen against u r valuation area.
Now go to OBYC transaction
Click on the Transaction Eventy Key "GBB"
It's asks for Chart of Accounts. Enter Chart of Accounts
Now maintain the G/L Accounts in the combination of Valuation class 3000, General modification BSA, Valuation grouping code 0009
I hope that problem that you will resolve
Thanks & Regards
Anilkumar Dalai

Similar Messages

Screen number error while using tcode se93....

Hi Abapers,
           I m converting a report program into a t-code using se93.
after giving program name,description, screen number should be given, here the screen number should be given as per the system>status>screen number or v should be write call screen in the program.
i m confused wit it, i had checked the forum also.
REPORT ZWHILE1.
data: length type i value 0,
       strl type i value 0,
       string(30) type c value 'test string'.
strl = strlen(string).
while string NE space.
write string(1).
length = sy-index.
shift string.
endwhile.
write:/ 'strlen:',strl.
write:/ 'length of abcd:', length.
the above s my my program,i want to convert t into a tcode.
Advanced thanks....

hi,
here are the steps to create
Creating transaction code for the table:
1) Go to SE93 and Create a Tcode.
2) Click on the u2018Transaction with parametersu2019 radio button and continue.
3) Enter the Transaction as SM30.
4) Select u2018Skip initial screenu2019.
5) Enter VIEWNAME value as Table name (here Z*) and UPDATE value as X in the u2018Name of screen fieldu2019 and save.
VIEWNAME ZTABLE
UPDATE X
Note : The VIEWNAME,UPDATE and their respective values should be Capital.
If u want to create table maintenance generator then,
1) Choose Delivery and Maintainence tab..
2) Select Delivery class as u2018Cu2019.
3) Select Data browser/Table view Maint as DISPLAY/MAINTAINENCE ALLOWED.
4) Create a Function Group from SE80.
5) Select TABLE MAINTAINENCE GENERATOR from Utilities of menu bar.
6) Fill the Authorization Group as u2018&NC&u2019 and give the created Function Group.
7) Give a screen number not used as Maint Screen no (eg: 9999) and click u2018CREATEu2019(F8).
regards
rahul

Error while creating stock using tcode: MB1C

Error while creating stock using tcode: MB1C
The Error is: Check table T004F:entry G006 does not exist

Hi ,
Please check the FSV (field status variant) for your company code in OBY6 .
then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
if not please maintain it.
Thanks & Regards
Anshu

While creating new stock using Tcode-MB1C

Dear sir,
I am getting an error - posting period 001 2012 is not open.
Thanks in Advance,
Sasi.
Edited by: Csaba Szommer on Jan 11, 2012 6:59 AM

hi, basic question (should check old threads before posting questions).....
check below thread
while creating stock using tcode: mb1c
yogesh

Created a material and want to post by using tcode mb1c, not allowing.?

friends i have a problem here, i created a material for my sales order. i wanted to post like 100 of them in my storage location. so i used tcode mb1c, entered the storage location , plant along with the movment type 561 . it goes in and there i enter the material and and the number to be posted (number of materials) .while saving it it gives the error ."posting period 008 2007 is not open" i had earlier encounterd with error saying some previous dates were closed and i used to closed the previous periods by tcode mmpv and bring it to the present date. but this is the first time when i am seeing that the present period is closed . . i tried with omsy and mmrv also. but i dont know what to do now. how can i open current months posting. i am in sd. dont have much idea about what mm guys do. please help .

Hi Seema,
In general, after creating ES, Cstmr,Matrl we need to execute MMPV before posting material. But in your case the periods are already closed, could be bcz some FICO consultant might have worked on it. But in order to resolve your problem u give a try to following prcdr.
Go to TCode OB52 [Posting Periods] and in the EIGHT column under heading YEAR change it to 2007 for the ROW "+"[Account Type]. Then proceed to MB1C.
In addition to this U may come across No. Range issue for which U uses TCode-FBN1; here for the current Yr. [2007] U have to give the No. Range for the interval appearing in the Error, eg 49,50,51...
Still if the problem persists consult a FICO for some alterations on the same screen [TCode-OB52].
Hope it might help U and reply the same to me
Regards.

