Error with CTC users at Solution Manager 7.1

Error during Inital Setup at Solution Manager 7.1
hello SAP Experts,
I have an error during the Initial setup Solution manager 7.1 SPS3.
I get it at SAP Solution Manager Configuration: System Preparation step 6.1 'Select SLD'.
I filled host, port and password, status of SLD server is green, then I clicked button 'Configure SLD Data Supplier...' I have get new window, to fill in passwords and options.
[SLD users|http://pokazywarka.pl/63hxan/] [SM2CTC & CTC2SM users|http://pokazywarka.pl/mcpakj/] (I logged into the system as a user SOLMAN_ADMIN, SLDDSUSER and SLDAPIUSER).
After I click button 'next' an error occurred:
Error: Execution of Function AGS_SISE_SET_CTC_STATUS ends with an error (message ID: 341, message number: No RFC authorization for function module AGS_SISE_SET_CTC_STATUS.:RFC_NO_AUTHORITY, message text: ).
I have performed tx.Solman_setup as SOLMAN_ADMIN user.
All steps before the an error are finished sucessfully.
I looking for information at Google and SAP notes but can not find anything.
Please send any advices,
Best regards
SAPFan

Hello,
Please check my last reply to this very same issue in message:
RFC No Authority error
Best regards,
Guilherme

Similar Messages

Error with Maintenance Optimizer in Solution Manager 4.0

Hi, I am configuring Solution Manager for download SP, I check marketplace and download the guide, when I try to download a SP following message show me:
"Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM)."
I go to sm59, verify RFC SAP-OSS with correct data, I found at guide following Host :
/H/54.16.44.50/S/sapdp99/H/54.62.200.35/S/
When I try press Connection Test Buttom I can not connect to SAP.
Do you know which can be my error? .....
Regards.

Hi,
Following the note 1024932
Steps to do before configre the maintance optimizer you need to configure sattilite systems in solution manager.
go to SMSY and configre R\3 systems.For these systems you need to create RFC connections and Logical comp.
http://service.sap.com/rkt-solman
for tutors and PDFs how to set up MOPZ.
Points if it helpfull
Regards
Neni

Creating a new user in solution manager?

Dear All,
How to create a new user in solution manager for creating an incident?

prathish5,
I did this in our SolMan by following the instructions provided by a SAP document called: "Service Desk VAR Setup Master Data". I got it from the Support Portal, though I can't seem to find it now so I can't provide a link at this time.
Anyway, assuming that your SolMan is already able to download your master data (and/or your customers', if you are a VAR), these are the steps suggested by the guide:
1) The message creator (aka Key User) should have the following authorization roles:
SAP_SUPPDESK_CREATE
SAP_SUPPCF_CREATE
SAP_SMWORK_BASIC
SAP_SMWORK_INCIDENT_MAN
See also SAP note 834534.
A best practice is to create a Z copy of all of these roles (use transaction PFCG), so you can manage them and change them around if you need to. Just make sure to "activate" all the authorizations of your copy of the roles:
- Open the roles in tr. PFCG;
- Select Authorizations, and choose Change authorization data;
- If you get a yellow semaphore, be sure to review the authorizations and fill them according to your security policy. You can assign global permissions for all the authorization objects by double-clicking the yellow semaphore;
- Generate the profile, then go back and save the role;
2) Following the guide, with tr. SU01 I created a Template user and called it KEY_USER (make sure the user type is actually Template) and assigned to it the Z roles you created in the step above;
3) If your SolMan is working properly, you can now use report AI_SDK_SP_GENERATE_BP (tr. SA38) to create the Business Partners and SAP users automatically. The report will log in the Support Portal and read the users which are authorized to open a SAP tickets, and create a BP and user for each of them. Use the Template user KEY_USER created in step 2 as a "Reference user" and all the new users will automatically get the correct autorizations. Also if your SAP Connect (tr. SCOT) is correctly configured, you can choose to send an automatic mail to each user, with their login and generated password.
Otherwise, you can manually create a user with transactions SU01 and BP - be sure to fill the "Identities" table here - the report AI_SDK_SP_GENERATE_BP makes all these things automatically so it's definitely your best bet.
4) Your users should now be able to log in with the SAPgui and use transaction CREATE_NOTIF to create a new message in your SolMan. Also if you have done the preparation steps correctly they should also be able to log in your Incident Manager using their browser, and open a message there and also review their past messages.
Those are just a quick insight of the steps you need to do. This is NOT an easy thing to configure, at least it wasn't for me; if you don't have a reliable guide to follow you're going to struggle: I strongly suggest you browse through the SAP documentations (also the blogs) - http://service.sap.com/xsearch is your best friend!
I hope this helps a little bit. Good luck.

