Error with a customer exit variable

I have a customer exit variable in a characteristic (0fiscyear). Also I have a manual input variable on the characteristic 0fiscper. The customer exit collects the four digits of the year that the user introduces a screen for the characteristic 0fiscper. Collect the value correctly and in the development system does not give error, but in the production system said that "the value 2008 (for example) is not valid for 0fiscyear characteristic". The two systems are at the same level of patches and queries are identical. Any idea why this error??
Thanks and regards
Ricardo

No value at all behind 0fiscyear ?

Similar Messages

Problem with Bex Customer Exit Variable

Hi Friends,
I have a customer exit variable which is getting filled based on the User Input. I have written the code inside the If condition checking i_step = 2. The code is working as required.
But the problem is when I try refreshing the query or change the user variable selection, the Customer exit variable is not changing. I tried to debug the code and realized that the values for the exit variable based on the previous selection is not cleared and the i_step = 2 is not being executed for the variable.
While I close and reopen the query, the code is working fine.
Does anyone know why this is happening? Please suggest..
Thanks in advance..
Regards,
Priya

Hi Binu,
Here is the code sample. I am trying to populate the month based on the input Week number '0I_WEKIN'
. For eg. If I give 37.2011, the month value should be 08.2011. If I give 39.2011, month should be 09.2011.
WHEN 'ZC_MONTH'.
    IF i_step = 2.     "after the popup
        READ TABLE i_t_var_range INTO lw_var_range WITH KEY vnam =
    '0I_WEKIN'.
       IF lw_var_range-high IS NOT INITIAL.
          l_week = lw_var_range-high.
          l_week = l_week - 3.
          CALL FUNCTION 'WEEK_GET_FIRST_DAY'
            EXPORTING
              week = l_week
            IMPORTING
              date = l_date.
          lw_range-low = l_date+0(6).
        ENDIF.
        lw_range-sign = 'I'.
        lw_range-opt = 'BT'.
        APPEND lw_range TO e_t_range.
    ENDIF.
Regards,
Priya

Error while executing customer Exit Variable (No value could be determined for variable. BRAIN 632)

Hello,
I created a customer exit variable which has to show the range between the first and last day of the previous month. The query will be executed every first of the month.
Variable is declared as: Customer exit, based on 0CALDAY, Interval, Mandatory and NOT input.
When i debug the query, it is making the calculation but its not populating my variable; when I execute the query from RSRT, the output test shows a message:
ENo value could be determined for variable ZRANGE_PREVMONTH. BRAIN 632ZRANGE_PREVMONTH
Below the code i'm using (SAP 7.4)
***Customer Exit to calculate previous month.
IF i_step = 2.
 CASE i_vnam.
 WHEN 'ZRANGE_PREVMONTH'.
DATA: LS_RA_SID TYPE RSR_S_RANGESID.
DATA: yyyy(4) TYPE n.
DATA: mm(2) TYPE n.
DATA: dd(2) TYPE n.
DATA: fst_date LIKE sy-datum.
DATA: fst_date2 LIKE sy-datum.
LOOP AT i_t_var_range_c INTO loc_var_range
 WHERE vnam = '0DAT'.
 dd = sy-datum+6(2).
 mm = sy-datum+4(2).
 yyyy = sy-datum+0(4).
 fst_date2 = sy-datum.
 IF dd = '01' AND mm = '01'.
 mm = '12'.
 yyyy = yyyy - 1.
 ELSEIF dd = '01' AND mm <> '01'.
 mm = mm - 1.
 ELSEIF dd <> '01'.
 mm = mm - 1.
 ENDIF.
 CLEAR: fst_date.
 CONCATENATE yyyy mm '01' INTO fst_date.
 fst_date2 = fst_date2 - 1.
 CLEAR: ls_ra_sid.
 ls_ra_sid-sign = 'I'.
 ls_ra_sid-opt = 'BT'.
 ls_ra_sid-high = fst_date2.
 ls_ra_sid-low = fst_date.
 APPEND ls_ra_sid TO e_t_range.
ENDLOOP.
ENDCASE.
 ENDIF.

