Error with activation of DSO

Hi!
I load data to DSO. My requests are green. But when I activate data requests are red without errors.
Then I only have to activate each request.
Why?

There is nothing in sm21, st22.
In activation log:
Diagnosis
If multiple requests are activated together, aggregation behavior of updated InfoObjects saved during loading has to be identical. This is not the case for the selected requests.
Procedure
a.) Delete the loaded requests from the DataStore object. Correct the update or transformation rules so that the criterion above is fulfilled. Then you can load the data again and activate the requests together.
or
b.) Activate the requests separately
I don't understand what diagnosis means...

Similar Messages

Issue related with the Date Format --- error when activating the DSO

Hi Friends..
plz help me to fix the issue ...im getting when activating the DSO...
Actually im not getting error when loading the data thru DTP..im facing this issue while activating the DSO..
is there any routine to solve this or i have to go for data selection in info package ......
I have searched in the forum also..but im not able to fix..plz help
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRMPOSTDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZKITRDT*
Value '01/20/20' of characteristic 0DATE is not a number with 000008 spaces
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZMNS_DATE*
Value '20101502' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_EXCDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_PRIDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZCOMPDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZDUEDAT*
Value '20101402' of characteristic 0DATE is not plausible
Thanks
Baskar
Edited by: tjgnanabaskar on Aug 6, 2010 5:35 PM

Hi Friends..
plz help me to fix the issue ...im getting when activating the DSO...Actually im not getting error when loading the data thru DTP..im facing this issue while activating the DSO..is there any routine to solve this or i have to go for data selection in info package ......I have searched in the forum also..but im not able to fix..plz help
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRMPOSTDAT
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZKITRDT
Value '01/20/20' of characteristic 0DATE is not a number with 000008 spaces
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZMNS_DATE
Value '20101502' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_EXCDAT
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_PRIDAT
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZCOMPDAT
Value '31122009' of characteristic 0DATE is not plausible
Thanks
Baskar

SID Generation Error while activating the DSO.

Hello Gurus,
Am trying to load the data to a dso in FIGL, the data is getting loaded to the dso very fine, this is extracting data of 1700000. But the problem is while activating the dso it throws an error "Activation of M records from DataStore object.
In dump error, DBIF_RSQL_SQL_ERROR
CX_SY_OPEN_SQL_DB
SQL error in the database when accessing a table.
So please advice me to solve this problem would be appreciated and reward points.
Arun

Hello Arun kumar,
That's easy you have errors in the field 0REF_KEY3.
Since it is a DSO it let's you load everything but in the time of the activation it complains!
The system is trying to generate a new SID for the master data of the InfoObject 0REF_KEY3 with that value (or values) and since it has garbage on it (invalid characters like "!", etc.) it gives you that short dump.
Try to find that record, change it in PSA and reload the request again.
TCode-E3//Rec.Typ-CO
The system don't like that string for generating the SID. Try to eliminate "//" and "." from it. (for test purposes you can simple change it to nothing and see if it passes the load and activate again)
Try to see if you have more records like those and fix them too.
That should work.
Please assign points if it helps,
Diogo.

Error during activation of DSO - Activation of M records from DataStore obj

Hi All,
Below is the error i am getting while activating the DSO, Even though similar post on this topic, solution not mentioned, any solution greatly appreciable.
When -
During Activation of DSO
State of DSO -
Request become "RED", It is available for reporting, some records in Active table, some in new table and some in new table.
Job Log -
Error when inserting the data record for data package
Process 000105 returned with errors
Error when inserting the data record for data package
Process 000106 returned with errors
Process 000107 returned with errors
Data pkgs 000001; Added records 1-; Changed records 0; Deleted records 0
Log for activation request ODSR_4GXKRYHMY97R9U62M6U52XXXY data package 000001...000001
Errors occured when carrying out activation
Analyze errors and activate again, if necessary
Activation of M records from DataStore object Z_DSPO terminated
Report RSODSACT1 ended with errors
Job cancelled after system exception ERROR_MESSAGE
Detail log -
Error when inserting the data record for data package 106
Message no. RSODSO_PROCESSING002
Diagnosis
Failed to store data records persistently. Possible causes are:
You tried to save a record that is already stored in the database.
This error only occurs with DataStore objects with option "Unique Data Records".
A unique index was created for the table of active data.
You can check this in the Data Warehousing Workbench by choosing "Display" for the DataStore object and opening the "Indexes" folder.
There is a technical problem on the database.
Thanks,

HI PT,
I am also getting the same error like i have loaded the data into DSO and tried to activate the init request but it has become red and checked in log found that there are some SID Generation errors so please give me the step by step solution.
SID Generation
Data Package 000056
Data Package 000064.
Thanks in advance,
Jay

Error in activation of DSO

Hi all,
we are geting an error while activating the data of a DSO.
ERROR: The object is locked by user RFCUSER.
We tried to go to sm12 to see the List.
We have two entries in the list related to that DSO.
Please suggest.
Thank You.