Error in RFC SM_DM1CLNT800_BACK to Solution Manager System Message no. STMWFLOW025

Hi,
I am facing an issue in our Test landscape. One of our team member uninstalled solman system which was connected to all other system. CHarms was partly configured in it, so other technical team used to reach to solman for creating TR# and also release the TR from Solman. Now that the system was removed abruptly we are facing this issue and I have checked few things as below:
1) Checked for domain link entries in STMS and TP profile file, could not find anything. Nor there is any option to delete domain link as there is for create
2) Checked the RFC its was working as new Solman with the same host name and other details has been brought back with out any settings yet in it.
3) I deleted the RFC SM_DM1CLNT800_BACK in the managed system and had a backup copy created before deleting it. But still get the error "Error in RFC SM_DM1CLNT800_BACK to Solution Manager System" in more help I see this Message no. STMWFLOW025
4) Message no. STMWFLOW025 - It gives me an indication that this is something to do with the domain link and the Workflow of the TMS.
5) Checked BCOS_CUST table and it has an entry for this RFC. - Should I be removing this entry and will this resolve the issue?
I need help in resolving this issue and also if one of you could share a blog for the proper configuration removal process of a managed system from Charms and ITSM I think it would be very helpful. I could only find process and step towards configuration and not how to unconfigure the system.
Thanks in advance
Ashish

Hi
The issue is now resolved, this is how I did it.
1) Removed entries from BCOS_CUST from client 000 for OSS_MSG which was pointing to the RFC name
Then got another error:
No RFC connection to the central lock information management system.
The project lock functionality is active in the local system, but there is no RFC connection to the Solution Manager system.
2a) Ran the report in SA38 TMW_CONTROL_PROJECT_LOCK with selection for Deactivate the "project lock functionality".
2) Filled the "Deactivate Project Lock" field with "X" then clicked EXECUTE.
Problem got Solved.
Thanks
Ashish

Error - Update Product Data in Solution Manager

Hello,
We are currently downloading the Enhancement Package 4 in SOLMAN via Maintenance Optimizer, however, after choosing the Technical Usages in step 2.1, it shows an error in step 2.2 (Select OS/DB Dependent Files):
Error : Update Product Data in Solution Manager
Has anyone encountered the same problem? Would it be fine to continue on the next step after selecting the files which you need for your operating system-database combination.
Any information is highly appreciated. Thank you.

Hi Jaypee,
Check guide How-To Install EHP4- A practical guide. Solution of this problem is documented there. you can download it from http://service.sap.com/erp-ehp
Extract from this guide for this problem:
Make sure that you update the product data in SAP Solution Manager. This is described in SAP Note 1277035 which is referenced from the collective SAP Note 1122966. If you do not update the product data, you might get an error message after the stack calculation. The message text explains the problem in more detail.
Thanks
Sunny

What is a user parameter list in iMovie? I am trying to sent the movie from imovie to idvd and I keep getting an error with the user parameter list. Help?

What is a user parameter list in iMovie? I am trying to sent the movie from imovie to idvd and I keep getting an error with the user parameter list. Help?

Can you give more details? What exactly is the entire error message text? there should be an error number too. Are you trying to finalize this to an external disk?

