Error while using webutil in 10g forms

Hi All,
I followed all the steps as given in the webutil user guide, in order to use webutil functionality in my forms 10g. Even then, I am getting an error message while trying to open a file from the client machine.
oracle.forms.webutil.file.FileFunctions bean not found WEBUTIL_FILE.FILE_SELECTION_DIALOG_INT will not work.
I need a solution to this problem urgently.
Thanks,
M.Banerjee

Hi,
look at the Jinitiator console if the webutil jar file gets downloaded. If this is downloaded, which indicates that it can be found on the server, check the implementation in Forms. What this says is that the bean cannot be found, which however should be the case if webutil is configured correctly.
Frank

Similar Messages

  • PLSQL Error while using collections dATABASE:10G

    Hi,
    I am getting below error while compiling below code:
    Error: DML statement without BULK In-BIND cannot be used inside FORALL
    Could you suggest.
    create or replace PROCEDURE V_ACCT_MTH ( P_COMMIT_INTERVAL  NUMBER DEFAULT 10000)
    is
    CURSOR CUR_D_CR_ACCT_MTH
    IS
    SELECT * FROM D_ACCT_MTH;
    TYPE l_rec_type IS TABLE OF CUR_D_CR_ACCT_MTH%ROWTYPE
    INDEX BY PLS_INTEGER;
    v_var_tab    l_rec_type;
    v_empty_tab  l_rec_type;
    v_error_msg  VARCHAR2(80);
    v_err_code   VARCHAR2(30);
    V_ROW_CNT NUMBER :=0;
    --R_DATA    NUMBER :=1;
    BEGIN
    OPEN CUR_D_CR_ACCT_MTH;
    v_var_tab := v_empty_tab;
    LOOP
        FETCH CUR_D_CR_ACCT_MTH BULK COLLECT INTO v_var_tab LIMIT P_COMMIT_INTERVAL;
        EXIT WHEN v_var_tab.COUNT=0;
            FORALL R_DATA IN 1..v_var_tab.COUNT
               INSERT INTO ACCT_F_ACCT_MTH
                DATE_KEY
               ,ACCT_KEY
               ,P_ID
               ,ORG_KEY
               ,FDIC_KEY
               ,BAL
               ,BAL1
               ,BAL2
               ,BAL3
               ,BAL4
               ,BAL5
               ,BAL6
               ,BAL7
               ,BAL8
               ,BAL9
               ,BAL10
               ,BAL11
               ,BAL12
               ,BAL13
               ,BAL14
               ,BAL15
               VALUES
               DATE_KEY(R_DATA)
              ,ACCT_KEY(R_DATA)
              ,P_ID(R_DATA)
              ,ORG_KEY(R_DATA)
              ,FDIC_KEY(R_DATA)
              ,BAL(R_DATA)
              ,BAL(R_DATA)
              ,BAL(R_DATA)
              ,BAL(R_DATA)
              ,BAL(R_DATA)
              ,BAL(R_DATA)
              ,BAL(R_DATA)
              ,BAL(R_DATA)
              ,BAL(R_DATA)
              ,BAL(R_DATA)
              ,BAL(R_DATA)
              ,BAL(R_DATA)
              ,BAL(R_DATA)
              ,BAL(R_DATA)
              ,BAL(R_DATA)
              ,BAL(R_DATA)
            COMMIT;
    END LOOP;
    CLOSE CUR_D_CR_ACCT_MTH; 
    EXCEPTION
    WHEN OTHERS THEN
    v_error_msg:=substr(sqlerrm,1,50);
    v_err_code :=sqlcode;
    DBMS_OUTPUT.PUT_LINE(v_error_msg,v_err_code);
    END V_ACCT_MTH;

