Error while using the same recording

Hi All,
I created a new recording and uploaded some data and it worked fine but when i use the same recording to upload the remaining data at the time of creating batch session in am getting an error " BDC_INSERT QUEUE AT. "
Im fairly new to LSMW can anyone help me how to solve this.

Hi
Please check the data converted for upload and there may be some extra spaces which is causing the problem.
Try to use a new file converted and upload it again.
Shiva

Similar Messages

Error while importing the user Records through SCC7

Hi Basis Gurus,
We are doing the post DB Refresh Activities for a Sandbox .
Refresh is done from D21 to S21.
We are stuckup with an error while importing the user Records(scc7).
The exported user records request from D21 is dumped in the trans directory of S38 and imported in to S21 using TP commands at O/S level. The import is done successfully( RC 4 with warnings).
But now when we run SCC7 (post import activities) in the background the process is getting cancelled right in the begining.
Error Occured in SCC3 log
Table logging disabled in program RSCLXCOP by user SAP*"
R/3 Version is 4.6C OS:AIX5.3
Your suggestions will be highly appreciated.
Regards,
Sitaram

Hey Sitaram,
I looks like you have incorrect parameters of client copy in the S21 system.
You can change the parameters in S21 system,
by executing report RSCLXCOP (via transaction SE38 or SA38) in S21.
Search parameters that related to table logging/sap*
good luck!

Error while using the export utility

Dear all of
I am getting the following error while using the export utility in the Oracle database 9i
I have run the catexp.sql and catrm.sql suggested by the experts in this forum. But it did not help me. Kindly help me in solving this issue.
FOLLOWING ARE THE ERROR ----------------------------
EXP-00008: ORACLE error 942 encountered
ORA-00942: table or view does not exist
EXP-00024: Export views not installed, please notify your DBA
EXP-00000: Export terminated unsuccessfully
-----------------------------------------------------------------------------------------------------------------------------------

Can you go to this discussion please.
Re: Getting a strange error for Exp
-aijaz

ARM approval error after upgrading to SP14: Database error while using the secure store.

Dear GRC experts,
After upgrading GRC 10 to SP14, assigning manual passwords during the approval of a request, the approval process is failing.
Here is the scenario; your advice will be appreciated.
Task: Manually assign passwords to multiple systems contained in the request
Where: On the access request, go to “User System Details” tab
Issue: After approving/submitting the request, the error “Database error while using the secure store” is generated
Logs: Nothing on transactions SLG1 or ST22; however ST11 shows the error attached below:
This is the failed approval of the request:
Other scenarios executed as a workaround, and passed the password assignment this time:
The approval will work if only one password is assigned to any of the given systems. The rest of the systems get an auto-generated
password.
ARM also accepts multiple passwords when the requestor assigns passwords on the “User System Details” prior submitting a
request. The GRC admin can approve once reached for system approval.
AS FYI, “Confirm Password” is only required when creating the request but not on any other stage.
System information:
-Netweaver 7
-GRCFND_A SP14
-GRCPINW SP13
Regards,
Gustavo

SAP just delivered a note to fix this issue. The number is 2022294.

Error while using the validate function in SwitchExec

I have created a Route in SwitchExec for connecting channels COM0 and COM1 for a particular switch in SwitchExec. I get the error: (Hex 0xBFFA0001) Instrument error detected.
The same connection works fine when run directly through the LabWindows/CVI function panel.
Has anyone faced a similar problem?

This error comes from the instrument driver, not switch executive. If this is a driver you developed, I suggest debugging the driver using the simple application that does the same thing as the validation process:
- open niSE session
loop through all routes
- connect route
- disconnect route
end loop
loop through all route groups
- connect route group
- disconnect route group
end loop
- close niSE session
You can write this application in CVI, and use the debug version of your driver which I presume is written in CVI. That way you can step through your driver's SetPath function (which is called from NI Switch Executive) and see why it fails with the 0xbffa0001 error.
You can also reuse existing NI Switch Executive sample programs in C
VI to reproduce the problem you were seeing in the validator.
If the driver is provided by a third party, and you have the source code for it, you can try the same procedure as above, and then either fix the driver yourself or inform the original developers about the problem.
If the driver did not come with a source code, then contact the company that provided the driver with the way to reproduce a problem.
For future reference, when you run into a problem that looks like it is coming from the specific driver (which was the case here) it would help if you also mentioned which driver did you use.
Srdan Zirojevic