HP QTP 11 with intergration to SAP Solution Manager version 7.1

Hi All
I am using HP QTP 11 with intergration to SAP Solution Manager version 7.1 and been stumped on this for about two days and unable to find refrence to this anywhere.
When I record a test Script and set the parameters the Test/action Parameter option does not display. the only option I have is adding the parameter to the data table.
Test/Action Parameters Selection not displayed
me.

Hi,
re-check if the 7.4 system is correctly registered in the solman SLD system.
Re-check LMDB definition for your 7.4 as JAVA system. you have to manually created the Product system. Ensure all the Component and definitions are correct.
Also do a verrification run within the LMDB. This will confirm whether all the information is correctly defined.
Please note - SLD -> LMDB -> SMSY.
So, if the first 2 don't have the correct information, you wont have much joy with smsy.
Rgds
Deepak

Error in creating Java Users during Solution Manager installation

Hi gurus,
First time trying to install SAP.
Red Hat Linux 4
Oracle
jdk 1.4.2_11
While installing the Solution Manager, it errored when it was creating Java Users, SAPJSF, J2EE_ADMIN and J2EE_GUEST.
The error description read "jco$exception: rfc_error_system_failure: invalid request".
I want to create these users manually and continue with the rest of process.
I searched lots of entries, notes, etc., but somehow, my "old" pair of eyes (and brains, too) failed to come up with something I could understand.
So, gurus, please help, help, help!!
There are no GUI version of anything installed, no Virtual Admin, no nothing like that. I have to rely on good old unix (Linux) command to do (add users) this.
Can you please, please post the instructions (step-by-step)? Please have a pity on me since this is my very first time dealing with SAP.
Thanks and regards.

Creating users manually is not the intension of the SAP Installation tool. There are other solutions available
A good starting point is to check if SELinux is enabled or disabled. I've seen lots of broken installations on Red Hat because SELinux does not allow the installer to create users. Check if in /etc/selinux/config the setting
SELINUX=disabled
is set.
I see, that you are using JDK 1.4.2_11. Is this the Sun JDK? In case you are on x86_64 you have to use the IBM JDK instead. You can download it from <a href="https://www14.software.ibm.com/webapp/iwm/web/reg/download.do?source=lxdk&S_PKG=amd64142sr7&S_TACT=105AGX05&S_CMP=JDK&lang=en_US&cp=UTF-">here</a> .
Also a new SAPINST may help. The current Installation Master CD can you download here:
http.//service.sap.com/swdc
-> Download
-> Installations and Upgrades
-> Entry by Application Group
-> SAP Technology Components
-> SAP SOLUTION MANAGER
-> SAP SOLUTION MANAGER 3.2/4.0
-> Installation and Upgrade
-> LINUX
-> ORACLE
51032006 SAP Solution M. 4.0 SR1 Inst. Master **
Best Regards,
Hannes Kuehnemund

