Error with bounced projects

Hi,
I finished a project with just one long audio file (69 minutes), I used the (new Logic 8-) compressor and the adaptive limiter as plugins on the file - not in the mix Plug In section. Then I saved it, and I bounced it. I can open this bounced (and thus processed) version, still untracked.
Then I added the neccessary 13 tracks on the places they needed to be in the bounced, processed version of the waveburner project. When done I saved it again and closed it. When trying to open it, I get the message "bounced audio not found". The same mistake occurs with an older version of waveburner. So how can I finish this project?
Anybody else with similar problems?
Thomas

YES it's driving me MAD. I edit a track. Click bounce mix, or bounce region. I choose the proper bit depth, dithering, .aff, etc.... It appears to be bouncing, I see the file being created on the desktop of the volume I chose as the target. THEN IT VANISHES No where to be found by spotlight.
APPLE APPLE APPLE . For my next trick watch me trash the preferences. To be continued.......
Message was edited by: Rexy
Message was edited by: Rexy

Similar Messages

Eclipse errors with JavaFX project

Hi all,
I've just downloaded JavaFX and the plugin for Eclipse and am keen to get going with it. However Eclipse is saying I have errors in my project, but when I run the project it runs without errors. My guess is some build path issue but I cant figure this out.
I have the simplest of simple examples generated from the Eclipse plugin. The code is:
package mypackage;
import javafx.stage.Stage;
import javafx.scene.Scene;
*@author Andrew*
Stage {
title : "MyApp"
scene: Scene {
width: 200
height: 200
content: [ ]
}Eclipse underlines everything from Stage downwards in red and the errors it presents me with are as follows:
Description Resource Path Location Type
cannot access javafx.lang.Builtins class file for javafx.lang.Builtins not found main.fx /myfx/src/mypackage line 1 JavaFX Problem
cannot find symbol symbol : class Scene location: class mypackage.main main.fx /myfx/src/mypackage line 11 JavaFX Problem
cannot find symbol symbol : class Stage location: class mypackage.main main.fx /myfx/src/mypackage line 9 JavaFX Problem
Invalid assignment main.fx /myfx/src/mypackage line 10 JavaFX Problem
Invalid assignment main.fx /myfx/src/mypackage line 11 JavaFX Problem
.. and so on and so forth.
Like I said when I run the application from within Eclipse it gives me no errors and presents an empty dialog box with the title myapp. So Im sure the code is working.
Any help would be much appreciated :)
regards,
Andrew

Try to move eclipse directory on same drive, on which javaFX installed. And yet exclude spaces in the javaFX path.

Media error with old project

Hi All,
I'm opening an old FCP5.x project on my FCP6.0.6 system. There are 5 media files in this project. I have all of the original files, but they are now on a different HD. When opening the project FCP asks me if I want to update from an older version, I select OK. Then the dialog asks me to re-connect the missing media. The first 2 work fine, but the other three cause this warning to appear: "Some attributes of one or more of the files you have chosen do not match the attributes of the original. This may cause problems within the sequences that are dependent on them. The attributes that differed are as follows:
- Media Start and End
Would you like to try to connect them again?"
On one clip I can select try again and it moves forward. With the other 2 I have to select continue to move forward. Then those files show in the reconnect media window as having conflicts.
I've seen similar threads here, but they all seem to be due to someone using Media Manager to offline their project and then bring it back online. I didn't do that, I'm simply trying to open an older file using the same original capture files, albeit on a different hard drive.
Does anyone know how I can figure out why FCP is having problems with these files?
Thanks,
Chris

Not really sure actually. It's an hour-long project. I took a quick scan through the timeline to see if there was any audio out of sync, but most of the voice is off-camera. I'm not even sure if the cuts are correct. I do have a dvd of the original project, so I'll have to go through them simultaneously to see if they match.
In the mean time, I'm moving the capture files to an external HD and then going to plug that into my Powerbook which still have FCP5 on it. Will see if the project opens up normally there.
Thanks.
*Edit: actually just tried opening up the project on the laptop - turns out that it must actually be a FCP4 project as I got the same dialog telling me that it was an older project version.... Have to see if the mothballed iMac DV has FCP4...
Message was edited by: chris catalano

Error with HD projects premiere cs6

hello everybody,
i got the full version of premiere cs6 and it run perfect so far. but since a while, I only can work in a normal PAL project. If I will create a project in HD or export a sequence in maybe an mpg4, premiere shut down and I don´t know why.
What could I do?????
Thanks for your answers!

