Error With 8.1 Windows Update

HelloI have recently updated the system with the windows automatic updates as well the 8.1OS, since then the system shuts down instantly or never starts even with a heavy force applied to the power button, sometimes it starts automatically and goes off in a while.It works fine, if switched back to the original factory condition. I have tried with online analysis and maintenance part and had reinstalled the drivers, but yet again the problem persists. Thanks in advance. Bijoy

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Similar Messages

Error code 80070103 during Windows Update

I have Windows Vista Home Premium installed as the OS in my T61p. Today, Windows Update showed the follwoing two updates available:
-- Update for Windows Live Sign-in Asistant (KB 967912) -- Important
-- Lenovo - Other hardware - ThinkPad PM Device -- Recommended
The first one (Windows Live Sign-in Assistant) installed with no problems.
The second one (ThinkPad PM Device) failed installation and the following error message was provided:
Code 80070103 -- Windows Update encountered an unknown error.
It amazes me that Microsoft offers a specific update to my system and then, when it fails installation, all it can provide is a message about an unknown error...
After some research, it is still Microsoft itself that suggests I contact the hardware manufacturer for further assistance...
I am not aware of any problem with my system, so I'm tempted to just discard the update.
But, out of curiosity, I wonder what those PM initials (as in ThinkPad PM Device) stand for and also whether anyone has ever encountered this same problem and/or can provide any insights into the real meaning of the error message.
Thanks in advance for any feedback.

homerhat,
I migrated to Windows 7 last December, a few weeks after I posted my cry for help... And I must say that one of the reasons I did it was that I was experiencing too many issues with Vista, especially with several WIndows updates that were just refusing to install. I tried everything, including on this forum and on Microsoft's forum, but no answers whatsoever were being received.
In one instance, a good soul accompanied my plight with a number of messages with as many suggestions, but nothing worked. I was getting really frustrated.
After moving to Windows 7, though, (I cross my fingers...) I did not encounter any situation of failed updates, so far.
But I think it was a great thing for you to post your experience even after you had resolved your issue. It may benefit someone along the road ant this, I think, is what these forums are all about.
This said, there are more responsive and less responsive forums and this Lenovo Community Forum, in my humble opinion, has known better times than in recent months. This is just my sincere opinion, based on my personal observation. I may be (and I wish I am) wrong.
Cheers!

Errors Installing 2 Specific Windows Updates.

Hello All,
My Windows Update client continuously fails to install these 2 security updates for:
KB2864058 and KB2862335. Checking the Update history each update has a different error code, so they're both not failing for the same reason, apparently...
Here are the "Details" from the Update History window, for each of those updates listed above:
KB2862335:
Security Update for Windows 7 (KB2862335)
Installation date: ‎1/‎7/‎2015 12:18 PM
Installation status: Failed
Error details: Code 80070002
Update type: Important
A security issue has been identified in a Microsoft software product that could affect your system. You can help protect your system by installing this update from Microsoft. For a complete listing of the issues that are included in this
update, see the associated Microsoft Knowledge Base article. After you install this update, you may have to restart your system.
KB2864058:
Security Update for Windows 7 (KB2864058)
Installation date: ‎1/‎7/‎2015 12:18 PM
Installation status: Failed
Error details: Code 80073712
Update type: Important
A security issue has been identified in a Microsoft software product that could affect your system. You can help protect your system by installing this update from Microsoft. For a complete listing of the issues that are included in this
update, see the associated Microsoft Knowledge Base article. After you install this update, you may have to restart your system.
I checked the CBS.log file and I see lots of stuff about these 2 updates, but there is no option to attach anything other then an image file... Is there any way of uploading that file?
I looked up the error codes and found out the following:
0x80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT --- The component store is in an inconsistent state.
0x80070002 - ERROR_FILE_NOT_FOUND --- The system cannot find the file specified.
But other then that, I'm not sure what else to do...
If anyone has any help or suggestions for me, that would be greatly appreciated!
Thanks in Advance,
Matt
Matt