Hi Fernanda,
Try this:
DATA: LS_RA_SID TYPE RSR_S_RANGESID.
DATA: fst_date LIKE sy-datum.
 CASE i_vnam.
 WHEN 'ZRANGE_PREVMONTH'.
fst_date = sy-datum - 1.
concatenate fst_date(6) '01' into ls_ra_sid-low.
 ls_ra_sid-sign = 'I'.
 ls_ra_sid-opt = 'BT'.
 ls_ra_sid-high = fst_date.
 APPEND ls_ra_sid TO e_t_range.
ENDLOOP.
ENDCASE.
 ENDIF.
Just post here for any queries..
Regards,
Loed

Understanding complex query with selections(customer exit variables)

Hi experts,
I am trying to understand one query having a combination of selections and BEx variables in it.
In Characteristic Restrictions panel of Query Designer:
we have some CHARs restricted by means of authorisation variables
In Default Values panel:
some other CHARs without any filters
In free CHARS panel
some characteristics
In Rows panel:
some more chars that were placed in Default values panel
In Columns panel:
Formula YTD on selection YTD
Formula Monthly on selection Monthly
Selection on YTD characteristic(hidden)
Selection on Monthly characteristic(hidden)
Selection XX(in definition,I saw selection on YTD Keyfigure and a characteristic variable VAR1(i-step=1) filled with customer exit..this variable picks up right version of Master Data...our system has many versions of master data,one for each year)
Selection YY(in definition,I saw selection on Monthly key figure and the same characteristic variable VAR1 we used in Selection XX)
When I execute this..I see one variable popup which asks for values for year and version of master data...I enter master data version for that year and the year....I see the result...
Now I tried to experiment to learn...I deleted Selection XX and Selection YY and tried to execute....a variable popup asking for year...I enter year and tried to execute..it throws message---'Value for variable VAR2 cannot be determined'......
I couldnot understand this error because VAR2 is a customer exit characteristic variable defined in CMOD...ITS NEVER USED IN THIS QUERY...but defined in CMOD to pick up correct version of Master data..its defined in such a way that it picks value depending upon VAR1 varaible....both variables function is same...its just that VAR1 works on i_step=1 and VAR2 works on i_step=2 plus dependent on VAR1....
Can anyone understand why I am seeing error about VAR2 when its never used in Query....??
Thanks for your inputs....

Hi Vikram,
I am unable to find VAR2 anywhere in query designer....Can it be like that its hidden?
Thanks and Rgds,
SChand

Authorization (rsecadmin) with customer exit variable

Hello,
I need to maintain authorization on 0CALMONTH with a customer exit variable.
0CALMONTH is "authorization relevant"
I created a variable of type "customer exit" : ZVAR001 (this variable is OK, I checked its value in a query)
I created a new authorization object with 0CALMONTH = $ZVAR001.
When I run my query I have a message due to authorization error.
If I change my authorization object by replacing my variable ($ZVAR001) by a constant value I have no authorization problem.
I don't understand why...
Error logs don't help me to solve my problem : I have the following message "Message EYE007: You do not have sufficient authorization" and system just says I have "0CALMONTH I EQ $ZVAR001 " but doesn't precise values under variable ZVAR001
Thanks for your help

Indeed problem was in costumer exit because I used condition with "I_STEP". Since I have delete my condition I have no authorization problem with my variable....

