Error: Windows Azure is currently performing an operation on this hosted service that requires exclusive access.

Hello,
We are creating 2 cloud services in parallel with one deployment(VM Role) in each cloud service. For both requests (Sometimes only on 1) we are getting the following 409 Conflict error as a response to create hosted service POST request:
409 ConflictError :
Windows Azure is currently performing an operation on this hosted service that requires exclusive access.
On getting the exception we have a cleanup call and in retry we are trying to create again. On each retry we are using a new cloud service name.
The error occurs few times, every time we invoke the creation of 2 cloud services with VM in parallel. And on 2-15 retries, its getting created successfully. However when we invoke 1 cloud service creation with VM, we are not seeing this error.
Not sure why this error is thrown during simultaneous creations. Any help would be greatly
appreciated.
Thanks.

Hi Sowmya,
We are using the REST APIs for all our operations – Edit:
Creating two cloud services with one virtual machine (IaaS) each having
two different deployment IDs.
Step by Step procedure for creating the services:
1.
Create an Affinity Group
2.
Create a Virtual Network
3.
Create Hosted service
4.
Create Deployment (VM Role) under that hosted service
Step 3 & 4 are executed concurrently for two different VM Creation where it is failing with 409 Conflict error.
Also, the two cloud services are being deployed under the same Virtual Network and same Affinity Group. Apart from this there are no shared resources
between two cloud services.
Please let us know if you have more queries.
Thanks.

Similar Messages

Swap Error: Windows Azure is currently performing an operation on this deployment that requires exclusive access.

When swapping our deployments for a web role, we are receiving an error, "Windows Azure is currently performing an operation on this deployment that requires exclusive access." We have been waiting patiently for over 48 hours and the error
persists. We have deployed/swapped many times before without issue. The dashboards do not show any known Azure issues at this time. We are stuck with an out-dated deployment.
We have deleted the staging deployment and tried again and it still does not work. It appears to be an issue with the production deployment.
Other threads state to create a support ticket. So we have attempted to do so with the following scenario: We are a BizSpark Plus partner and have MSDN tickets available to use for support. It bites that we have to use 1 for this Azure
issue. However, it appears you can't use MSDN support tickets for Azure as each time you go to create a ticket, it kicks you back to Azure to force the purchase of an Azure support plan...??

If you have the MSDN support plan, please contact their local Global Customer Service center for assistance in creating a Azure support case.
Customers can locate the nearest Customer Service center at following site
http://support.microsoft.com/gp/customer-service-phone-numbers
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Regards,
Jacky Wu
Microsoft Online Community Support

An error occurred while attempting to perform the operation.

Hi All,
I am getting an error while running the report:
"An error occurred while attempting to perform the operation. Then operation did not complete successfully."
Although I can see the data coming is correct, but don't know why this error is coming.
I have seen for NULL values.
How can I see the detail log to trace the error?
Please help.
Thanks,
Himanshu Tiwari

Hi,
You can login as system using SQLPlus and use the DBMS_SYSTEM.set_sql_trace_in_session procedure to set trace on another Discoverer session. This should establish if there is any database error occuring in the Discoverer session.
Rod West

SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory

SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory
after retry..again SharePoint Designer requires the following component require to install Microsoft.NET framework version 4 i have downloaded and try to installed but fail not work please answer what to do?
Thanks and Regards, Rangnath Mali

Hi Rangnath,
For running SharePoint Designer 2013, you need to install Microsoft .NET 4.0 Framework or higher.
Please uninstall the Microsoft .NET 4.0 Framework, and install it again. After that, reboot your machine.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Remote Desktop Services that require Native SQL Server Client in Windows Server 2012?

I have somehow gotten really confused on this.. Is the Remote Desktop Connection Broker the only Remote Desktop Service that requires the SQL Native Client to be installed in Windows Server 2012 (r2) ?

Hi,
If you plan on configuring RDCB in HA mode then the SQL native client is required. The other RDS role services do not require it.
-TP
Is High Availability Mode enabled by Default?

An error occured while attempting to perform the operation.