Lines from CBS.log:
2015-01-08 13:10:10, Info CSI 0000032e Performing 2 operations; 2 are not lock/unlock and follow:
Install (5): flags: 0 tlc: [44bcf3fd2b5bb455d5f5dcc838f3563d, Version = 6.1.7601.18201, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey
neutral]) ref: ( flgs: 00000000 guid: {d16d444c-56d8-11d5-882d-0080c847b195} name: [l:150{75}]"Package_2_for_KB2864058~31bf3856ad364e35~x86~~6.1.1.1.2864058-4_neutral_GDR" ncdata: [l:2{1}]"2") thumbprint: (null)
Install (5): flags: 0 tlc: [65bcba98d96dd4e3ec1665a97deef610, Version = 5.82.7601.18201, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:6595b64144ccf1df}, Type neutral, TypeName neutral, PublicKey
neutral]) ref: ( flgs: 00000000 guid: {d16d444c-56d8-11d5-882d-0080c847b195} name: [l:150{75}]"Package_2_for_KB2864058~31bf3856ad364e35~x86~~6.1.1.1.2864058-6_neutral_GDR" ncdata: [l:2{1}]"2") thumbprint: (null)
2015-01-08 13:10:10, Info CSI 0000032f Component change list: { 6.1.7601.17514 -> 6.1.7601.18201 Microsoft-Windows-Shell-Comctl32-v5, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35},
Type neutral, TypeName neutral, PublicKey neutral }
{ (null) -> 6.1.7601.18201 44bcf3fd2b5bb455d5f5dcc838f3563d, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral }
{ 5.82.7601.17514 -> 5.82.7601.18201 Microsoft.Windows.Common-Controls, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:6595b64144ccf1df}, Type = [l:10{5}]"win32", TypeName neutral, PublicKey
neutral }
{ (null) -> 5.82.7601.18201 65bcba98d96dd4e3ec1665a97deef610, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:6595b64144ccf1df}, Type neutral, TypeName neutral, PublicKey neutral }
2015-01-08 13:10:10, Error CSI 00000330@2015/1/8:18:10:10.221 (F) d:\win7sp1_gdr\base\wcp\primitiveinstallers\fileinstaller.cpp(1482): Store corruption detected in function CFileInstaller::ChangeFileCompression expression: 0
MissingFileSystemResource on resource [114]"\winsxs\x86_microsoft-windows-shell-comctl32-v5_31bf3856ad364e35_6.1.7601.18201_none_3bab3b80363456bb\comctl32.dll"[gle=0x80004005]
2015-01-08 13:10:10, Error CSI 00000331@2015/1/8:18:10:10.502 (F) d:\win7sp1_gdr\base\wcp\primitiveinstallers\fileinstaller.cpp(1482): Store corruption detected in function CFileInstaller::ChangeFileCompression expression: 0
MissingFileSystemResource on resource [113]"\winsxs\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.7601.18201_none_ec80f00e8593ece5\comctl32.dll"[gle=0x80004005]
2015-01-08 13:10:10, Error CSI 00000332@2015/1/8:18:10:10.643 (F) d:\win7sp1_gdr\base\wcp\primitiveinstallers\filehierarchy.cpp(1279): Store corruption detected in function FileInstaller::CFileInstallerHierarchy::CommitFileChanges expression: 0
MissingFileSystemResource on resource [114]"\winsxs\x86_microsoft-windows-shell-comctl32-v5_31bf3856ad364e35_6.1.7601.18201_none_3bab3b80363456bb\comctl32.dll"[gle=0x80004005]
2015-01-08 13:10:11, Error CSI 00000333 (F) STATUS_SXS_COMPONENT_STORE_CORRUPT #1347511# from CFileInstaller::CommitChanges(...)[gle=0xd015001a]
2015-01-08 13:10:11, Error CSI 00000334 (F) STATUS_SXS_COMPONENT_STORE_CORRUPT #1347510# from PrimitiveInstaller::CCoordinator::FinalizeChanges(...)[gle=0xd015001a]
2015-01-08 13:10:11, Error CSI 00000335 (F) STATUS_SXS_COMPONENT_STORE_CORRUPT #1345855# from CCSDirectTransaction::PerformChangeAnalysis(...)[gle=0xd015001a]
2015-01-08 13:10:11, Error CSI 00000336 (F) STATUS_SXS_COMPONENT_STORE_CORRUPT #1345854# from CCSDirectTransaction::PrepareForCommit(...)[gle=0xd015001a]
2015-01-08 13:10:11, Error CSI 00000337 (F) STATUS_SXS_COMPONENT_STORE_CORRUPT #1345853# from CCSDirectTransaction::ExamineTransaction(...)[gle=0xd015001a]
2015-01-08 13:10:11, Error CSI 00000338 (F) STATUS_SXS_COMPONENT_STORE_CORRUPT #1345852# from CCSDirectTransaction_IRtlTransaction::ExamineTransaction(...)[gle=0xd015001a]
2015-01-08 13:10:11, Error CSI 00000339@2015/1/8:18:10:11.142 (F) d:\win7sp1_gdr\base\wcp\primitiveinstallers\fileinstaller.cpp(1482): Store corruption detected in function CFileInstaller::ChangeFileCompression expression: 0
MissingFileSystemResource on resource [114]"\winsxs\x86_microsoft-windows-shell-comctl32-v5_31bf3856ad364e35_6.1.7601.18201_none_3bab3b80363456bb\comctl32.dll"[gle=0x80004005]