Hi Maxban,
There are two options for you.
1. Wait till the lock is released and repeat your DSO Activation step.
2. Delete the lock and repeat your DSO Activation step. To delete the lock on an entry, select the object in SM12 > Lock Entry(Menu) > Delete. If you are not authorized to delete the lock, get it deleted from your Basis team.
Waiting or Deleting your lock entry depends on your data load priority.
Hope this helps.
Regards
Sai

Error while activating 0FIAR_O03 DSO from Business content

Hi,
While I am activating 0FIAR_O03 DSO from Business content, getting an error "You do not have authorization for InfoSource 80FIAP_O03".
Thanks,
RAJ

Hi raj,
The error message clearly tells that you are not authorized...some of the authorization object is missing from ur profile...check the missing Auth object and get it add to ur ID.
do the following... try to activate the DSO once again ... you will get the message again
now enter transaction SU53 -- and click ok -- it will display the missing auth object from ur profile.
if it does not display any thing try to run the authorization trace using ST01 transaction ... to get the missing auth object.
Regards
KP

Error while activating in DSO, FIGL, only some months

Dear Colleagues!
I have an activation problem in an ODS, three differnt months loaded isolatedreturns with error when I activate. The error only occurs in June, July and august of 2004. 2005, 2006, 2003, 2002, 2001 and the rest of 2004 loads and activates fine!
<b>Error messages:
Error when assigning SID: Action VAL_SID_CONVERT table 0ORG_DOC_YR
SYST: Period 001 is not valid in financial year variant K1</b>Process 000108 returned with errors
Activation of M records from DataStore object ZFIGL_O2 terminated
Do you have any suggestions what this can be, or suggestions on what I can do to fins out more about this? And why it failes for these three months and not the rest of the years?
Regards Silje

Hi Ravi!
How do I check the fiscal year variant? By the way it is only for 2004 (june, july, august). The other years transfers and activates ok.
In my transformation 0FISCVARNT is filled out by the R/3 field FISCVAR. I can try to set it to contant value K1 and load again to see if it will activate.
Thank you!
Silje

Hexadecimal error during activation of DSO from datasource

hi guys,
im facing this error during DSO data activation:
Value '"1st anniversary,birthday & staff party"' (hex. '2200310073007400200061006E006E00690076006500720073') of characteristic ZTXOSIK1 contains invalid characters
is there any routine that i can put in transformation to fix this error.. please advice.

Hi,
Long back i faced this Hex Values issue, i used the below code in the charecterictic routine of transforamtions
my source field was: TXZ01
my target infoObject was : ZMAT_TXT
please find the code below which i used, first read it and do the needful changes as per your requirement
FIELD-SYMBOLS: <ic> TYPE x.
    DATA: hex_count LENGTH 2 TYPE n.
    DATA: char_count LENGTH 2 TYPE n.
    DATA: x8         LENGTH 2 TYPE x.
    DATA:
    hex1(64) TYPE x VALUE
'00000020000100200002002000030020000400200005002000060020000700200008'
'002000090020000A0020000B0020000C0020000D0020000E0020000F0020',
    hex2(64) TYPE x VALUE
'00100020001100200012002000130020001400200015002000160020001700200018'
'002000190020001A0020001B0020001C0020001D0020001E0020001F0020'.
    IF SOURCE_FIELDS-txz01 = ' '.
      RAISE EXCEPTION TYPE CX_RSROUT_SKIP_RECORD.
    ENDIF.
    RESULT = SOURCE_FIELDS-txz01.
    hex_count = 0.
    char_count = 0.
0000---001F
    ASSIGN RESULT TO <ic> CASTING TYPE x.
    DO.
      MOVE <ic>+hex_count(2) TO x8.
      SEARCH hex1 FOR x8 IN Byte MODE.
      IF sy-subrc <> 0.
        SEARCH hex2 FOR x8 IN BYTE MODE.
        IF sy-subrc = 0.
          result+char_count(1) = ' '.
        ENDIF.
      ELSE.
        result+char_count(1) = ' '.
      ENDIF.
      IF hex_count < 78.
        ADD 2 TO hex_count.
      ENDIF.
      ADD 1 TO char_count.
      IF char_count >= 40.
        EXIT.
      ENDIF.
    ENDDO.
Regards
Reddy A

Can not update exchange due to error with Active directory

Error:
The following error was generated when "$error.Clear();
Install-CannedRbacRoles -InvocationMode $RoleInstallationMode -DomainController $RoleDomainController
" was run: "Active Directory operation failed . This error is not retriable. Additional information: Access is denied.
Active directory response: 00000005: SecErr: DSID-031520B2, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0
I have tried everything I can find on the web. any assistance would be appreciated. Thank you.