Problem with customer exit variable that is input ready as well

Hello all,
I'm facing an issue with a customer exit variable that again has been defined as input ready. I'm not sure why it is working incorrectly and I#m wondering if this is a bug or if I do s.th. stupid.
The problem is that in the exit program ZXRSRU01 this varibale does not go into the program code I have prepared for this variable. I have added entry points for all three i_step values 1,2,3, but the code will never be touched and in debugging I can see that it simply pypasses the code for this variable.
I have tried to enter a value or to leave it blank, no difference.
When I run another test by just using a customer exit variable w/o input ready capability, then I have no issue, the exit does exactly what I have coded.
Does this mean, that a customer exit variable along with input readiness dows not work ?????
You may ask why I need this variable. Well, my intention is to use the input value of this variable A to derive other values for a complete different variable B. Afterwards I want to erase the input given into variable A to have it blank.
Any comments are appreciated
Thanks

Hi Heiko,
I assume A & B variables are defined on different Characteristics. If you wish to derive B based on A, you can create the Query Characteristic Restriction on B & have a dummy RKF restricted on A whose processing is by Manual Input; where processing of B is by Customer Exit. In istep 2 you can check for B, read A & derive B. There would not be a need to blank out A since the Query would not be restricted on A - you can hide the dummy RKF from showing in the output. Just a thought.
--Priya

RSCRM: Query date with customer exit variable

Hi All,
Is there any way to run the RSCRM transaction with a query with a customer exit variable for a date characteristic?
The issue is that the query ran ok but the variable is not being updated when the RSCRM query is running with a background job or a process chain.
Thanks in advance
EV

I do not think you can select Customer Exit variable, if you see the type is selected to Char Value Variables and it is not editable.
It would be suggested to go for Customer Exit procesing type for your text variable.
Cheers,
Neel.

Behavior of customer exit variables (used as prompt) in a workbook

Hi All,
We are on NW2004s. I am using a customer exit variable in the prompt for my query then saved the query as a workbook.
1. When I run the query the customer exit routine/program is called and the selection screen variable is populated with the correct value.
Ex. Calendar year variable is a prompt variable defined as customer exit variable that gets the current year.
when you run the query the prompt for calendar year shows "2007" as default value. this is correct.
2. when I run the workbook using this same query, it looks like it is not executing the customer exit program. The value in the calendar year prompt is whatever the last value used when the workbook was last ran.
I also placed a breakpoint in the customer exit program (EXIT_SAPLRRS0_001) to check if it is being called and it looks like it isn't.
Is there a configuration/property that I should enable/check to make sure that customer exit variables used as prompts works in workbooks? Is this a bug? Anybody else have issues with using customer exit variables as prompts in their workbooks?
Thanks in advance,
Malou

Hello Marilou,
See the abswer I got from the 1st response on my question
Save and reuse variable option in 7.0
It may be a good help.
Variables seem to be an understated item in the documents.
Kind regards
Message was edited by:
BI developer