Error at "CAF" phase of Solution Manager 4.0 SR3 installation

Hello,
When we install Solution Manager SR3 at phase 57 of 59, we get an error when sapinst configures "use type as java" CAF configuration parameters.
Line: -
ERROR
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: See output of logfile java.log: 'JSE '.
Line: -
1. sapinst.log :
ConfigMainExt state500
TYPE=A
STATE=500
INFO_SHORT=Error connecting to --http://yanbalsm:50000/ctc/ -- ConfigServlet?param=com.sap.ctc.util.OfflineConfig;PROPSHEETVALUE;CONFIGURATION=
apps/sap.com/caf~runtime~ear/appcfg/application.global.properties,KEY=WAS_MACHIN
E_ADDRESS,VALUE=yanbalsm. The provided user data might be incorrect or user migh
t be locked.
CONFIGURATION=
ERROR 2008-02-23 18:30:52.811
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: See output of logfile
java.log: 'JSE '.
ERROR 2008-02-23 18:30:52.812
FCO-00011 The step configCAFPropSheet with step key |NW_Onehost|ind|ind|ind|ind
|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Conf
iguration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_CAF|ind|ind|ind|ind|1|0|configCAFProp
Sheet was executed with status ERROR .
Line: -
the usser JSE means for J2ee_admin or other? . i looged into abap stack 001 with sap* and validate that that user is not blocked.
Line: -
2. java.log
TYPE=A
STATE=500
INFO_SHORT=Error connecting to --http://yanbalsm:50000/ctc/
-- ConfigServlet?param=com.sap.ctc.util.OfflineConfig;PROPSHEETVALUE;CONFIGURATION=
apps/sap.com/cafruntimeear/appcfg/application.global.properties,KEY=WAS_MACHIN
E_ADDRESS,VALUE=yanbalsm. The provided user data might be incorrect or user migh
t be locked.
CONFIGURATION=
Line: -
I look into http:// hostanme:port/nwa and users are ok and come from abap stack.
but when try to uses config tool or VA with de sidadm user none load , i got a error message "JAVA_HOME" not set.
i look into .j2eeenv file and is set with setenv.
Line: -
3. sapinst_dev.log .-
TRACE      2008-02-24 00:02:56.72 [iaxxejsexp.cpp:199]
           EJS_Installer::writeTraceToLogBook()
NWException thrown: nw.configError:
Java EE Engine configuration error. DIAGNOSIS: See output of logfile java.log: '
JSE '.
ERROR      2008-02-24 00:02:56.72
           CJSlibModule::writeError_impl()
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: See output of logfile
java.log: 'JSE '.
Line: -
could any one please tell me what can i check to solve this and finish my installation process.
Thank,
Daniel

Hi
We have the same problem but in AIX/Oracle
Any suggestions?