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
BSOD shutdowns http://forums.adobe.com/thread/1427408?tstart=0
http://blogs.adobe.com/kevinmonahan/2014/01/13/computer-shuts-down-with-premiere-pro-or-af ter-effects/

Error while creating sales order with network/project

Dear All,
we are getting the following message while creating a sales order with assembly processing with network/project system .
The standard Network used as a reference contains assignments to a standard WBS. However you have maintained WBS assignments manually.which assignment should be used?
manually maint pre-defined
reward points are assured for valuable help.
thanking you
Best regards,
R.Srinivasan

Dear Murali,
Thankyou very much for your reply.We have checked for these things which you have mentioned.
ie
Assignment of Standard WBS in the Standard network and WBS Assignment of Operastional network.We are still getting this error.
Kindly let me know What are the other possibilities for this error.
Thanking you,
Best regards,
R.Srinivasan

Opening CS4 projects in CS5 error with Canon 5D footage HELP!!!

HI Im trying out the new Premiere Pro CS5 demo and Im getting major problems opening projects.
Initially I couldnt open any of my CS4 projects but could import single sequences one at a time only, not whole projects. So I was finally working fine yesturday and today nothing opens that includes canon 5d footage . I get this error.
"This project contains a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type."
I get the same message when I import a whole project. Yet I can import a whole project 1 sequence at a time!!!
I can only create new projects which save and open but all older saved projects do not open.
thanks
remainz

Yes, this is an intermittent issue with CS5. Somehow, there’s a problem wherein certain commonly-used codecs suddenly remove/disable themselves. I had this problem, and it was driving me crazy as I couldn’t open anything, and it was just way, way too much work to recreate. So I opened up a new project. Lo and behold, the program suddenly informed me that there were codecs that needed to be installed. Codecs which, I’m sure, have been installed already, but obviously Premiere knows that they’re missing. Allowing the program to install them, and then allowing it to quit itself, and then reopening the program again enabled Premiere to open all of my projects again.

Failed to provision site PWA with error: Microsoft.Office.Project.Server.Administration.ProvisionException: To create databases we need dbcreator and securityadmin server roles on servers.