Customer exit variable output error

Hi gurus,
I have created one customer exit variable. in the selection screen i am giving multiple plant and material value,
my code is working for sigle plant and single material.
when i have taken multiple value. i am getting error message
error is 'No value determined for th variable"
When i debug my code in RSRT, it is giving all the values for different combination of plant and material. and those values are getting in the E_T_RANGE.
but out put it is giving the error.
my code is:
WHEN 'ZPRDEMVA'.
    IF i_step = 2.
      READ TABLE I_T_VAR_RANGE INTO LOC_VAR_RANGE
      WITH KEY VNAM = 'ZPRRNDT'.
      v_date = LOC_VAR_RANGE-LOW.
      v_year = v_date+0(4).
      v_month = v_date+4(2).
      v1_date = v_date+6(2).
      v3 = v_year - 1.
      v4 = v_month - 1.
      if v4 = 00.
      v4 = 12.
      v3 = v3 - 1.
      endif.
      concatenate v3 v4 v1_date into ddate.
      CALL FUNCTION 'DATE_GET_WEEK'
        EXPORTING
          DATE         = ddate
        IMPORTING
          WEEK         = zweek
        EXCEPTIONS
          DATE_INVALID = 1
          OTHERS       = 2.
      CALL FUNCTION 'WEEK_GET_FIRST_DAY'
        EXPORTING
          WEEK         = zweek
        IMPORTING
          DATE         = monday
        EXCEPTIONS
          WEEK_INVALID = 1
          OTHERS       = 2.
      sunday = monday + 6.
      v3_date = monday.
      v4_date = sunday.
      LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
              WHERE VNAM = 'ZPRPLNML'.
      CLEAR L_S_RANGE.
        v_werks          = LOC_VAR_RANGE-LOW.
      LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
              WHERE VNAM = 'ZPRMATML'.
      CLEAR L_S_RANGE.
        v_matnr          = LOC_VAR_RANGE-LOW.
      data: dummy_menge like i_mseg-menge value '0.01'.
      Do 52 times.
           select MATERIAL PLANT QUANT_B MOVETYPE
                 from /BIC/AWINO0100 into table i_mseg
                 where PSTNG_DATE between monday and sunday
                 and   MOVETYPE between 261 and 262
                 and   MATERIAL = v_matnr
                 and   PLANT = v_werks.
                     if sy-subrc NE 0.
                       i_mseg-menge = '0.01'.
                       i_mseg-matnr = v_matnr.
                       i_mseg-werks = v_werks.
                       i_mseg-bwart = '261'.
                       append i_mseg.
                     endif.
        loop at i_mseg.
          itab1-matnr = i_mseg-matnr.
          itab1-werks = i_mseg-werks.
          itab1-menge = itab1-menge + i_mseg-menge.
          itab1-bwart = i_mseg-bwart.
          COLLECT i_mseg into itab1.
        endloop.
        sort itab1 by matnr werks bwart.
        loop at itab1 where bwart = '261'.
          itab2-matnr = itab1-matnr.
          itab2-werks = itab1-werks.
          itab2-bwart = itab1-bwart.
          itab2-menge = itab1-menge.
          read table itab1 with key matnr = itab2-matnr
                                    werks = itab2-werks
                                    bwart = '262'.
          if sy-subrc = 0.
            itab2-menge = itab2-menge - itab1-menge.
          endif.
          append itab2.
        endloop.
        clear itab1[].
        refresh itab1.
        sunday = sunday + 7.
        monday = monday + 7.
      ENDDO.
      loop at itab2.
        sum1 = sum1 + itab2-menge.
      endloop.
      average = sum1 / 52.
      loop at itab2.
        sum2 = sum2 + ( ( itab2-menge - average ) * ( itab2-menge - average ) ).
      endloop.
      sum2 = sqrt( sum2 / 52 ).
      l_s_range-sign = 'I'.
      l_s_range-opt = 'EQ'.
      l_s_range-low = sum2.
      Append l_s_range to E_T_RANGE.
      clear itab2[].
      refresh itab2.
      sum1 = 0.
      sum2 = 0.
      monday = v3_date.
      sunday = v4_date.
      ENDLOOP.
      ENDLOOP.
    ENDIF.
Can any one please help me.
Thanks in advance.

Hi Alec,
i created a customer exit with the formula variable only. in the code i am getting the both quantity and unit fields. now i want to get quantity with unit in output.
thanks

Error creating Customer Exit variable, please help

Hi Experts,
This is the scenario, I need to obtain the convertion rate from the table TCURR in order to convert several currencies to USD, so I created a Customer Exit variable that gets the Period and based on that obtains the conversion rate for the last day of the given month from TCURR, the problem is when I created the Formula Variable to get the value from the Customer exit variable I got the following error:
'ZVARREGEXIT' ALREADY EXISTS; SELECT A DIFFERENT NAME.
But in not using that name anywhere on my variables creation, Im doing something wrong? How can I check wheres is that variable being used.
Ideas, comments are always welcome and appreciated.
Regards.

