Error Wire always in the background if crossing other wire

If you need to wire cross other wires it would be nice just for the optic to have the error wire always in the background of the cross. Now the wire which is connected first is in the background and all other overlay it.

Duplicate of http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Always-place-Error-Wires-underneath-other-wires/idi-p/2214142

Similar Messages

Read Error logs after running the background jobs

Hi,
How to read the error logs after running the background jobs. In our scenarion we are running the COHV transaction to release the production orders in background. But we are not finding the error logs after background job. We would like to read the error logs and correct for further processing.
Kindly suggest.
Thanks & Regards,
N. Laxman

Hi
you can check the back ground jobs defined by any user in SM37 and where you can see the spool and job logs as well.
plz check in your case and revert back
Regards
Anupam Sharma

I am running my first time machine backup onto a Western Digital MyBook Live. It is taking forever. Is there antivirus software running in the background or any other settings I need to change to speed it up? Also I am on a wireless network.

I am running my first time machine backup onto a Western Digital MyBook Live. It is taking forever. Is there antivirus software running in the background or any other settings I need to change to speed it up? Also I am on a wireless network.

The initial Time Machine backup can certainly take a long time over wireless. Days, possibly. It's impossible for anyone here to be able to predict how long it will take, and wireless environmental conditions can change at any time.
Is there antivirus software running in the background
Only you can determine that. If you're using third party AV software, anything is possible.
NAS devices may not be compatible with Time Machine, regardless of what their manufacturers may claim. Even after the Time Machine backup completes, your backup may be unreliable. You may not discover that until you need to rely upon the backup for some reason, and corruption can occur months or years from now.
Time Machine supports the following backup configurations:
A locally mounted volume
Time Capsule
A volume resident on a USB hard disk connected directly to a Time Capsule or current production AirPort Extreme Base Station.
That's it. Any configuration other than the above list places you in an experimental category. If your backup fails, you're on your own.

Started Applications in IE open always in the background

Hi,
using IE with OSGD 5.1, applications always start in the background. I do not have this issue with Firefox.
It seems to be an issue with IE not with OSGD. This behaviour is tested with IE 11/10/9/8 and SGD 5.1/5.0/4.71.
Is there any option/hidden option in IE I can use to make applications start in the foreground?
Thanks to all help in advance.

Hi,
AIR applications can't run inside the browser. For that you
need a Flex application.
Except for the AIR specific stuff (like native windows, file,
system tray, etc), other stuff will easily compile into a flex
application without change. Modularize your code so that there's a
common set of code that both your flex and AIR application uses and
then there's flex / air specific stuff.

I have a flash game I want to run in the background while surfing other tabs. When I change tabs the game automatically pauses. How can I stop this.

Is this a flash issue or can I force this game to run in the background somehow.

Does this also happen if you run that game in another window?
You can tear off a tab to a new window by slightly dragging the tab down in the browser area.

I set up firefox sync on two desktops; setting it up on a third fails with "unknown error" after I input the key. All other add-ons are disabled. What should I do?

I followed the same procedure in adding a device for the second and for the third. The second one worked, but not the third.
As far as I know, all software is up to date.

ok.. I tried this three times and kept getting that access denied thing when I clicked post my questions. So now maybe I wont have to typ this a fifth time....
I have a MAC computer with Sync. Was set up under sync Beta. I have an Android phone synced to it that was synced using the pair this device function. It works perfectly. I just got a new Android Tablet and am trying to add it to my sync and it does not seem to have the pair my device function. It insists I log into my sync account. So I try it and it tells me invalid userid/password. I verify and it is the exact email address userid that shows as being my sync account on the MAC. I verify the password on the MAC and it tests out fine. Try the tablet again and invalid.. So I try to reset my password on the tablet and am told my email address/account name does not exist. I just verified it AND Synced my MAC using it!! I have my recovery Key but there is no place to input it into the tablet. There is no place on tablet to enter the link device codes. How can my account be valid and in use on two devices but invalid and nonexistant on the new one? And How do I get the New one to sync with other two?

Is it possible that BAPI_PO_CHANGE generates no messages in the background?