    931832 wrote:
    Here i am using above method using forall because of large volume of data.Which is a FLAWED approach. Always.
    FORALL is not suited to "move/copy" large amounts of data from one table to another.
    Any suggestion ?Use only SQL. It is faster. It has less overheads. It can execute in parallel.
    So execute it in parallel to move/copy that data. You can roll this manually via the DBMS_PARALLEL_EXECUTE interface. Simplistic example:
    declare
            taskName        varchar2(30) default 'PQ-task-1';
            parallelSql     varchar2(1000);
    begin
            --// create trask
            DBMS_PARALLEL_EXECUTE.create_task( taskName );
            --// chunk the table by rowid ranges
            DBMS_PARALLEL_EXECUTE.create_chunks_by_rowid(
                    task_name => taskName,
                    table_owner => user,
                    table_name => 'D_ACCT_MNTH',
                    by_row => true,
                    chunk_size => 100000
            --// create insert..select statement to copy a chunk of rows
            parallelSql := 'insert into acct_f_acct_mth select * from d_acct_mnth
                            where rowid between :start_id and :end_id';
            --// run the task using 5 parallel processes
            DBMS_PARALLEL_EXECUTE.Run_Task(
                    task_name => taskName,
                    sql_stmt => parallelSql,
                    language_flag => DBMS_SQL.NATIVE,
                    parallel_level => 5
            --// wait for it to complete
            while DBMS_PARALLEL_EXECUTE.task_status( taskName ) != DBMS_PARALLEL_EXECUTE.Finished loop
                    DBMS_LOCK.Sleep(10);
            end loop;
            --// remove task
            DBMS_PARALLEL_EXECUTE.drop_task( taskName );
    end;
    /Details in Oracle® Database PL/SQL Packages and Types Reference guide.
    For 10g, the EXACT SAME approach can be used - by determining the rowid chunks/ranges via a SQL and then manually running parallel processes as DBMS_JOB. See {message:id=1108593} for details.

  • Error while running Developer Suite 10g forms

    I have installed Oracle database 11g and Oracle Developer Suite10g in Windows XP Prof. pc. while I am running the form I'm getting the following Error.
    The Java Runtime Environment cannot be loaded from <\bin\client\jvm.dll>.
    Please give any solution for this problem.
    Thanx.

    I have exactly the same environment ... as the one you have described and all work fine...
    Which product have you installed first....????
    Greetings....
    Sim

  • Getting Error while running Developer Suite 10g forms.

    After designing the form when I'm trying to run the form I'm getting the error message The Java Runtime Environment Cannot be loaded from <\bin\client\jvm.dll>. I have installed oracle database 11g and developer suite 10g in Windows XP Prof. Pc. Please guite some one. Trying from last 2 days but nothing is happening.

    You may not have admin rights to install Jinitiator on your box.
    Cheers

  • In Oracle 10g Error while using COLLECT

    I getting error while using collect in 10g
    SQL> ed
    Wrote file afiedt.buf
    1 SELECT deptno
    2 , COLLECT(ename) AS emps
    3 FROM emp
    4 GROUP BY
    5* deptno
    SQL> /
    , COLLECT(ename) AS emps
    ERROR at line 2:
    ORA-00932: inconsistent datatypes: expected NUMBER got -
    Please give me the solution.

    you are using old version of SQL*Plus. if you use later version it will give you correct result.
    Edited by: unus on Mar 14, 2010 4:25 AM

  • Error while using wbutil Client_OLE2.create_obj('Excel...ora-06508

    I am facing ora-06508 error while using webutil. Have done all setup as per "How to Configure Webutil in Forms 11g ".
    Error on following statement "Client_OLE2.create_obj('Excel.Application')"
    FRM-40375, ORA-06508.
    Waiting for Help.
    Thanks;
    Edited by: umairm on Apr 20, 2012 10:16 AM

    Hi
    It is mentioned in webutil doc that, you must regenerate webutil.pll before using it; otherwise you’ll encounter error ORA-06508 when running a form with the attached library.
    Hope this helps...
    Regards,
    Amatu Allah

  • Error while using RSDRI_INFOPROV_READ : parallel processing error

    Hi
    I am also facing parallel processing error while using the function module RSDRI_INFOPROV_READ in transformation.
    when only one data package is there, the load happens without any issue.  But when multiple data packages are involved the load fails with an error "Exception in parallel processing".

    Hi Lijo,
    I got the following information from the function module documentation of the FM RSDRI_INFOPROV_READ.
    If neither I_SAVE_IN_FILE nor I_SAVE_IN_TABLE are set, then the return takes place in the form of packages (that is an internal table), of value I_PACKAGESIZE. A negative value means that the return should be in one package.
    Prathish.