2015-01-08 13:10:11, Error CSI 0000033a@2015/1/8:18:10:11.501 (F) d:\win7sp1_gdr\base\wcp\primitiveinstallers\fileinstaller.cpp(1482): Store corruption detected in function CFileInstaller::ChangeFileCompression expression: 0
MissingFileSystemResource on resource [113]"\winsxs\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.7601.18201_none_ec80f00e8593ece5\comctl32.dll"[gle=0x80004005]
2015-01-08 13:10:11, Error CSI 0000033b@2015/1/8:18:10:11.657 (F) d:\win7sp1_gdr\base\wcp\primitiveinstallers\filehierarchy.cpp(1279): Store corruption detected in function FileInstaller::CFileInstallerHierarchy::CommitFileChanges expression: 0
MissingFileSystemResource on resource [114]"\winsxs\x86_microsoft-windows-shell-comctl32-v5_31bf3856ad364e35_6.1.7601.18201_none_3bab3b80363456bb\comctl32.dll"[gle=0x80004005]
2015-01-08 13:10:11, Error CSI 0000033c (F) STATUS_SXS_COMPONENT_STORE_CORRUPT #1348153# from CFileInstaller::CommitChanges(...)[gle=0xd015001a]
2015-01-08 13:10:11, Error CSI 0000033d (F) STATUS_SXS_COMPONENT_STORE_CORRUPT #1348152# from PrimitiveInstaller::CCoordinator::FinalizeChanges(...)[gle=0xd015001a]
2015-01-08 13:10:11, Error CSI 0000033e (F) STATUS_SXS_COMPONENT_STORE_CORRUPT #1347719# from CCSDirectTransaction::PerformChangeAnalysis(...)[gle=0xd015001a]
2015-01-08 13:10:11, Error CSI 0000033f (F) STATUS_SXS_COMPONENT_STORE_CORRUPT #1347718# from CCSDirectTransaction::PrepareForCommit(...)[gle=0xd015001a]
2015-01-08 13:10:11, Error CSI 00000340 (F) STATUS_SXS_COMPONENT_STORE_CORRUPT #1347717# from CCSDirectTransaction::GenerateComponentChangeList(...)[gle=0xd015001a]
2015-01-08 13:10:11, Error CSI 00000341 (F) STATUS_SXS_COMPONENT_STORE_CORRUPT #1347716# from Windows::COM::CPendingTransaction::ExtractInformationFromRtlTransaction(...)[gle=0xd015001a]
2015-01-08 13:10:11, Error CSI 00000342 (F) HRESULT_FROM_WIN32(14098) #1345644# from Windows::COM::CPendingTransaction::IStorePendingTransaction_Analyze(...)[gle=0x80073712]
2015-01-08 13:10:11, Error CSI 00000343 (F) HRESULT_FROM_WIN32(14098) #1345370# from Windows::ServicingAPI::CCSITransaction::ICSITransaction_Commit(Flags = 102 (0x00000066), pSink = NULL, disp = 0, coldpatching = FALSE)[gle=0x80073712]
2015-01-08 13:10:11, Error CSI 00000344 (F) HRESULT_FROM_WIN32(14098) #1345369# 1583036 us from Windows::ServicingAPI::CCSITransaction_ICSITransaction::Commit(flags = 0x00000066, pSink = NULL, disp = 0)
[gle=0x80073712]
2015-01-08 13:10:11, Info CBS Setting ExecuteState key to: ExecuteStateNone
2015-01-08 13:10:11, Info CBS Setting RollbackFailed flag to 0
2015-01-08 13:10:11, Info CBS Clearing HangDetect value
2015-01-08 13:10:11, Info CBS Saved last global progress. Current: 0, Limit: 1, ExecuteState: ExecuteStateNone
2015-01-08 13:10:11, Error CBS Exec: Failed to commit CSI transaction to execute changes. [HRESULT = 0x80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT]
2015-01-08 13:10:11, Info CSI 00000345@2015/1/8:18:10:11.735 CSI Transaction @0x48a3dc0 destroyed
2015-01-08 13:10:11, Info CBS Perf: InstallUninstallChain complete.
2015-01-08 13:10:11, Info CBS Failed to execute execution chain. [HRESULT = 0x80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT]
2015-01-08 13:10:11, Error CBS Failed to process single phase execution. [HRESULT = 0x80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT]
2015-01-08 13:10:11, Info CBS WER: Generating failure report for package: Package_for_KB2864058~31bf3856ad364e35~x86~~6.1.1.1, status: 0x80073712, failure source: Execute, start state: Staged, target state: Installed, client id: WindowsUpdateAgent
2015-01-08 13:10:11, Info CBS Failed to query DisableWerReporting flag. Assuming not set... [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2015-01-08 13:10:11, Info CBS Failed to add %windir%\winsxs\pending.xml to WER report because it is missing. Continuing without it...
2015-01-08 13:10:11, Info CBS Failed to add %windir%\winsxs\pending.xml.bad to WER report because it is missing. Continuing without it...
2015-01-08 13:10:12, Info CBS Reboot mark refs: 0
Does that help figure out what's going on here?
Thanks in Advance,
Matt
Matt

