Error with "Creating Transformation for Master Data"

Hi!
I have the following error, when I try to create a transformation in SAP Solution Manager.
Error analysis
Short text of error message:
Network could not be launched due to control error
Long text of error message:
Diagnosis
Network control cannot be started either because is is not installed on the front-end computer, or because the control framework is inconsistent when the function is called up. To be able to start the network graphic, you need two OCX files that are delivered with the BW Frontend.
System Response
Processing has been terminated.
Procedure
Make sure that the OCXs ICDataFlow.ocx and wdbdadpt.ocx auf are
installed on your computer. You can find notes on installing and
checking the BW Frontend by searching for SAP Notes with the
following key words:
Version, sapservX, Setup, Patch, Installation, Frontend, BW,
sapbexc.xla, checktool, wdtaocx, wdtaocx.ocx
If the front end is installed correctly but the error still occurs, contact SAP.
Procedure for System Administration
Technical information about the message:
Message class....... "RSNG"
Number.............. 001
Variable 1.......... " "
Thank you very much!
regards
Thom

It seems like probably the installation is not proper.
Or
you don't have the SAP BW Data Flow Control for Administration Workbench installed in your system
This is what i found
wdbdadpt.ocx (SAP BW Data Flow Control for Administration Workbench) is a component from the software SAP BW Data Flow Control for Administration Workbench version 3020.6.21 by SAP AG, Walldorf. wdbdadpt.ocx version 3020.6.21 has a file size of 99,216 bytes, and is most commonly found under the directory "Controls" with a creation date of January 14, 2006
Seems like some one else also got this issue
Getting short dump in BI system, transaction RSA1
Regards,
Zaheer

Similar Messages

Error while creating transformation for DSO in SAP BI

While creating a transformation for DSO in SAP BI, I got an error "Data source xxx (FS_xxx) does not exist in version A". I would like to know what this error is all about and how to resolve this issue.
Thanks.
Bhusan

Hi Bhusan,
You have to activate your datasoure to make it as an ACTIVE version.
SO in RSA1>Modelling>Datasouces--> find your datasource name and activate it first.
Then create your transformation and continue with other steps.
Hop it helps
Regards,
Arun.M.D

Error in Setting lock for Master Data Load

Hi Team,
I encounter the following error while uploading the Masterdata
"Lock NOT set for: Loading master data attributes
Attributes of characteristic 0BPARTNER are locked by terminated change run 465451241"
I Performed the following steps
1) Checked if any active jobs (change run jobs) running in the system. But no jobs running.
2) RSATTR->infoobject list-> no infoobject found
3)Tried after sometime ,but load continue to fail
Could anyone help to solve the problem
thanks
Bala

Hi Bala,
Check in SM12 if there are any locks exist with the change run number?
First check if there are any Master data loads running related to it?
Check in the Attribute change run screen if there are any change run steps are running?
Once after checking the above if no locks exist and no master data is running then check the below steps
1. Run RSA1 transaction
2. Tools -> Apply Hierarchy/Attibutes Change(or direct transaction RSATTR)... menu option
3. Click at "Monitor and Start terminated Change Runs" button (at the bottom of the screen)
4. Click "Reset Status" button at Run ID 465451241
NOTE: this is not recommended, to unlock the locks better to wait till the locks get relased.
If still the error message persists then we can use a FM in se37 in serious cases which was not recommended by SAP...
Use RSDDS_AGGR_MOD_CLOSE in se37 and execute--->there give ur failed change run no(465451241) beside I_CNSID and execute...
It releases all the locks by that change run....and continue with your further work/jobs...
Regards
KP

Caller 09 contains error messages in infopackage for master data

Hello
we are facing issue in info package some records were available in psa and then we got the job cancelled at R3 side and the short dump attached screen shot
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart

Hi,
Can you please check the extractor in RSA3.
Also try to find the record which is failing and fix the Profit Center for that record.
If you dont know exact error record, please take help from FICO guys.
Else do random loads like, if total no of records are 100
Load 50 records by giving selections. If it went fine, then go to next 50. Do loads in Binary search way.
Regards

Aggregates for master data & Line item Dimension

Hi i have question
1 Can we create Aggregate for Master Data?
2 Can we create Aggregate with Navigational Attributes?
3 Can we create Aggregate with Line Item Dimension?
4 How many dimension we can add with how many characteristics in it if we create a new Aggregate

