Error window crashes program.

I have an error window "swatch not found" that opens with the file. When I submit a report, quit or close the window, Muse crashes.

Please send us a copy of your .muse file at [email protected] and include a link to this thread. If it's too big for e-mail (>20 mb) you could use a service like Dropbox, Adobe SendNow, WeTransfer, etc. Thanks.

Similar Messages

Very Urgent !!!! Windows Crashing when running a LabVIEW Program using Comact DAQ Chassis

I am using a Compact DAQ Chassis with a AI and a DO Card. The chassis is connected to the USB post of the computer. ( There is no other device connected to the laptop.) When the program is running, WIndows crash and gives a stop error. This has happened several times. Please help.
Thanks.

Hi,
I have a few questions for you, so that we may better troubleshoot your issue.
1. Are you able to view the device in MAX and communicate with it?
2. Could you attach a screen shot of the error you are receiving?
3. Have you been able to use this cDAQ chassis without the modules in it? Do you see the same behavior?
4. Have you tried using this chassis with another laptop? Do you see the same behavior?
If you would like to speak with an Applications Engineer directly, please visit ni.com/ask and create a service request.
Amanda Howard
Americas Services and Support Recruiting Manager
National Instruments

After an iTunes update failed to install iTunes won't open and I get lthe folloowing error messages. Program can't start because MSVCR80.dll is missing, and iTunes not installed correctly. please reinstall iTunes. Error 7( windows errpr 126)

After an iTunes update failed to install, iTunes won't open and I get the following two windows. Program can't start because MSVCR80.dll is missing from your computer, and iTunes not installed correctly. Please reinstall iTunes. Error 7 (windows error 126) When I reinstall I get the same messages and ITunes won't open.

Click here and follow the instructions.
(98815)

HT1379 My iMac (2011) has been persistently throwing this error message: "SafariDAVClient quit unexpectedly." This started when I moved up to Mavericks. Nothing crashes, and all I have to do is click "ok" to get rid of the error window. Still, annoying. H

My iMac (2011) has been persistently throwing this error message: "SafariDAVClient quit unexpectedly." This started when I moved up to Mavericks, from Lion. Nothing crashes, and all I have to do is click "ok" to get rid of the error window. Still, annoying, as this darn Error message pops up at least every 60 seconds Help?
Here is thev error data that shows up in my Console after it happens. Of course, it might as well be GREEK TO ME!:
Process:         SafariDAVClient [5937]
Path:            /System/Library/PrivateFrameworks/BookmarkDAV.framework/Versions/A/Helpers/Safa riDAVClient
Identifier:      SafariDAVClient
Version:         106
Code Type:       X86-64 (Native)
Parent Process: launchd [202]
Responsible:     SafariDAVClient [5937]
User ID:         501
Date/Time:       2014-02-02 15:40:22.026 -0800
OS Version:      Mac OS X 10.9.1 (13B42)
Report Version: 11
Anonymous UUID: 38C42EEE-0927-2A62-02AC-FE5E1CEBFA44
Sleep/Wake UUID: F4BAEB51-39DA-42AE-8105-AB27895B59BD
Crashed Thread: 0 Dispatch queue: com.apple.Safari.BookmarkFolder.childrenAccess
As well, my iCloud Pref Pane will not open!
What the HECK is goin' on?

feckinHell wrote:
As well, my iCloud Pref Pane will not open!
That's related since the process is attempting to load your Safari bookmarks from iCloud, and is crashing for some reason.
Try this:
Select the entire line that follows (triple-click to select it), then control-click, and from the contextual menu that appears, select Services > Reveal in Finder:
~/Library/Caches/com.apple.iCloudHelper
Drag that entire folder to the Desktop.
Quit Safari.
Attempt to open iCloud Preferences again. If it opens de-select Safari.
Launch Safari again and determine if the problem is fixed.

Windows 8.1 and VS2012 SDK get error "Windows Program Compatibility mode is on. Turn it off and then try Setup again."

When trying to install VS2012 SDK on Windows 8.1 get the error "Windows Program Compatibility mode is on. Turn it off and then try Setup again."
See my blog C# Bits | Twitter @sjnaughton Always seeking an elegant solution.