I'm getting the following errors while trying to provision a PS 2010 PWA on our SharePoint 2010 farm. Our PS instance has been working for a while now, and houses two other PWAs. But today,
when trying to create this one, I get "Failed - see the Application event Log" and the following in the Event Viewer:
Log Name: Application
Source: Microsoft-SharePoint Products-Project Server
Date: 4/2/2014 2:09:08 PM
Event ID: 6980
Task Category: Provisioning
Level: Error
Keywords:
User: DOMAIN\DB_Access
Computer: server
Description:
Provisioning 'PWA/SDN': To create databases we need dbcreator and securityadmin server roles on servers 'DB1' and 'DB1'.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-Project Server" Guid="{b2178104-1b5b-4c20-8c8f-960678ced9e5}" />
<EventID>6980</EventID>
<Version>14</Version>
<Level>2</Level>
<Task>20</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-04-02T19:09:08.225Z" />
<EventRecordID>1676727</EventRecordID>
<Correlation ActivityID="{90131653-B0A4-4FAF-A43C-7DF07CBC3332}" />
<Execution ProcessID="11040" ThreadID="12384" />
<Channel>Application</Channel>
<Computer>sharepoint</Computer>
<Security UserID="S-1-5-21-2280669542-4145173436-3058324265-4222" />
</System>
<EventData>
<Data Name="string0">PWA/SDN</Data>
<Data Name="string1">DB1</Data>
<Data Name="string2">DB1</Data>
</EventData>
</Event>
Log Name: Application
Source: Microsoft-SharePoint Products-Project Server
Date: 4/2/2014 2:09:08 PM
Event ID: 6993
Task Category: Provisioning
Level: Error
Keywords:
User: DOMAIN\DB_Access
Computer: sharepoint
Description:
Provisioning 'PWA/SDN': Failed to provision databases. An exception occurred: To create databases we need dbcreator and securityadmin server roles on servers..
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-Project Server" Guid="{b2178104-1b5b-4c20-8c8f-960678ced9e5}" />
<EventID>6993</EventID>
<Version>14</Version>
<Level>2</Level>
<Task>20</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-04-02T19:09:08.225Z" />
<EventRecordID>1676728</EventRecordID>
<Correlation ActivityID="{90131653-B0A4-4FAF-A43C-7DF07CBC3332}" />
<Execution ProcessID="11040" ThreadID="12384" />
<Channel>Application</Channel>
<Computer>sharepoint</Computer>
<Security UserID="S-1-5-21-2280669542-4145173436-3058324265-4222" />
</System>
<EventData>
<Data Name="string0">PWA/SDN</Data>
<Data Name="string1">To create databases we need dbcreator and securityadmin server roles on servers.</Data>
</EventData>
</Event>
Log Name: Application
Source: Microsoft-SharePoint Products-Project Server
Date: 4/2/2014 2:09:08 PM
Event ID: 6958
Task Category: Provisioning
Level: Error
Keywords:
User: DOMAIN\DB_Access
Computer: sharepoint
Description:
Provisioning 'PWA/SDN': Database provisioning failed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-Project Server" Guid="{b2178104-1b5b-4c20-8c8f-960678ced9e5}" />
<EventID>6958</EventID>
<Version>14</Version>
<Level>2</Level>
<Task>20</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-04-02T19:09:08.225Z" />
<EventRecordID>1676729</EventRecordID>
<Correlation ActivityID="{90131653-B0A4-4FAF-A43C-7DF07CBC3332}" />
<Execution ProcessID="11040" ThreadID="12384" />
<Channel>Application</Channel>
<Computer>sharepoint</Computer>
<Security UserID="S-1-5-21-2280669542-4145173436-3058324265-4222" />
</System>
<EventData>
<Data Name="string0">PWA/SDN</Data>
</EventData>
</Event>
Log Name: Application
Source: Microsoft-SharePoint Products-Project Server
Date: 4/2/2014 2:09:08 PM
Event ID: 6971
Task Category: Provisioning
Level: Error
Keywords:
User: DOMAIN\DB_Access
Computer: sharepoint
Description:
Failed to provision site PWA/SDN with error: Microsoft.Office.Project.Server.Administration.ProvisionException: Failed to provision databases. ---> Microsoft.Office.Project.Server.Administration.ProvisionException: To create databases we need dbcreator and
securityadmin server roles on servers.
at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureDatabases(ProjectProvisionSettings provset, SPSite pwaSite, String adminName, String adminEmail, ProjectDatabaseStateType& originalDatabaseState, Guid& adminGuid)
--- End of inner exception stack trace ---
at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureDatabases(ProjectProvisionSettings provset, SPSite pwaSite, String adminName, String adminEmail, ProjectDatabaseStateType& originalDatabaseState, Guid& adminGuid)
at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.CreateSite(ProjectProvisionSettings provset)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-Project Server" Guid="{b2178104-1b5b-4c20-8c8f-960678ced9e5}" />
<EventID>6971</EventID>
<Version>14</Version>
<Level>2</Level>
<Task>20</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-04-02T19:09:08.226Z" />
<EventRecordID>1676730</EventRecordID>
<Correlation ActivityID="{90131653-B0A4-4FAF-A43C-7DF07CBC3332}" />
<Execution ProcessID="11040" ThreadID="12384" />
<Channel>Application</Channel>
<Computer>sharepoint</Computer>
<Security UserID="S-1-5-21-2280669542-4145173436-3058324265-4222" />
</System>
<EventData>
<Data Name="string0">PWA/SDN</Data>
<Data Name="string1">Microsoft.Office.Project.Server.Administration.ProvisionException: Failed to provision databases. ---> Microsoft.Office.Project.Server.Administration.ProvisionException: To create databases we need dbcreator and securityadmin
server roles on servers.
at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureDatabases(ProjectProvisionSettings provset, SPSite pwaSite, String adminName, String adminEmail, ProjectDatabaseStateType& originalDatabaseState, Guid& adminGuid)
--- End of inner exception stack trace ---
at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureDatabases(ProjectProvisionSettings provset, SPSite pwaSite, String adminName, String adminEmail, ProjectDatabaseStateType& originalDatabaseState, Guid& adminGuid)
at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.CreateSite(ProjectProvisionSettings provset)</Data>
</EventData>
</Event>
Anybody ever get any events like this before? I'm not finding much or nothing on Google or on other forums, so I thought I would run it past and see if anyone has experienced anything of a similar
nature. And yes, the farm account obviously has creator/secadmin permissions, at this point of our deployment....
I look forward to any and all feedback. Thanks and good afternoon!