  • Error while using  CALL METHOD

    I am getting a error while using CALL METHOD cl_ssf_xsf_utilities=>get_bds_graphic_as_bmp
    The error is class "CL_SSF_XSF_UTILITIES is unknown. How to correct that?? please help I am new to object oriented programming??
    Edited by: priya singh on Nov 18, 2008 2:14 PM

    This is my code.
    REPORT ZSAVE_FUNCTION .
    D A T A D E C L A R A T I O N S *
    DATA: v_bitmap TYPE xstring, "graphic data
    v_file TYPE string, "file name
    v_length TYPE i. "length of binary file
    DATA: BEGIN OF it_bitmaps OCCURS 0,
    object TYPE tdobjectgr, "object
    name TYPE tdobname, "name
    id TYPE tdidgr, "id
    tdbtype TYPE tdbtype, "graphic type
    END OF it_bitmaps.
    DATA: itab TYPE TABLE OF x.
    *class cl_ssf_xsf_utilities definition.
        public section.
      methods : get_bds_graphic_as_bmp
    DATA: L_GRAPHIC_XSTR TYPE XSTRING.
    *method cl_ssf_xsf_utilities
    S E L E C T I O N - S C R E E N *
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
    PARAMETERS: p_object TYPE tdobjectgr, "object
    p_btype TYPE tdbtype, "graphic type
    p_name TYPE tdobname, "name
    p_id TYPE tdidgr. "id
    SELECTION-SCREEN END OF BLOCK b1.
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
    PARAMETERS: p_file TYPE rlgrap-filename. "file name
    SELECTION-SCREEN END OF BLOCK b2.
    *A T S E L E C T I O N - S C R E E N O N V A L U E - R E Q U E S T *
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_name.
    *-- Creating f4 help for the parameters
    PERFORM get_f4_object_name.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
    *-- Getting the current value entered
    PERFORM get_current_value.
    *-- Value Request Functionality For Input File Name
    PERFORM f4_value_request.
    S T A R T O F - S E L E C T I O N *
    START-OF-SELECTION.
    *--Getting the graphic as a BMP file
    PERFORM get_graphic_bmp.
    *--Convert the Xstring format to binary format
    PERFORM convert_to_binary.
    *--Download the graphic
    PERFORM download_graphic.
    *& Form get_current_value
    Get the current file path entered
    FORM get_current_value .
    DATA: BEGIN OF li_dynp_value_tab OCCURS 0.
    INCLUDE STRUCTURE dynpread.
    DATA: END OF li_dynp_value_tab.
    DATA: l_program_name LIKE d020s-prog,
    l_dynpro_number LIKE d020s-dnum.
    l_program_name = sy-cprog.
    l_dynpro_number = sy-dynnr.
    REFRESH li_dynp_value_tab.
    li_dynp_value_tab-fieldname = 'P_FILE'.
    APPEND li_dynp_value_tab.
    CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
    dyname = l_program_name
    dynumb = l_dynpro_number
    TABLES
    dynpfields = li_dynp_value_tab
    EXCEPTIONS
    invalid_abapworkarea = 04
    invalid_dynprofield = 08
    invalid_dynproname = 12
    invalid_dynpronummer = 16
    invalid_request = 20
    no_fielddescription = 24
    undefind_error = 28.
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    READ TABLE li_dynp_value_tab INDEX 1.
    p_file = li_dynp_value_tab-fieldvalue.
    ENDFORM. " get_current_value
    *& Form f4_value_request
    Provinding the f4 for the given path
    FORM f4_value_request .
    *-- if the file is to be downloaded to presentation server
    CALL FUNCTION '/SAPDMC/LSM_F4_FRONTEND_FILE'