Rick, Have you had any success with this? I'm also trying to run the tfs_VssUpgrade.exe tool on my Windows 8.1 machine and getting the same exception. Greatly appreciate any insight if you were able to get past this issue! Thanks, Steve
Same issue here.
This MS connect thread
is interesting however.
Posted by Microsoft on 9/19/2013 at 2:54 PM
Hello Alxandr,
Thank you for taking the time to submit this issue to Connect. This is a known issue with Windows 8.1 RTM and it will be addressed in a future update of Windows 8.1. In the meantime, you can typically rename the EXE to get it to work correctly.

Adobe Acrobat Reader 10.1.2 Print Issues - Windows Crash Error (2 Sided)

Have recently had issueswith our upgrades from 10.1.1 to 10.1.2 in regards to the following:
When printing 2 sided on a Fuji Xerox Firefly C4400 Atheros, application crashes after printing first 4 pages.
Thus, have tried the patch fix that was recommended on cpsid_92870 however this has not fixed the problem.
Have also tried the solution with the duplexing but still same issue, Windows crashes.
Have also tried solution to remove Windows patch KB4332667 and still same issue.
Screen shots will be provided upon request with the errors.
Currently running:
Windows XP SP3
Adobe Acrobat Reader 10.1.2
Printer Drivers are the latest and over 500 users on network. 485 are working on 10.1.1 which do not have this issue.
Is there any solution or 10.1.3 patch release that will address this issue?
Last Adobe user to work on this was Atul.

Sonal2890, thanks for your inquiry and I will try to provide as much information as possible.
1. What happens if inspite of using 'Print on both sides', you check Duplex setting from Properties dialog (As you do previously)?
      The Adobe Reader X Shuts down and is unable to print and displays a message stating it has incurred a problem. Please note, we are running IE7.
2. What happens if you print with any other application (Word/notepad)
     The documents print fine. IT is only when you print this particular document which is enabled in protected mode and double sided. Have tried the patch and the resolution of unticking the duplex methodology and the issue still persists.
     Crash Logs have already been submitted already. Have added the SEnd Error Report that was provided when the error occurs. The PDF stopped printing after page 6 of a 236 page document and provided the error above.

Suppressing "reopen windows" dialog when restarting a crashed program

Hi All,
Is there any way of suppressing the alert dialog that pops up when restarting a crashed program? The alert's text reads:
"The last time you opened <app name>, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again?"
I want the OS to just open the program without asking me this, since the computer is being used in a kiosk-type application.
Thanks,
c.

Yes, I still have access to the keyboard for a tty. It's just that X doesn't respond to any keyboard inputs.
I totally didn't know that you could run stuff on an X display from a tty. Worked with env DISPLAY=:0.0 xeyes
I think this is the most elegant solution.
The Ctrl+Alt+Bksp can no longer be activated with Option "DontZap" "false". There is a way to re-enable it with HAL or a setting in KDE/Gnome keyboard layout settings. It still kills everything in the X session though.
Thank you very much

Install windows phone 8.0 sdk on win 10 error Windows Program Compatibility mode is on. Turn it off and then try Setup again.

install windows phone 8.0 sdk on win
10 error Windows Program Compatibility mode is on. Turn it off and then try Setup again.