1 Can we create Aggregate for Master Data? - No
2 Can we create Aggregate with Navigational Attributes? - No
3 Can we create Aggregate with Line Item Dimension? - No
4 How many dimension we can add with how many characteristics in it if we create a new Aggregate - You can create a maximum of 13 dimensions in the cube.You can add as many characteristics for an aggregate,adding many characteristics in the aggregate is as good as having the query fetch data from the Cube instead of the aggregates.
Aggregates are subsets infocubes derived from the main InfoCube to increase the query performance.You can create as many aggregates you want in an InfoCube.
For each aggregate,internally dimensions are created based on the selected characteristics.
Take a look at this link for detail information...
http://help.sap.com/saphelp_nw04/helpdata/en/7d/eb683cc5e8ca68e10000000a114084/content.htm

Error while creating Data Source for master data attributes

Hi BI Experts,
Well its been some time for me that I have been part of Extraction in BI.I primarily handled reporting in my last assignments.
I was trying extraction with flat files in SAP BI 7(new to sap bi 7 but very much familiar with BW3.5) but failed in the activity during master data attributes and text upload in infoobject (say IOSP_Mat).
Here is the procedure that I did after creation of characteristic IOSP_Mat.I created a source system for flat file followed by data source for Master data attributes, i selected all the parameters correctly.i.e. csv file format, data seperator as ,
and other settings, now when i am trying to look at the proposed data in the next tab using Load example data.its not showing the desired result.The columns that I have maintained in Flat File is MAT_NUMBER and MAT_NAME (with say 100 data in the file)
same is the result when I am trying to load the text data too columns maintained are
(LANGUAGE MAT_NUMBER Short Description)(same 100 data).
now i used to rsa1old transaction to upload the file using 3.5 version.i created info source for master data/text/hierarchies for IOSP_Mat
now when trying to upload it using info package for master and text data,I observe its(the data) not maintained in the characteristic IOSP_Mat.
When I monitored ,I figured the data has not been even uploaded to the PSA level.
Can you BI experts tell me the answer for this.
Thanks,
Srijith

apologies to all of you for late response,
was busy with some other activities.
I don't remember the exact message,but I remember it was not loaded to even the PSA level.I will try it again and post the exact message.
Thanks again for your quick response.
Once again sorry to all of you for my late response
Thanks,
Sri

Error handling for master data with direct update

Hi guys,
For master data with flexible update, error handling can be defined in InfoPackege, and if the load is performed via PSA there are several options - clear so far. But what about direct update...
But my specific question is: If an erroneous record (e.g invalid characters) occur in a master data load using direct update, this will set the request to red. But what does this mean in terms of what happens to the other records of the request (which are correct) are they written to the master data tables, so that they can be present once the masterdata is activated, or are nothing written to masterdata tables if a single record is erroneous???
Many thanks,
/ Christian

Hi Christian -
Difference between flexible upload & Direct upload is that direct upload does not have Update Rules, direct upload will have PSA as usual & you can do testing in PSA.
second part when you load master data - if error occurs all the records for that request no will be status error so activation will not have any impact on it i.e. no new records from failed load will be available.
hope it helps
regards
Vikash

Error in creating RSDS using transfer rules for master data datasources

Hi ,
when i am creating the transfermations(RSDS) using transfer rules for master data datasources while i want to migrate datasource.it is giving the error message saying that INITIAL ERROR OCCURED DURING GENERATION OF THE TRANSFERMATION.AND in the taskbar it is giving the message LOG IS BEING LOADED.
MY QUESTION IS HOW CAN WE SEE THE LOG? AND
PLEASE GIVE ME THE STEPS TO MIGRATE MASTER DATASOURCES.
THANKS IN ADVANCE .

Hi Ankit,
Yoy have to load data to the cube.For that you need update rules.
Steps to load data to the cube
1.Replicate the datasource.
2.Assign Infosource
3.Create transfer rules
4.Maintain the update rules to the cube.
5.Right click on the datasource and schedule an infopackage for it.
Execute the Infopackage and pull the data to the cube.
Hope this helps
Regards
Karthik