Error while using P2V in Oracle VM 2.2 version

Error while using P2V in Oracle VM 2.2 version
I tried using this option by using the steps given on one link but it didnt worked...
Error:
code 404, message No permission to list directory.
I ve tried giving full permissions on for /OVS on Server but invain.
Can U pls help me...
Thanks in advance.
Edited by: user10310678 on Sep 16, 2009 3:32 AM

user10310678 wrote:
I am using beta version. Oracle VM Manager 2.2.0If you have a beta version of 2.2, then you should be an Oracle employee. Please ask this question on an internal mailing list. If you are not an Oracle employee, please ask the employee that gave you this beta. As this is a beta, some functionality may not be operational yet, so I can't answer why this particular feature seems not to work.

OSB: Cannot acquire data source error while using JCA DBAdapter in OSB

Hi All,
I've entered 'Cannot acquire data source' error while using JCA DBAdapter in OSB.
Error infor are as follows:
The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapter1/RetrievePersonService [ RetrievePersonService_ptt::RetrievePersonServiceSelect(RetrievePersonServiceSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'RetrievePersonServiceSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/soademoDatabase].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.soademoDatabase'. Resolved 'jdbc'; remaining name 'soademoDatabase'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
JNDI Name for the Database pool: eis/DB/soademoDatabase
JNDI Name for the Data source: jdbc/soademoDatabase
I created a basic DBAdapter in JDeveloper, got the xsd file, wsdl file, .jca file and the topLink mapping file imported them into OSB project.
Then I used the .jca file to generate a business service, and tested, then the error occurs as described above.
Login info in RetrievePersonService-or-mappings.xml
<login xsi:type="database-login">
<platform-class>org.eclipse.persistence.platform.database.oracle.Oracle9Platform</platform-class>
<user-name></user-name>
<connection-url></connection-url>
</login>
jca file content are as follows:
<adapter-config name="RetrievePersonService" adapter="Database Adapter" wsdlLocation="RetrievePersonService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/soademoDatabase" UIConnectionName="Connection1" adapterRef=""/>
<endpoint-interaction portType="RetrievePersonService_ptt" operation="RetrievePersonServiceSelect">
<interaction-spec className="oracle.tip.adapter.db.DBReadInteractionSpec">
<property name="DescriptorName" value="RetrievePersonService.PersonT"/>
<property name="QueryName" value="RetrievePersonServiceSelect"/>
<property name="MappingsMetaDataURL" value="RetrievePersonService-or-mappings.xml"/>
<property name="ReturnSingleResultSet" value="false"/>
<property name="GetActiveUnitOfWork" value="false"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
RetrievePersonService_db.wsdl are as follows:
<?xml version="1.0" encoding="UTF-8"?>
<WL5G3N0:definitions name="RetrievePersonService-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
<WL5G3N0:import location="RetrievePersonService.wsdl" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService"/>
<WL5G3N0:binding name="RetrievePersonService_ptt-binding" type="WL5G3N1:RetrievePersonService_ptt">
<WL5G3N2:binding style="document" transport="http://www.bea.com/transport/2007/05/jca"/>
<WL5G3N0:operation name="RetrievePersonServiceSelect">
<WL5G3N2:operation soapAction="RetrievePersonServiceSelect"/>
<WL5G3N0:input>
<WL5G3N2:body use="literal"/>
</WL5G3N0:input>
<WL5G3N0:output>
<WL5G3N2:body use="literal"/>
</WL5G3N0:output>
</WL5G3N0:operation>
</WL5G3N0:binding>
<WL5G3N0:service name="RetrievePersonService_ptt-bindingQSService">
<WL5G3N0:port binding="WL5G3N1:RetrievePersonService_ptt-binding" name="RetrievePersonService_ptt-bindingQSPort">
<WL5G3N2:address location="jca://eis/DB/soademoDatabase"/>
</WL5G3N0:port>
</WL5G3N0:service>
</WL5G3N0:definitions>
Any suggestion is appricated .
Thanks in advance!
Edited by: user11262117 on Jan 26, 2011 5:28 PM