    EXPORTING
    pathname = p_file
    CHANGING
    pathfile = p_file
    EXCEPTIONS
    canceled_by_user = 1
    system_error = 2
    OTHERS = 3.
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    ENDFORM. " f4_value_request
    *& Form GET_GRAPHIC_BMP
    Get the graphic as a BMP file
    FORM get_graphic_bmp.
    CALL METHOD cl_ssf_xsf_utilities=>get_bds_graphic_as_bmp
    EXPORTING
    p_object = p_object
    p_name = p_name
    p_id = p_id
    p_btype = p_btype
    RECEIVING
    p_bmp = L_GRAPHIC_XSTR
    EXCEPTIONS
    not_found = 1
    internal_error = 2
    OTHERS = 3.
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    ENDFORM. " GET_GRAPHIC_BMP
    *& Form CONVERT_TO_BINARY
    Converting the xstring to binary format
    FORM convert_to_binary .
    CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
    EXPORTING
    buffer = v_bitmap
    IMPORTING
    output_length = v_length
    TABLES
    binary_tab = itab.
    ENDFORM. " CONVERT_TO_BINARY
    *& Form DOWNLOAD_GRAPHIC
    Download the graphic
    FORM download_graphic .
    v_file = p_file.
    CONCATENATE p_file '.BMP' INTO v_file.
    CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
    bin_filesize = v_length
    filename = v_file
    filetype = 'BIN'
    TABLES
    data_tab = itab
    EXCEPTIONS
    file_write_error = 1
    no_batch = 2
    gui_refuse_filetransfer = 3
    invalid_type = 4
    no_authority = 5
    unknown_error = 6
    header_not_allowed = 7
    separator_not_allowed = 8
    filesize_not_allowed = 9
    header_too_long = 10
    dp_error_create = 11
    dp_error_send = 12
    dp_error_write = 13
    unknown_dp_error = 14
    access_denied = 15
    dp_out_of_memory = 16
    disk_full = 17
    dp_timeout = 18
    file_not_found = 19
    dataprovider_exception = 20
    control_flush_error = 21
    OTHERS = 22.
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    ENDFORM. " DOWNLOAD_GRAPHIC
    *& Form GET_F4_OBJECT_NAME
    Get F4 values for object names
    FORM get_f4_object_name .
    DATA: dynpfld_mapping TYPE STANDARD TABLE OF dselc WITH HEADER LINE,
    return_tab TYPE STANDARD TABLE OF ddshretval WITH HEADER LINE.
    *--Selecting the values to be provided as f4 help
    SELECT tdobject
    tdname
    tdid
    tdbtype
    FROM stxbitmaps
    INTO TABLE it_bitmaps.
    *--To update the values in the remaining fields
    dynpfld_mapping-fldname = 'F0001'.
    dynpfld_mapping-dyfldname = 'P_OBJECT'.
    APPEND dynpfld_mapping.
    dynpfld_mapping-fldname = 'F0002'.
    dynpfld_mapping-dyfldname = 'P_NAME'.
    APPEND dynpfld_mapping.
    dynpfld_mapping-fldname = 'F0003'.
    dynpfld_mapping-dyfldname = 'P_ID'.
    APPEND dynpfld_mapping.
    dynpfld_mapping-fldname = 'F0004'.
    dynpfld_mapping-dyfldname = 'P_BTYPE'.
    APPEND dynpfld_mapping.
    *--Providing f4 help with the selected values
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    retfield = 'TDOBNAME'
    dynpprog = sy-repid
    dynpnr = sy-dynnr
    dynprofield = 'P_NAME'
    value_org = 'S'
    TABLES
    value_tab = it_bitmaps
    dynpfld_mapping = dynpfld_mapping
    EXCEPTIONS
    parameter_error = 1
    no_values_found = 2
    OTHERS = 3.
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    ENDFORM. " GET_F4_OBJECT_NAME