Error : Concatenated values used in documents for master data

Hi Experts,
I am trying to add one characteristics as compounding characteristics to my master data info object.
previously 'Document property' option was checked for the infoobject. so i unchecked it, as it was not allowing me to add the compounding characterisitcs.
After doing the changes, when I am trying to save, its throwing error as 'Concatenated values used in documents for master data'.
Can anyone please help me with what exactly does it mean and what would be the solution to remove this error.
Thanks,
Neelima
Edited by: Potnuru Neelima on Mar 1, 2011 8:39 AM
Edited by: Potnuru Neelima on Mar 1, 2011 8:40 AM
Edited by: Potnuru Neelima on Mar 1, 2011 8:41 AM

Hi All,
Just found the soultion...wanted to share this....
Actually one document was created on one of my opportunity values, which was not simply visible from edit menu -> documents.
Go to RSA1 -> documents -> master data -> and then give ur info object name -> will get all the documents maintained corresponding to it. Need to delete them.
Then compounding characteristic can be added to our info object.
Regards,
Neelima

How to create process chains for Master Data?

I need information on " how we can create process Chains for Master Data"

Hi Sachin,
http://help.sap.com/saphelp_bw33/helpdata/en/ad/6b023b6069d22ee10000000a11402f/frameset.htm
and also Modelling aspects in process chains (ppt)
https://websmp109.sap-ag.de/~sapidb/011000358700002337702003
Hope this helps.
Srini

Error while activating transformation for a infocube.

hi experts,
This is Lalitha.I am new to BI7.
I am trying to load data from flatfile into infocube.I have loaded master data successfully.while creating datasource for transactional data i am getting warning :External length specification will be ignored.
Even then I was able to load data into PSA.Now i am trying to create transformation for the infocube, but I am getting a error :Conversion type missing
and Field /BIC/IO_PRC9 must be assigned to an InfoObject
I have mentioned the infoObjects for datasource in the fields tab.
Any suggestions will be appreciated.
Thanks in advance.
regards,
Lalitha

Hi,
Some times we have to assign manually as system does not create automatically 1:1 rule in some cases which i don't know.
Click on = at transformation and you will get the window, Under assign objects you can assign required fields to target field. this will clear your second error.
For first error -
If conversion type is missed for Price object. - Did you create the Price KF with Fixed currency or 0currency. if it is 0currency, in source system you should have one extra field with the units for Price field. As per iam concerned, If it is fixed currency it should activate - delete that particular transformation and recreate it.
Thats what i used to do. i got the result.
Have a fun
Cheers,
Shrinu

Generic delta for master data

Hi All,
I am trying to create a generic delta for master data "equipment" . table in SASP is "EQUI". I am choosing ALE delta . in that I have to provide table name and "changed doc object' . when I give "equi" as table name and "aedat" (changed on ) as "changed doc object' -
it is throwing error.
also when I tried for time satmp /calday delta , the delta doesnot work when changeed are done. don't know why?
Any idea what has to be given in these fields.
Regards,
Dola
Edited by: Dola das on Mar 17, 2010 12:55 PM

Hello,
TCDOB is a table where you need to maintain entries for Generic Detla.
Please goto SE16 : enter table name TCDOB
In the selection Screen Enter Object as EQUI and check the Number Of Entries..
I guess you need to maintain the number of fields on which the change is dependent for Detla ()
I treid creating the same Datasource Using Ale Detla
It worked and saved without errors :
i have the following entries in TCDOB table
OBJECT          TABNAME
EQUI            EQKT
EQUI            EQUI
EQUI            EQUZ
EQUI            FLEET
EQUI            ILOA
Please tell me your count and entries..
so that we can discuss this Further
Also if you find if there are no entries then you can Go to SCDO tcode and maintain entries with respect to change object.
waiting for your feedback
Regards
Nitin Bhatia
Edited by: Nitin Bhatia on Mar 18, 2010 6:44 AM

DTP for Master data

Hi Guys,
How to extract master data and hierarchies from ECC into BI infoobjects?
Do we follow the same procedure for loading master/hierarchy data as for transaction data - i.e. Load into PSA and then create Transformations and DTPs to load into infoobjects? If so, what is the best approach as far as Full/Delta loads.
1. Is it ok to do a full load into PSA (using infopackage) and then do a full load always (The process chains for master data would be running nightly).
or
2. Should we have 2 infopackages (full and delta) into PSA and then multiple DTPs. (The process chains for master data would be running nightly).
Regards.