I figured out the answer to this myself. For those few who might run into something akin to my error...
During the off-hours of where I work, I re-applied the farm account credentials to all dB server VM SQL services that had the account for a log-on (i.e., MSSQLSERVER, SQLSERVERAGENT, etc.) as well as all SharePoint services on our WFE/App Server VM (a two
server farm is what we host), in that order. Then I rebooted the dB server first, followed by the SharePoint server. Upon coming back, everything was working fine again. I was able to provision a site, no probelm, and it seemed to even be a little snappier
when doing so.
One note: doing this procedure gave me a "One or more services have started or stopped unexpectedly" error in the Health Analyzer, for the SPTimerV4 service. When you get this, simply enter into the item and click on "Reanalyze Now;" this will quickly clear
the error out of the Analyzer, and all should be right with the world! :)

Journal Entry Error: -10([AJDT], line 4 with incoherent project/pl)

Hi,
A client is getting the above error on two different databases, one when doing a direct journal entry and the other while doing depreciation run. They are using projects and these have correctly been defined. Running on B1 2005 PL 11.
Has anyone ever come across this problem? Any suggestions/solution?
Regards,
Ann Muhoro.

From your error message: line 4 with incoherent project/pl, I would assume some of projects had been changed. Dig into the specific line detail to find anything different comparing with the current project.

Rhsnippet.apj Error with RoboHTML 11 Project on Network

I have an RH 11 project on a network drive. The project has 485 snippets. When adding or modifying snippets I get the following error:
An error occurred while trying to read data from <n:\roboHelp Projects\\rhsnippet.apj <1>.
When I open the rhsnippet.apj file, the file is truncated like this:
<file>
<name>mysnippet.hts</name>
<comments></comments
It seems that RoboHelp cannot complete writing to the APJ file.
After closing and reopening the project, I then get a message saying the cpd is corrupt. After deleting the cpd and reopening the project, I still get a message saying the project is corrupt.
The only way I have found to fix the project is to move the project back to a local drive, delete the cpd, delete the rhsnippet.apj file and re-import all the snippets.
I have seen a similar issue which was resolved by moving to another network drive. I moved my project to another network drive but the issue still occurred.
rhsnippet.apj Error with RoboHTML 10 Project on Network
My experience with R10 R11 projects on a network drive has been problematic, despite Adobes assertion that R11 and R10 projects now work on network drives. For example, Adobe support confirmed that RoboHelp does not support projects on a network drive that uses DFS (Distributed File System). I have found that large projects seem to be problematic on network drives.
I suspect that part of this issue is the large amount of snippets I have, as other projects on the network drive don't appear to have this issue as they do not contain a large amount of snippets.
If anybody else has experienced a similar issue with projects on a network drive related to snippets I'd be grateful for some advice.