Error while using the interface IWDClientUser

Hi All,
Im getting the error while capturing the ESS user by the interface IWDClientUser.
*ERROR Details:-* This Compilation unit indirectly referencesthe missing type com.sap.security.api.IUser (typically some required class file is referring a type outside the class path)
Ihave imported following namespaces also
com.sap.tc.webdynpro.services.sal.um.api.IWDClientUser;
com.sap.tc.webdynpro.services.sal.um.api.WDClientUser;
Regards,
Sumankumar

Hi,
To resolve this
NW04s
In WebDynpro Explorer Window, select your project->DC Metadata->DCDefinition->Right click on Used DCs and selecte add used DCs
select SAP-J2E, choose the com.sap.security.api.sda and finish.
Ce
Right Click Dc->Dc Properties->ENGINEAPI->choose com.sap.security.api.sda
If needed do an Organize Import.
Regards
Ayyapparaj

Error while using the function module..pack_handling_unit_dlvry

Hi all...
while using the function module pack_handling_unit_dlvry,
we need to pass the handling unit number as per the functionality we require.
but the mandatory field for the function module is the handling unit number in the form of bar code..
so how to use this function module..
All the useful answers will be regarded..
Regards,
Saroja.

Have you tried using BAPI BAPI_HU_CREATE. Also view Function Module Documentation on its usage.

Getting the below error while using the JMS server.

<Sep 20, 2010 9:27:43 AM EDT> <Warning> <J2EE> <BEA-160064> <There was an error while making the initial connection to the JMS resource named EMSTopicFactoryNonXA from within an EJB or a servlet. The server will attempt the connection again later. The error was javax.jms.JMSException: [J2EE:160048]JNDI lookup of the JMS connection factory EMSTopicFactoryNonXA failed: javax.naming.AuthenticationException: Not permitted: invalid name or password [Root exception is javax.jms.JMSSecurityException: invalid name or password]>
<Sep 20, 2010 9:27:43 AM EDT> <Warning> <J2EE> <BEA-160082> <There was an error while making the initial connection to the JMS resource named com/lehman/fit/ice/agg2/TopicConnectionFactory from the EJB "Agg2BatchBean" inside application "Agg2". The server will attempt the connection again later. The error was javax.jms.JMSException: [J2EE:160048]JNDI lookup of the JMS connection factory com/lehman/fit/ice/agg2/TopicConnectionFactory failed: javax.naming.AuthenticationException: Not permitted: invalid name or password [Root exception is javax.jms.JMSSecurityException: invalid name or password]>
Note:-weblogic version 9.1sp0
Please suggest me how to resolve the above exception.

<Sep 20, 2010 9:27:43 AM EDT> <Warning> <J2EE> <BEA-160064> <There was an error while making the initial connection to the JMS resource named EMSTopicFactoryNonXA from within an EJB or a servlet. The server will attempt the connection again later. The error was javax.jms.JMSException: [J2EE:160048]JNDI lookup of the JMS connection factory EMSTopicFactoryNonXA failed: javax.naming.AuthenticationException: Not permitted: invalid name or password [Root exception is javax.jms.JMSSecurityException: invalid name or password]>
<Sep 20, 2010 9:27:43 AM EDT> <Warning> <J2EE> <BEA-160082> <There was an error while making the initial connection to the JMS resource named com/lehman/fit/ice/agg2/TopicConnectionFactory from the EJB "Agg2BatchBean" inside application "Agg2". The server will attempt the connection again later. The error was javax.jms.JMSException: [J2EE:160048]JNDI lookup of the JMS connection factory com/lehman/fit/ice/agg2/TopicConnectionFactory failed: javax.naming.AuthenticationException: Not permitted: invalid name or password [Root exception is javax.jms.JMSSecurityException: invalid name or password]>
Note:-weblogic version 9.1sp0
Please suggest me how to resolve the above exception.

Getting error while using the data element in ztable

though i specified the length as 20 in dataelement when i am entering the dataelement i am getting this error
while i used help i got the following information
Number of positions < minimum number (1) for data type CHAR
Message no. DO253
Diagnosis
A minimum length is required for the specified data type.
This minimum length is not reached by the specified number of positions.
Procedure
Increase the number of positions or select a more appropriate data type with the possible entries help F4.