I see now that you have logged into domain
Another thing, check if Allowed Inheritance is blocked on this account (bmoore)?
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Error with Active Directory Synchnorisation from Shared Services to Essbase

Have recently installed HS9 v 9.3.1
In Shared Services i have created both native and MSAD users. Everything works fine with the native users (Planning,EAS etc...)
MSAD user directory has been configured & tested -ok on Workspace.
The MSAD users have been provisioned and can access Workspace & Shared services without any issue.
However, when accessing Planning, the following error is displayed in the Essbase server log:
Tue Mar 18 15:12:39 2008]Local/ESSBASE0///Info(1051001)
Received client request: Create External User With Type (from user [hyperion])
[Tue Mar 18 15:12:39 2008]Local/ESSBASE0///Error(1051205)
Single Sign On function call [css_getUser] failed
[Tue Mar 18 15:12:39 2008]Local/ESSBASE0///Warning(1051003)
Error 1051205 processing request [Create External User With Type] - disconnecting
[Tue Mar 18 15:12:39 2008]Local/ESSBASE0///Info(1051001)
Received client request: Set Application FrontEnd Type (from user [hyperion])
[Tue Mar 18 15:12:39 2008]Local/ESSBASE0///Info(1051001)
Received client request: Get Security Mode (from user [hyperion])
[Tue Mar 18 15:12:39 2008]Local/ESSBASE0///Info(1051001)
Received client request: Set Application Id For Planning (from user [hyperion])
[Tue Mar 18 15:12:39 2008]Local/ESSBASE0///Info(1051001)
Received client request: Get Security Mode (from user [hyperion])
[Tue Mar 18 15:12:39 2008]Local/ESSBASE0///Info(1051001)
Received client request: Get Security Mode (from user [hyperion])
[Tue Mar 18 15:12:39 2008]Local/ESSBASE0///Info(1051001)
Received client request: Re-Sync User/Group with Single application (from user [hyperion])
[Tue Mar 18 15:12:39 2008]Local/ESSBASE0///Info(1051590)
Synchronization started for user/group [MSADUser]
[Tue Mar 18 15:12:39 2008]Local/ESSBASE0///Info(1051591)
Synchronization completed for user/group [MSADUser]
[Tue Mar 18 15:12:39 2008]Local/ESSBASE0///Error(1051013)
User/group MSADUser does not exist
[Tue Mar 18 15:12:39 2008]Local/ESSBASE0///Warning(1051003)
Error 1051013 processing request [Re-Sync User/Group with Single application] - disconnecting
---------- When accessing through XL Addin, the foll is displayed:
[Tue Mar 18 16:49:09 2008]Local/ESSBASE0///Error(1051012)
User MSADUser does not exist
[Tue Mar 18 16:49:09 2008]Local/ESSBASE0///Warning(1051003)
Error 1051012 processing request [Login] - disconnecting
Thanks !!!

Hardcode IP addresses instead of the server names in the essbase.cfg file and the Shared Services CSS.XML file for the Shared Services server references.
Restart SS/Essbase, provision an MSAD user, then do a Refresh from Shared Services in AAS.
Verify your MSAD userID then shows up as an Essbase user in AAS(Display User list for the Essbase server)
As long as the MSAD users show up in the user list, they should be working.

Error while activating DSO

Hi,
I am getting an error while activating the DSO. I am able to load the data but this occurs when I try to activate the data. I get the follwing error message
"Value "09020751987.44 " from characteristic 0REF_DOC_NO contains an error at position 15
Message no. BRAIN290
Diagnosis
Characters that have a hexadecimal display between HEX00 and HEX1F are not permitted in characteristic values. The character at position 15 is one of these characters. The value is therefore not permitted.
Note that these characters cannot be displayed and are therefore displayed as '#'. The actual character '#' has the hexadecimal display HEX23.
Procedure
Check the origin of the characteristic value. If possible, change the characteristic value in the source.
Incorrect source text in update routines and transfer routines can also cause this problem."
Any thoughts how I should correct/