Download error with CC programs/apps updates. Solutions?

I am getting a download error when I try to update my CC programs/apps. Solutions?

WHAT error?
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Error with premiere and windows 8.1

I have recently update my PC system to windows 8.1. I reinstalled Premiere 7.0 and now I can't make it work. It crushes when I try to create a new project and the program send a massage saying that there was an error and the program will close to try a solution and will let me know.
I already try disabling antivirus and firewall.
Any suggestion??

Yes, instead of posting in a forum dedicated to type, post in a forum associated with Premiere.
I will move your post for you.
- Dov

I/O errors with certain discs- Windows w/Boot Camp Please help.

I wasn't sure which forum to post this problem in. It fits in a few categories, so I apologize if I've gotten it wrong.
I tried to install a game (Last Half of Darkness, 2005) yesterday, and with about 1/3 of installation complete, I got this message: An error occurred while trying to copy a file: I/O error 23. I had my choice of abort, retry or ignore. After the 1st error message I chose retry. After a bit more of the installation I got another error message: I/O 1117. I then tried to ignore, that didn't work, so I aborted. I tried to install a second time, and even tried a second copy of the same game, then tried to install the 2007 sequel to Last Half, same error messages. After each attempt at installation, I could not get the drive to eject the disc. I eventually did by restarting in OSX. My iMac is 13 months old. In November I had a similar problem with another game, this one from about 2004. In that case, the game installed, but froze a few minutes into playing. Because I couldn't play, and couldn't eject, without a great deal of time and "spinning" noise, I took the computer to the Apple Store to have them look at it. I figured that if it was 2 months from being out of warranty, I should get it fixed right then. Of course all the messing with it they did showed no drive problems. All other CD or DVDs, either commercial or homemade, music, video or games have installed and run just fine.
An internet search found this: http://support.microsoft.com/kb/891894 I did everything except the clean boot install, and contacting the manufacturer. After changing the transfer mode per these instructions, I could get all of 2/3 of the way through installation before the error messages popped up.
All drivers are up-to-date according to Windows automatic update and Apple update.
This is my 4th Mac, so I have little experience with PC/Windows. Can anyone give me a suggestion as to what I can do to install and play these games? Any help greatly appreciated.
Ruth

Hi Ruth,
I sure don't know what the issue is however you might want to go to the Bootcamp forum and post it, maybe someone knows there.
http://discussions.apple.com/category.jspa?categoryID=237
Regards,
Roger

[Solved] errors with keys after pacman update?

