Error with ADC on Azure dcdiag report failed test Advertising
ever since I built an ADC on azure for my domain I am getting the below errors on dcdiag
Starting test: Advertising
Warning: DsGetDcName returned information for \\V2DC.V2.COM, when we
were trying to reach V2-ADC02.
SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE.
......................... V2-ADC02 failed test Advertising
Unable to connect to the NETLOGON share! (\\V2-ADC02\netlogon)
[V2-ADC02] An net use or LsaPolicy operation failed with error 67,
The network name cannot be found..
......................... V2-ADC02 failed test NetLogons
I just gave it some time and the error is gone looks like replication over the internet was slower than I thought
Similar Messages
-
DCDiag: SERVER6 failed test Advertising
This is one of quite a few errors I get after running a dcdiag on this particular domain controller:
Testing server: Default-First-Site-Name\SERVER6
Starting test: Advertising
Warning: DsGetDcName returned information for
\\server5.domain.local,
when we were trying to reach SERVER6.
SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE.
Anyone know what might be going on here? Why is information being returned for server5 instead of server6?Hi,
The error message SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE could be caused by that sysvol and netlogon share are not available.
Here are some suggestions for you:
Please open CMD then run "net share" command to confirm if they are shared successfully.
Make sure that needed ports for AD replication are not blocked in both directions and each DC has one IP address and one NIC card.
Make sure both DCs point to your DNS servers correctly. In addition, you can run ipconfig /registerdns and restart netlogon on each DC to re-register DNS records.
More detailed information, please refer to following threads:
SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE ......................... ad2008R2 failed test Advertising
http://social.technet.microsoft.com/Forums/windowsserver/en-US/6713c55f-0bc5-4d74-a18b-b867ccc9d059/server-is-not-responding-or-is-not-considered-suitable-ad2008r2-failed?forum=winserverDS
Failed Advertising Test
http://social.technet.microsoft.com/Forums/windowsserver/en-US/831c58de-003b-4b9d-9da4-7f3d992e74c6/failed-advertising-test?forum=winservergen
Best Regards,
Erin -
Hi All,
I have the environment like DC1- 2k3 Service Pack 2 which is holding FSMO roles and now I build a new ADC DC2 – 2k8 R2 OS on different location (Subnet) . After completing ADC I run the DCDAIG on DC2 where I am getting below error
Not: I tried the configuration D4 and D2 for Burflag but no luck
Note: DC1 and DC2 both are on different location with different subnet.
Any suggestion or solution please
Doing primary tests
Testing server: indai\DC2
Starting test: Advertising
Warning: DsGetDcName returned information for
\\DC1.test.com, when we were trying to reach
DC2.
SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE.
......................... DC2 failed test Advertising
Starting test: FrsEvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared.
Failing SYSVOL replication problems may cause
Group Policy problems.
Starting test: NCSecDesc
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=DomainDnsZones,DC=mh-man,DC=biz
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=ForestDnsZones,DC=mh-man,DC=biz
......................... DC2 failed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\DC2\netlogon)
[DC2] An net use or LsaPolicy operation failed with error
67, The network name cannot be found..
......................... DC2 failed test NetLogons
Starting test: SystemLog
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:40:54
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x00000032
Time Generated: 09/17/2014 16:40:54
Event String:
The time service detected a time difference of greater than 5000 milliseconds for 900 seconds. The time difference might be caused by synchronization with low-accuracy time sources or by suboptimal
network conditions. The time service is no longer synchronized and cannot provide the time to other clients or update the system clock. When a valid time stamp is received from a time service provider, the time service will correct itself.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:41:53
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:43:06
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:45:15
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:47:14
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:48:22
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:49:34
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:50:45
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:52:55
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
An error event occurred. EventID: 0x00000406
Time Generated: 09/17/2014 16:52:59
Event String:
The processing of Group Policy failed. Windows attempted to retrieve new Group Policy settings for this user or computer. Look in the details tab for error code and description. Windows will
automatically retry this operation at the next refresh cycle. Computers joined to the domain must have proper name resolution and network connectivity to a domain controller for discovery of new Group Policy objects and settings. An event will be logged when
Group Policy is successful.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:54:21
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:58:35
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:59:48
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 17:00:59
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 17:02:11
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 17:03:24
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 17:05:39
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 17:06:47
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x00000018
Time Generated: 09/17/2014 17:11:36
Event String:
Time Provider NtpClient: No valid response has been received from domain controller DC1.test.com after 8 attempts to contact it. This domain controller will be discarded as a time source and
NtpClient will attempt to discover a new domain controller from which to synchronize. The error was: The peer is unreachable.