  • Error while using P2V in Oracle VM 2.2 version

    Error while using P2V in Oracle VM 2.2 version
    I tried using this option by using the steps given on one link but it didnt worked...
    Error:
    code 404, message No permission to list directory.
    I ve tried giving full permissions on for /OVS on Server but invain.
    Can U pls help me...
    Thanks in advance.
    Edited by: user10310678 on Sep 16, 2009 3:32 AM

    user10310678 wrote:
    I am using beta version. Oracle VM Manager 2.2.0If you have a beta version of 2.2, then you should be an Oracle employee. Please ask this question on an internal mailing list. If you are not an Oracle employee, please ask the employee that gave you this beta. As this is a beta, some functionality may not be operational yet, so I can't answer why this particular feature seems not to work.

  • Error while opening the receipt entry form in AR module.

    Error while opening the receipt entry form in AR module. We have created one new responsibility of Receivables for new operating unit . When we open the corresponding
    forms , we are getting the error message as :
    NO_DATA_FOUND
    FRM-40735: PRE-FORM trigger raised unhandled exception ORA-20002.
    Kindly help in resolving.
    We have ERP version of 11.5.10.2

    Please also see the following docs.
    Transactions Workbench Error: Listing of ORA Errors [ID 1336495.1]
    FRM-40735 ERROR OPENING LIFE EVENT REASONS FORM BENLEVRS [ID 1517593.1]
    APP-AR-96996: The Defined Sales Representatives Have Incorrect Id'S [ID 437107.1]
    ARXSUDRC Receipt Classes Errors With APP-AR-96994: Please Define Sales Representatives [ID 357454.1]
    Thanks,
    Hussein

  • OSB: Cannot acquire data source error while using JCA DBAdapter in OSB

    Hi All,
    I've entered 'Cannot acquire data source' error while using JCA DBAdapter in OSB.
    Error infor are as follows:
    The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapter1/RetrievePersonService [ RetrievePersonService_ptt::RetrievePersonServiceSelect(RetrievePersonServiceSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'RetrievePersonServiceSelect' failed due to: Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
    Exception Description: Cannot acquire data source [jdbc/soademoDatabase].
    Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.soademoDatabase'. Resolved 'jdbc'; remaining name 'soademoDatabase'.
    ; nested exception is:
    BINDING.JCA-11622
    Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    JNDI Name for the Database pool: eis/DB/soademoDatabase
    JNDI Name for the Data source: jdbc/soademoDatabase
    I created a basic DBAdapter in JDeveloper, got the xsd file, wsdl file, .jca file and the topLink mapping file imported them into OSB project.
    Then I used the .jca file to generate a business service, and tested, then the error occurs as described above.
    Login info in RetrievePersonService-or-mappings.xml
    <login xsi:type="database-login">
    <platform-class>org.eclipse.persistence.platform.database.oracle.Oracle9Platform</platform-class>
    <user-name></user-name>
    <connection-url></connection-url>
    </login>
    jca file content are as follows:
    <adapter-config name="RetrievePersonService" adapter="Database Adapter" wsdlLocation="RetrievePersonService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
    <connection-factory location="eis/DB/soademoDatabase" UIConnectionName="Connection1" adapterRef=""/>
    <endpoint-interaction portType="RetrievePersonService_ptt" operation="RetrievePersonServiceSelect">
    <interaction-spec className="oracle.tip.adapter.db.DBReadInteractionSpec">
    <property name="DescriptorName" value="RetrievePersonService.PersonT"/>
    <property name="QueryName" value="RetrievePersonServiceSelect"/>
    <property name="MappingsMetaDataURL" value="RetrievePersonService-or-mappings.xml"/>
    <property name="ReturnSingleResultSet" value="false"/>
    <property name="GetActiveUnitOfWork" value="false"/>
    </interaction-spec>
    </endpoint-interaction>
    </adapter-config>
    RetrievePersonService_db.wsdl are as follows:
    <?xml version="1.0" encoding="UTF-8"?>
    <WL5G3N0:definitions name="RetrievePersonService-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
    <WL5G3N0:import location="RetrievePersonService.wsdl" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService"/>
    <WL5G3N0:binding name="RetrievePersonService_ptt-binding" type="WL5G3N1:RetrievePersonService_ptt">
    <WL5G3N2:binding style="document" transport="http://www.bea.com/transport/2007/05/jca"/>
    <WL5G3N0:operation name="RetrievePersonServiceSelect">
    <WL5G3N2:operation soapAction="RetrievePersonServiceSelect"/>
    <WL5G3N0:input>
    <WL5G3N2:body use="literal"/>
    </WL5G3N0:input>
    <WL5G3N0:output>
    <WL5G3N2:body use="literal"/>
    </WL5G3N0:output>
    </WL5G3N0:operation>
    </WL5G3N0:binding>
    <WL5G3N0:service name="RetrievePersonService_ptt-bindingQSService">
    <WL5G3N0:port binding="WL5G3N1:RetrievePersonService_ptt-binding" name="RetrievePersonService_ptt-bindingQSPort">
    <WL5G3N2:address location="jca://eis/DB/soademoDatabase"/>
    </WL5G3N0:port>
    </WL5G3N0:service>
    </WL5G3N0:definitions>
    Any suggestion is appricated .
    Thanks in advance!
    Edited by: user11262117 on Jan 26, 2011 5:28 PM