Indicator: Only Get Delta Once
Source requests of a DTP for which this indicator is set are only transferred once, even if the DTP request is deleted in the target.
Use
If this indicator is set for a delta DTP, a snapshot scenario is built.
A scenario of this type may be required if you always want an InfoProvider to contain the most up-to-date dataset for a query but the DataSource on which it is based cannot deliver a delta (new, changed or deleted data records) for technical reasons. For this type of DataSource, the current dataset for the required selection can only be transferred using a 'full update'.
In this case, a DataStore object cannot usually be used to determine the missing delta information (overwrite and creation of delta). If this is not logically possible because, for example, data is deleted in the source without delivering reverse records, you can set this indicator and perform a snapshot scenario. Only the most up-to-date request for the DataSource is retained in the InfoProvider. Earlier requests for the DataSource are deleted from the (target) InfoProvider before a new one is requested (this is done by a process in a process chain, for example). They are not transferred again during the DTP delta process. When the system determines the delta when a new DTP is generated, these earlier (source) requests are seen as 'already fetched'.
Setting this indicator ensures that the content of the InfoProvider is an exact representation of the source data.
Dependencies
Requests that need to be fetched appear with this indicator in the where-used list of the PSA request, even is they have been deleted. Instead of a traffic light you have a delete indicator.
Get Data by Request
This indicator belongs to a DTP that gets data from a DataSource or InfoPackage in delta mode.
Use
If you set this indicator, a DTP request only gets data from an individual request in the source.
This is necessary, for example, if the dataset in the source is too large to be transferred to the target in a single request.
Dependencies
If you set this indicator, note that there is a risk of a backlog: If the source receives new requests faster than the DTP can fetch them, the amount of source requests to be transferred will increase steadily.

Unable to generate "Export data source" for Master data infoobject

Hi Gurus,
I'm in BW 3.5
I need to generate "Export data source" for a master data info object.
I followed below steps:
I ticked the checkbox "Characterist. is export data source" in the master data Info object maintenance screen.
In the Infosource area, for the desired Infoobject --> Right click --> Generate export datasource --> a dialog box displays saying "The generation of DataSource was successful"
Problem:
Even after refreshing, etc.. I couldn't find the generated datasource 8**** for the above master data. I also tried to replicate the datasource from the myself source system, but couldn't find it even there. I don't know where the generated export data source is hiding ???
Could anyone please help ????
Thanks,
Venkat

Hi Venkat,
I guess that after creating an export datasource for infoobject this DS should appear in the RSA1-Source systems - MYSELF - datasource overview (with name starting with 8). Since it's a datamart, it should appear also as system generated infosource. And in this case you would be able to assign in URs of data target the appropriate infosource (make sure that in Infoproviders tab of RSA1 you have inserted your infoobject as a data target).
However, there are some bugs related to export data source. CHeck if you see you export data source in RSA6.
If you don't see it - consider applying OSS Note #816892 - "30BSP26: Export DS for master data is not generated".
Note #876845 - "30BSP29: InfoObject change: Export DataSource not adjusted" is also may be useful.
-Vikram

How can you make a field "key" in transformation rules - master data maping

Hello ,
We are in the process of creating some custom master data datasources for HR module. In this we are trying to extract fields from particular infotypes. In my situation we are pulling fields from only one table PA0032. From this table I am making a view where in I am selecting all the key fields from that table and including 2 other fields (Buliding name and room number). Now I create an ATTR master datasource with this view and check in RSA3 I see the data very good. All this is time dependent data like for Employee he might be in buliding AB room 32 first and then get moved to Buliding CD room 34. So we need to keep a history of the records. Now I replicate the DS in BW system, and create custom infoobjects for building and room no. I create an infoobject called Zworkaddress and dates I use 0VALIDTO and 0VALIDFROm. I make both the dates, bulding and room as attributes of ZWORKADDRESS. Now I map all the fields from datasource to the infoobject but field ZWORKADDRESS is on,y coming up as KEy field not the dates and subtype. Thats why I am getting only the last record not all the records of the emplyee work address.
We are using BI 7.0, so my question is how can I make the other fields as key's so that I can have all records.
Thanks in advance.

Kiran,
If you make any one time dependant system will create Dateto and date from internally. we don't need to add those.
1. for Employee, add Company Address as attribute. make this as Time Dependant. keep Subtype as Compounding key to your employer. then you will get Employee, Sub Type and Dates as key fields. you can have complete history of Employee Address change.
Hope this helps.
Nagesh Ganisetti.

Error with "Creating Transformation for Master Data"

Similar Messages

Maybe you are looking for