Hi,
I installed pacman 4.0.1-4, but now this is what happens when I try and update.
Proceed with installation? [Y/n] Y
(28/28) checking package integrity [######################] 100%
error: binutils-multilib: signature from "Jan Alexander Steffens (heftig) <[email protected]>" is unknown trust
error: libcap-ng: signature from "Ionut Biru <[email protected]>" is unknown trust
error: cifs-utils: signature from "Tobias Powalowski <[email protected]>" is unknown trust
error: cmake: signature from "Dave Reisner <[email protected]>" is unknown trust
error: colord: signature from "Ionut Biru <[email protected]>" is unknown trust
error: lib32-glibc: signature from "Jan Alexander Steffens (heftig) <[email protected]>" is unknown trust
error: lib32-gcc-libs: signature from "Jan Alexander Steffens (heftig) <[email protected]>" is unknown trust
error: gcc-libs-multilib: signature from "Jan Alexander Steffens (heftig) <[email protected]>" is unknown trust
error: gcc-multilib: signature from "Jan Alexander Steffens (heftig) <[email protected]>" is unknown trust
error: perl: key "6D1655C14CE1C13E" is unknown
error: key "6D1655C14CE1C13E" could not be looked up remotely
error: openssl: signature from "Pierre Schmitz <[email protected]>" is unknown trust
error: git: signature from "Dan McGee <[email protected]>" is unknown trust
error: gpgme: signature from "Dave Reisner <[email protected]>" is unknown trust
error: gvfs: signature from "Dave Reisner <[email protected]>" is unknown trust
error: inetutils: key "FCF2CB179205AC90" is unknown
:: Import PGP key 9205AC90, "Eric Belanger <[email protected]>", created 2011-04-19? [Y/n] Y
error: key "Eric Belanger <[email protected]>" could not be imported
error: intltool: key "FCF2CB179205AC90" is unknown
:: Import PGP key 9205AC90, "Eric Belanger <[email protected]>", created 2011-04-19? [Y/n] ^C
Interrupt signal received
When pacman updated it suggested that I run this command,
sudo pacman-key --init
I know that usually I would say yes to a key and pacman should remember it, but what are all the errors?
Last edited by mich04 (2012-01-20 17:19:26)

# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl -C - -f %u > %o
#CleanMethod = KeepInstalled
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
#CheckSpace
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
#Include = /etc/pacman.d/mirrorlist
[core]
Include = /etc/pacman.d/mirrorlist
[extra]
Include = /etc/pacman.d/mirrorlist
#[community-testing]
#Include = /etc/pacman.d/mirrorlist
[community]
Include = /etc/pacman.d/mirrorlist
# If you want to run 32 bit applications on your x86_64 system,
# enable the multilib repositories as required here.
#[multilib-testing]
#Include = /etc/pacman.d/mirrorlist
[multilib]
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
Here it is.

Mail delivery error with 5510 e-print. updates and connection are ok. friend has same problem.

I have checked all of the updates and connections for my new printer. As far as I can tell, I've checked everything that needs to be checked and all is good. But, I still get the Mail Delivery error when e-printing. And my friend has the same problem with her new 5510 b111a. What could possibly be the problem? Regular printing, scanning and so on work fine with my wireless connection.
This question was solved.
View Solution.

So it sounds like it may be an Issue with the provided Email Address from your internet service provider, you are sending from ,
What i would suggest as a test is to create a Email account either with g mail and or yahoo, and try to send the email to your eprint account/Email, and see if it accepts the email also, make sure you have your printer set to Accept email from all users you can do this by logging into Eprint Center and then going into these settings and selecting that option
I am an HP employee.
__ if this Solution has helped Please Mark as Resolved and feel free to Provide a Kudos__

Installation Error with DB2 on windows Server 2003 R2

Hi Experts,
We are installing ERP 6.0 on DB2 (DBUDB 9.7) Fresh Installation.
While Installing ERP 6.0 (ECC6.0 SR3) we are facing an error attached. Can you please suggest us to move Forward.
Details :
OS : Windows Server 2003 R2
DB2 : DBUDB 9.7
Thanks in Advance...
Regards,
Krishna.M

Hi Krishna,
Please check SAP PAM whether db2 9.7 is supported on Windows 2003 R2.
www.service.sap.com/PAM.
If not, then choose the database version which is supported for Windows 2003 R2.
You may try with db2 9.1 or 9.5 .
Regards,
Deepak Kori

Error Code 80073712 after Windows update.