    Hi Anuj,
    Thanks for your reply!
    I found that the data source is registered on server soa_server1 as follows:
    Binding Name: jdbc.soademoDatabase
    Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
    Hash Code: 80328036
    toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/291])/291
    Binding Name: jdbc.SOADataSource
    Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
    Hash Code: 92966755
    toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/285])/285
    I don't know how to determine which server the DBAdapter is targetted to.
    But I found the following information:
    Under Deoloyment->DBAdapter->Monitoring->Outbound Connection Pools
    Outbound Connection Pool Server State Current Connections Created Connections
    eis/DB/SOADemo AdminServer Running 1 1
    eis/DB/SOADemo soa_server1 Running 1 1
    eis/DB/soademoDatabase AdminServer Running 1 1
    eis/DB/soademoDatabase soa_server1 Running 1 1
    The DbAdapter is related to the following files:
    C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
    C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ DBPlan\ Plan. xml
    I unzipped DbAdapter.rar, opened weblogic-ra.xml and found that there's only one data source is registered:
    <?xml version="1.0"?>
    <weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
    <enable-global-access-to-classes>true</enable-global-access-to-classes>
    <outbound-resource-adapter>
    <default-connection-properties>
    <pool-params>
    <initial-capacity>1</initial-capacity>
    <max-capacity>1000</max-capacity>
    </pool-params>
    <properties>
    <property>
    <name>usesNativeSequencing</name>
    <value>true</value>
    </property>
    <property>
    <name>sequencePreallocationSize</name>
    <value>50</value>
    </property>
    <property>
    <name>defaultNChar</name>
    <value>false</value>
    </property>
    <property>
    <name>usesBatchWriting</name>
    <value>true</value>
    </property>
    <property>
    <name>usesSkipLocking</name>
    <value>true</value>
    </property>
    </properties>
              </default-connection-properties>
    <connection-definition-group>
    <connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
    <connection-instance>
    <jndi-name>eis/DB/SOADemo</jndi-name>
              <connection-properties>
                   <properties>
                   <property>
                   <name>xADataSourceName</name>
                   <value>jdbc/SOADataSource</value>
                   </property>
                   <property>
                   <name>dataSourceName</name>
                   <value></value>
                   </property>
                   <property>
                   <name>platformClassName</name>
                   <value>org.eclipse.persistence.platform.database.Oracle10Platform</value>
                   </property>
                   </properties>
              </connection-properties>
    </connection-instance>
    </connection-definition-group>
    </outbound-resource-adapter>
    </weblogic-connector>
    Then I decided to use eis/DB/SOADemo for testing.
    For JDeveloper project, after I deployed to weblogic server, it works fine.
    But for OSB project referencing wsdl, jca and mapping file from JDeveloper project, still got the same error as follows:
    BEA-380001: Invoke JCA outbound service failed with application error, exception:
    com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapterTest/DBReader [ DBReader_ptt::DBReaderSelect(DBReaderSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'DBReaderSelect' failed due to: Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
    Exception Description: Cannot acquire data source [jdbc/SOADataSource].
    Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
    ; nested exception is:
    BINDING.JCA-11622
    Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
    Exception Description: Cannot acquire data source [jdbc/SOADataSource].
    Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
    You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
    It almost drive me crazy!!:-(
    What's the purpose of 'weblogic-ra.xml' under the folder of 'C:\Oracle\Middleware\home_11gR1\Oracle_OSB1\lib\external\adapters\META-INF'?
    ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  • Error while using UTL_FILE