Hello,
I want to use BAPI_PO_CHANGE to force a new agreements condition calculation. I run it in the background and in sm37, I have some messages.
When these messages are error messages (type E), the background job stops, and I don't want it to stop.
How can I do with this bapi to have no messages and only to deal with bapiret2 table?
Thanks in advance for any help.

HI
[Check the Link|http://abap.wikiprog.com/wiki/BAPI_PO_CHANGE]
[Commit|http://abap.wikiprog.com/wiki/BAPI_TRANSACTION_COMMIT]
[Roll Back|http://abap.wikiprog.com/wiki/BAPI_TRANSACTION_ROLLBACK]
Regards
Pavan

How do I change the background of a single cell or a row in a table?

How do I change the background of a single cell or a row in a
table? I doesn't seem to be letting me do that.

Are you using the latest DW? If so, then it isn't letting you
because
bgcolor is deprecated and shouldn't be used.
The correct way is to use css to define the background of a
cell
CSS:
.blackcell {background-color: black;}
HTML:
<td class="blackcell">whatever in the cell</td>
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Template Customization ~
http://www.csstemplates.com.au
Spry Widget Examples
http://www.dreamweaverresources.com/spry-widgets/
"dm25" <[email protected]> wrote in message
news:f4jr5h$luu$[email protected]..
> for some reason that doesn't always work. When I click
inside a cell, it
> doesn't give me an option to change the background
color.

Need some help regarding the backgrounds

I am new to adobe dreamweaver & I would like to ask some sort of a stupid question
When I save a website over the net, the folder always contains the background & the other images as small tiny images while when using Dreamweaver if I want to use a background image, I just load it.
My question is do they actually load the background image as small parts or the browser devides the image to smaller parts when saving the page?
Thanks for ur help & I hope some 1 gonna answer me soon enough.

If you (or someone else) use a repeating background image (128X128 for instance) the browser, per instructions from the HTML or CSS, will "tile" the same image over and over to create the background. This doesn't display multiple copies of the image, but references it over and over alongside and below itself until the page reaches it's end.
One exception to this is when there is a single large image (1024X768 for instance) used as a background, which usually doesn't repeat. In that case, if you were to download it, it would download as the one large image.
Another exception is if the image is cut into pieces and put back together in divs inside the page. Often this is done to create the illusion of an image in a layer above the page, unrestricted by the square dimensions of HTML layout.

How can I open links from mail in the background?

I receive a lot of digest emails with lots of links. I would like to be able to click all of the links in a given email, have Safari open those pages in the background, and then when I'm done selecting the links I can switch to Safari and read them all. It's a logical workflow for me: click all the links you want to read, THEN go read them.
But instead, every single time I click on a link it jumps to Safari, so I have to switch back to Mail, click on the next link (which again jumps to Safari), etc. NetNewsWire allows me to open all my links in the background so I can avoid all this switching back and forth--can Mail do the same thing?
Thanks in advance for any help ...
--Bill

You should be able to Command-click on the link in Mail and have it open in the background.
Mulder

How to change the background color of a cell based on other cell background

Hi,
Sorry if this is a basic question - I am new to XML. I want to create a table column, with no data in it. I then want to change the background color of the column based on the background color of other columns. I.E.
- If there are 3 or less cells in this row that are not green, color this cell green.
- If there are 4 or less cells in this row that are not green, and 3 or less are not red, color this cell yellow.
- If there are 4 or less cells in this row that are not green, and 3 or more are red, color this cell red.
If there are 5 or more cells in this row that are not green, color this cell red.
Many thanks for any assistance.