Thanks for the advice Peter, but deleting the CPD does not fix the issue. I have 500 snippets because I have 500 fields (and growing all the time) to document that can appear in multiple reports and also require that each field is documented separately. So although I seem to be pushing the envelope with the amount of snippets, I am grateful for the existence of snippets because trying to document this without snippets would be a nightmare!
One thing that annoys me is that you cannot apply a style sheet to multiple snippets at the same time. At least I have not found a way. Is there a way of doing this – short of editing the HTML for each snippet individually? I will add this to a feature request for RoboHelp as well as log a bug report with Adobe.

After mixing a project i select bounce and burn the disc that is burned plays on any cd player but when i try to burn the wav or mp3 file that was created the resulting disc will only play in a computer this also happens with video projects help please

after mixing a project i select bounce and burn the disc that is burned plays on any cd player but when i try to burn the wav or mp3 file that was created the resulting disc will only play in a computer this also happens with video projects help please are there any settings i need to alter as it seems the wav or mp3 file i ceated is being converted to a data file somewhere between the folder and disc drive

Same thing for a movie file.. If you want to play back the movie via a DVD and a DVD player you must create a Movie DVD and not just burn files to a data DVD... as Data DVDs are just storage devices for files and therefore will only work with computers...
Movie DVDs are special formats that include things like menus and special file formats.. so they can playback via a DVD Player...
You will need a 3rd party DVD Burning app like Toast which is what i actually use.... or the more popular DVD Creator app...to create and then burn a Movie DVD that will playback on a DVD Player....
https://answers.yahoo.com/question/index?qid=20101220205435AA70beb

Please help with "Error writing the project file. The specified module could not be found." error.

I am a student. I've been trying to install and use Visual Studio 2013 Professional for three weeks now and I cannot get it to work. I am now two weeks behind in my Visual Basic class. I've installed, uninstalled, ran the repair option...
I've tried everything I know how to do. I just spent 45 minutes on the phone with Microsoft, was transferred four times and finally told I will have to use the forums to find an answer. I'm almost completely out of patience with this.
I got the software through the Dream Spark program as a student. I installed it with the web installer and it appeared to install fine. When I try to create a new project, I get the error: "Error writing the project file. The
specified module could not be found."
When I exit the application, I also get: "The automatically saved settings file 'c:\users\user\documents\visual studio 2013\Settings\CurrentSettings-2015-02-02.vssettings' is not available for write. You can change this file on the 'Import
and Export Settings' Tools Options page."
Please tell me you can help.

Hi,
could you please try the points mentioned here:
http://social.msdn.microsoft.com/Forums/en-US/vssetup/thread/0376db8f-4761-4ae5-9af2-98c53216318a#VS_IDE_unexpected_problems to eliminate the possible cause of your issue?
Please update the result in the forum after you try the method above!
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

FreeRTOS BSP project XAPP1026 errors with SDK2015.1 and 2015.2

HI there,
I tried to use SDK2015.1 to generate the freeRTOS bsp with the repository from xilinx.
https://secure.xilinx.com/webreg/clickthrough.do?cid=107743&license=RefDesLicense&filename=xapp1026.zip&languageID=1
But if the BSP is generated by SDK2014.4 or older versions, it works well.
Hereby the console msgs FYI as well.
Any idea?
thx
Sam

Thanks for your reply.
But these are the errors in BSP project, which is generated by SDK automatically. If adding these include files in the BSP project manually, these revisions may be deleted when the BSP project is regenerated in some situations.
I checked the xil_types.h file in the standlone BSP project, which is generated by SDK as well.
There are type definitions, like:
#if !defined(LONG) || !defined(ULONG)
typedef long LONG;
typedef unsigned long ULONG;
#endif
But the xil_types.h file in freeRTOS BSP doesn't include these type definitions. I tried to add these definitions manually into xil_types.h file, but SDK erases the code automatically after compilation.
thx
Sam