Error during final phase of solution manager install

Hello all...
I have run into a problem in the last step of the solution manager installation. From the dump below it seems to be trying to locate the jperflib and can't find it...
Any help is greatly appreciated and points will be rewarded. BTW, we have already implemented note 1094628 and it still fails...
Thanks!
Joe
WARNING    2008-05-28 14:50:46.254
           CJSlibModule::writeWarning_impl()
Execution of the command "/usr/sap/SM1/DVEBMGS00/j2ee/ctc/LaunchOfflinectc.sh" finished with return code 255. Output:
java.io.BufferedInputStream@3d66aa18
May 28, 2008 2:50:43 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Info: Start Execution of Offline CTC TemplatInstaller
May 28, 2008 2:50:43 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Info: Looking for initial Properties in file '../../../config/usagetypes.properties'
May 28, 2008 2:50:43 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Info: Loading of initial Properties-File successful
May 28, 2008 2:50:43 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Info: Selected Usages:SolManager:SolManager Java
PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
May 28, 2008 2:50:45 PM ...ProviderFactory.initalize(Context)_1! [Thread[main,5,main]] Info:
May 28, 2008 2:50:45 PM ...rovider(ConfigurationProviderFactory) [Thread[main,5,main]] Info: !BrokerRegistry.register!ConfigManagerProvider
May 28, 2008 2:50:45 PM ...DataModelRepository.registerExtension [Thread[main,5,main]] Path: entering 'registerExtension'
May 28, 2008 2:50:45 PM ...DataModelRepository.registerExtension [Thread[main,5,main]] Info: registering extensions for 'http://www.sap.com/ctc/configurationmanager'
May 28, 2008 2:50:45 PM ...DataModelRepository.registerExtension [Thread[main,5,main]] Path: entering 'registerExtension'
May 28, 2008 2:50:45 PM ...DataModelRepository.registerExtension [Thread[main,5,main]] Info: registering extensions for 'http://www.sap.com/ctc/configurationmanager'
May 28, 2008 2:50:45 PM ...onControllerImpl.startUpProcessEngine [Thread[main,5,main]] Path: entering 'startUpProcessEngine'
May 28, 2008 2:50:46 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Info: Root Processes size:10
May 28, 2008 2:50:46 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Info: Root Process for Execute AI1
May 28, 2008 2:50:46 PM          com.sap.tc.lm.ctc.PropertyLoader [Thread[main,5,main]] Info: Start Execution of Offline CTC TemplatInstaller
May 28, 2008 2:50:46 PM          com.sap.tc.lm.ctc.PropertyLoader [Thread[main,5,main]] Info: Looking for additional Properties in file '../templateconfigurator.properties'
May 28, 2008 2:50:46 PM          com.sap.tc.lm.ctc.PropertyLoader [Thread[main,5,main]] Info: Loading of additional Properties-File successful
May 28, 2008 2:50:46 PM ...ile.CULServiceReadProfileImpl.execute [Thread[main,5,main]] Path: entering 'execute'
May 28, 2008 2:50:46 PM ...ile.CULServiceReadProfileImpl.execute [Thread[main,5,main]] Path: args = input message: CTC
May 28, 2008 2:50:46 PM ...vice.validation.XMLValidator.validate [Thread[main,5,main]] Path: entering 'validate'
May 28, 2008 2:50:46 PM ...vice.validation.XMLValidator.validate [Thread[main,5,main]] Path: validating ok
May 28, 2008 2:50:46 PM ...vice.validation.XMLValidator.validate [Thread[main,5,main]] Path: entering 'validate'
May 28, 2008 2:50:46 PM ...vice.validation.XMLValidator.validate [Thread[main,5,main]] Path: validating ok
May 28, 2008 2:50:46 PM ...l.BrokerWriteProfileImpl.writeProfile [Thread[main,5,main]] Path: Entering method
May 28, 2008 2:50:46 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error:
ERROR      2008-05-28 14:50:46.255 [iaxxinscbk.cpp:282]
           abortInstallation
CJS-00030 Assertion failed: in
function NW_Call_Offline_CTC_ind_ind_ind_ind_SubComponentContainer_callOfflineCTC() {
    var nw = NWInstall.getSystem(context.get("sid"));
    var ctcDirFs = nw.getCI().getInstanceDir().concat("j2ee", "ctc");
    var ctcExeFile = installer.onWindows() ? "LaunchOfflinectc.bat" : "LaunchOfflinectc.sh";
    var ctcCall = ctcDirFs.concat(ctcExeFile);
    installer.writeTrace("CTC is in" + ctcCall);
    ASSERT(arguments.callee, ctcCall.isExisting(), "CTC executable cannot be found in " + ctcCall.toString());
    var pmgt = new ProcessMgt();
    var app = pmgt.createChildApplication(ctcCall, []);
    var userData = nw.getUsers().getAccountData(NWUsers.roles.SIDAdm);
    var user = (new AccountMgt()).getUser(userData.name);
    var env = pmgt.getProcessEnvironment();
    if (installer.onUnix()) {
        env.setUser(user);
    env.setWorkingDirectory(ctcDirFs.getNode());
    env.setEnvironmentVariable(new Property("JAVA_HOME", nw.getJavaHome().toString()));
    installer.writeTrace("For the Offline CTC Call, JAVA_HOME is set to " + env.getEnvironmentVariable("JAVA_HOME"));
    app.setEnvironment(env);
    var retval = app.run([], true);
    ASSERT(arguments.callee, retval == 0, "CTC retval is not 0 but " + retval);
    installer.writeTrace("CTC has been called in Offline Mode.");
CTC retval is not 0 but 255
ERROR      2008-05-28 14:50:46.256
           CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR      2008-05-28 14:50:46.257
FCO-00011 The step callOfflineCTC with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Call_Offline_CTC|ind|ind|ind|ind|7|0|callOfflineCTC was executed with status ERROR
Edited by: Joe Johnson on May 28, 2008 5:14 PM

