Error with ALV.

Hi,
I have a Screen 9000 which allow user to enter 2 table name. When execute, the ALV in Screen 9001 will display both table join together. When i press the 'back' button and key in another 2 different table name. The following Error occurs :
Error Message:
===========================================================
Runtime Errors Message_TYPE_X
Short Text
The current application triggered a termination with a short dump.
What Happened?
The current application program detected a situtation which really should not occur. Therefore, a termination with a short dump was triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
long text of error message:
Technical information about the message:
Message Class........"OK"
Number...............000
Variable 1..........." "
Variable 2..........." "
Variable 3..........." "
Variable 4..........." "
Trigger Location of Runtime Error
Program SAPLSLVC
INCLUDE LSLVC10
ROW 36
Module TYPE (FUNCTION)
Module NAME LVC_SORT_COMPLETE
=========================================================
What actually happened? How do i resolve this problem so that when i press back to re-enter different table.. it will display accordingly.
Regards,
Rayden

Hi,
Make sure you are refreshing all tables before use or after use. I think internal table is not cleared, that might cause the problem.
If you tell the source code of ALV, it will help in a better way.
ashish

Similar Messages

Run time error with ALV List

Hi,
I am Using ALV list to display data,In that when itry to display currency field it is giving run time error.
Following is the code i am using
lf_fcat-fieldname   = 'SALARYE'.
lf_fcat-tabname     = 'IT_EMPLOYEE'.
lf_fcat-col_pos     = l_cnt.
lf_fcat-emphasize   = 'X'.
lf_fcat-outputlen   = 15.
lf_fcat-ref_tabname = 'PA0008'. "<--- Ref table
lf_fcat-ref_fieldname = 'ANCUR'. "<-----ref field
lf_fcat-decimals_out = 2.
lf_fcat-seltext_l   = text-061.
append lf_fcat to it_fcat.
clear lf_fcat.

Hi,
Please check in the internal table 'IT_EMPLOYEE' , the relevant currency field as it should type compatible with your reference table field.
Thanks,
Dhruv Kumar Malhotra

Runtime Error in ALV Totaling.

Dear Friends
i am getting run time error in ALV while pressing sum button.
my alv code as follows
FIELDCATALOG-FIELDNAME   = 'DMBTR'.
FIELDCATALOG-SELTEXT_M   = 'Amount'.
FIELDCATALOG-COL_POS     = 1.
FIELDCATALOG-ref_fieldname = 'WAERS'.
FIELDCATALOG-DO_SUM      = 'X'.        "Display column total
FIELDCATALOG-ref_tabname = 'BKPF'.
FIELDCATALOG-DATATYPE     = 'CURR'.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
I have tried all possibilities but did not get the solution...
if anything left let me know
thank you
Avirat Patel

Dear Ravi
Thank you .. i am able to trace out my problem
the problem with this code
FIELDCATALOG-FIELDNAME   = 'AUGBL'.
FIELDCATALOG-SELTEXT_M   = 'Clearing Doc.No'.
FIELDCATALOG-COL_POS     = 1.
FIELDCATALOG-DO_SUM      = 'X'.        "Display column total
FIELDCATALOG-DATATYPE     = 'CURR'.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
i am getting an error with this code
how can i able to display this field in alv column.?
- Avirat Patel
*SORRY FRIENDS I HAVE NOT DECLARED MENTIONED VARIABLE IN INTERNAL TABLE ITSELF SO THAT
I AM GETTING ERROR.*
problem has been resolved..
thank you.
Edited by: Corrtech on Dec 19, 2011 1:05 PM