Plug-in errors and dependency errors with a CAF app in DS in NW CE 7.1

I am learining to build CAF apps in Developer Studio in NW CE 7.1. Here are my steps and the errors I am getting:
Open Developer Studio
Switch to the CA perspective
File->New->Project
Choose Development Component under Development Infrastructure
Press Next
Choose Composite Application under sap.com
Choose MyComponents[demo.sap.com] under 'Local Development'
Vendor: demo.sap.com
Name: carpool
Caption: Car Pool
Language: American English
Domain: SAP-xApps
Support Component: CAF-APP (typed in, not chosen)
Press Finish
The following error appears:
Status ERROR
Plugin : com.sap.ide.metamodel.core.services.eclipse
code=0
Internal error
   Plugin name: Metamodel Core
   Internal error : com.sap.ide.metamodel.core.services.eclipse
   Class      : com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker
   Method     : computeIdeJarProperties
   Message    : C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
   Exception : java.io.FileNotFoundException: C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
java.io.FileNotFoundException: C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java:203)
at java.util.jar.JarFile.<init>(JarFile.java:132)
at java.util.jar.JarFile.<init>(JarFile.java:70)
at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.computeIdeJarProperties(ArchiveVersionChecker.java:296)
at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.doFullCheck(ArchiveVersionChecker.java:214)
at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.checkProject(ArchiveVersionChecker.java:125)
at com.sap.ide.mmservices.core.eclipse.generation.GenerationServiceEclipse.checkArchiveVersions(GenerationServiceEclipse.java:110)
at com.sap.dictionary.tools.generation.eclipse.GenerationBuilder.checkArchiveVersions(GenerationBuilder.java:335)
at com.sap.dictionary.tools.generation.eclipse.GenerationBuilder.build(GenerationBuilder.java:85)
at org.eclipse.core.internal.events.BuildManager$2.run(BuildManager.java:624)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:166)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:197)
at org.eclipse.core.internal.events.BuildManager$1.run(BuildManager.java:246)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:249)
at org.eclipse.core.internal.events.BuildManager.basicBuildLoop(BuildManager.java:302)
at org.eclipse.core.internal.events.BuildManager.build(BuildManager.java:334)
at org.eclipse.core.internal.events.AutoBuildJob.doBuild(AutoBuildJob.java:137)
at org.eclipse.core.internal.events.AutoBuildJob.run(AutoBuildJob.java:235)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
I do not think I missed anything installing NW CE 7.1, but this error makes me think that some plug-in was erroneously left out of the install.
Incidentally, I can continue onward and build an app (this is obviously a tutorial), but when I try to deploy I get the following error:
The deployment of the archive failed with an exception!
([ERROR CODE DPL.DCAPI.1027]) DependenciesResolvingException.
Reason:[ERROR CODE DPL.DC.3033] An unresolved dependencies error
occurred while sorting the deployment batch items regarding the
dependencies.;nested exception is:
com.sap.engine.services.dc.cm.deploy.sdu_deps_resolver.UnresolvedDepen
denciesException:[ERROR CODE DPL.DC.3437]Unresolved dependencies
found for the following deployment items:
1. Component: name:'carpool~ear',vendor:'my.company',location:
'localDevelopment',version:'20080501110329',software type: 'J2EE',
dependencies:'[name:'cafruntimeear',vendor:'sap.com',name:
'cafcoreear',vendor:'sap.com']
Unresolved dependency:
name:'cafruntimeear',vendor:'sap.com'          (not found in the admitted
batch items and the repository)
Unresolved dependency:
name:'cafcoreear',vendor:'sap.com'          (not found in the admitted
batch items and the repository)
Please check the error log for further informations.
Again, this looks like I am missing some components.
Any assistance is greatly appreciated.
TB

Further developments: As you may note from the error message, DS is looking for com.sap.ide.metamodel.core.services.eclipse in both the C: and the E: drive at the same time. In fact, this file exists in the E: drive subdirectory listed, so I obviously have an error with two drive designations being concatenated. Does anyone know how I can change the lookup directory for this dependency (or any dependency)?
Thanks,
TB

Error: Cannot open project file

Does that error message mean I am trying to open a project file that was created with a version of FCP that is later than what I operate with?
Also, where did the FCP FAQ section go?
PowerMac G4 desky 867MHz 1GB RAM Mac OS X (10.2.x) FCP 3.0.4