I have yet another error code when Windows issued yet another automatic update. This time it is #80073712.
I have gotten so many of these now, as Windows automatic updates download but fail to install. Might this be because I am using Mozilla Firefox for my browser?
PLEASE....I've had dozens of updates fail to install, and I keep getting more and more different error code numbers. Will there ever be any help on any of them?????
Moderator note: OS added to subject line for clarity.
Message Edited by Agotthelf on 02-07-2009 08:38 AM

Try using the system update readiness tool.More information here
Download for windows vista
Hope this helps
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Strange errors with pop up windows

Hi folks,
I recently had my PC re-imaged. After that when ever I try to click on any link that should result in a pop-up window nothing happens. The system locks up for about 20-30 seconds and then comes back with no result.
I already checked and turned off the pop-up blocker (and oddly enough the logoff function works and other pop-up (non portal) applications work just fine). All other links work, but any link (such as the Personalize) that should result in a pop-up fails.
In some cases I get a JavaScript error that reads...
Line 176 char 1 no such interface supported
com.sap.portal.runtime.system.console.Go
In other cases I don't get any error message at all.
One of my fellow coder's machine continues to work just fine. Pop-ups work without a problem. Our basis folks are at a loss.
Does anyone have any ideas?
Thanks in advance!
-Jon

Thank you Ulli,
That OSS note is most useful. However, it turned out that we had a much more serious issue. The image our basis group was using for our workstations is messed up. Microsoft Article 281679 or Q281679 gives a much better explanation. The short answer was that some of the IE DLLs were corrupt and need to be reinstalled.
Regards, Jon

Sync - "disconnected" error with Torch 9800 & Windows 8

I have a Torch 9800 and Microsoft Surface Pro with Windows 8. I have installed Desktop Manager three times and it will sync with my BB only once. I have activated .NET 3.5 in Windows, changed USB cables, ensured my BB battery is charged. What should I do to resolve this issue?

Hi jvanhalst,
Welcome to the BlackBerry Support Community.
Can you provide more information on this issue please?
What exactly happens when you try to synchronize?
Is this happening when syncing organizer data only, or media files also?
What is the full error message you receive?
Are you able to sucessfully connect with the BlackBerry Desktop Software to backup or use any of the other functions?
I look forward to your response.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

SAP oracle Installation error with Oracle on windows 2008 MSCS

Dear All,
I'm facing an error during SAP cluster group creation.
As per SAPinst steps, During configuration of Frist node its giving error at Cluster group creation.
please find the Log :-
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WARNING 2010-06-17 00:04:39.138
Execution of the command "cluster.exe RESOURCE "SAP OPE 51 Service"" finished with return code 5007. Output:
Listing status for resource 'SAP OPE 51 Service':
Resource Group Node Status
System error 5007 has occurred (0x0000138f).
The cluster resource could not be found.
INFO 2010-06-17 00:04:39.138
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAPJAVA\MSCS-A\cluster.exe.log.
INFO 2010-06-17 00:04:39.153
Output of cluster.exe res "SAP OPE 51 Service" /OFFLINE is written to the logfile cluster.exe.log.
WARNING 2010-06-17 00:04:39.200
Execution of the command "cluster.exe res "SAP OPE 51 Service" /OFFLINE" finished with return code 5007. Output:
System error 5007 has occurred (0x0000138f).
The cluster resource could not be found.
INFO 2010-06-17 00:04:39.216
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAPJAVA\MSCS-A\cluster.exe.log.
WARNING 2010-06-17 00:04:39.231
Execution of the command "cluster.exe res "SAP OPE 51 Instance" /REMOVEDEP: "SAP OPE 51 Service"" finished with return code 5007. Output:
System error 5007 has occurred (0x0000138f).
The cluster resource could not be found.
ERROR 2010-06-17 00:04:39.340
MOS-01242 Windos System error message number: '5013'. Message: 'The cluster group could not be found.'.
WARNING[E] 2010-06-17 00:04:39.356
MUT-03025 Caught ESAPinstException in Modulecall: Windos System error message number: '5013'. Message: 'The cluster group could not be found.'. .
ERROR 2010-06-17 00:04:39.356
FCO-00011 The step CreateFirstSAPGenericServiceResource with step key |MSCS_A|windows|ind|ind|ind|0|0|CreateSAPClusterGroup|windows|ind|ind|ind|11|0|CreateFirstSAPGenericServiceResource was executed with status ERROR ( Last error reported by the step :Windos System error message number: '5013'. Message: 'The cluster group could not be found.'.).
ERROR 2010-06-17 00:04:56.64
FCO-00011 The step CreateFirstSAPGenericServiceResource with step key |MSCS_A|windows|ind|ind|ind|0|0|CreateSAPClusterGroup|windows|ind|ind|ind|11|0|CreateFirstSAPGenericServiceResource was executed with status ERROR ( Last error reported by the step :Windos System error message number: '5013'. Message: 'The cluster group could not be found.'.).
Note:-
entry in net_helpmsg.exe
The cluster group could not be found.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Actually, before starting SAPinst, i had created SAP<SAPSID> service & Application.
i.e.. by creating Empty service and application followed by renaming it to SAP<sapsid> and allocating shared disk and bringing it onlie with file server configuration with in it.
But, i'm facing the error during configuration of First node.
Done with ASCS and SCS .. selecting the correct drive where /usr/sap installed.
i request you to suggest me a solution to fix this problem during installation.
Thanking you in all,
Best regards,
Raghav.