Hi Ed,
Open Admin Workbench (RSA1) and choose Transport Connection --> Object Types --> Query Elements --> Variable --> Select Objects. Find the variable of interest and transfer it back to the main screen, then right-click and choose 'Display Description'. That will show you a "where used" list of queries, workbooks, etc.
Next, you can use the previous technique to open one of the queries, find the variable in the query, and determine which InfoObject it is associated with.
Hope this helps!
Regards,
Saurabh

Customer exit variable with exclusion

Hello all, anyone know why a customer exit variable cannot exclude values ?
I've tried with multiple, single and interval without success (it give me a generic error in the customer exit for my variable).
Only the "selection option" mode seems to be enabled to exclude values (also in debug mode with rsrt transaction).
Unfortunately, I cannot use selection option (because this exclusion is an integration of pre-existence selection on a complex structure).
We have SAP BW 3.1C, with SP16. I've looked for sap notes but nothing about this problem (may be a limit).

Now I post my code. The variable is a "Multiple Single Values", optional, not "Ready for Input".
This is my code.
DATA: L_S_RANGE TYPE RSR_S_RANGESID.
If I_STEP = 2.
 CASE I_VNAM.
 WHEN 'ZXXXXX'.
 clear l_s_range.
 l_s_range-sign = 'E'.
 l_s_range-opt = 'EQ'.
 l_s_range-low = 'xxxxxxx'.
 append l_s_range to e_t_range.
 ENDCASE.
ENDIF.
The query raise an error (generic error on customer exit).
I've debugged the code. Error has raised from plausibility_check on RRS_VAR_VALUES_EXIT_AFTER. The following is the code that raise the error.
 CASE i_vparsel.
 WHEN rro04_c_vparsel-param
 OR rro04_c_vparsel-multiple
 OR rro04_c_vparsel-table.
 IF <l_s_range>-sign <> rs_c_range_sign-including
 OR <l_s_range>-opt <> rs_c_range_opt-equal.
 PERFORM raise USING rs_c_false g_c_ue_invalid_range
 i_vnam space space space.
 ENDIF.
From this code, it seems that with multiple selection we only have sign including and option equal.
What do you think about ?

Error Message : " No value could be determined for Customer Exit Variable "