    I am getting the following error while using UTL_FILE procedure while using UTL_FILE.FOPEN procedure
    from system account. I am using Windows XP with NTFS.
    SQL> create or replace directory FILE_DIR as 'C:\'
    2 /
    Directory created.
    SQL> grant read on directory FILE_DIR to public;
    Grant succeeded.
    1 create or replace PROCEDURE file_upload IS
    2 v_file_name VARCHAR2(200);
    3 v_file_type UTL_FILE.FILE_TYPE;
    4 v_line VARCHAR2(1000);
    5 BEGIN
    6 v_file_name := 'customers_'||TO_CHAR(SYSDATE,'dd')||TO_CHAR(SYSDATE,'MON')||TO_CHAR(SYSDATE,'YYYY')||'.txt';
    7 v_file_type := UTL_FILE.FOPEN('FILE_DIR','V_FILE_NAME','r',1000);
    8 UTL_FILE.GET_LINE(v_file_type,V_LINE,1000);
    9 UTL_FILE.FCLOSE(v_file_type);
    10 DBMS_OUTPUT.PUT_LINE(V_LINE);
    11* END;
    SQL> exec file_upload;
    BEGIN file_upload; END;
    ERROR at line 1:
    ORA-29283: invalid file operation
    ORA-06512: at "SYS.UTL_FILE", line 475
    ORA-29283: invalid file operation
    ORA-06512: at "SYSTEM.FILE_UPLOAD", line 7
    ORA-06512: at line 1
    I appreciate if someone can help me in this regard.
    Thanks in Advance.
    Regards
    Muhammad ALi

    Hello,
    What exactly are you trying to do? Here I got 2 examples for you , replace with your directory name and pick right option for 'a' (append) or 'w' (write) or 'R' (read).
    To read from a directory_ . This will read an existing file 'customer.txt" from the directory
    {code}
    CREATE OR REPLACE PROCEDURE .file_upload
    IS
    v_file_name VARCHAR2 (200);
    v_file_type UTL_FILE.file_type;
    v_line VARCHAR2 (1000);
    BEGIN
    v_file_name := 'customers.txt';
    v_file_type := UTL_FILE.fopen ('EXT_TABLES', v_file_name, 'R');
    UTL_FILE.get_line (v_file_type, v_line); -- Error was here
    DBMS_OUTPUT.put_line (v_line);
    UTL_FILE.fclose (v_file_type);
    END;
    {code}
    _*To open a file*_ This will create customer_XXXXX file under the directory
    {code}
    CREATE OR REPLACE PROCEDURE testme.file_upload
    IS
    v_file_name VARCHAR2 (200);
    v_file_type UTL_FILE.file_type;
    v_line VARCHAR2 (1000);
    BEGIN
    v_file_name := 'customers_'
    || TO_CHAR (SYSDATE, 'dd')
    || TO_CHAR (SYSDATE, 'MON')
    || TO_CHAR (SYSDATE, 'YYYY')
    || '.txt';
    v_file_type := UTL_FILE.fopen ('EXT_TABLES', v_file_name, 'a');
    UTL_FILE.put_line (v_file_type, v_line);
    DBMS_OUTPUT.put_line (v_line);
    UTL_FILE.fclose (v_file_type);
    END;
    {code}
    Regards
    Edited by: OrionNet on Jan 29, 2009 12:30 AM

  • Error while using LabVIEW 8.2.1 Dll from Visual C++ 6.0

    I am getting an error while using a LabVIEW 8.2.1 dll from Visual C++ 6.0 application. This is what I am doing:
    1) Created a dll using LabVIEW 8.2.1 (I used a tutorial from NI knowledge base: "Creating DLLs from 6.0i". It is a temperature conversion VI; input DegreeF and get DegreeC out). Instead of LabVIEW 6.0i, I used 8.2.1. It created the dll Convert_Temp.dll successfully.
    2) Then I created a Visual C++ 6.0 application (used a tutorial from NI knowledge base: "Calling a DLL from Microsoft Visual C++ that was Generated by LabVIEW 6i). I could build the project and create an executable application F_To_C.exe.
    3) Then copied the LabVIEW dll Convert_Temp.dll into the folder where F_To_C.exe resides. Using windows explorer, went into that folder, and executed the application.  I got the following error:
    System Error 998 while loading the LabVIEW run-time engine (C:\Program Files\National Instruments\Shared\LabVIEW Run-Time\8.2\lvrt.dll).
    Convert_Temp requires a version 8.2.1 (or compatible) LabVIEW Run-Time Engine. Please contact the vendor of Convert_Temp to correct this problem.
    I checked the folder: C:\Program Files\National Instruments\Shared\LabVIEW Run-Time\8.2\. It has the file lvrt.dll.
    So why am I getting this error?
    GKB

    sounds like you need to install the LabVIEW 8.2.1 runtime. Not the 8.2 runtime engine.
    Paul <--Always Learning!!!
    sense and simplicity.
    Browse my sample VIs?