This is strange, you shouldn't even be able to activate the dataelement type char with a length of 0. Revisit your data element and make sure that the length shows to be greater than 0 and reactivate your data element to make sure the newest version is active. In case you are referencing a domain in your data element do the same with the domain after validating that everything is correct (you can also use the check function). Then go back to your table and reenter the data element before activating your table.
Hope that helps,
Michael

Mapping error while downloading the condition records (ECC to CRM)

Hello Experts,
We were downloading the condition records from ECC to CRM system (Production), but due to Mapping error, it was unsuccessful, i wonder what's going wrong there.
When i see in SMQ2 (CRM Inbound Queue), an queue got stucked there, i.e, R3AD_ZDNL_COND_A930 having SYSFAIL status.
While debugging the queue, I have found that the queue got stuck because of u2018Mapping Erroru2019.
I found inside, Standard code reads the record from table /SAPCND/T681 (Condition Table Structure) for KAPPL = 'CRM', KVEWE = 'PR', KOTABNR = 'CUS930' and AS4LOCAL = u2018Au2019 for which the value of VAKEY_OFFSET is maintained as 0.
If system finds the value of VAKEY_OFFSET is Zero(0) then it will change the download type from D (Delta) to M (Mapping Error) and raise the error & block the Inbound Queue in CRM.
I checked in SMW01alsofor getting some more knowledge about that queue, here the error description:
Structure information for table CNCCRMPRCUS930 not available (Message class: CND_MAP)
Error when carrying out delta download (Message class: CND_MAP)
I am a technical guy and dont have much idea in CRM Middleware.
I welcome your valuable thoughts and will award full points.
Regards,
Jeo

Hi,
As you mentioned i checked for the followings:
>>In Maintain field catalog:
I found only 2-3 fields are maintained here, when i compared with A930 (A930 in ECC system).
>>Create condition tables:
I checked it for CUS930, i found the same but condition table structure name like CNCCRMPRCUS930 are missing. Is that important? Because i see in SMW01, same error is coming over there : Structure information for table CNCCRMPRCUS930 not available .
Please suggest me, now what i need to do?
Regards,
Jeo
Edited by: Jeo Denson on Dec 1, 2011 4:11 PM

Error while updating the status record of IDOC in SAP

Hi All,
I am facing this problem. I have done outbound processing and IDOC was sent successfully from SAP to EDI system and it was processed in EDI and now EDI system wants to send the status back to SAP with a status message and the status number that we are using is '24' and we have mapped all the fields in the status table EDIDS and made sure that EDI system sends all those and I think Counter field can not be determined by EDI system so EDI system used the counter '1' since it can not determine how many counters are already there in SAP and unless we pass the value to this counter field we were getting the error. After passing all the values the status of the IDOC is updated with the status '00' instead of '24' and we do not know why it is happened and I would like to know how SAP converts the status record that is received from the EDI system.
Please let me know how the status record will be translated into SAP from EDI system and I ahve followed basically EDIDS structure and the IDOC status is updating in SAP but with wrong status number and the alignemnt also missing in SAP fields like if I give some text in the EDI it is splitting and storing in 2 fields.
Please help me in this and I think I have explained the problem in a detail manner.
Thanks,
Ramesh.

Hi Naresh,
Thanks for the reply and my question is since EDI system is able to send the status back to SAP from EDI system and only problem is it is updatinf the status wrong and I have checked the EDIDS table also and the entry is creating with another counter and please confirm me that it is because of EDI does not support the status record update so that I can confirm to the client that there is nothing wrong in the way SAP functions and EDI system can not update the status code in the SAP.
Thanks,
Ramesh.