I am also having this issue with the install. I have read and applied note 1094628 with no luck. posted below is my log:
WARNING 2008-08-06 13:32:18.21
Execution of the command "G:\usr\sap\SOL\DVEBMGS01\j2ee\ctc\LaunchOfflinectc.bat" finished with return code 1. Output:         1 file(s) copied.java.io.BufferedInputStream@58a17083Aug 6, 2008 1:32:14 PM   ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Info: Start Execution of Offline CTC TemplatInstallerAug 6, 2008 1:32:14 PM   ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Info: Looking for initial Properties in file '../../../config/usagetypes.properties'Aug 6, 2008 1:32:14 PM   ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Info: Loading of initial Properties-File successful Aug 6, 2008 1:32:14 PM   ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Info: Selected Usages:SolManager:SolManager JavaPerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.pathAug 6, 2008 1:32:16 PM   ...ProviderFactory.initalize(Context)_1! [Thread[main,5,main]] Info: !ConfigManagerProviderFactory.START_TRANSACTION!Aug 6, 2008 1:32:16 PM   ...rovider(ConfigurationProviderFactory) [Thread[main,5,main]] Info: !BrokerRegistry.register!ConfigManagerProviderAug 6, 2008 1:32:16 PM   ...DataModelRepository.registerExtension [Thread[main,5,main]] Path: entering 'registerExtension'Aug 6, 2008 1:32:16 PM   ...DataModelRepository.registerExtension [Thread[main,5,main]] Info: registering extensions for 'http://www.sap.com/ctc/configurationmanager'Aug 6, 2008 1:32:16 PM   ...DataModelRepository.registerExtension [Thread[main,5,main]] Path: entering 'registerExtension'Aug 6, 2008 1:32:16 PM   ...DataModelRepository.registerExtension [Thread[main,5,main]] Info: registering extensions for 'http://www.sap.com/ctc/configurationmanager'Aug 6, 2008 1:32:16 PM   ...onControllerImpl.startUpProcessEngine [Thread[main,5,main]] Path: entering 'startUpProcessEngine'Aug 6, 2008 1:32:17 PM   ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Info: Root Processes size:10Aug 6, 2008 1:32:17 PM   ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Info: Root Process for Execute AI1Aug 6, 2008 1:32:17 PM           com.sap.tc.lm.ctc.PropertyLoader [Thread[main,5,main]] Info: Start Execution of Offline CTC TemplatInstallerAug 6, 2008 1:32:17 PM           com.sap.tc.lm.ctc.PropertyLoader [Thread[main,5,main]] Info: Looking for additional Properties in file '../templateconfigurator.properties'Aug 6, 2008 1:32:17 PM           com.sap.tc.lm.ctc.PropertyLoader [Thread[main,5,main]] Info: Loading of additional Properties-File successful Aug 6, 2008 1:32:17 PM   ...ile.CULServiceReadProfileImpl.execute [Thread[main,5,main]] Path: entering 'execute'Aug 6, 2008 1:32:17 PM   ...ile.CULServiceReadProfileImpl.execute [Thread[main,5,main]] Path: args = input message: CTCAug 6, 2008 1:32:17 PM   ...vice.validation.XMLValidator.validate [Thread[main,5,main]] Path: entering 'validate'Aug 6, 2008 1:32:17 PM   ...vice.validation.XMLValidator.validate [Thread[main,5,main]] Path: validating okAug 6, 2008 1:32:17 PM   ...vice.validation.XMLValidator.validate [Thread[main,5,main]] Path: entering 'validate'Aug 6, 2008 1:32:17 PM   ...vice.validation.XMLValidator.validate [Thread[main,5,main]] Path: validating okAug 6, 2008 1:32:17 PM   ...l.BrokerWriteProfileImpl.writeProfile [Thread[main,5,main]] Path: Entering methodAug 6, 2008 1:32:17 PM   ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: Program terminated abnormally
ERROR 2008-08-06 13:32:18.21
CJS-00030 Assertion failed: in function NW_Call_Offline_CTC_ind_ind_ind_ind_SubComponentContainer_callOfflineCTC() {    var nw = NWInstall.getSystem(context.get("sid"));    var ctcDirFs = nw.getCI().getInstanceDir().concat("j2ee", "ctc");    var ctcExeFile = installer.onWindows() ? "LaunchOfflinectc.bat" : "LaunchOfflinectc.sh";    var ctcCall = ctcDirFs.concat(ctcExeFile);    installer.writeTrace("CTC is in" + ctcCall);    ASSERT(arguments.callee, ctcCall.isExisting(), "CTC executable cannot be found in " + ctcCall.toString());    var pmgt = new ProcessMgt();    var app = pmgt.createChildApplication(ctcCall, []);    var userData = nw.getUsers().getAccountData(NWUsers.roles.SIDAdm);    var user = (new AccountMgt()).getUser(userData.name);    var env = pmgt.getProcessEnvironment();    if (installer.onUnix()) {        env.setUser(user);    }    env.setWorkingDirectory(ctcDirFs.getNode());    env.setEnvironmentVariable(new Property("JAVA_HOME", nw.getJavaHome().toString()));    installer.writeTrace("For the Offline CTC Call, JAVA_HOME is set to " + env.getEnvironmentVariable("JAVA_HOME"));    app.setEnvironment(env);    var retval = app.run([], true);    ASSERT(arguments.callee, retval == 0, "CTC retval is not 0 but " + retval);    installer.writeTrace("CTC has been called in Offline Mode.");}CTC retval is not 0 but 1
ERROR 2008-08-06 13:32:18.21
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2008-08-06 13:32:18.21
FCO-00011 The step callOfflineCTC with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|16|0|NW_Call_Offline_CTC|ind|ind|ind|ind|7|0|callOfflineCTC was executed with status ERROR .
I am trying to install Solution manager 7 on Windows 2008 with MS SQL 2005 installed on 2003. This is a distributed install.
What am I overlooking?