Hi
I'm getting the following error message in my disco plus report.
"An error occured while attempting to perform this action. The operation did not complete successfully.
Extra Internal info:
(OLException
Cause:OLException {
Code: OLCmRefException::eNullRef
Args: OLCmRefException::eNullRef
I have searched the forum but have found no usefull information for me.
The problem occured when I added a calculation to woorkbook that was working perfectly fine before. Now I can't even remove any item or calculation (or anything) from the worksheet.
I then edited the calculation to just show "1" instead which allowed me to remove that certain calculation, but I can still not remove any item.
Please ask if more details are needed.
What can have caused this problem, and is there a way to solve it? Do I have to redo the entire report?
BR
Robert

Robert,
We encountered this issue with our 10.1.2.54.25 installation on a Solaris OS. We are currently at CP3. We have tried CP4, 5, 6 and 7. No resolution. Oracle has replicated our issue assigned a bug # and say that they have found a fix but it will not be made available until the release of 10.1.2.3 CP2. We have requested a one-off patch for 10.1.2.54.25 CP7. They are currently thinking about it. We have been hung up since Feb. '08 and not be able to resolve any bugs because of this problem.
Jerre

Error: BACKUP A:.Trashes (current privileges do not allow this operation)?

I recently purchased a Western Digital Elements external USB hard drive, 1TB capacity. I bought this as a backup HD and figured it would be plug-and-play. I’ve owned several external HDs without issues; in fact I own a WD MyBook external drive that is a few years old which has been flawless.
In order to set the HD up for the Mac platform, I followed instructions. I plugged it in and ran Disk Utility to format it. Settings for the formatting are Mac OS Extended (journaled), with Apple Partition Map selected. I set it for one partition.
Everything apparently formats fine. I named the WD Elements HD ‘BACKUP A’. Unfortunately, when I go to run my backup program ‘_Synchronize! Pro X_,’ I cannot do a routine backup! I’ve never had any problems with this backup software, ever, including usage with several external discs (including WD external disks).
Now, when I hit click on the button in _Synchronize! Pro X_ to initiate the backup, I get an error message: ‘BACKUP A:.Trashes (current privileges do not allow this operation)’ and the program stops the operation. I can't resolve the problem. I am not performing a boot-able backup, just a regular backup.
I tried reformatting the WD hard drive several times and I get the same message.
I called Western Digital’s tech service and they also wanted me to reformat and still I get the same error message. Then they had me do it all over, this time connected to my laptop (iBook G4), but nothing changed. WD said they didn't understand the error message: after their technicians failed to get the drive to work w/my backup software, they declared the drive defective and I was sent out another brand new drive (from DELL). I just formatted the new replacement drive for my G5 and when I ran Synchronize! Pro X, I get the same error message! I reformatted this replacement drive but still it makes no difference. Gah!
I am at wits end. I searched the web but can’t find anything. I need to backup my data ASAP and resolve this issue.
Anyone have any suggestions?
Thanks a bunch!!

Another detail from SPX's log:
10/29/10 5:42 PM Starting backup for "Untitled 2".
Backing up THE CAPTAIN => BACKUP A. 5,783 files (5.90 GB) to copy.
* An error occurred while preparing to delete a folder.
Current privileges do not allow the operation.
Path: BACKUP A:.Trashes
* 10/31/10 11:12 AM Backup cancelled. 0 files (0 K) copied.
I'll look into your recommendation a little later regaring possible damaged .plist file.
With Carbon Copy Cloner (CCC), I'm discovering that I have a new backup shortcoming. This new external backup HD is USB (actually, it's my second backup) and since the backup source is a PowerPC, Carbon Copy Cloner cannot create a bootable backup. I need to have my Apple 'Mail' program with all its archived emails, as well as my library>mail downloads, and numerous other system and user files backed up. When using CCC to back up the entire PowerPC source drive to the target USB drive, none of the above listed files are copied.
With a daily routine backup regimen solidly in place, having a second bootable backup drive (and having my mail and associated system files backed up) may not be as mission critical, although I'd certainly prefer all system files associated with my user to be on two separate backups.
However, at present I am nearing completion of a major primary drive upgrade and system reorganization, and my 1st backup drive is an archived backup from before the upgrade....I want to make certain everything is squared away before I erase that archive. Therefore, this new USB HD is my only current backup until I complete the transition. I want security knowing my system user files are backup up before I move forward.