  • Error while using DB Adapter in BPEL process

    Hi All,
    I am getting error while using DB Adapter in BPEL process
    java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:575) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:381) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:298) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.el.parser.AstValue.invoke(AstValue.java:157) at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283) at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53) at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1259) at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:97) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:91) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:698) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:285) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) Caused by: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:260) at oracle.sysman.emSDK.webservices.wsdlparser.OperationInfoImpl.invokeWithDispatch(OperationInfoImpl.java:985) at oracle.sysman.emas.model.wsmgt.PortName.invokeOperation(PortName.java:729) at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:569) ... 69 more Caused by: javax.xml.ws.soap.SOAPFaultException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:955) at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:750) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:234) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:105) at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:256) ... 72 more
    I have created jndi from console which I have mentioned in DBAdapter and I have provided details of JNDI to DbAdapter in deployment.
    I am not able to solve this.
    Can you please let me know solution for this or provide me link for tutorial of DBAdapter for stored procdure call?

    did u deploy your dbadapter through console to the plan mentioned for deployment?

  • Error while using XML Iview, please contact your system administrator.

    Hello everybody,
    I have already posted a detailed message for the XML iview problem sometime back but havent got any reply so far. All the replies had come from users who are also facing the same problem. I am trying to use a XML iview for fetching RSS feeds from one of the internet source, i have entered the proper URL and selected the proper RSS to XHTMLB transformer also and have entered the proxy settings in the http service and enabled it and restarted it also, but again when i am previewing the Iview its giving me the error <b>"Error while using XML Iview, please contact your system administrator."</b>. I am using
        Area           Version
        J2EE Engine    6.40 PatchLevel 98256.313
        Portal         6.0.14.0.0
    , can someone tell me whether its a bug in sp14 or i am missing something while creating this XML Iview. Expecting a proper reply.
    Thanks in advance,
    Regards,
    Sarabjeet.

    Hi Sarabjeet,
    The XML iView uses server-side fetching, so if you are having problems with a regular URL iView in server-side fetching mode, so the problem with the XML iVIew probably has to do with the proxy settings.
    And since you got a 407 error, it seems there is an issue with proxy settings or the proxy server, as mentioned in this description of 407 error:
    The HTTP 407 code only applies to users who are accessing the Internet behind a proxy server. This is common in government and corporate workplaces. The 407 code indicates that your computer must first authenticate itself with your company's proxy server. Check with your IT department or computer support group as to the exact reason why you may be getting this error. It may be possible that the proxy server does not allow downloads of specific files (exe, cab, com). You can also verify that your proxy server settings are valid.
    I will check if I can find out any more specific info.
    Daniel

Maybe you are looking for

  • AP INVOICE작성중 PO MATCH시 ORA-01403 ERROR.

    제품 : FIN_AP 작성날짜 : 2004-10-25 AP INVOICE작성중 PO MATCH시 ORA-01403 ERROR. ======================================== Problem Description AP Invoice작성시 Tax Code를 User의 코드로 선택후 PO Match를 하게 되면 아래와 같은 Error Message가 뜨면서 전표가 생성이 않됨. Tax Code가 VAT일 경우에는 PO Mat

  • What are the advantages to using SAP Dynamic Documents?

    Sorry, didn't realize I had this post in the Objects forum. Posting this in ABAP General. Posted: Dec 6, 2010 11:58 PM Hello, Are there any advantages like portability and others to using dynamic documents rather than list programming. The SAP provid

  • How to retrive my security question?

    How can i retrive my security answer when i forgot my resuce email?

  • What does error :40106 - No navigable items in destination block means ?

    I have a couple of blocks in my form . One is a control block and the others are database blocks . I get this error when I click on the search button in my form . Thanks.

  • I lost my imac data.

    Hi there Actually i've got a problem loosing my imac data when my girl installs the original two discs( Mac os x install Disc 1 & 2) that come with the imac. i was trying to to stop the installation but i couldn't. So in such case what to do to resto