Hello BI Experts ,
I have created a "ZYTD_PERIOD" Customer Exit Variable Interval Mandatory and ready for input check mark removed.
The reference character is '0FISCPER' .
I want to have YTD figures when the user enter single Fiscal Year Period for variable 0P_FPER.
So I have written below code in SE37 : EXIT_SAPLRRS0_001 and include program : ZXRSRU01
==================================================================
case i_vnam.
              WHEN 'ZYTD_PERIOD'.
              IF I_STEP = 2.
              LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = '0P_FPER'.
              CLEAR L_S_RANGE.
              L_S_RANGE-LOW0(4) = LOC_VAR_RANGE-LOW0(4).
              L_S_RANGE-LOW+4(3) = '001'.
              L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
              L_S_RANGE-SIGN = 'I'.
              L_S_RANGE-OPT = 'BT'.
              APPEND L_S_RANGE TO E_T_RANGE.
              EXIT.
              ENDLOOP.
              ENDIF.
===================================================================
After that I use this 'ZYTD_PERIOD' variable in the query .
Also I have used the variable 0P_FPER in another structure.
When I execute the query by entering the value of 0P_FPER as 010.2009 or any other value ,
I am getting below error message ,
*No value could be determined for variable ZYTDPERIOD*_
Below is details of this Error message ,
Note that I have proper Master and Text data for 0CO_AREA and 0COMP_CODE loaded into BI.
=======================================================================
Diagnosis
This error diagnosis is specific only to the variables 0P_FVAEX or 0P_CTPCA !
Termination message BRAIN 632 appears:
Could not determine value for variable 0P_FVAEX (or 0P_CTPCA).
System Response
1. Operation method of SAP-Exit-Variables 0P_FVAEX or 0P_CTPCA
With queries from the CO application, both SAP-Exit-Variables look for an entry for 'controlling area'. With this controlling area from the selection screen, the SAP-Exit-Variables program reads the attributes for InfoObject 0CO_AREA (controlling area).
With queries from the FI application, the SAP Exit Variable 0P_FVAEX looks for an entry for 'company code'. With this company code from the selection screen, the SAP Exit Variables program reads the attributes for InfoObject 0COMP_CODE (Company Code).
0P_FVAEX determines the fiscal year variant (attribute 0FISCVARNT) from the attributes for 0CO_AREA (CO queries) or 0COMP_CODE (FI queries). 0P_CTPCA determines the currency type of the profit center local currency (attribute 0CURTP_PCA) from the attributes for 0CO_AREA.
2. Cause of Error
The attributes for the controlling area (InfoObject 0CO_AREA) or company code (InfoObject 0COMP_CODE) were not loaded into the BW system, or the attributes for the controlling area are not active in the BW system.
Check whether this is the cause of the error in your BW system. Display the contents of table /bi0/mco_area or /bi0/mcomp_code using transaction se16.
Application CO:
Check whether the attributes 'fiscal year variant' (field FISCVARNT) and 'profit center local currency currency type' (field CURTP_PCA) are filled in the 'A' version (field OBJVERS) for the selected controlling area. If the fiscal year variant in the OBJVERS = 'A' is empty, then the error is with variable 0P_FVAEX. If the currency type of the profit center's local currency in OBJVERS = 'A' is empty, then the error is with variable 0P_CTPCA.
Application FI:
Check whether or not the attribute 'fiscal year variant' (field FISCVARNT) is filled in the 'A' version (field OBJVERS) for the selected controlling area. If the fiscal year variant is empty in OBJVERS= 'A', then the error is with variable 0P_FVAEX.
Procedure
Using InfoSource 0CO_AREA, load the attributes for the controlling area or company code into your BW system.
Afterwards, activate the attribute changes in your BW system. To do this, use transaction rsa1, path 'Tools > Hierarchy/Attribute changes', functions button 'InfoObject list'. Choose InfoObject 0CO_AREA or 0COMP_CODE from this list, and activate the attribute changes.
=====================================================================================
Is there any special settings needed before writing BEx Customer Exit ?
I have already created a project in CMOD and assinged a proper RSR00001
and EXIT_SAPLRRS0_001 and project is active.
Any help please ....
Regards ,
Amol

My Code is as below ,
          case i_vnam.
              WHEN 'ZYTD_PERIOD'.
              IF I_STEP = 2.
              LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = '0P_FPER'.
              CLEAR L_S_RANGE.
              L_S_RANGE-LOW0(4) = LOC_VAR_RANGE-LOW0(4).
              L_S_RANGE-LOW+4(3) = '001'.
              L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
              L_S_RANGE-SIGN = 'I'.
              L_S_RANGE-OPT = 'BT'.
              APPEND L_S_RANGE TO E_T_RANGE.
              EXIT.
              ENDLOOP.
              ENDIF.
              ENDCASE.

Crystal Reports with BEx Query using Custom Exit Variable

Hi,
We have BW BEx Query using Customer User Exit variable to derive the Fiscal Week for Last Year (called it VAR2) based on another user input variable Current Fiscal Week (called it VAR1).
VAR2 is derived from VAR1 in CMOD via some codings and thus it DOES NOT have the "Variable is Ready for Input" flag ticked in the BEx. VAR1 is user input variable, so it has "Variable is Ready for Input" flag ticked in the BEx.
When we create a Crystal Reports with the BEx Query using variable VAR2, and when we run it we got an error message saying "Failed to execute query; '[]<java.lang.UnsupportedOperationException: No Selection State Support!ZP_MI_LYPUBWEEK>'. Redesign your query or contact the data source maintainer to solve the problem". (note: ZP_MI_LYPUBWEEK is VAR2 in this case).
Could anyone please assist? Surely, CR supports BEx customer user exit variables like the above, right?. I also refer to the forum below as it seems to have a similar issue (except mine with an error message), but it does not provide a solution in it.
Crystal Reports with BEx Query using Custom Exit Variable
Thanks,
Andy