Okay - I have this resolved.
1. Create two variables (Yellow and Red):
<?xdoxslt:set_variable($_XDOCTX, 'Yellow', 0)?>
<?xdoxslt:set_variable($_XDOCTX, 'Red', 0)
2. For each cell, set the background based on their individual traffic light criteria, and update the associated color variable by 1. By default the backgrd color is set to Yellow so I only have to check for the lower and upper bounds:
<?choose:?>
<?when:number(CHECKED_IN)<=1?>
<?attribute@incontext:background-color;'Lime'?>
<?end when?>
<?when:number(CHECKED_IN)>3?>
<?attribute@incontext:background-color;'Red'?>
<?xdoxslt:set_variable($_XDOCTX, 'Red', xdoxslt:get_variable($_XDOCTX, 'Red') +1)?>
<?end when?>
<?otherwise?>
<?xdoxslt:set_variable($_XDOCTX, 'Yellow', xdoxslt:get_variable($_XDOCTX, 'Yellow') +1 )?>
<?end otherwise?>
<?end choose
3. I now want a cell that is Red if any of the cells in the row is red. Its yellow of there are 3 or more yellow cells in the row, and no reds. Otherwise its green. First, create an empty cell and make the default color green. Then add:
<?if: number(xdoxslt:get_variable($_XDOCTX,'Red')) > 0?>
<?attribute@incontext:background-color;'Red'?>
<?end if?>
<?if: number(xdoxslt:get_variable($_XDOCTX,'Yellow')) >= 3 and number(xdoxslt:get_variable($_XDOCTX,'Red')) = 0?>
<?attribute@incontext:background-color;'Yellow'?>
<?end if?>
4. Finally, reset the variables for the next row:
<?xdoxslt:set_variable($_XDOCTX, 'Yellow', 0)?>
<?xdoxslt:set_variable($_XDOCTX, 'Red', 0)

You have encountered an unexpected error. Please contact the System Adminis

Hii guys
EBS is installed.
I'm not able to login via IE in EBS and but i'm able to login EBS via FireFox.
I get the following error.
You have encountered an unexpected error. Please contact the System Administrator.
I've run the following query while logged in the system as apps user
SQL> select user_name from applsys.fnd_user where user_name = 'SYSADMIN;
and i get the following result
USER_NAME
SYSADMIN
What am i doing wrong .Kindly help
Fahad

Fahad,
This is a duplicate post, I suggest you check the other thread:
You have encountered an unexpected error. Please contact the System Adminis
Re: You have encountered an unexpected error. Please contact the System Adminis
Thanks

I downloaded Yosemite last night but when I tried to update iPhoto, I got an error message stating that that app and several others couldn't be updated because they weren't paid for by the user id entered. I'm the only one who uses this computer.

I downloaded Yosemite last night and tried to look at my photos in iPhoto and noticed that needed updating. When I tried to update as requested, I got an error message stating that the app (and several others including Pages and Numbers) couldn't be updated because they weren't purchased by the user ID I had entered. I'm the only user of the computer and now I can't find my photos anywhere! Any help would be appreciated.
Thanks

Some folks have solved this issue by dragging the apps to an external disk, then disconnecting it, and then are able to download. Apparently it can arise if you upgraded from an OS the than Mavericks.
Failing that: Contact App Store support. There's a link on the right hand side of the App Store Window. They're the only ones who can sort out account issues.

How do i change the background theme color in keynote for ios

Is there a way to change the background color theme in Keynote for iOS? Let's say I start with a Black or White theme, but I want it to be red, consistently on every slide. Is this possible?

The only option I have found is to create a rectangle and make it the size of the screen. Use the Tools to choose the colour you want and copy and paste it onto every slide. If you are starting with a blank slide, then tap the coloured rectangle and choose Lock to make sure it does not move. Then you can add anything you want in terms of photos, text, charts etc on top. If you have already created your slide, create the coloured rectangle on top of everything else and use the Arrange slider to send it to the back of all your pre-existing stuff on the screen. Hope this helps. Remember you can alter the opacity of your coloured rectangle too. I ave also played around with adding two coloured rectangles on top of each other and adjusting the opacity to get just the shade I want - a bit like mixing paint! You can group them together and then Lock them as the background. :)

The eraser tool and the background it produces?

1. Why does the eraser sometimes erase with white vs. the checkered background?
2. Does the checkerboard mean that the background will be fully transparent?
3. How do you switch between checkerboard and white backgrounds for the eraser?
Thanks in advance.

Erasing on a layer will produce transparency. Erasing on a flattened image will produce white (or the background color)

Error Wire always in the background if crossing other wire

Similar Messages

Maybe you are looking for