Also having this issue. I am unable to remove Windows Phone Emulator 8.0 on Windows 10 Technical Preview. Here is the relevant log file output
[6554:4F4C][2014-10-31T13:33:53]: Condition 'NOT (CurrentOperation = "Uninstall")' evaluates to true.
[6554:4F4C][2014-10-31T13:33:53]: Condition '(CurrentOperation = "Install") OR (CurrentOperation = "Repair")' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition '(CurrentOperation = "Install") OR (CurrentOperation = "Repair")' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition '(CurrentOperation = "Install") OR (CurrentOperation = "Repair")' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition '(CurrentOperation = "Install")' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition '(VersionNT < v6.1) OR ((VersionNT = v6.1) AND (NTProductType < 3)) OR (NOT VersionNT64)' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition '(VersionNT = v6.2) AND (netfxfullredist_43_DetectKey < v4.5.50709)' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition 'CompatibilityMode = 0' evaluates to true.
[6554:4F4C][2014-10-31T13:33:53]: Condition 'ProfessionalVersion_DetectKey AND (NOT (ProfessionalVersion_DetectKey = "11.0.50727")) AND (CurrentOperation = "Install")' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition '( VS11BETA_MSENV_DLL_EXISTS ) AND ( VS11BETA_MSENV_DLL_VERSION < v11.0.50324.0 ) AND (CurrentOperation = "Install")' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition 'WPExpressVersion_DetectKey AND (WPExpressVersion_DetectKey < v11.0.50727) AND (CurrentOperation = "Install")' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition 'WPExpressVersion_DetectKey AND (WPExpressVersion_DetectKey = v11.0.50727) AND (CurrentOperation = "Install") AND WPExpressQFEVersion_DetectKey AND (WPExpressQFEVersion_DetectKey < 38)' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition 'WPExpress10_Exists AND (NOT SameLcidWPExpress10_Exists) AND CurrentOperation = "Install"' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition 'WPExpress11_Exists AND (NOT SameLcidWPExpress11_Exists) AND CurrentOperation = "Install"' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition 'NOT Privileged' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: MUX: Stop Block: CompatibilityMode : Windows Program Compatibility mode is on. Turn it off and then try Setup again.
[6554:4F4C][2014-10-31T13:33:53]: MUX: Detect Completed
[6554:4F4C][2014-10-31T13:33:53]: MUX: Wait for View to be loaded
[6554:40A0][2014-10-31T13:33:53]: MUX: Detect Completed, now create view
[6554:40A0][2014-10-31T13:33:54]: MUX: Validate custom path failed: Empty Install path
[6554:40A0][2014-10-31T13:33:54]: MUX: Validate custom path failed: Empty Install path
[6554:40A0][2014-10-31T13:33:54]: MUX: User feedback control is Enable because opt-in value is NotDefined
[6554:4F4C][2014-10-31T13:33:54]: MUX: View loaded
[6554:4F4C][2014-10-31T13:33:54]: MUX: Go to Blocker page.
[6554:4F4C][2014-10-31T13:33:54]: Detect complete, result: 0x0

Clone tool: program error window (El. 8.0)

When I try to use the clone tool a window opens saying there is a program error. Is there a way to fix this? I was wondering if reinstalling the program was necessary or if there may be some other way around the problem.
Thanks in advance.
Joe

Barbara, I had a reply from Adobe help centre. I haven't been able to try tis yet, but hoefully it will help you.
Joe
Kindly follow this method to use clone stamp tool in PSE8.
1. select the layer you would like to work on.
2. select clone stamp tool form tool box.
3. Press ALT+ left mouse click , to choose the area.
4. now start painting.
NOTE: I believe you are not selecting the area by pressing Alt+left
mouse click.
Kindly read the help file link to learn more about this tool.
http://help.adobe.com/en_US/PhotoshopElements/8.0/Win/Using/WSae2ea3b149
d0c3591ae939f103860b3d59-7ed8_WIN.html
In-case you are using the correct work-flow however you are still
getting the error message then I would advice you to recreate Pref
erences for Photoshop Element 8 by following this method.
1. close Photohsop Element (if it is open).
2. press ShiftCtrlAlt these 3 buttons on your keyboard , do not
release these 3 buttons and launch Photoshop Element.
3. do not release the three buttons and click on edit to launch editor.
A small window will appear for asking you to choose yes or no [ you may
now release the three buttons]
4. choose yes when it ask you to delete preferences.
Date: Thu, 18 Mar 2010 16:37:32 -0600
From: [email protected]
To: [email protected]
Subject: Clone tool: program error window (El. 8.0)
When PSE goes whacky the first thing to do is to reset the preferences. Quit the editor (quit PSE if on a mac), then restart it while holding down CTRLALTShift (CommandOptionShift on a mac). Keep holding the keys till you see a window asking if you want to delete the settings file. You do.
>

While trying to download iTunes to a Windows 7 PC I got the following error message: a program reqjuired for this install to complete could not be run. Any suggestions.