Error while using the Geospatial Range FIlter

Hello,
When I try to use the Geospatial Range Filter I get the error:
javax.portlet.PortletException: com.endeca.portal.data.DataSourceException: An error occurred while executing query: exception encountered while executing external function 'internal:navigation-query', caused by error endeca-err:MDEX0001 : Invalid input : Error in selection filter: "DISTANCE" is not a valid function on the types (mdex:geocode-set, mdex:geocode)
Can anybody help me?
Thanks!
Marco

Marco,
you are dealing here with trying to use a function DISTANCE on mdex:geocode type and mdex:geocode-set, where:
mdex:geocode Represents a latitude and longitude pair. Used for atomic values (from single-assign geocode attributes).
mdex:geocode-set Represents a latitude and longitude pair. Used for sets (from multi-assign geocode attributes).
However, many functions and operators work on atomic data types and do not support sets.
Quoting from the EQL Guide:
Important: With three exceptions, all the functions and operators described in this chapter work only on atomic data types. That is, they are not supported with sets. The three exceptions are
ARB,COUNT, and
COUNTDISTINCT. For information on the set functions, see Sets and Multi-assign Data.

Error while using the Bapi BAPI_GOODSMVT_CREATE

Hi all,
I am using the BAPI BAPI_GOODSMVT_CREATE to Upload the Data in MB01 and for creating the MATERIAL DOCUMENT for Multiple Lineitems at a time.
But i am getting the error as * NO ITEMS WERE TRANSFERRED*
I am using two separate intenal tables One for Header records and One for Line item records
and passing the tables in the BAPI.
Please Solve my issue and if possible please send me the sample code along with the flatfile or excel sheet.
Thanks and Regards
ajay

Check the below link for a sample code.
[http://www.sap-img.com/abap/bapi-goodsmvt-create-to-post-goods-movement.htm|http://www.sap-img.com/abap/bapi-goodsmvt-create-to-post-goods-movement.htm]
Hope this helps.
Thanks,
Balaji

Error while using the variable name "VARIABLE" in variable substitution

Hi Experts,
I am using variable substitution to have my output filename set as a payload field value. It is working fine when I am using the variable name as fname, subs etc but channel goes in error when I am using the variable name as "VARIABLE". This is probably a reserved word but i would like to know where i can find a detailed documentation on this. Say things to note / restrictions while using variable substitution.
This is the error in the channel:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error during variable substitution: java.text.ParseException: Variable 'variable' not found in variable substitution table: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: java.text.ParseException: Variable 'variable' not found in variable substitution table
Thanks,
Diya

Hi Zevik,
Thanks for the reply. The output file is created correctly by merely changing the variable name to something else and hence the doubt.
Below is the configuration:
Variable Substituition
VARIABLE payload:interface_dummy,1,Recordset,1,Header,1,field1,1
Filename schema : TEST_%VARIABLE%.txt
Output xml structure:
<?xml version="1.0" encoding="utf-8" ?>
- <ns:interface_dummy xmlns:ns="http://training.eu.unilever.com">
- <ns:Recordset xmlns:ns="http://training.eu.unilever.com">
- <Header>
<identifier>HDR</identifier>
<field1>001</field1>
<field2>001</field2>
<field3>R</field3>
</Header>
- <Detail>
<identifier>A</identifier>
<field1>000000002</field1>
<field2 />
<field3>Doretha.Walker</field3>
</Detail>
I thimk my configuration is correct as it is working correctly with the variable name change, However, maybe i missed something !

Syntax error while using the parameter inside the badi method.

Hello all ,
I'm writing a code in the badi implementation . The badi is /SAPSLL/CTRL_MM0C_R3 . this badi contains a metthod API_CONTROL_MODIFY.This badi triggers while using MIGO transaction .
It is having the following parameter .
IT_MSEG     Importing     Type     SLLR3_MSEG_T .
SLLR3_MSEG_T is declared as follows.
TYPES: sllr3_mkpf_t LIKE mkpf OCCURS 0,
            sllr3_mseg_t LIKE mseg OCCURS 0.
here i have to get the werks value that is populated into IT_MSEG whie doing MIGO .
I have declared a local variable and assigned werks value from the IT_MSEG to the local variable as follows
DATA:l_werks type werks.
l_werks = IT_MSEG-WERKS.
But I'm getting the following error.
"IT_MSEG" is a table without a header line and therefore has no
component called "WERKS".
How should i avoid this error. Please give me sample code on how to avoid this error.
thanks in advance
pavan

Hi,
Move the row from IT_MSEG into a work area and use it. Declare the workarea of required type.
DATA:l_werks type werks.
read table it_mseg into wa_mseg index 1.
l_werks = wa_MSEG-WERKS.
Regards
Vinod

Error while using the same recording

Similar Messages

Maybe you are looking for