Problem with BI activation in Solution Manager

Hello SAP experts.
I have problem with BI Content Activation in Solution Manager solman_workcenter - test management - settings - Bi reporting
The customizing in client 010 is ok. I have BW client 001. RFC connections
are ok. After activation of BW content in workcenter only new job in sm37
has been planned but the button Status Report has not appeared. I installed
newest add-on SAPK-70405INBICONT.
Detailed description:
After customizing in:
SPRO-Basic Data-BW Setup
and
SPRO-Scenario-Specific Settings - Test Management - BW-based Reporting.
The Activation of BW content in transaction solman_workcenter - Test
Management - Settings - BI Reporting Settings the message appears:
"Test Workbench Reporting - BI Content not active", after pressing save:"Settings of Test Workbench Reporting saved"
and
"Activation of BI Content for Test Workbench Reporting started".
In test evaluation the button Status report doesnt show. After repeated
activation appears the same message as in beginning: Test Workbench
Reporting - BI Content not active.
Thank you

Hi Marian,
Could you please provide me with details on how to setup test workbench reporting. I have a BW system external to Solution Manager. I have setup the RFC conncections and all is okay. I have also setup the source system in BW and installed the web templates. However, when activating the content via solman_workcenter - test management - settings, I get the following error:
Content Activation Log
Log for Setup ID 20100819135323
20100819 135323[ERROR ]: Current Status: ERROR
20100819 135323[INFO ]: Job CCMS_BI_SETUP successfully scheduled
20100819 135323[ERROR ]: Incorrect system setting: standard transport is active
20100819 135323[ERROR ]: Change system settings or set user parameters RSOISCONTENTSYSTEM and RSOSTANDARDCTOACTIVE
20100819 135323[ERROR ]: Prerequisites check failed
20100819 135323[ERROR ]: Jobname/count: CCMS_BI_SETUP 13532300
I am sure there is something wrong in my setup but I cannot figure out what it is. A step by step help on how to do it will be greatly appreciated.
Regards,
Rue.

Getting this error when trying to install solution manager...Please help!!!