While trying to download the 64 bit version of iTunes for a Windows 7 PC, I got the following error message: A program required for this install to complete could not be run. Any suggestions?

I would try removing and reinstall the Apple software using:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Opening Firefox via Win7 Favorites produces error window, "There was a problem sending the command to the program."

Even though the error window pops up, the chosen website comes up normally in the browser. But I have to close the error window each time. This does not happen with Internet Explorer

Try create a new shortcut.
Go to '''Program Files''' then '''Mozilla Firefox''' folder then '''right click''' on the firefox.exe file and click '''Send to''' then '''Desktop (Create shortcut)''' to create the new shortcut to open Firefox.
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

When I open Firefox I have to try several times because a Runtime Error with the program C:\Windows\System32\regsvr32.exe

when I open Firefox I have to try several times because a Runtime Error with the program C:\Windows\System32\regsvr32.exe

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "Continue in Safe Mode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Jabber for windows crashing

Jabber for windows - crashes on start up
CUCM 7.1.3
Windows 7 32 bit
Cisco Presence   8.0.2.10000-30
- these are in the application event log
Log Name:      Application
Source:        MsiInstaller
Date:          6/27/2012 10:43:19 PM
Event ID:      11729
Task Category: None
Level:         Information
Keywords:      Classic
User:          WGL\bfairchild
Computer:      CORPLAPR8YK305.corp.wgtnet.com
Description:
Product: Cisco Jabber -- Configuration failed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="MsiInstaller" />
    <EventID Qualifiers="0">11729</EventID>
    <Level>4</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2012-06-28T02:43:19.000000000Z" />
    <EventRecordID>35189</EventRecordID>
    <Channel>Application</Channel>
    <Computer>CORPLAPR8YK305.corp.wgtnet.com</Computer>
    <Security UserID="S-1-5-21-867046329-488861948-689510791-2168" />
</System>
<EventData>
    <Data>Product: Cisco Jabber -- Configuration failed.</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>
    </Data>
    <Binary>7B45353431313243312D463832412D343834372D383633312D4341313833384541353442347D</Binary>
</EventData>
</Event>
Log Name:      Application
Source:        MsiInstaller
Date:          6/27/2012 10:43:18 PM
Event ID:      11706
Task Category: None
Level:         Error
Keywords:      Classic
User:          WGL\bfairchild
Computer:      CORPLAPR8YK305.corp.wgtnet.com
Description:
Product: Cisco Jabber -- Error 1706. No valid source could be found for product Cisco Jabber. The Windows Installer cannot continue.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="MsiInstaller" />
    <EventID Qualifiers="0">11706</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2012-06-28T02:43:18.000000000Z" />
    <EventRecordID>35188</EventRecordID>
    <Channel>Application</Channel>
    <Computer>CORPLAPR8YK305.corp.wgtnet.com</Computer>
    <Security UserID="S-1-5-21-867046329-488861948-689510791-2168" />
</System>
<EventData>
    <Data>Product: Cisco Jabber -- Error 1706. No valid source could be found for product Cisco Jabber. The Windows Installer cannot continue.</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>
    </Data>
    <Binary>7B45353431313243312D463832412D343834372D383633312D4341313833384541353442347D</Binary>
</EventData>
</Event>
Log Name:      Application
Source:        Microsoft-Windows-RestartManager
Date:          6/27/2012 10:43:15 PM
Event ID:      10000
Task Category: None
Level:         Information
Keywords:
User:          WGL\bfairchild
Computer:      CORPLAPR8YK305.corp.wgtnet.com
Description:
Starting session 0 - ‎2012‎-‎06‎-‎28T02:43:15.619915900Z.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-RestartManager" Guid="{0888E5EF-9B98-4695-979D-E92CE4247224}" />
    <EventID>10000</EventID>