......................... DC2 failed test SystemLog
Pradip SisodiyaHello,
please upload the following files so we could understand your setup:
ipconfig /all >c:\ipconfig.log [from each DC/DNS Server]
dcdiag /v /c /d /e /s:dcname >c:\dcdiag.log
repadmin /showrepl dc* /verbose /all /intersite >c:\repl.log ["dc* is a place holder for the starting name of the DCs if they all begin the same (if more then one DC exists)]
dnslint /ad /s "DCipaddress" (http://support.microsoft.com/kb/321045)
ADREPLSTATUS
http://www.microsoft.com/en-us/download/details.aspx?id=30005 can also be exported to file.
As the output will become large, DON'T post them into the thread, please use Windows OneDrive (https://onedrive.live.com) [with open access!]
and add the link from it here. Also the /e in dcdiag scans the complete forest, so better run it on COB.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter: -
Error With Export/Print from Crystal Report Viewer
Hello there,
I've searched through the web and SAP discussion boards with not much luck with this issue.
After working through this for some days now I've decided to look here for help.
Environment:
I have created a web Crystal Report viewer application(Developed with SBOP BI Platform 4.0 SP06 .NET SDK Runtime) that communicates with a managed Cyrstal Server 2011 SP4 (Product 14.0)
I am able to connect and authenticate with the server, retrieve a token for communication and display reports in the Crystal report Viewer successfully.
Problem:
When I attempt to export, I receive the prompt to select format and pages.
When I click export after selections most times I receive an error with the text
Unable to cast COM object of type 'System.__ComObject' to interface type 'CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{74EEBC42-6C5D-11D3-9172-00902741EE7C}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
Other times the page simply refreshes on export.
When I click to print, no print dialog is displayed the page always refreshes and no error is displayed.
No Print or Export document is ever created.
As many print/export issues seems to be related, I'm guessing this two issues are as well.
Notes:
I am utilizing the ReportClientDocument model
I am storing this in session to use as the crystal report viewer report source on postbacks
I am assigning a subset of export formats to the crystal report viewer
I am setting particular parameters as well on the report source
At this point I would appreciate every assistance I may receive on this issue
Thanks in advance,
Below is the pertinent code
Code:
<aspx>
<CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server"
AutoDataBind="true" EnableDatabaseLogonPrompt="False"
BestFitPage="False" ReuseParameterValuesOnRefresh="True"
CssClass="reportFrame" Height="1000px" Width="1100px" EnableDrillDown="False"
ToolPanelView="None" PrintMode="Pdf"/>
<Codebehind>
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using CrystalDecisions.Enterprise;
using CrystalDecisions.ReportAppServer.ClientDoc;
using CrystalDecisions.ReportAppServer.CommonObjectModel;
using CrystalDecisions.ReportAppServer.Controllers;
using CrystalDecisions.ReportAppServer.DataDefModel;
using CrystalDecisions.ReportAppServer.ReportDefModel;
using CrystalDecisions.Shared;
namespace ClassicInternalReportPage
public partial class Reports : System.Web.UI.Page
protected override void OnInit(EventArgs e)
base.OnInit(e);
if (!String.IsNullOrEmpty(Convert.ToString(Session["LogonToken"])) && !IsPostBack)
SessionMgr sessionMgr = new SessionMgr();
EnterpriseSession enterpriseSession = sessionMgr.LogonWithToken(Session["LogonToken"].ToString());
EnterpriseService reportService = enterpriseSession.GetService("RASReportFactory");
InfoStore infoStore = new InfoStore(enterpriseSession.GetService("InfoStore"));
if (reportService != null)
string queryString = String.Format("Select SI_ID, SI_NAME, SI_PARENTID From CI_INFOOBJECTS "
+ "Where SI_PROGID='CrystalEnterprise.Report' "
+ "And SI_ID = {0} "
+ "And SI_INSTANCE = 0", Request.QueryString["rId"]);
InfoObjects infoObjects = infoStore.Query(queryString);
ReportAppFactory reportFactory = (ReportAppFactory)reportService.Interface;
if (infoObjects != null && infoObjects.Count > 0)
ISCDReportClientDocument reportSource = reportFactory.OpenDocument(infoObjects[1].ID, 0);
Session["ReportClDocument"] = AssignReportParameters(reportSource) ? reportSource : null;
CrystalReportViewer1.ReportSource = Session["ReportClDocument"];
CrystalReportViewer1.DataBind();
//Viewer options
// Don't enable prompting for Live and Custom
