Error with a copy function after upgrading to patch 18 on the server

Hi experts,
I had the following error when I try to execute with trace in RSPLAN a copy function that was right and functioning over a workbook before upgrading to patch 18 in the server:
'Char. value of 0COSTELMNT  does not correspond to value of block char. 623004'
The functions seems to be right also when I check the values but the error message is still there and over the workbook Copy function button.
Thanks,
Diego

Technically, Oracle supports Oracle XE through that forum. At least that was the policy as I knew it a while ago.
With installation issues for XE and the like it's probably better to just post it there. Obviously a grey area and you may well get a hit or two here, but I think you should post these kinds of questions on the XE forum.
When it comes to Apex development questions you can definitely post them here. I know, I know, it really is a pain! But you want to post where you have the best chance of getting good help.
Earl

Similar Messages

  • I dont have any Add-ons with my FireFox. After upgrade to the latest version 26.0 I'm keep getting Script error "chrome://global/content/binding/popup.xml:580"

    Quite frequently I'm keep getting the error like "Script is not responding....I dont have any Add-ons with my FireFox. After upgrade to the latest version 26.0 I'm keep getting Script error "chrome://global/content/binding/popup.xml:580" Stop or Continue Script.
    Currently I don't have any Add-Ons installed in my FireFox, so I can suspect any Add-ons.
    I'm facing this issue only after the upgrade to 26.0 recently.

    Ifound this article:
    https://support.mozilla.org/pt-BR/questions/746499
    in this article the problem is similar not the same, but sdmitch16 had a intersting idea disable the chrome options
    and i search more in the internet i also found this:
    https://support.mozilla.org/pt-BR/questions/760704

  • Problems with your HP printer after upgrading to Windows 8.1

    If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
    www.hp.com/go/tools.
    I was an HP employee
    If I have helped you solve your issue please mark it as solved
    **Say Thanks By Clicking on the Kudos Star**

    Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions  work just fine.
          I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

  • After upgrading iTunes, I get the error, missing msvcr80.dll, How do I resolve this issue?

    I am using Vista 32 bit on an older dell laptop and have been using iTunes for a long time, downloading songs, syncing with my iPhone, and etc, with no problems.  After upgrading to the newest version of iTunes 11, I received an error message of "missing MSVCR80.dll, please reinstall the software" when trying to start the iTunes application.  I removed the iTunes software and associated apps from my laptop and reinstalled the iTunes software.  While the software was installing it indicated that I did not have permission to install the application.  Although I started the installation with the option of "Run as Admistrator".  Since I could not reinstall the iTunes software, I choose a restore point where my iTunes was working before, and changed to that point.  I am still getting "MSVCR80.dll missing".  Does anyone know how I can restore the missing MSVCR80.dll?  I have found articles on the web of how to do this, but none seem to work.
    Thanks

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Tpnotify with TPACK flag hangs after upgrading to Tuxedo 12c RP020

    Hi,
    We are experiencing issues with tptonify with TPACK flag set after upgrading to Tuxedo 12c. Looks like tpnotify is not returned or reporting errors. Is there anything to do with "009. Bug16506218 - TPNOTIFY WITH TPACK FLAG THROW OUT EXCEPTION"? Is there any documentation about the new flag TPACK_INTL?
    Thanks

    Hello,
    If all you have done is upgrade to Tuxedo12 the behavior should be the same. The TPACK flag definition is:
    "The request is sent and the caller blocks until an acknowledgement message is received from the target client"
    Is there any additional change(e.g. in your client) you have made?
    What Tuxedo version are you upgrading from?
    The bug 16506218 fix was for a jolt client exception and a JSH failure.
    Do you see an error or is the process which executes tpnotify() just hanging/blocking waiting for the ack message?
    The flag that you mention is actually an undocumented customer requested enhancement that went into Tuxedo 10.3.
    Are you using it? Using it changes the tpnotify() behavior dependent upon the client status.
    Regards,
    Bob Finan

  • Impossible Upload files with Filezilla FTP Client after upgrade win8 to win8.1

    Hi
    Things were working fine with win 8 but, after Upgrade to win 8.1 is not possible upload files with Filezilla  FTP Client.
    is there anyone facing same problem?
    thanks in advance for any answer to help me solve this issue 
    Regards 
    TC

    Hi,
    Please Change your transfer settings in site manager from either default or passive to active it to see what's going on.
    Also, check IE compatibility mode.
    In addition, I suggest you install all latest updates for Windows since these updates will improve and fix some known issues.
    Kate Li
    TechNet Community Support

  • Strange problem with my ipod 2g after upgrade to os 4.2

    Strange problem with my ipod 2g after upgrade to os 4.2
    the problem with volume some times when i switch on the ipod i hear the sound
    alarm rings it's work too i can hear it .. but the problem i cant hear anything else as yourtube or music i cant hear buttons sound when i typing
    i hope i get help

    I would try in order:
    - Reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backu via iTunes.
    - Restore the iPod to factory defaults/new iPod.

  • Cannon MP830 can't use the scanner function after upgrading to Mavericks.

    I have an Cannon MP830 and now I can't use the scanner function after upgrading to Mavericks.  Can someone help?

    There is no ICA driver for this model so you won't be able to use Image Capture or Preview. But there is a TWAIN scanner driver and the supporting MP Navigator application available for 10.8 from Canon, so you could try installing these and see if you can scan again.

  • HI! I am using iTunes with Windows 7 64bit.after upgrading itunes  to 10.5.2.11 it opens only once. If i close it, then it will not open again.the only way to open itunes is by disabling the APSDaemon.exe from the task manager.please help!