r3Clus.log
17.6.2010, 14:0:53, ntclsapclus.cpp, 213, Entry: InstallSAPResourceType
17.6.2010, 14:0:53, ntclsclinst.cpp, 58, Entry: Sclinstsrct::Create
17.6.2010, 14:0:53, ntclsclinst.cpp, 79, CreateClusterResourceType RC= 183
Cannot create a file when that file already exists.
17.6.2010, 14:0:53, ntclsclinst.cpp, 91, DllRegisterCluAdminExtension RC= 0
17.6.2010, 14:0:53, ntclsclinst.cpp, 102, DllRegisterServer RC= 0
17.6.2010, 14:0:53, ntclsclinst.cpp, 116, Exit: Sclinstsrct::Create RC= 0
17.6.2010, 14:0:53, ntclsapclus.cpp, 215, Exit: InstallSAPResourceType RC= 0

Dreamweaver MX 2004 error with tables in Windows 7

I did a full install of MX 2004 on my Windows 7 PC however everytime I go to add a new table, MX gives me an error message and it won't allow me to add the new table or do anything for that matter. I had to re-install DW 4 to design my sites in the meantime.
Any suggestions?
Thanks,
Anthony

Yes- it fixes a ton of bugs in MX2004
https://www.adobe.com/support/dreamweaver/downloads_updaters.html#dwmx2004
Here's list of what it fixes:
http://kb2.adobe.com/cps/193/tn_19368.html

Excelreportdemo project link error with CVI2010 on windows 7, 64-bit operating system

I am trying to run the excelreportdemo project in CVI2010 on windows 7, 64-bit operating system. I have the Excel2013 installed as well. I have chosen the build configuration as release or debug for 32 bit system so to be compatible for the test platform for production.
However, I get 12 Project link errors as following:
Undefined symbol '_ExcelRpt_RangeBorder@24' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_WriteDataFromTableControl@16' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_SetCellValue' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_SetCellRangeAttribute' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_ChartAddtoWorksheet@40' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_ChartWizard@52' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_SetChartAttribute' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_WorkbookNew@8' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_ApplicationNew@8' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_ApplicationQuit@4' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_WorkbookClose@8' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_WorksheetNew@12' referenced in "excelreportdemo.c".
I have found a previous dicussion back in 2007. Unfortunately it did not help for the same problem on my new machine and CVI2010. Could anyone give me help on this/
Thanks!
Yuwei
Solved!
Go to Solution.

The previous discussion link is pasted below:
http://forums.ni.com/t5/LabWindows-CVI/Problems-adding-the-activex-instrument-experiencing-undefined/m-p/580608/highlight/true#M31390
It did not solve my problem, but may spark your idea of helping me.
Thanks a lot!
Yuwei

Error With 8.1 Windows Update

Similar Messages

Maybe you are looking for