CrystalReportViewer1.EnableParameterPrompt = !(Request.QueryString["t"] == "1" || Request.QueryString["t"] == "4");
CrystalReportViewer1.HasToggleParameterPanelButton = CrystalReportViewer1.EnableParameterPrompt;
CrystalReportViewer1.AllowedExportFormats = (int)(ViewerExportFormats.PdfFormat | ViewerExportFormats.ExcelFormat | ViewerExportFormats.XLSXFormat | ViewerExportFormats.CsvFormat);
protected void Page_Load(object sender, EventArgs e)
if (IsPostBack && CrystalReportViewer1.ReportSource == null)
CrystalReportViewer1.ReportSource = Session["ReportClDocument"];
CrystalReportViewer1.DataBind();
private bool AssignReportParameters(ISCDReportClientDocument reportSource)
bool success = true;
if (Request.QueryString["t"] == "1" || Request.QueryString["t"] == "2" || Request.QueryString["t"] == "4" )
reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "STORE", Session["storeParam"]);
if (Request.QueryString["t"] == "2")
reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "FromDate", Request.QueryString["fromdate"]);
reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "ToDate", Request.QueryString["todate"]);
else if (Request.QueryString["t"] == "3")
reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "SKU", Request.QueryString["sku"]);
else
//Unknown report type alert
success = false;
return success;Thanks Don for your response,
I'm new to the SCN spaces and my content has been moved a couple of times already.
In response to your questions
The runtime is installed on the web application server, if by that you mean the machine hosting the created .NET SDK application.
My question was whether it was also required on the Crystal Server 2011 (I.E. the main enterprise server with CMS and Report management and I guess RAS and all that). I figured this would remain untouched and queries would simply be made against it to retrieve/view reports e.t.c
If install of the SDK on Crystal Server 2011 is indeed required should I expect any interruption to any of the core services after a restart. I.E. I'm hoping that none of the SDK objects would interfere with the existing server objects (in SAP Business Objects)Reason I ask is I note that much of the SDK install directories are similar to the existing Crystal Enterprise Server 2011 (Product 14.0.0)
Is this temp folder to be manually created/configured or is it created by the application automatically to perform tasks. Or are you referring to the default C:\Windows\Temp directory and so saying that the application would try to use this for print and export tasks?Once I'm sure which I'd give the app pool user permission
Printing is to be client side but I figured by default (with the Crystal Report Viewer) it would simply pool and print from the user's printer. This is how it works with the previously used URL reporting approach (viewrpt.cwr). Therefore a user can print the document from wherever they are with their own printer.We don't intend on printing from the server machine, but are you suggesting that a printer must be installed on server (which one web or enterprise server) for any client side printing to work.
App pool is running in 32 bit mode
Initially didn't get anything useful from fiddler but I'd try and look closer on your suggestion.
It's also possible that some of my questions are a misunderstanding of APP vs RAS vs WEB, so please feel free to clarify. Currently I see the Web server as simply the created .NET SDK Application and RAS (Crystal Server 2011 e.t.c) as the existing fully established Application server which I simply pool for information.
Thank you for your patience and advice, -
Crystal Report Error in Windows Server 2012 - Load Report Failed
Badly needed help regarding the above topic. Thanks in advance for helping.
We have a web application experiencing this error after deployment in WinServer 2012 IIS 8. Previously, the application was deployed in WinServer 2003 but we dont experience any errors like this. We tried searching the net for solutions and these are the following things we've try doing so far.
- Installed Crystalreportsviewer13 64 bit in Server. After that, transferred the asp_net client folder in the IIS folder same level of our application.
- We discovered that upon browsing the asp_net client in IIS itself, error 500.24 is appearing in the server. Checked the permission for folder asp_net client. Add IIS_USR permission read execute and write on the folder and still same Load Report Failed.
- Next we tried integrating the crystalreportsviewer13 inside the application same Load Report Failed error.
- Installed Service Pack 8 for CrystalReport but to no avail.