Hi Anuj,
Thanks for your reply!
I found that the data source is registered on server soa_server1 as follows:
Binding Name: jdbc.soademoDatabase
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 80328036
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/291])/291
Binding Name: jdbc.SOADataSource
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 92966755
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/285])/285
I don't know how to determine which server the DBAdapter is targetted to.
But I found the following information:
Under Deoloyment->DBAdapter->Monitoring->Outbound Connection Pools
Outbound Connection Pool Server State Current Connections Created Connections
eis/DB/SOADemo AdminServer Running 1 1
eis/DB/SOADemo soa_server1 Running 1 1
eis/DB/soademoDatabase AdminServer Running 1 1
eis/DB/soademoDatabase soa_server1 Running 1 1
The DbAdapter is related to the following files:
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ DBPlan\ Plan. xml
I unzipped DbAdapter.rar, opened weblogic-ra.xml and found that there's only one data source is registered:
<?xml version="1.0"?>
<weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
<enable-global-access-to-classes>true</enable-global-access-to-classes>
<outbound-resource-adapter>
<default-connection-properties>
<pool-params>
<initial-capacity>1</initial-capacity>
<max-capacity>1000</max-capacity>
</pool-params>
<properties>
<property>
<name>usesNativeSequencing</name>
<value>true</value>
</property>
<property>
<name>sequencePreallocationSize</name>
<value>50</value>
</property>
<property>
<name>defaultNChar</name>
<value>false</value>
</property>
<property>
<name>usesBatchWriting</name>
<value>true</value>
</property>
<property>
<name>usesSkipLocking</name>
<value>true</value>
</property>
</properties>
          </default-connection-properties>
<connection-definition-group>
<connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
<connection-instance>
<jndi-name>eis/DB/SOADemo</jndi-name>
          <connection-properties>
               <properties>
               <property>
               <name>xADataSourceName</name>
               <value>jdbc/SOADataSource</value>
               </property>
               <property>
               <name>dataSourceName</name>
               <value></value>
               </property>
               <property>
               <name>platformClassName</name>
               <value>org.eclipse.persistence.platform.database.Oracle10Platform</value>
               </property>
               </properties>
          </connection-properties>
</connection-instance>
</connection-definition-group>
</outbound-resource-adapter>
</weblogic-connector>
Then I decided to use eis/DB/SOADemo for testing.
For JDeveloper project, after I deployed to weblogic server, it works fine.
But for OSB project referencing wsdl, jca and mapping file from JDeveloper project, still got the same error as follows:
BEA-380001: Invoke JCA outbound service failed with application error, exception:
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapterTest/DBReader [ DBReader_ptt::DBReaderSelect(DBReaderSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'DBReaderSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
It almost drive me crazy!!:-(
What's the purpose of 'weblogic-ra.xml' under the folder of 'C:\Oracle\Middleware\home_11gR1\Oracle_OSB1\lib\external\adapters\META-INF'?
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Error while using UTL_FILE

I am getting the following error while using UTL_FILE procedure while using UTL_FILE.FOPEN procedure
from system account. I am using Windows XP with NTFS.
SQL> create or replace directory FILE_DIR as 'C:\'
2 /
Directory created.
SQL> grant read on directory FILE_DIR to public;
Grant succeeded.
1 create or replace PROCEDURE file_upload IS
2 v_file_name VARCHAR2(200);
3 v_file_type UTL_FILE.FILE_TYPE;
4 v_line VARCHAR2(1000);
5 BEGIN
6 v_file_name := 'customers_'||TO_CHAR(SYSDATE,'dd')||TO_CHAR(SYSDATE,'MON')||TO_CHAR(SYSDATE,'YYYY')||'.txt';
7 v_file_type := UTL_FILE.FOPEN('FILE_DIR','V_FILE_NAME','r',1000);
8 UTL_FILE.GET_LINE(v_file_type,V_LINE,1000);
9 UTL_FILE.FCLOSE(v_file_type);
10 DBMS_OUTPUT.PUT_LINE(V_LINE);
11* END;
SQL> exec file_upload;
BEGIN file_upload; END;
ERROR at line 1:
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 475
ORA-29283: invalid file operation
ORA-06512: at "SYSTEM.FILE_UPLOAD", line 7
ORA-06512: at line 1
I appreciate if someone can help me in this regard.
Thanks in Advance.
Regards
Muhammad ALi