Are you trying to open a project created by a later version? (using FCP 4.5 to open a project created in FCP 5 for example)
If so, it can't ge done. The best you can do is export an XML of the cut (only the cut) that the previous version can then import.
#27 Getting a FCP 5 project to open in FCP 4.5
Shane's Stock Answer #27: How do I export my FCP 5 project so that someone can work with it in FCP 4.5?
Final Cut Pro 5 projects are not backwards compatible. What that means is that a project created in FCP 5 cannot be opened by previous versions. The previous version cannot recognize the formatting and code of the newer version. You can go from FCP 4.5 5o 5, but it will reformat your project file, so if you want to have a 4.5 version best to duplicate it and convert the duplicate.
You can, however, export the sequence from FCP 5 so that it will open in FCP 4.5 if you follow these steps:
1) Select all in the Browser
2) Choose File>Export>XML
3) Make sure you choose XML version 1 in the following dialog box
4) Launch FCP4.5 and create a new project
5) With that project's Browser open and active, import the XML
For an in-depth explaination, read this:
http://www.lafcpug.org/Tutorials/basicfcp5_to4.html
Shane

App-V 5 SP1: Error with SAP GUI 7.3

Hallo!
We work on a project to use SAP GUI 7.3 with latest fixes with App-V 5. This works fine so far with the exception of only one transaction in SAP - SWDD. This windows shows no icons on top. After waiting for a while this transaction stops working and SAP
GUI crashes. SAP support says it's an error with App-V. So we tried to find some error with process monitor. We are able to see many of these errors:
Date & Time: 19.11.2013 11:02:26
Event Class: Registry
Operation: RegOpenKey
Result: NAME NOT FOUND
Path: HKU\S-1-5-21-1393060369-1102717077-1881041405-25977_CLASSES\AppV\Client\Packages\4782139E-FD11-4C4D-84FB-57E849A8B823\Registry\Machine\Software\Classes\CLSID\{3BE786A0-0366-4F5C-9434-25CF162E475E}\ExtendedErrors
TID: 10504
Duration: 0.0000049
Desired Access: Maximum Allowed
Date & Time: 19.11.2013 11:02:31
Event Class: Registry
Operation: RegEnumKey
Result: BUFFER TOO SMALL
Path: HKCR\CLSID\{3BE786A0-0366-4F5C-9434-25CF162E475E}\ExtendedErrors
TID: 10504
Duration: 0.0000021
Index: 0
Length: 0
Date & Time: 19.11.2013 11:02:31
Event Class: Registry
Operation: RegOpenKey
Result: NAME NOT FOUND
Path: HKLM\SOFTWARE\Microsoft\AppV\Client\Packages\4782139E-FD11-4C4D-84FB-57E849A8B823\Versions\E7BFC8A3-BB43-4739-A7A8-604AA3A68E84\Registry\Machine\Software\Classes\CLSID\{3BE786A0-0366-4F5C-9434-25CF162E475E}\ExtendedErrors
TID: 10504
Duration: 0.0000123
Desired Access: Maximum Allowed
There are hundreds of these entries. What are these NAME NOT FOUND errors? Did anyone of you successful sequence SAP Gui 7.3 with App-V 5?
Thanks for help.
Dietmar

Hello,
See this topic which explains BUFFER TO SMALL.
http://blogs.technet.com/b/markrussinovich/archive/2005/05/17/buffer-overflows.aspx
The Name not found indicates that it is looking for a registry key (location is the path) and not finding it. That may not be a problem, as it usually traverses multiple locations (HKCU and / or HKLM, native and virtual..).
First question is;
On a machine with SAP installed natively - is there an entry named;
HKLM\Software\Classes\CLSID\{3BE786A0-0366-4F5C-9434-25CF162E475E}\ExtendedErrors
or
HKCU\Software\Classes\CLSID\{3BE786A0-0366-4F5C-9434-25CF162E475E}\ExtendedErrors
If yes, does it exist in the package?
Nicke Källén | The Knack| Twitter:
@Znackattack

Error with bounced projects

Similar Messages

Maybe you are looking for