Problem with ALV list

Hi friends,
              I have created one program with alv list, but i am unable to add one header and footer, also i have to add one logo to the program. Plese some one tell me a easy procedure to add a header, footer and also a logo. If you can show me one with example that would be very helpful.
This is my program, plz add the necessary parts.
*& Report Y_BOM2_ALV
REPORT y_bom2_alv LINE-SIZE 350 LINE-COUNT 350.
*& Include YINCLUDE1
TABLES : mast, stko, stpo.
TYPE-POOLS : slis.
DATA : BEGIN OF iall OCCURS 10,
matnr LIKE mast-matnr,
werks LIKE mast-werks,
stlan LIKE mast-stlan,
stlal LIKE mast-stlal,
stlst LIKE stko-stlst,
posnr LIKE stpo-posnr,
idnrk LIKE stpo-idnrk,
menge LIKE stpo-menge,
meins LIKE stpo-meins,
ausch LIKE stpo-ausch,
lgort LIKE stpo-lgort,
END OF iall.
DATA : i_repid LIKE sy-repid,
i_lines LIKE sy-tabix.
DATA : int_fcat TYPE slis_t_fieldcat_alv.
SELECTION-SCREEN BEGIN OF BLOCK a1 WITH FRAME TITLE title1.
PARAMETER : p_werks LIKE mast-werks.
SELECT-OPTIONS : s_matnr FOR mast-matnr.
SELECTION-SCREEN END OF BLOCK a1.
INITIALIZATION.
title1(50) = ' Bill Of Material Input Screen '.
*& Include YINCLUDE2
START-OF-SELECTION.
SELECT mastmatnr mastwerks maststlan maststlal stko~stlst
stpoposnr stpoidnrk stpomenge stpomeins stpo~ausch
stpo~lgort INTO TABLE iall FROM stpo INNER JOIN stko ON
stpostlnr = stkostlnr INNER JOIN mast ON
stpostlnr = maststlnr WHERE mast~werks EQ
p_werks AND mast~matnr IN s_matnr.
IF sy-subrc <> 0 OR p_werks EQ ' ' OR s_matnr EQ ' '.
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
EXPORTING
titel = 'ERROR MESSAGE ( INPUT ERROR / WRONG INPUT ) '
textline1 = ' PLANT / MATERIAL Invalid or Empty '
textline2 = ' Plese enter plant no / material no again '
start_column = 20
start_row = 5.
EXIT.
ENDIF.
CLEAR i_lines.
DESCRIBE TABLE iall LINES i_lines.
IF i_lines LT 1.
WRITE: /
'No materials found.'.
EXIT.
ENDIF.
END-OF-SELECTION.
i_repid = sy-repid.
*& Include YINCLUDE3
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = i_repid
i_internal_tabname = 'IALL'
i_inclname = i_repid
CHANGING
ct_fieldcat = int_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
WRITE: /
'Returncode',
sy-subrc,
'from FUNCTION REUSE_ALV_FIELDCATALOG_MERGE'.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = i_repid
it_fieldcat = int_fcat
i_save = 'A'
TABLES
t_outtab = iall
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
WRITE: /
'Returncode',
sy-subrc,
'from FUNCTION REUSE_ALV_LIST_DISPLAY'.
ENDIF.

Hi Tapodipta,
See below example and modify ur code according to ur requirement..
REPORT ZTEST_ALV_CHECK        .
TYPE-POOLS: SLIS.
DATA: X_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
      IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
      L_LAYOUT type slis_layout_alv,
      x_events type slis_alv_event,
      it_events type SLIS_T_EVENT.
DATA: BEGIN OF ITAB OCCURS 0,
      VBELN LIKE VBAK-VBELN,
      POSNR LIKE VBAP-POSNR,
     END OF ITAB.
SELECT VBELN
       POSNR
       FROM VBAP
       UP TO 20 ROWS
       INTO TABLE ITAB.
X_FIELDCAT-FIELDNAME = 'VBELN'.
X_FIELDCAT-SELTEXT_L = 'VBELN'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 1.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'POSNR'.
X_FIELDCAT-SELTEXT_L = 'POSNR'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 2.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
x_events-NAME = SLIS_EV_END_OF_PAGE.
x_events-FORM = 'END_OF_PAGE'.
APPEND x_events TO iT_EVENTS.
CLEAR x_events .
x_events-NAME = SLIS_EV_TOP_OF_PAGE.
x_events-FORM = 'TOP_OF_PAGE'.
APPEND x_events TO iT_EVENTS.
CLEAR x_events .
x_events-NAME = slis_ev_end_of_list.
x_events-FORM = 'END_OF_LIST'.
APPEND x_events TO iT_EVENTS.
CLEAR x_events .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
    I_CALLBACK_PROGRAM       = SY-REPID
    IS_LAYOUT                = L_LAYOUT
    IT_FIELDCAT              = IT_FIELDCAT
    it_events                = it_events
TABLES
    T_OUTTAB                 = ITAB
EXCEPTIONS
    PROGRAM_ERROR            = 1
    OTHERS                   = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM TOP_OF_PAGE.
* BREAK-POINT.
WRITE: / 'TOP_OF_PAGE'.
ENDFORM.
FORM END_OF_LIST.
* BREAK-POINT.
"here you can use this for footer
WRITE: / 'FOR FOOTER'.
ENDFORM.
FORM END_OF_PAGE.
* BREAK-POINT.
WRITE: / 'END_OF_PAGE'.
ENDFORM.
Go through the link as well..
Re: ALV Footer
Hope it will solve ur problem..
<b>Reward points if useful..</b>
Thanks & Regards
ilesh 24x7

Display error in alv

Hi Experts,
can anyone suggest me that Hw can i display the errors in alv?
proper answer will be rewarded.
with regards.
sunil.