    <Version>0</Version>
    <Level>4</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2012-06-28T02:43:15.620916000Z" />
    <EventRecordID>35187</EventRecordID>
    <Correlation />
    <Execution ProcessID="8160" ThreadID="8616" />
    <Channel>Application</Channel>
    <Computer>CORPLAPR8YK305.corp.wgtnet.com</Computer>
    <Security UserID="S-1-5-21-867046329-488861948-689510791-2168" />
</System>
<UserData>
    <RmSessionEvent xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/2005/08/Windows/Reliability/RestartManager/">
      <RmSessionId>0</RmSessionId>
      <UTCStartTime>2012-06-28T02:43:15.619915900Z</UTCStartTime>
    </RmSessionEvent>
</UserData>
</Event>
Log Name:      Application
Source:        MsiInstaller
Date:          6/27/2012 10:43:15 PM
Event ID:      1040
Task Category: None
Level:         Information
Keywords:      Classic
User:          WGL\bfairchild
Computer:      CORPLAPR8YK305.corp.wgtnet.com
Description:
Beginning a Windows Installer transaction: {E54112C1-F82A-4847-8631-CA1838EA54B4}. Client Process Id: 8400.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="MsiInstaller" />
    <EventID Qualifiers="0">1040</EventID>
    <Level>4</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2012-06-28T02:43:15.000000000Z" />
    <EventRecordID>35186</EventRecordID>
    <Channel>Application</Channel>
    <Computer>CORPLAPR8YK305.corp.wgtnet.com</Computer>
    <Security UserID="S-1-5-21-867046329-488861948-689510791-2168" />
</System>
<EventData>
    <Data>{E54112C1-F82A-4847-8631-CA1838EA54B4}</Data>
    <Data>8400</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>
    </Data>
</EventData>
</Event>
Log Name:      Application
Source:        MsiInstaller
Date:          6/27/2012 10:43:14 PM
Event ID:      1001
Task Category: None
Level:         Warning
Keywords:      Classic
User:          WGL\bfairchild
Computer:      CORPLAPR8YK305.corp.wgtnet.com
Description:
Detection of product '{E54112C1-F82A-4847-8631-CA1838EA54B4}', feature 'Cisco_Jabber_Files' failed during request for component '{14F2AABC-F10C-4DE6-BC0E-28ED6D7F8508}'
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="MsiInstaller" />
    <EventID Qualifiers="0">1001</EventID>
    <Level>3</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2012-06-28T02:43:14.000000000Z" />
    <EventRecordID>35185</EventRecordID>
    <Channel>Application</Channel>
    <Computer>CORPLAPR8YK305.corp.wgtnet.com</Computer>
    <Security UserID="S-1-5-21-867046329-488861948-689510791-2168" />
</System>
<EventData>
    <Data>{E54112C1-F82A-4847-8631-CA1838EA54B4}</Data>
    <Data>Cisco_Jabber_Files</Data>
    <Data>{14F2AABC-F10C-4DE6-BC0E-28ED6D7F8508}</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>
    </Data>
</EventData>
</Event>
Log Name:      Application
Source:        MsiInstaller
Date:          6/27/2012 10:43:14 PM
Event ID:      1004
Task Category: None
Level:         Warning
Keywords:      Classic
User:          WGL\bfairchild
Computer:      CORPLAPR8YK305.corp.wgtnet.com
Description:
Detection of product '{E54112C1-F82A-4847-8631-CA1838EA54B4}', feature 'Cisco_Jabber_Files', component '{826A7892-74F0-481D-B5F2-3F733F91DB81}' failed. The resource 'C:\Program Files\Cisco Systems\Cisco Jabber\JabberMeeting\DesktopShare\atgpcdec.dll' does not exist.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="MsiInstaller" />
    <EventID Qualifiers="0">1004</EventID>
    <Level>3</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2012-06-28T02:43:14.000000000Z" />
    <EventRecordID>35184</EventRecordID>
    <Channel>Application</Channel>
    <Computer>CORPLAPR8YK305.corp.wgtnet.com</Computer>
    <Security UserID="S-1-5-21-867046329-488861948-689510791-2168" />
</System>
<EventData>
    <Data>{E54112C1-F82A-4847-8631-CA1838EA54B4}</Data>
    <Data>Cisco_Jabber_Files</Data>
    <Data>{826A7892-74F0-481D-B5F2-3F733F91DB81}</Data>
    <Data>C:\Program Files\Cisco Systems\Cisco Jabber\JabberMeeting\DesktopShare\atgpcdec.dll</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>
    </Data>
</EventData>
</Event>