Is there any way to get the real error behind the "Load Report Failed" error? Also, is there any other way to determine what else can be done to resolve this issue? Thanks in advance.Hi Jesse,
Use a try/catch block and see if this gives you more info:
catch (Exception ex)
MessageBox.Show("ERROR: " + ex.Message + " ;" + ex.InnerException.Message);
Response.write of course...
Make sure you have permissions set for sharing the report folder also, could be simply a permission error on the report folder.
Fiddler may give you more details also
Don -
HELP HELP error with R3Load Can't fastload LOBs failed with 3
I am doing the cutover to production, have already done sandbox, dev, and qas.
I have
1. instaled 64bit OS
2. installed sql 2005 use vbs file
3. installed ECC 6
4. exported abap from 32 bit server
5. presented export directory to 64bit server
6. started import using r3load method.
Following error occured
InitFastLoad failed with <3: Can't fastload LOBs
Please advise ASAPthe issue seemed to resolve
as the import continued and only the one error remained I allowed the import to continue
when all jobs were completed, I had a stoppage in the import with error, i hit retry and the import
went back and tried to import the LOBs objects again, which now I see may have been a resource issue because these last objects took a very long time
step SAPSSEXC_8
thank you Markus, you have always provide good advice
Maria -
Getting error with DbSl Trace: OCI-call 'olog' failed: rc = 1017
Hi,
We are working on osdbmigration, exporting from oracle to SQL Server.
When we run ./R3SETUP -f DBEXPORT.R3S getting the below error:
INFO 2011-06-10 05:17:46 R3SZCHK_IND_ORA R3ldctlDo:0
DbSl Trace: OCI-call 'olog' failed: rc = 1017
DbSl Trace: CONNECT failed with sql error 1017
We have performed allthe pre-checks successfully and can able to connect system/manager at SQL.
Regards,
Karthik.Have you followed the Note 400241 - Problems with ops$ or sapr3 connect to Oracle
-
Error with Downloaded Excel Drill Through Report
Hello! Please help!
I am having problem with the excel downloaded drill through report. Downloading the report is ok, but when I open the downloaded report, it always have this error:
View Display Error
Error generating view. Error getting cursor in GenerateHead
Error Details
Error Codes: OAMP2OPY:EHWH2A7E
A numeric value was expected (received "0").
The parent report is ok. No such error is being encountered whenever I tried to open downloaded parent report.
I am using OBIEE 10.1.3.4.1 version.
Regards,
MJ
Edited by: user13803157 on Oct 12, 2011 7:34 PM
Edited by: user13803157 on Oct 12, 2011 7:34 PMThis is a known bug. Here are the Metalink details:
Cause
This is due to bug 8394579 - Numeric Input Results in Non-Numeric Error.
Solution
Download and apply patch 9492821. This includes a fix for bug 8394579, even though it is not listed in the readme as being included.
Note that the patch is password protected. Contact Oracle Support for a password.
An alternative solution is to upgrade to OBIEE 11g.
If this was helpful, please mark the response as correct. -
Schedualed report fails within seconds, infoview ok
Windows Server 2003 R2 Standard (64) SP2
BusinessObjects XI 3.1 (any guidance on how to find the current FP applied is welcome)
Reports run through infoview complete without issues, however if the same reports are scheduled with the same parameters the report fails immediately with no processing time taken and the following error.
Unable to reconnect to the CMS D7DGHRL1.***********.com:6400. The session has been logged off or has expired. (FWM 01002)
EDIT: it looks like this started after applying the following 1538502 - The Web Intelligent server is running out of memory, your document has been closed.If the problem persists, contact your BusinessObjects administrator. (Error ERR_WIS_30285), if anyone can shed some light on which specific setting might cause this I would appreciate it. Rolling back this change might fix this issue but I will be left with the original memory problem.
Edited by: Frank Martinello on Nov 29, 2011 9:53 PM
EDIT 2: rolled back the changes from that KB article, scheduled jobs are still failing.
Edited by: Frank Martinello on Nov 30, 2011 3:12 PMThe easiest way to fine exact patch you run on server is by runnign software inventory tool. It is one of the shortcuts in Business Objects Enterprise that you can reach starting at "start" button from your server.
Are you schedulign from Java Infoview? Can you try scheduling from CMC?