Hello Sunil
You may have a look at my Wiki posting:
[ Message Handling - Finding the Needle in the Haystack|https://wiki.sdn.sap.com/wiki/display/profile/2007/07/09/MessageHandling-FindingtheNeedleintheHaystack]
There I describe how to use the interface IF_RECA_MESSAGE_LIST in order to present application messages in a very user-friendly way (tree & ALV list).
Regards,
Uwe

Problems with ALV - Excel after changing from 640 to 710

Hi all,
first i have to say, that i have tried to set this thread in the SAPGUI-Forum,
but i didn't get any answers, therefore i try it here.
I have changed our SAPGUI from 640 to 710. Now i get problems
with ALV-GRID display.
When i change the output to EXCEL-Inplace i get the Error-Message:
0K000
View cannot be switched: Product is not installed or integration is not active.
In 640 i don't have any problems. We have ECC6.
When i use GUI710 and SAP 4.6C i don't have any problems.
Simple Test is possible with SE16N and change ALV output to excel-inplace.
Can anybody help?
Thanks.
Regards, Dieter

Hi Dieter,
we had a similar problem who we resolved installing path the GUI710_1-10002995.EXE.
Have you tried to install the patch?
Bye
Giovanni Mortati

Problems with ALV - Excel after changin from 640 to 710

Hi all,
i have changed our SAPGUI from 640 to 710. Now i get problems
with ALV-GRID display.
When i change to EXCEL-Inplace i get the Error-Message:
0K000
View cannot be switched: Product is not installed or integration is not active.
in 640 i don't have any problems.
Can anybody help?
Thanks.
Regards, Dieter

Hi Roman,
in Service.sap.com there is the first patch-level of the new GUI7.10.
i have install it without any problems.
The problem i had with excal-inplace is solved.
Regards, Dieter

RE: [Adobe Reader] when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? i

HelloThank's for your helpsI hope this document is helpfulBest Regards,
Date: Sun, 22 Jun 2014 17:10:17 -0700
From: [email protected]
To: [email protected]
Subject: when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
    when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
    created by Anoop9178 in Adobe Reader - View the full discussion
Hi,
Would it be possible for you to share the document?
Regards,
Anoop
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
     To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

thank's for reply and your help
i did the step's that you told me but i still have the same problem
                                 i have the latest v.11.0.7
i
i disable the protected mode

Odd Error with decode function in Order By Clause

I am trying to compile a procedure and can't get around an error with a dynamic order by that doesn't make much sense to me. I can repoduce the error with a plain select statment in sql plus so I can rule out a declaration error. Here is an example with 2 numeric columns and a date column.
select task_id, display_date, remark_id from task_list
where task_id > 1000
order by decode('Task_ID', 'Task_ID',Task_ID, 'Display_Date', Display_Date, 'Remark_ID',Remark_ID)
returns the error:
select task_id, display_date, remark_id from task_list
ERROR at line 1:
ORA-00932: inconsistent datatypes: expected NUMBER got DATE
I'm not sure why this error is occuring, because it doesn't even hit the Display_Date field in the Decode statment. If I take the Display_date out of the statement, it runs properly. If I change Display_Date to To_Char(Display_Date) it also runs fine, but the sorting is incorrect. Also I'm running 9.2, and do not want to use dynamic sql to build my query. Any Ideas out there as to the cause of this error?

I did find a workaround to this issue by breaking the decode statment into three separate statement, but I still think that the way it is written above should work, and may be a bug, or an error that I don't understand fully.
The Order by was rewritten like this:
order by decode(pSort, 'Task_ID',Task_ID), decode(pSort, 'Display_Date', Display_Date),
decode(pSort, 'Remark_ID',Remark_ID);
Thanks

XML Publisher Error with reports published in XML publisher

Hi All,
I am geting the following error with a report published using XML Publisher
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
The system cannot locate the resource specified. Error processing resource 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.d...
How can i Rectify this?