I just updated to 10.9.3. I now cannot open Mail - it comes up with an error window and suggests it may be incompatible with this OS. What is the fix for this? Thanks

When I try to open Mail from the launchbar it won't open and comes up with a window saying it may be incompatible with this version of OS X.
What is the answer to fix this?!

Backup for safety on at least two reliable drives.
Reinstall using the combo update at http://support.apple.com/kb/DL1746
You would be wise to quit all apps, disconnect all peripherals and preferably delete all email accounts before upgrading.

I am using NI DAQ6508, I would to know if I can set port C upper 4 bits for input and lower 4 bits to perform output operations. I am aware that Port B and Port C have all 8 bits as input or output.

The Daq manual indicates that port c (under mode 0) can be configured such that the nibbles can perform independently.

Hey Sesh,
If you refer to the Traditional NI-DAQ Function Reference Help, and then the function DIG_Prt_Config, it states, that ports 0,3,6, and 9 of the 6508 can be used as bidirectional, but only when you use handshaking. So the answer is no, you cannot configure port C with four input and four output lines.
However, I have attached a c file that contains the function calls necessary to configure the lines separately on an E Series digital board. Feel free to try these calls out and let us know if it doesn't fail, although our KnowledgeBase says that it should.
Justin T.
Attachments:
digital_ud.c ‏4 KB

I cannot access Yahoo Mail, gives an error "Bad Request" in the tab? What does this mean and how can I access my mail?

I downloaded the latest version of Firefox 8.0.1. I have an Intel imac with os 10.6.8. I can log onto the Yahoo website, but not my e-mail, it works fine in Safari but not with FF? I get a message in the tab that reads"Bad Request", never seen this before, has anyone else?

That issue can be caused by corrupted cookies.
*https://support.mozilla.com/kb/Cannot+log+in+to+websites
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies"

Windows Azure cloud service stuck / hangs on deploying

Today I tried to upload a package to the Windows Azure staging cloud service enviroment. The service hangs on deploying.
I can not delete or update this. I get this error
The staging deployment could not be updated for cloud service .......
Completed Uploading the package to the staging environment...
Completed Successfully uploaded the package to the staging environment.
Error The staging environment could not be updated.
Windows Azure is currently performing an operation with x-ms-requestid 13d49febc06f60b4bc36f3330274f68d on this deployment that requires exclusive access.
Do anyone knows how to fix this?

Yes, You may need wait some minutes,EG. http://social.msdn.microsoft.com/Forums/windowsazure/en-US/eb76c4c1-dcd0-427b-adfd-da6dd373beb8/azure-deployment-stuck-in-updating-state?forum=windowsazuretroubleshooting
Regards,
-billgiee

Windows Azure Pack setup - 500 Internal Server Error - failed to configure databases and services

Hi,
I am trying to setup the Windows Azure pack to use the site to configure the Service bus 1.1 installation. When I try to configure the Windows Azure Pack I get the following error:
Admin Authentication Site
500 Internal Server Error - Failed to configure databases and services: Object reference not set to an instance of an object.
I'm not sure where the logs are to see what is causing this error. I have tried running as admin, running as a different user with no luck.
thanks,
Georgi
Georgi