Hello,
What exactly are you trying to do? Here I got 2 examples for you , replace with your directory name and pick right option for 'a' (append) or 'w' (write) or 'R' (read).
To read from a directory_ . This will read an existing file 'customer.txt" from the directory
{code}
CREATE OR REPLACE PROCEDURE .file_upload
IS
v_file_name VARCHAR2 (200);
v_file_type UTL_FILE.file_type;
v_line VARCHAR2 (1000);
BEGIN
v_file_name := 'customers.txt';
v_file_type := UTL_FILE.fopen ('EXT_TABLES', v_file_name, 'R');
UTL_FILE.get_line (v_file_type, v_line); -- Error was here
DBMS_OUTPUT.put_line (v_line);
UTL_FILE.fclose (v_file_type);
END;
{code}
_*To open a file*_ This will create customer_XXXXX file under the directory
{code}
CREATE OR REPLACE PROCEDURE testme.file_upload
IS
v_file_name VARCHAR2 (200);
v_file_type UTL_FILE.file_type;
v_line VARCHAR2 (1000);
BEGIN
v_file_name := 'customers_'
|| TO_CHAR (SYSDATE, 'dd')
|| TO_CHAR (SYSDATE, 'MON')
|| TO_CHAR (SYSDATE, 'YYYY')
|| '.txt';
v_file_type := UTL_FILE.fopen ('EXT_TABLES', v_file_name, 'a');
UTL_FILE.put_line (v_file_type, v_line);
DBMS_OUTPUT.put_line (v_line);
UTL_FILE.fclose (v_file_type);
END;
{code}
Regards
Edited by: OrionNet on Jan 29, 2009 12:30 AM

Error while using LabVIEW 8.2.1 Dll from Visual C++ 6.0

I am getting an error while using a LabVIEW 8.2.1 dll from Visual C++ 6.0 application. This is what I am doing:
1) Created a dll using LabVIEW 8.2.1 (I used a tutorial from NI knowledge base: "Creating DLLs from 6.0i". It is a temperature conversion VI; input DegreeF and get DegreeC out). Instead of LabVIEW 6.0i, I used 8.2.1. It created the dll Convert_Temp.dll successfully.
2) Then I created a Visual C++ 6.0 application (used a tutorial from NI knowledge base: "Calling a DLL from Microsoft Visual C++ that was Generated by LabVIEW 6i). I could build the project and create an executable application F_To_C.exe.
3) Then copied the LabVIEW dll Convert_Temp.dll into the folder where F_To_C.exe resides. Using windows explorer, went into that folder, and executed the application. I got the following error:
System Error 998 while loading the LabVIEW run-time engine (C:\Program Files\National Instruments\Shared\LabVIEW Run-Time\8.2\lvrt.dll).
Convert_Temp requires a version 8.2.1 (or compatible) LabVIEW Run-Time Engine. Please contact the vendor of Convert_Temp to correct this problem.
I checked the folder: C:\Program Files\National Instruments\Shared\LabVIEW Run-Time\8.2\. It has the file lvrt.dll.
So why am I getting this error?
GKB

sounds like you need to install the LabVIEW 8.2.1 runtime. Not the 8.2 runtime engine.
Paul <--Always Learning!!!
sense and simplicity.
Browse my sample VIs?

Error while using DB Adapter in BPEL process

Hi All,
I am getting error while using DB Adapter in BPEL process
java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:575) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:381) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:298) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.el.parser.AstValue.invoke(AstValue.java:157) at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283) at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53) at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1259) at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:97) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:91) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:698) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:285) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) Caused by: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:260) at oracle.sysman.emSDK.webservices.wsdlparser.OperationInfoImpl.invokeWithDispatch(OperationInfoImpl.java:985) at oracle.sysman.emas.model.wsmgt.PortName.invokeOperation(PortName.java:729) at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:569) ... 69 more Caused by: javax.xml.ws.soap.SOAPFaultException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:955) at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:750) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:234) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:105) at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:256) ... 72 more
I have created jndi from console which I have mentioned in DBAdapter and I have provided details of JNDI to DbAdapter in deployment.
I am not able to solve this.
Can you please let me know solution for this or provide me link for tutorial of DBAdapter for stored procdure call?

did u deploy your dbadapter through console to the plan mentioned for deployment?

In Oracle 10g Error while using COLLECT

I getting error while using collect in 10g
SQL> ed
Wrote file afiedt.buf
1 SELECT deptno
2 , COLLECT(ename) AS emps
3 FROM emp
4 GROUP BY
5* deptno
SQL> /
, COLLECT(ename) AS emps
ERROR at line 2:
ORA-00932: inconsistent datatypes: expected NUMBER got -
Please give me the solution.

you are using old version of SQL*Plus. if you use later version it will give you correct result.
Edited by: unus on Mar 14, 2010 4:25 AM

Error while using XML Iview, please contact your system administrator.