Hi Ark,
In order to generate a report using xml publisher. we need the following.
1. XML Data
2. Template file (RTF/PDF/..)
XML data will not be created by the template file.
We will be required to create XML data. One of the easiest way to create xml output is using the RDF. We can change the rdf output type in the concurrent program to XML.
Once the xml and the template is available, "XML Report Publisher" will be able to generate the output in the required format.
Thanks,
K.Nataraja Suthan,

Graphic problems/errors with Mainstage 3 and MBP (15'' 2011)

Hi,
I bought Mainstage 3 for my MBP (15'' 2011).
When i click con "perform" i get graphic errors.
I have the same issue with the old Mainstage version since Mountain Lion.
Also a fresh installation didn't help.
I think i'm not the only one with this issue!
I don't know how to report a bug?
Perhaps someone can help me.
(and I'm probably not the only one (see feedback in Apple Store) If you also have this problem, please add a comment with your configuration (Hardware, Software))
/forgotten ebi
So, here an example how it looks like when i click on "perform":

Same configuration,same problem. BUT I found a workaround.
Mainstage has this error with the AMD video card and/or a second monitor connected.
With a little app (http://gfx.io) it's possible to really force the MBPro to use the Intel Graphics card.
This will work only with the internal screen, not with a second screen connected.
And sometimes you need to restart, to really make the Intel video card free.
This works fine...In the meantime of a fix.

Error with an infoset in BI

HI BI gurus,
we have a problem with an infoset.
We create an infoset in RSA1 linked to a cube and a DSO.
We activate it in english without problems and I can create a query with no errors (with a english logon).
If I try to create a query in italian language the query designer show mw this error: " unexpected error - RCF_SYSTEM_FAILURE. You must restart the query designer."
Do you have any idea how to fix and solve this problem? We try to activete the infoset in Italian but the error remains.
Thanks for any help.
SB

Hi,
is italien installed as a language in your system?
Siggi

I am trying to download my photos from my iphone to my mac-iphoto. It keeps trying but about halfway through it says there is an error with a photo therefore it wont download any of my pictures or videos. It wont tell me which picture is the issue.

I took a lot of pictures and video on my recent trip to Ireland. Now I am trying to download the photos and videos from my iphone to my mac - iphoto. I have tried 3 times and each time (at a different point) I get a message telling me that there was an error with one of my photos and it wont load the pictures. Help!!

Try using Image Capture to download to a folder on the Desktop. If there's a damaged file on the iPhone that's preventing the download you can isolate it with Image Capture and then delete it from the iPhone.

Plug-in errors and dependency errors with a CAF app in DS in NW CE 7.1

I am learining to build CAF apps in Developer Studio in NW CE 7.1. Here are my steps and the errors I am getting:
Open Developer Studio
Switch to the CA perspective
File->New->Project
Choose Development Component under Development Infrastructure
Press Next
Choose Composite Application under sap.com
Choose MyComponents[demo.sap.com] under 'Local Development'
Vendor: demo.sap.com
Name: carpool
Caption: Car Pool
Language: American English
Domain: SAP-xApps
Support Component: CAF-APP (typed in, not chosen)
Press Finish
The following error appears:
Status ERROR
Plugin : com.sap.ide.metamodel.core.services.eclipse
code=0
Internal error
   Plugin name: Metamodel Core
   Internal error : com.sap.ide.metamodel.core.services.eclipse
   Class      : com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker
   Method     : computeIdeJarProperties
   Message    : C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
   Exception : java.io.FileNotFoundException: C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
java.io.FileNotFoundException: C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java:203)
at java.util.jar.JarFile.<init>(JarFile.java:132)
at java.util.jar.JarFile.<init>(JarFile.java:70)
at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.computeIdeJarProperties(ArchiveVersionChecker.java:296)
at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.doFullCheck(ArchiveVersionChecker.java:214)
at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.checkProject(ArchiveVersionChecker.java:125)
at com.sap.ide.mmservices.core.eclipse.generation.GenerationServiceEclipse.checkArchiveVersions(GenerationServiceEclipse.java:110)
at com.sap.dictionary.tools.generation.eclipse.GenerationBuilder.checkArchiveVersions(GenerationBuilder.java:335)
at com.sap.dictionary.tools.generation.eclipse.GenerationBuilder.build(GenerationBuilder.java:85)
at org.eclipse.core.internal.events.BuildManager$2.run(BuildManager.java:624)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:166)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:197)
at org.eclipse.core.internal.events.BuildManager$1.run(BuildManager.java:246)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:249)
at org.eclipse.core.internal.events.BuildManager.basicBuildLoop(BuildManager.java:302)
at org.eclipse.core.internal.events.BuildManager.build(BuildManager.java:334)
at org.eclipse.core.internal.events.AutoBuildJob.doBuild(AutoBuildJob.java:137)
at org.eclipse.core.internal.events.AutoBuildJob.run(AutoBuildJob.java:235)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
I do not think I missed anything installing NW CE 7.1, but this error makes me think that some plug-in was erroneously left out of the install.
Incidentally, I can continue onward and build an app (this is obviously a tutorial), but when I try to deploy I get the following error:
The deployment of the archive failed with an exception!
([ERROR CODE DPL.DCAPI.1027]) DependenciesResolvingException.
Reason:[ERROR CODE DPL.DC.3033] An unresolved dependencies error
occurred while sorting the deployment batch items regarding the
dependencies.;nested exception is:
com.sap.engine.services.dc.cm.deploy.sdu_deps_resolver.UnresolvedDepen
denciesException:[ERROR CODE DPL.DC.3437]Unresolved dependencies
found for the following deployment items:
1. Component: name:'carpool~ear',vendor:'my.company',location:
'localDevelopment',version:'20080501110329',software type: 'J2EE',
dependencies:'[name:'cafruntimeear',vendor:'sap.com',name:
'cafcoreear',vendor:'sap.com']
Unresolved dependency:
name:'cafruntimeear',vendor:'sap.com'          (not found in the admitted
batch items and the repository)
Unresolved dependency:
name:'cafcoreear',vendor:'sap.com'          (not found in the admitted
batch items and the repository)
Please check the error log for further informations.
Again, this looks like I am missing some components.
Any assistance is greatly appreciated.
TB