Hi Tanu,
this is an error in the data loaded. If you have used PSA, then try searching for the packet containing this record using the change log table, by request id. (This step is to precisely find the position of the record in PSA).
Now delete the request from the DSO and correct the data in PSA. The issue could be a tab or a space in the reference document feild and then save the data. Reconstruct this packet from PSA and then try activating.
Subsequently let the data team/ user know about the correction in the source system as well, in order to avoid any future failures.
This should correct the issue.
regards,
Naveen.A

Error when activating 0pm_dso1

Hi,
I am getting an error when activating standard DSO 0PM_DSO1
error is as below
InfoObject 0SOURSYSTEM has to be contained in DS (required by InfoObject 0NOTIFICATN)
InfoObject 0SOURSYSTEM has to be contained in DS (required by InfoObject 0EQUIPMENT)
InfoObject 0SOURSYSTEM has to be contained in DS (required by InfoObject 0FUNCT_LOC)
Inconsistencies found while checking DataStore object 0PM_DS01
Please suggest ,
Thanks in Advance ,
Harshitha

Hi,
Thanks a lot All,
As you all mentioned i tried activating these 4 IO
but i am facing an error
like below
InfoObject 0EQUIPMENT is referenced from ZCRELOBE2, compounding cannot be changed
Characteristic 0EQUIPMENT: Navigation attribute ZCSERNR is used in ref. to char. ZCRELOBE2
InfoObject 0EQUIPMENT being used in InfoCube ZC0PM_C03 (contains data)
InfoObject 0EQUIPMENT being used in InfoCube ZCNOTITEM (contains data)
InfoObject 0EQUIPMENT being used in InfoCube ZCNOTITEM (contains data)
InfoObject 0EQUIPMENT being used in InfoCube ZCNOTITEM (contains data)
Please let me know how to resolve this type of issues
Thanks in Advance,
Harshitha

Error while Activating DSO Data

Hello
I am having a problem, I am getting an Error while activating DSO Data, Data is loaded in DSO succefully but can not be activated with this error
"Activation of M records from DataStore object 0FIAR_O03 terminated"
Thanks

Hi,
The activation would have failed due to varies reasons..
It would be a short dump,check in ST22.
check the job log in SM37 for better understanding of the issue.
Have you loaded the respective master data?
if it is a transaction data load,then the SID is checked at the time of activation and not during loading.
So if the master data is not loaded then the activation would fail.
It can also be due to the system performance at that moment.
Even if the data volume is huge ,there are chances of the activation failing..
Try repeating the activation once again.it might succeed..
Else check the logs to understand the actual issue.

Error while activating PM Business Content DSO 0PM_DS01

I am trying to activate the Business Content for PM (Plant Maintenance). I wasable to activate the cubes without any problem.
But when I tried activating the DSO 0PM_DS01, the installation is failing while activating the DSO with the message. "You are not authorised for Infosource 80PM_DS01"
Has anybody else also faced a similar error?
TIA
Abhishek

Hi,
Please stop posting multiple threads for the same post :
Unable to activate the DSO in PM Business Content
Suggest you close out one thread and just keep one active.
Cheers,
Kedar

Got one error while activating data in dso

Hi,
I am loading some data to SAP given dso 0figl_o02. while doing so i got one error with following description
Error short text : "Value "CONVERSION REVERSAL " from characteristic 0DOC_HD_TXT contains an error at position 20"
Long text : "Characters that have a hexadecimal format between HEX00 and HEX1F are not permitted in characteristic values. The 20th character is one of these characters. The value is therefore not permitted.
I dont know how to find out exactly which record has this wrong data. I checket in PSA for this record with error its not showing any of such records.
Please suggest some soluion
Thanx

Hi Sudeep,
First you need to get the values from characteristic 0DOC_HD_TXT that contains an error.
Therefore, go to the ODS/DSO contents tab through RSA1(manage) and select the first option LOGS and then you will be able to select log for Activation and then execute it.
You will no get several requests, select your relevant request which will be in red and then select Application Log at the botton of the screen, then you will be displayed with another screen there you check the date of activation is correct or not becoz by default today's date will be there.
Then you will get the log for it --> double click on the problem class which is in red for it and you will get the value for the 0DOC_HD_TXT where it has special char.
Then go to PSA select all data packets and number of records (give full number of the records transfered) and then enter. It might take sometime if you have huge data. Once you get the records then filter on the 0DOC_HD_TXT column and then give the value you copied from the log.
Then you can edit the special char (remove) or if you want that to be displayed then paste the same spl. char in RSKC and execute.
Activate it again.
Hope it helps...
Best Regards,
MK

Error with activation of DSO

Similar Messages

Maybe you are looking for