Hello everybody,
I have already posted a detailed message for the XML iview problem sometime back but havent got any reply so far. All the replies had come from users who are also facing the same problem. I am trying to use a XML iview for fetching RSS feeds from one of the internet source, i have entered the proper URL and selected the proper RSS to XHTMLB transformer also and have entered the proxy settings in the http service and enabled it and restarted it also, but again when i am previewing the Iview its giving me the error <b>"Error while using XML Iview, please contact your system administrator."</b>. I am using
    Area           Version
    J2EE Engine    6.40 PatchLevel 98256.313
    Portal         6.0.14.0.0
, can someone tell me whether its a bug in sp14 or i am missing something while creating this XML Iview. Expecting a proper reply.
Thanks in advance,
Regards,
Sarabjeet.

Hi Sarabjeet,
The XML iView uses server-side fetching, so if you are having problems with a regular URL iView in server-side fetching mode, so the problem with the XML iVIew probably has to do with the proxy settings.
And since you got a 407 error, it seems there is an issue with proxy settings or the proxy server, as mentioned in this description of 407 error:
The HTTP 407 code only applies to users who are accessing the Internet behind a proxy server. This is common in government and corporate workplaces. The 407 code indicates that your computer must first authenticate itself with your company's proxy server. Check with your IT department or computer support group as to the exact reason why you may be getting this error. It may be possible that the proxy server does not allow downloads of specific files (exe, cab, com). You can also verify that your proxy server settings are valid.
I will check if I can find out any more specific info.
Daniel

Error while using exp utility

Hi,
I am getting the following oracle error while using exp,
can someone please suggest on this,
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user SIEBEL
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user SIEBEL
About to export SIEBEL's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
. about to export SIEBEL's tables via Conventional Path ...
. . exporting table EIM_ACCDTL_TNT
EXP-00008: ORACLE error 904 encountered
ORA-00904: "MAXSIZE": invalid identifier
. . exporting table EIM_ACCNTROUTE
EXP-00008: ORACLE error 1003 encountered
ORA-01003: no statement parsed
. . exporting table EIM_ACCNT_CUT
EXP-00008: ORACLE error 904 encountered
ORA-00904: "MAXSIZE": invalid identifier
. . exporting table EIM_ACCNT_DTL
EXP-00008: ORACLE error 1003 encountered
ORA-01003: no statement parsed

Satish is right, there exists bug for 11.1.0.6.
Look at metalink note 741984.1.
Bug number is 5872788 - there exists patch as well.

Error while using '*'in the NTE (EDI 850) Segment where '*' is also used as Data Element

Hi All,
I am facing below mentioned error while using '*'in the NTE (EDI 850) Segment where '*' is also used as Data Element
Error: 1 (Field level error)
SegmentID: NTE
Position in TS: 70
Data Element ID: NTE02
Position in Segment: 2
Data Value:
3: Too many data elements
For Eg: NTE*GEN*My Text *goes here
Here, NTE02 should be My Text *goes here. So, how can I use "*" here without changing anything in the EDI message?
Can it be done?
Thanks.

Sorry, no.
X12 does not support an escape character so whatever is used for delimiters become reserved characters.
If you want to allow '*' in the data, you will have to chooser a different Element delimiter. The receiver should read the from this from the ISA Segment so it's supposed to be dynamic but that's not always the case in practice.

Error while using the export utility

Dear all of
I am getting the following error while using the export utility in the Oracle database 9i
I have run the catexp.sql and catrm.sql suggested by the experts in this forum. But it did not help me. Kindly help me in solving this issue.
FOLLOWING ARE THE ERROR ----------------------------
EXP-00008: ORACLE error 942 encountered
ORA-00942: table or view does not exist
EXP-00024: Export views not installed, please notify your DBA
EXP-00000: Export terminated unsuccessfully
-----------------------------------------------------------------------------------------------------------------------------------

Can you go to this discussion please.
Re: Getting a strange error for Exp
-aijaz

Error while using Tcode MB1C

Similar Messages

Maybe you are looking for