There is a Kbase note (122296) on exact same behavior and here are steps to fix the issue:
1. From Central Configuration Manager, disable all the services and re-enable them.
2. Log into Central Management Console and go to the server area.
3. Go to the properties of Central Management Server, in command line parameters type -requesttimeout 3600000.
4. Save the changes and restart the server.
5. Follow the same steps for WebIntelligence Processing Server and Adapter Job Server.
6. Go to the connection server properties and increase "Ideal connection timeout" to 120, restart the server -
Load report failed - document cannot be opened in the c++ stack
I am now receiving an error when trying to load a report into the report viewer. The error I am recieving is "Load report failed ... Unsupported operation. A document processed by the JRC engine cannot be opened in the C++ stack"
<br />
Here is the error stack:
<br /><br/ />
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
<br />
Exception Text **************
CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException (0x80041811): Unsupported Operation. A document processed by the JRC engine cannot be opened in the C++ stack.
at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
--- End of inner exception stack trace ---
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
at IPAM_Reporting.frmCrystalReport.frmCrystalReport_Load(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5444 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
IPAM_Reporting
Assembly Version: 1.1.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft/IPAM%20Reporting%20System/IPAM_Reporting.exe
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
Infragistics2.Win.v10.3
Assembly Version: 10.3.20103.1000
Win32 Version: 10.3.20103.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft/IPAM%20Reporting%20System/Infragistics2.Win.v10.3.DLL
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
Infragistics2.Shared.v10.3
Assembly Version: 10.3.20103.1000
Win32 Version: 10.3.20103.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft/IPAM%20Reporting%20System/Infragistics2.Shared.v10.3.DLL
Infragistics2.Win.UltraWinExplorerBar.v10.3
Assembly Version: 10.3.20103.1000
Win32 Version: 10.3.20103.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft/IPAM%20Reporting%20System/Infragistics2.Win.UltraWinExplorerBar.v10.3.DLL
Infragistics2.Win.UltraWinToolbars.v10.3
Assembly Version: 10.3.20103.1000
Win32 Version: 10.3.20103.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft/IPAM%20Reporting%20System/Infragistics2.Win.UltraWinToolbars.v10.3.DLL
Infragistics2.Win.UltraWinDock.v10.3
Assembly Version: 10.3.20103.1000
Win32 Version: 10.3.20103.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft/IPAM%20Reporting%20System/Infragistics2.Win.UltraWinDock.v10.3.DLL
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
Infragistics2.Win.Misc.v10.3
Assembly Version: 10.3.20103.1000
Win32 Version: 10.3.20103.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft/IPAM%20Reporting%20System/Infragistics2.Win.Misc.v10.3.DLL
Accessibility
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
Infragistics2.Win.UltraWinEditors.v10.3
Assembly Version: 10.3.20103.1000
Win32 Version: 10.3.20103.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft/IPAM%20Reporting%20System/Infragistics2.Win.UltraWinEditors.v10.3.DLL
SQLDatabaseConnectivity
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft/IPAM%20Reporting%20System/SQLDatabaseConnectivity.DLL
System.Data
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
System.Transactions
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_32/System.Transactions/2.0.0.0__b77a5c561934e089/System.Transactions.dll
System.EnterpriseServices
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_32/System.EnterpriseServices/2.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
System.Core
Assembly Version: 3.5.0.0
Win32 Version: 3.5.30729.5420 built by: Win7SP1
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Core/3.5.0.0__b77a5c561934e089/System.Core.dll
CrystalDecisions.Windows.Forms
Assembly Version: 13.0.2000.0
Win32 Version: 13.0.0.99
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.Windows.Forms/13.0.2000.0__692fbea5521e1304/CrystalDecisions.Windows.Forms.dll
CrystalDecisions.Shared
Assembly Version: 13.0.2000.0
Win32 Version: 13.0.0.99
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.Shared/13.0.2000.0__692fbea5521e1304/CrystalDecisions.Shared.dll
CrystalDecisions.ReportSource
Assembly Version: 13.0.2000.0
Win32 Version: 13.0.0.99
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.ReportSource/13.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportSource.dll
log4net
Assembly Version: 1.2.10.0
Win32 Version: 1.2.10.0
CodeBase: file:///C:/Windows/assembly/GAC_32/log4net/1.2.10.0__692fbea5521e1304/log4net.dll
System.Web
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_32/System.Web/2.0.0.0__b03f5f7f11d50a3a/System.Web.dll
CrystalDecisions.CrystalReports.Engine
Assembly Version: 13.0.2000.0
Win32 Version: 13.0.0.99