    HI! I am using iTunes with Windows 7 64bit.after upgrading itunes  to 10.5.2.11 it opens only once. If i close it, then it will not open again.the only way to open itunes is by disabling the APSDaemon.exe from the task manager.please help!

    Refer this article to reset Winsock to it's default.  Your PCTools may have inserted LSP.
    http://support.apple.com/kb/TS4123?viewlocale=en_US
    After reset and restarting windows, you may get a prompt to remap LSP, click no.

  • After upgrading to mountain lion, the movies I create using iDVD periodically stop then resume abruptly when I play them back on my DVD player. Any ideas on correcting this?

    After upgrading to mountain lion, the movies/slideshows I create using iDVD playback in a jolting start/stop manner. This didn't happen with the prior os - playbacks were flawless. Any ideas, short of uninstalling mountain lion, on how to correct?

    I know this is not much help. IDVD and Mountain Lion are working perfectly for me.  I know many others that use Mountain Lion with iDVD also.
    I think your problem lies elsewhere.

  • After upgrading to lion my web server won't run

    after upgrading to lion my web server won't run

    From System Prefs clicking on Web Shareing wont start.
    From the terminal attempting to run httpd gives me:
    iBookWiz:~ steve$ sudo httpd
    httpd: Syntax error on line 117 of /private/etc/apache2/httpd.conf: Cannot load /usr/libexec/apache2/mod_fastcgi.so into server: dlopen(/usr/libexec/apache2/mod_fastcgi.so, 10): image not found

  • After upgrading to IOS 5, the edit button doesn't appear in the CONTACTS

    After upgrading to IOS 5, the edit button doesn't appear in the CONTACTS. Any idea, why?

    If you have a gmail, yahoo, or even icloud etc. account go into settings>mail, contacts and make sure you're not syncing through yahoo for example.. Turn that off, if that still doesn't work delete the yahoo account and simply set up the account again..will add the + & edit functions again..

  • Trying to send e-mail and error message " a copy has been placed in your outbox. the sender address was rejected by the server"

    trying to send e-mail and error message " a copy has been placed in your outbox. the sender address was rejected by the server"

    i have the same problem with my 3gs and tried to add my email acc+pass in the outgoing server but it got rejected.
    just bin on the phone(45min) with my carrier support about this issue they are pretty much scratching there head, the settings i should use gets verified with no problems when i add the outgoung server, but still cant send mails.

  • After upgrading my iPhone4 to the latest IO it no longer connects to wifi, how do you fix this?

    After upgrading my iPhone4 to the latest IO it no longer connects to wifi, how do you fix this?

    knifepainter wrote:
    What I know is that the phone worked perfectly fine until I upgraded the software. I've tried resetting the network settings to no avail. I've shut the phone off, put it in a ziplock baggie and then into the freezer for 15 minutes. This made the wifi work temporarily but then it goes back to being grayed out. The wifi does not work at other wifi sites away from my home as well. Seems like an apple issue to me and would appreciate someone coming up with a fix, apparently I'm not the only one having this problem. Thanks for replying to my query, any ideas?
    It's likely a hardware issue.  The iOS will not directly cause this issue.
    Use this article first:
    iOS: Wi-Fi settings grayed out or dim - http://support.apple.com/en-us/TS1559
    If that fails to resolve it, then try setting it up as new and testing again.
    How to erase your iOS device and then set it up as a new device or restore it from backups - http://support.apple.com/en-us/HT4137
    If the issue remains even after set up as new, it's a hardware problem, not a software problem.  You'll need to contact Apple for you hardware service options.  If within warranty it should be free.  If not, expect to pay $149 USD + tax if it's an iPhone 4, $199 USD + tax if it's an iPhone 4S.

  • How do I open CS4 files after Upgrading to Cloud? The older files are showing up gray and won't open

    How do I open CS4 files after Upgrading to Cloud? The older files are showing up gray and won't open.

    InDesign files are compatible wih all the newer versions. A cs4 file sh
    Could you answer a few questions to help us better understand the issue:
    If you are trying to open the files by double clicking them, do they give any error??
    Have you tried to drag a file into indeisgn, if yes what happends when you do that??
    Is there any error message that you get??
    Also if you create a new files in InDesign CC does it show up as grey like the cs4 files or do they open fine??

Maybe you are looking for

  • My Mac's name is changing time by time...

    Hi, I've just upgraded to Yosemite, but all goes wrong, BT, speed down, wallets stopped synronise from iCloud/Drive between mac an ios, so lost  f...ing importand passwords AND my Mac's name is changing time by time, many times a day.... I set up in

  • Creation of campaign from template through program in web ui

    Hi, We have requirement to send notifications to customers.We are using campaign framework to send notifications.Need to create a new campaign from an existing campaign template  and release the campaign through a program in web ui. Please suggest me

  • Costing variant in OKKN

    We are implementing SAP best practices. While maintaining costing variant in OKKN I didn't find three fields which need to be entered. These are org level, cost element indicator and currency indicator. But when I checked in SE16 for table V_CK03 the

  • To Transport query which has Jump settings set in RSSBS

    Hi Experts,   I have a sender and receiver query in development.I have done the settings for sender and receiver in RSSBS.Now I need to transport only these two queries along with the Jump paramters. Can any one help me in this? Reward Points expecte

  • CFP-2220 using digital output for status to another cFP-2220

    I have two cfp-2220 that I want to connect with each other using the DIO's of 5V that they have. The problem that I have is that I don't know the impedance to connect the CFP2220-1 Digital Output 1 to a relay for switching the CFP2220-2 Digital Inpu