Hi Vibhav,
We have the SAP Crystal Reports for Enterprise XI4.0 Version 14.0.0. Not sure if SP0 or other SP, got to check with Basis Team later.
We tried that "mandatory" option and did not work either.
Anyway, SAP has now come back again saying it is something they will fix it in next release/version. We got a phone call from them and a reply below to our OSS.
23.08.2011 - 08:20:49 CET - Info for Customer by SAP
I have raised this issue on the Idea#s Place as an enhancement request
on the below link:
https://cw.sdn.sap.com/cw/ideas/5586
This ER contains the information of including the customer exit
variables in the report without checking the #input for ready# option.
This ER can be considered for being implemented in the future
versions. You can refer to SAP Note: 1515837 - How To: Enhancement
Request Process - "Idea Place" for more information regarding the Idea
Place.
Cheers,
Andy

Display Error Message in BW Report based on Customer Exit Variable

Hi
I need to display an error message in the BW report based on the value of a customer exit variable - i was able to do this successfully in BW3.5 using the below code.
WHEN 'ZUPN'. "Here ZUPN is the customer exit variable
 IF i_step = 1.
 <check for condition -- if successful, variable flag = 1, else variable flag = 0>
 IF flag = 0.
 MESSAGE e157(00). "Error Message
 ENDIF.
 ENDIF.
I have upgraded my system to BI 7.0 now. Whenever the variable check is not successful, it displays a blank screen instead of the error message in the report. Please advice if we need to change the code and how ??

Bhanu,
Thanks for u r reply.This warning message appears every time i execute the report through portal.
Any idea ?
Regards
Mano

Error in the ABAP Code for Customer Exit Variable

Could you please update me what is the wrong with the below ABAP Code developed for Customer Exit Variable in BW
i created a Variable (ZVWKNO) of Customer Exit,Single Value ,Mandatory and Variable is ready for input
In CMOD i had written the below Code:
When 'ZVWKNO'.
DATA: WEEK(2) TYPE N,
WEEKNO(2) TYPE N.
IF i_step = 1.
l_st_date = SY-DATUM.
CALL FUNCTION 'DATE_GET_WEEK'
EXPORTING
DATE = l_st_date
IMPORTING
WEEK = l_fn_week.
CHECK sy-subrc = 0.
WEEK = l_fn_week+4(2).
If WEEK 0.
WEEKNO = WEEK - 1.
l_s_range-low = WEEKNO.
l_s_range-sign = k_sign_inclusive.
l_s_range-opt = k_option_equals.
APPEND l_s_range to e_t_range.
ENDIF.
ENDIF.
But when i execute the query the default value is not populated with Week-1 No in the variable screen
Please update me what went wrong
Thanks

Case ZVWKNO.                "write this with out comments
When '1'.              "write the value that needs to equal with value in varaible ZVWKNO after when in sungle quotes
DATA: WEEK(2) TYPE N,
WEEKNO(2) TYPE N.
IF i_step = 1.
l_st_date = SY-DATUM.
CALL FUNCTION 'DATE_GET_WEEK'
EXPORTING
DATE = l_st_date
IMPORTING
WEEK = l_fn_week.
CHECK sy-subrc = 0.
WEEK = l_fn_week+4(2).
If WEEK 0.                                    "check this Week Minimum is '01' and Maximum '52'
WEEKNO = WEEK - 1.
l_s_range-low = WEEKNO.
l_s_range-sign = k_sign_inclusive.
l_s_range-opt = k_option_equals.
APPEND l_s_range to e_t_range.
ENDIF.
ENDIF.
Prabhudas

Error with a customer exit variable

Similar Messages

Maybe you are looking for