Further developments: As you may note from the error message, DS is looking for com.sap.ide.metamodel.core.services.eclipse in both the C: and the E: drive at the same time. In fact, this file exists in the E: drive subdirectory listed, so I obviously have an error with two drive designations being concatenated. Does anyone know how I can change the lookup directory for this dependency (or any dependency)?
Thanks,
TB

PeopleSoft XML Publisher report error with java.io.FileNotFoundException

Hi,
I have created two reports using XML Publisher in Peoplesoft Financials. The two reports are not related and they were submitted for processing separately. The first report completes without any issues. The second report results in error with the following message:
09.11.17 ..(CIS_POTRPT.XML_FILE.Step03) (PeopleCode)
[012309_091118154][oracle.apps.xdo.template.FOProcessor][EXCEPTION] IOException is occurred in FOProcessor.setData(String) with 'files/cis_potrpt.xml'.
[012309_091118500][oracle.apps.xdo.template.FOProcessor][EXCEPTION] java.io.FileNotFoundException: files/cis_potrpt.xml (A file or directory in the path name does not exist.)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java(Compiled Code))
     at java.io.FileInputStream.<init>(FileInputStream.java:89)
     at oracle.apps.xdo.template.FOProcessor.getInputStream(FOProcessor.java:1316)
     at oracle.apps.xdo.template.FOProcessor.getXMLInput(FOProcessor.java:1100)
     at oracle.apps.xdo.template.FOProcessor.setData(FOProcessor.java:372)
     at com.peoplesoft.pt.xmlpublisher.PTFOProcessor.generateOutput(PTFOProcessor.java:53)
2009-01-23-09.11.18.000418 AePcdExecutePeopleCode [174] Exception logged: RC=100.
Error generating report output: (235,2309) PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:ProcessReport PCPC:51552 Statement:1153
Called from:CIS_POTRPT.XML_FILE.GBL.default.1900-01-01.Step03.OnExecute Statement:8
2009-01-23-09.11.18.000617 DoStepActions [1797] Exception logged: RC=100.
Process 598607 ABENDED at Step CIS_POTRPT.XML_FILE.Step03 (PeopleCode) -- RC = 24 (108,524)
In the process monitor detail > view log/trace page, the xml file is accessible so the file was generated to a valid directory.
The weird thing is I was able to run this report without any issues few weeks ago although another user also ran into same error. The PeopleCode step that has been identified is essentially same in the two reports. I checked the app server and the directory does exist as well as the xml files for the two reports. The problem does not occur in test environment, just in production. Any help would be appreciated.

We encounter the same problem. Did you get the answer for this issue? Thanks in advance.

Error with ALV.

Similar Messages

Maybe you are looking for