Here's what I'm getting for this error:
Log Name: Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite/Operational
Source: Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite
Date: 3/27/2014 12:52:03 PM
Event ID: 103
Task Category: (65431)
Level: Error
Keywords: None
User: CLINICALSYSTEMS\Administrator
Computer: SERVER-PC.clinicalsystems.com
Description:
##### Application_Error: Exception=System.Web.HttpException (0x80004005): Failed to configure databases and services: Object reference not set to an instance of an object. ---> System.Management.Automation.CmdletInvocationException: Object reference not
set to an instance of an object. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.AddUserToGroup(GroupPrincipal group, UserPrincipal user)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureDefaultTrusts()
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureClaimSecurity(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureCore(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.FeatureConfigurer.Configure(Hashtable settings)
at Microsoft.WindowsAzure.Server.PowerShell.Common.BaseCmdlet.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()
--- End of inner exception stack trace ---
at System.Management.Automation.Runspaces.PipelineBase.Invoke(IEnumerable input)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.PSClient.RunCommand(Command command)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.ConfigurationPSClient.InitializeFeature(String name, Hashtable settings)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<>c__DisplayClass3.<ConfigureFeature>b__0()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at lambda_method(Closure , Task )
at System.Web.Mvc.Async.TaskAsyncActionDescriptor.EndExecute(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass3f.<BeginInvokeAsynchronousActionMethod>b__3e(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<>c__DisplayClass2a.<BeginInvokeAction>b__20()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult)
at System.Web.Mvc.Controller.<>c__DisplayClass1d.<BeginExecuteCore>b__18(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.Controller.EndExecuteCore(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.MvcHandler.<>c__DisplayClass8.<BeginProcessRequest>b__3(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.HttpApplication.CallHandlerExecutionStep.OnAsyncHandlerCompletion(IAsyncResult ar).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite" Guid="{1F742CC8-BDAA-56B6-A4B8-49F946D19CD1}" />
<EventID>103</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>65431</Task>
<Opcode>0</Opcode>
<Keywords>0x0</Keywords>
<TimeCreated SystemTime="2014-03-27T16:52:03.223741300Z" />
<EventRecordID>111</EventRecordID>
<Correlation />
<Execution ProcessID="8068" ThreadID="7680" />
<Channel>Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite/Operational</Channel>
<Computer>SERVER-PC.clinicalsystems.com</Computer>
<Security UserID="S-1-5-21-3021050346-1670805799-1320812125-500" />
</System>
<EventData>
<Data Name="exceptionInfo">System.Web.HttpException (0x80004005): Failed to configure databases and services: Object reference not set to an instance of an object. ---> System.Management.Automation.CmdletInvocationException: Object reference not set to an instance of an object. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.AddUserToGroup(GroupPrincipal group, UserPrincipal user)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureDefaultTrusts()
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureClaimSecurity(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureCore(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.FeatureConfigurer.Configure(Hashtable settings)
at Microsoft.WindowsAzure.Server.PowerShell.Common.BaseCmdlet.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()
--- End of inner exception stack trace ---
at System.Management.Automation.Runspaces.PipelineBase.Invoke(IEnumerable input)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.PSClient.RunCommand(Command command)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.ConfigurationPSClient.InitializeFeature(String name, Hashtable settings)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<>c__DisplayClass3.<ConfigureFeature>b__0()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at lambda_method(Closure , Task )
at System.Web.Mvc.Async.TaskAsyncActionDescriptor.EndExecute(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass3f.<BeginInvokeAsynchronousActionMethod>b__3e(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<>c__DisplayClass2a.<BeginInvokeAction>b__20()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult)
at System.Web.Mvc.Controller.<>c__DisplayClass1d.<BeginExecuteCore>b__18(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.Controller.EndExecuteCore(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.MvcHandler.<>c__DisplayClass8.<BeginProcessRequest>b__3(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.HttpApplication.CallHandlerExecutionStep.OnAsyncHandlerCompletion(IAsyncResult ar)</Data>
</EventData>
</Event>
Kori Francis Lead Software Developer Clinical Support Systems, Inc.

Adobe Reader X - Runtime error - Windows 7

What am I doing wrong? Any ideas?
Installed Reader X 3 times since yesterday onto differnt Windows 7 machines - including once onto a clean Windows 7 Enterprise 32bit install (i.e. no old versions of anything to remove) - and on all atempts once the software is installed and run, i just get a runtime error and it won't open up. Screenshots below

This was exactly what I expected after I read that Adobe announced Reader X (X fits really because it is the best to terminate this software).
It is always the same - the quality of Adobe software is below each expectation. Now we have the already version 10 and Adobe has still not understood the difference of Windows XP and and Windows 7 regarding user profiles - I doubt that they ever heard the term "roaming profile" or "junction/symbolic link/hard link". Some people should be forbidden to program - if I would have the choice I would select another pdf viewer. And if you try to address these kind of issues Adobe acts deaf and simply says this not supported instead of fixing their stupid mistakes in their poor products - this approach is so easy - if they continue to behave in this way and exploit their current monopole they will not survive, because all disappointed customers will switch to the next best alternative as soon as they offers a less painful product or at least better support. I start to love Steve Jobs and Apple.
The question stays: Why Adobe reinvented a bug, which was already fixed in Adobe Reader 9 - what the hell are they doing in their programming caves in India - it looks like one programmer does not speak to the other or took a very old outdated code stream - very poor versioning and quality managment.
I have to deal all the time in my Company with these Adobe Pre-Alpha products full of bugs and I'm fed up to always run into major unsolved issues - Adobe test your products before you do a final release!!!! You ever heard about a public beta phase??????
This is from your own kb article: http://kb2.adobe.com/cps/404/kb404597.html
"This error occurs when the application checks for read permissions for each directory in the path to Application Data. The application is supposed to instead only inspect for permission in the Application Data directory and below. If the requisite permissions are not found, a runtime error occurs.
The 9.4 cumulative update changes this behavior so that the application does not check for permissions on parent folders."
So read your own fu..... KB before you release anything and make such a spectacle about a <sarcasm on> "complete new version, which is the most safe, reliable and convenient reader version ever <sarcasm off> (lol)