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.CrystalReports.Engine/13.0.2000.0__692fbea5521e1304/CrystalDecisions.CrystalReports.Engine.dll
CrystalDecisions.ReportAppServer.CommLayer
Assembly Version: 13.0.2000.0
Win32 Version: 13.0.0.99
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.ReportAppServer.CommLayer/13.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.CommLayer.dll
CrystalDecisions.ReportAppServer.ClientDoc
Assembly Version: 13.0.2000.0
Win32 Version: 13.0.0.99
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.ReportAppServer.ClientDoc/13.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.ClientDoc.dll
CrystalDecisions.ReportAppServer.Controllers
Assembly Version: 13.0.2000.0
Win32 Version: 13.0.0.99
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.ReportAppServer.Controllers/13.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.Controllers.dll
CrystalDecisions.ReportAppServer.DataDefModel
Assembly Version: 13.0.2000.0
Win32 Version: 13.0.0.99
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.ReportAppServer.DataDefModel/13.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.DataDefModel.dll
CrystalDecisions.ReportAppServer.DataSetConversion
Assembly Version: 13.0.2000.0
Win32 Version: 13.0.0.99
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.ReportAppServer.DataSetConversion/13.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.DataSetConversion.dll
CrystalDecisions.ReportAppServer.CubeDefModel
Assembly Version: 13.0.2000.0
Win32 Version: 13.0.0.99
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.ReportAppServer.CubeDefModel/13.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.CubeDefModel.dll
CrystalDecisions.ReportAppServer.ReportDefModel
Assembly Version: 13.0.2000.0
Win32 Version: 13.0.0.99
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.ReportAppServer.ReportDefModel/13.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.ReportDefModel.dll
JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
<br /><br /><br /><br />
What could be the problem now.
Edited by: mcontri on Apr 15, 2011 6:49 PM
Edited by: mcontri on Apr 15, 2011 6:49 PM
Edited by: mcontri on Apr 15, 2011 6:51 PMHi Rama,
Please search, this issue has been discussed many times before.
For starter, see below doc.
Troubleshooting error: "Unsupported Operation. A document processed by the JRC engine cannot be opened in the C++ stack…
Thanks,
Bhushan -
CrystalDecisions.Shared.CrystalReportsException: Load report failed
Hi All,
I am new to Crystal Reports.. i want to load .rpt file from C# windows application.......i created a form and added crystal report viewer and i tried to load the .rpt file giving following error.
And this rpt file loading in anther machine in our office with same windows application. The same things are installed in my system. My OS is Windows XP, Crystal Reports 2008 with SP2 .version 12.2.0.29 , .Net 3.5 and Visual Studio 2008.
Can any one help me on this problem?
Error is
CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException (0x8004100B):
Error in File MIS-1 {C8826C27-9E57-43D4-8D53-45E46CC45725}.rpt:
Failed to logon to the Crystal Report Object Repository. at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() --- End of inner exception stack trace --- at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) at CrystalReportGeneration.Form1.btnViewData_Click(Object sender, EventArgs e) in E:\Prasad\Projects\eFile\CrystalReportGeneration\CrystalReportGeneration\Form1.cs:line 82
Inner Exception is
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) at CrystalReportGeneration.Form1.btnViewData_Click(Object sender, EventArgs e) in E:\Prasad\Projects\eFile\CrystalReportGeneration\CrystalReportGeneration\Form1.cs:line 82
OK
Advance Thanks,
Prasad SagalaMake sure you have read / write permissions on the win emp dir.
Use [Process Monitor|http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx] to trace through the loads and look for "Access Denied". Also, look for the rpt file(s), see what is happening with them.
Finally, search these forums, lot of info on the error. And search the kbase:
https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_ossnotes&query=&adv=true
Ludek
Follow us on Twitter
http://twitter.com/SAPCRNetSup -
My Report Fails once it is exported
I am using crystal reports that come with visual studio 2008 and i also tested with visual studio 2005.
I have a report and i can view any number of reports but when i export the report as pdf or any other format.The next report fails. Is there a solution to address this problem . I am just using the crystal reports viewer to show the report.
This is a windows application hence i am using the reportviewer that comes with the visual studio to show the report and using the menubar button to export the report.
The error i get is simple "LOAD REPORT FAILED"
Any Help???????????Hello,
I think the problem is once you are finished with the report you need to close and dispose your report object. I copied your code into VB .NET and I think I have most of it but not sure.