Hi,
Jabber is attempting to repair itself from a conflict with the WebEx productivity tools. However, it is looking for the original install file (.msi), cannot find it and therefore the repair fails. To work around this problem you need to:
1 - Download the same version of CiscoJabberSetup.msi that is installed. You can check the version by finding CiscoJabber.exe in your Program Files directory, right click, Properties and on the Details tab there is a product version.
2 - Copy this file to the location fro which you previously installed Jabber. For example, if you downloaded the .msi to your desktop previously, do the same here again. If you got this update as part of an auto update, then copy the file to "%temp%".
3 - Launch Jabber - it should successfully repair itself and launch.
Thanks,
Rob.

Error message c:\program files (x86)\itunes\ituneshelper.exe r6034

can not log into itunes, get the following error message: c:\program files (x86)\itunes\itunes help.exe
R6034
I have uninstalled and reinstalled and still unable to login

Apple's advice on this issue can now be found here: TS5376: iTunes 11.1.4 for Windows: Unable to install or open.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See the user tip Backup your iTunes for Windows library with SyncToy for a suggested strategy.
If you have difficulty downloading the iTunes setup file try clearing your browser's cache or using an alternate browser.
If content is missing from the library following the repair see Empty/corrupt iTunes library after upgrade/crash.
For device connectivity issues following the repair see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5.
MobileMe is a discontinued service and should be removed if present. See HT2992: MobileMe: Uninstalling the MobileMe Control Panel for Windows for details.
tt2

Windows crashes upon Java exit.

Firstly, I apologise that I know very little about Java and if I've omitted any important information here I may need precise instructions on how to find it out.
According to the Add/Remove Programs menu, I have 'JS2E Runtime Environment 5.0 Update 6', version '1.5.0.60' installed.
My problem is that, in any of the following situations, Windows crashes and I either get a BSOD reporting a 'stop error', or my computer reboots itself:
1) I exit the Java Control Panel, attempt to clear temporary files using the Java Control Panel, or exit certain settings windows/message boxes from the Java control panel (Always occurs)
2) I exit Limewire (which I assume has some embedded Java applet) (Always occurs)
3) I exit a Java executable (.jar file) (Always occurs)
4) I exit Internet Explorer or Firefox (sometimes occurs. I think it's safe to assume this is when I've visited a site with a Java applet, but I haven't tested this)
5) I end the javaw.exe process from Windows Task Manager (always occurs)
6) I attempt to uninstall Runtime Environment 5.0 Update 6 from the Add/Remove Programs menu (always occurs. The crash happens a good while into the uninstallation, however)
Is this a known issue? What is the cause/possible cause? How can it be resolved, given that I can't uninstall Java?

This is a long shot, but anti-aliasing and/or video driver problems seem to cause most of the crashes. So try the following and respond back whether it worked or not.
Make sure you have anti-aliasing set to Application-Controlled: http://www.java.com/en/download/help/5000041100.xml
Make sure you've updated to the latest video drivers.
Make sure Directx is updated to the latest version.
If that still doesn't work read http://forum.java.sun.com/thread.jspa?threadID=661574 and then try adding to your environment JAVAOPTIONS variable -Dsun.java2d.d3d=false. If that doesn't work try -Dsun.java2d.noddraw=true
If the problem was AA, then and you still want to force all 3d applications to use AA and you don't want to keep changing your graphics card display options, you can disable java's use of the Direct3D by setting an environment variable JAVAOPTIONS to -Dsun.java2d.d3d=false. This will allow you to keep your AA settings. Disabling Direct3D is the proposed update to 1.5 (Update 8) to fix this bug. See http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6311320

Error window crashes program.

Similar Messages

Maybe you are looking for