Bacpac import from Windows Azure into sql server 2012 fails

Very sorry if this is posted in the wrong froum I was not sure where to post
I am trying to verify a bacpac file I downloaded from my windows azure sql instance and I am getting this error when trying to Import into SQl server express 2012. SQL server 2008r2 is also installed on this machine. How can I fix this?
Count not load schema model from package. (Microsoft.SqlServer.Dac)
Program Location:
   at Microsoft.SqlServer.Dac.DacPackage.LoadModel(IPackageSource packageSource)
   at Microsoft.SqlServer.Dac.Extensions.DacExtensions.GetCollationString(IPackageSource packageSource)
   at Microsoft.SqlServer.Dac.Extensions.DacExtensions.GetCollationString(BacPackage package)
   at Microsoft.SqlServer.Management.Dac.DacWizard.CreateDatabaseOnTargetWorkItem.DoWork()
   at Microsoft.SqlServer.Management.TaskForms.SimpleWorkItem.Run()
===================================
Internal Error. The internal target platform type SqlAzureDatabaseSchemaProvider does not support schema file version '2.5'. (File: G:\Fbasic8-2014-2-2-12-10.bacpac) (Microsoft.Data.Tools.Schema.Sql)
Program Location:
   at Microsoft.Data.Tools.Schema.SchemaModel.DataSchemaModel.UpgradeSchema(ExtensionManager em, String originalSchemaVersion, XmlReader originalSchemaReader, String source)
   at Microsoft.Data.Tools.Schema.SchemaModel.DataSchemaModel.DeserializeXml(TextReader input, ErrorManager errors, String source, Action`3 constructorParametersSetter)
   at Microsoft.Data.Tools.Schema.SchemaModel.DataSchemaModel.DeserializePackage(SqlPackage package, ErrorManager errors, Action`3 constructorParametersSetter)
   at Microsoft.SqlServer.Dac.DacPackage.LoadModel(IPackageSource packageSource)
Jon Stroh

Hello,
Just as Mike post above, the issue may occurs as the previous SSDT releases are not compatible with this new version of DACFX.
You can refer to the following blog about this issue and download the latest release of SSDT from
here.
Reference:http://blogs.msdn.com/b/ssdt/archive/2012/10/10/ssdt-amp-dacfx-october-2012-compatibility-notes.aspx
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

NOKIA E90: UNABLE TO PERFORM BLUETOOTH OPERATION

Hi guys,
It's two weeks since, I'm having problems with my Nokia E90 mobile phone: when I try to activate my bluetooth, after a few seconds I receive the message "Unable to perform bluetooth operation", but this doesn't work in this way permanently because some times works and some times doesn't work, it occurs trying to connect to my vehicle free-hands device or even just activating bluetooth.
I can't understand what's happening because til now my bluetooth device worked fine.
So, could anybody help me? because now I'm working with my USB connection, but this is not very operative.
Thanks in advance!!!

01-Jun-2008 02:26 PM
erikpost wrote:
Exactly the same problem over here:
-FW 210.34.75 newly installed
-No paired devices listed
-Device is set visible
When trying to switch on Bluetooth, the error message above keeps appearing.
Reset to factory settings (using *#7370#) doesn't give any improvement.
In short: BT has become useless after the FW update.
Any suggestions to resolve this problem will be greatly appreciated.
Thanks in advance,
Erik
i heard the 210 sw is only a beta software and is for testing only... it could be causing you the problem...

Error: Windows Azure is currently performing an operation on this hosted service that requires exclusive access.

Similar Messages

Maybe you are looking for