Which Viewer are you using? In your references are you using CrystalDecisions.Windows.Forms or did you try using the crviewer.dll?
Dim cr As New ReportDocument
Dim crtableLogoninfos As New TableLogOnInfos
Dim crtableLogoninfo As New TableLogOnInfo '
Dim crConnectionInfo As New ConnectionInfo
Dim CrTables As Tables
Dim CrTable As Table
cr.Load(pRptName)
'Get database connection info
With crConnectionInfo.ServerName = My.Settings.ConnectionString.Split(";")(0).Split("=")(1)
.DatabaseName = My.Settings.ConnectionString.Split(";")(1).Split("=")(1)
.UserID = My.Settings.ConnectionString.Split(";")(3).Split("=")(1)
.Password = My.Settings.ConnectionString.Split(";")(4).Split("=")(1)
End With
'Set database connection for all tables in report
CrTables = cr.Database.Tables
For Each CrTable In CrTables
crtableLogoninfo = CrTable.LogOnInfo
crtableLogoninfo.ConnectionInfo = crConnectionInfo
CrTable.ApplyLogOnInfo(crtableLogoninfo)
Next
' Loop through each section and find report objects
Dim crReportobjects As ReportObjects, crSubReportobject As SubreportObject, subReportDocument As ReportDocument
Dim crDatabase As Database
Dim crSections As Sections = cr.ReportDefinition.Sections
For Each crSection As Section In crSections
crReportobjects = crSection.ReportObjects
For Each crReportobject As ReportObject In crReportobjects
If crReportobject.Kind = ReportObjectKind.SubreportObject Then
' If a subreport is found cast as subreportobject
crSubReportobject = CType(crReportobject, SubreportObject)
'Open the sub report
subReportDocument = crSubReportobject.OpenSubreport(crSubReportobject.SubreportName)
crDatabase = subReportDocument.Database
CrTables = crDatabase.Tables
' Loop through each table in the sub report and set the connection info
For Each CrTable In CrTables
crtableLogoninfo = CrTable.LogOnInfo
crtableLogoninfo.ConnectionInfo = crConnectionInfo
CrTable.ApplyLogOnInfo(crtableLogoninfo)
Next
End If
Next
Next
If Not chkSelectClient.Checked Then
'Show all invoices
cr.RecordSelectionFormula = "{Invoices.invoice_date} in {?StartDate} to {?EndDate} and {Subject_Names.primary_name} and {Clients.billing_cycle} = {?Filter_BillingCycle}"
Else 'Invoice Number report parameter cr.SetParameterValue("Filter_InvoiceNumber", Me.cboInvoices.Text.Trim)
cr.RecordSelectionFormula = "{Subject_Names.primary_name} and {Invoices.invoice_number} = {?Filter_InvoiceNumber} and {Clients.billing_cycle} = {?Filter_BillingCycle}"
End If
'Set report parameters
cr.SetParameterValue("StartDate", Me.dtpStart.Value)
cr.SetParameterValue("EndDate", Me.dtpEnd.Value)
cr.SetParameterValue("Filter_BillingCycle", I If(Me.optMonthly.Checked, "Monthly", "Weekly"))
cr.SetParameterValue("location_id", Me.locationNameComboBox.SelectedValue cr.SetParameterValue("Billing_Contact", Billing_Contact.ToString())
'Show report
With CrystalReportViewer1
.ReportSource = cr
.Zoom(100)
.DisplayGroupTree = False
.Visible = True
.Refresh()
End With
End Sub
Thank you
Don -
Load report failed - COMException (0x8000020D)
I have a windows application project (C# and .NET 2.0) that used Crystal Report 2008. But I get error sometimes (it seems accidentally) in loading report on end user's machine. That error is:
CrystalDecisions.Shared.CrystalReportsException: Load report failed.
System.Runtime.InteropServices.COMException (0x8000020D): Unable to load report.
at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
--- End of inner exception stack trace ---
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
at SIA.DataTransfer.Forms.frmReport.GetStateReport(Int32 transferType)
I'm sure report path is correct
please guide me. How can I solve this problem?There are a few basic reasons you'd get the error:
1) App is asked to load the report from a faulty location
2) There is a read permissions issue on the folder the report is in
3) There is a read write permission issue on the temp folder
4) The app is not cleaning up the report object
5) A dll (such as a ufl) can not be loaded
It is critical that your original description is accurate:
"I get error sometimes (it seems accidentally) in loading report on end user's machine."
If that is the case (and I assume you meant you get the error on occassion, or after the app has been running for a while(?)), 1 to 3 above should not be in play.
Two questions:
What is the version of the assembly crystaldecisions.crystalreports.engine.dll referenced in your project?
Did you run procmon and did it show you anything?
Suggestions:
Use the [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility to compare the dlls loading on your development and on the user computer. Since this works on your dev computer, check for dll differences.
Ensure you are using .Close and .Dispose once you are done with each report object.
See if the Event Viewer shows any messages
Ludek -
DCDIAG " VerifyEnterpriseReferences" Failed
From last few days we are observing that our ROOT DC is giving very slow response when anybody is trying to log in. Post running all the command, we have got the below error. It's basically DCDIAG command for testing all the key services in the Domain Controller.
Starting test: VerifyEnterpriseReferences
The following problems were found while verifying various important DN
references. Note, that these problems can be reported because of
latency in replication. So follow up to resolve the following
problems, only if the same problem is reported on all DCs for a given
domain or if the problem persists after replication has had
reasonable time to replicate changes.
[1] Problem: Missing Expected Value
Base Object: CN=LostAndFoundConfig,CN=Configuration,DC=CONTOSO,DC=COM
Base Object Description: "Server Object"
Value Object Attribute: serverReference
Value Object Description: "DC Account Object"
Recommended Action: This could hamper authentication (and thus
replication, etc). Check if this server is deleted, and if so
clean up this DCs Account Object. If the problem persists and
this is not a deleted DC, authoratively restore the DSA object from
a good copy, for example the DSA on the DSA's home server.
......................... FORESTROOTDC failed testConnect to the "Configuration" partition using ADSIEdit and browse to "CN=LostAndFoundConfig,CN=Configuration,DC=CONTOSO,DC=COM" verify that the ntdsa object belongs to a demoted/deleted DC - if so delete the object(s)
Open the ADSI Edit MMC snap-in.
On the Action menu, click Connect to.
In the Connection Settings dialog box, in the Name field, enter a name for the ADSI connection. Under
Connection Point, select Select a well known Naming Context, and then select
Configuration in the drop-down menu. Click OK.
In the left pane, double-click the Configuration object, and then double-click
LostAndFoundConfig.
In the right pane, delete all objects and containers. Right-click the object or container, click
Delete, and then click Yes.
Exit ADSI Edit.
Enfo Zipper
Christoffer Andersson – Principal Advisor
http://blogs.chrisse.se - Directory Services Blog -
Hi All,
Application R12.1.3 with Shared Application Tier 2 nodes
Database : 11g R 11.2.0.2 with RAC 2 nodes with ASM
We have a concurrent program which gets fired when submitted thru API . For each order program is run once . If there are more orders it will run n number of times . At this time one request is failing with error
REP-0004:
REP-0069:
REP-57054:
But for the same failed request when we run separately(with same parameters) it is completing Normal . There is no other error in Manager Logs.
please help what can be the issue.
thanks
MappsPlease see the following docs/links.
Concurrent Processing - Concurrent Reports Failing With Errors REP-0004,REP-0082 and REP-0104 [ID 844976.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=REP-0004+AND+REP-0069+AND+REP-57054&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
If the links did not help, please enable trace/debug and see if you get more details about the error and post the contents of the log file then -- How Can Trace and Debug Be Turned On For A Concurrent Request? [ID 759389.1]
Thanks,
Hussein
Maybe you are looking for
-
How to upload the line item data for the T-CODE CO12 by using LSMW
Hi ALL i have to upload some data using the t-code CO12 by LSMW. can anybody help me where and what code i have to write to upload the multiple line-items in that. Thanks in advance.
-
Emails (POP3) that are "read" disappear from my inbox when I refresh the inbox. What's happening?
-
Template Help Re: .dwt file
Cheers All. I have done a template for the website I am working on, and my left margin is bigger than my right margin, so not sitting in center of page. My question is how do I move the template so it is even on both sides of template, Thank you for
-
Package and operation realtion in tasklist
hi, I am trying to downlaod the tasklist package and operation but not able to download the relation b/w these two.I tried PLPO and PLWP table but not able to download the relation ship. plz help rgards Neelam
-
I would like to transfer my contacts and notes from my old iphone to my new iphone on a new computer
i would like to transfer my contacts from my old iphone to my new iphone on a new computer