ERROR 2010-06-01 11:59:43.214 [synxccuren.cpp:78]
 CSyCurrentProcessEnvironmentImpl::setUser()
FSL-00001 System call failed. Error 1326 (Logon failure: unknown user name or bad password.
) in execution of system call 'LogonUser' with parameter (ntadmin, wdflbmd0360, *******, LOGON32_LOGON_INTERACTIVE,LOGON32_PROVIDER_DEFAULT,&hUserToken), line (1015) in file (synxccuren.cpp).
TRACE 2010-06-01 11:59:43.479 [iaxxejsbas.hpp:408]
 handleException<ESyException>()
Converting exception into JS Exception ESyException.
TRACE 2010-06-01 11:59:43.479
Function setMessageIdOfExceptionMessage: modlib.jslib.caughtException
ERROR 2010-06-01 11:59:43.479
 CJSlibModule::writeError_impl()
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
TRACE 2010-06-01 11:59:43.479 [iaxxejsbas.hpp:483]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2010-06-01 11:59:43.542 [sixxcstepexecute.cpp:950]
FCO-00011 The step setUserEnvironment with step key |NW_Users_Create|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0|setUserEnvironment was executed with status ERROR ( Last error reported by the step :Caught ESyException in Modulecall: ESAPinstException: error text undefined.).
TRACE 2010-06-01 11:59:43.557 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing option SAP Solution Manager 7.0 EhP1 > Software Life-Cycle Options > Additional Preparation Options > Operating System Users and Groups( Last error reported by the step :Caught ESyException in Modulecall: ESAPinstException: error text undefined.). You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose View Log to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/SOLMAN/LM/USR. </body></html>
TRACE 2010-06-01 11:59:43.557 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
INFO 2010-06-01 12:00:05.386 [sixxcstepexecute.cpp:1003]
An error occured and the user decided to stop.\n Current step "|NW_Users_Create|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0|setUserEnvironment".

Hi, I am facing something like only.
I have windows 2008 Server 64 Bit/Oracle 11g 64 bit and trying to install SAP BI 7.0.
Please have a look at the log below:
WARNING[E] 2013-06-26 20:10:20.152
FSL-06002 Error 1722 (The RPC server is unavailable.
) in execution of a 'OpenSCManager' function, line (130), with parameter (ServicesActive).
WARNING[E] 2013-06-26 20:10:20.152
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2013-06-26 20:10:20.152
FCO-00011 The step setDefaults with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|NW_getDBInfo|ind|ind|ind|ind|2|0|NW_getDBInfoGeneric|ind|ind|ind|ind|2|0|setDefaults was executed with status ERROR .

Error during installation of SAP solution manager netweaver 7.0

Hi,
I encounter the error message below when try to install the solution manager. Anyone pls help?
INFO 2011-08-26 12:54:59.763
Output of D:\usr\sap\TST\DVEBMGS00\exe\jlaunch.exe UserCheck.jlaunch com.sap.security.tools.UserCheck "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\install\lib;C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\install\sharedlib;C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\install" -c sysnr=00 -c ashost=SWIFSTEST -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION_RO -user_type system -message_file UserCheck.message is written to the logfile C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS/UserCheck.log.
WARNING 2011-08-26 12:55:02.059
Execution of the command "D:\usr\sap\TST\DVEBMGS00\exe\jlaunch.exe UserCheck.jlaunch com.sap.security.tools.UserCheck "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\install\lib;C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\install\sharedlib;C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\install" -c sysnr=00 -c ashost=SWIFSTEST -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION_RO -user_type system -message_file UserCheck.message" finished with return code -3. Output:
Usage : D:\usr\sap\TST\DVEBMGS00\exe\jlaunch.exe [-options] <arg0> <arg1> ... <argn>
Launch the specified java program
options : [-file=<property file>] (default=jlaunch.properties)
 [-nodename=<node name>] (default=jlaunch)
 [-app=<application name>] Standalone application
 -> <property file> = <application name>.properties
 -> <SAP profile> = <application name>.pfl
 [pf=<SAP profile>] (default=jlaunch.pfl)
 [-parent=<pid of the parent process>] (default=0)
 [-tracefile=<filename>] (default=dev_jlaunch)
Critical Error
Can't read program properties
-> Internal program error (rc = -1)
INFO 2011-08-26 12:55:02.059
Removing file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\dev_UserCheck.
WARNING[E] 2011-08-26 12:55:02.122
CJS-30197 . DIAGNOSIS: For more details see output of log file:
ERROR 2011-08-26 12:55:02.309
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|3|0|createJSF was executed with status ERROR .

Following is log display in sapinst.log file
INFO 2009-12-09 16:11:37.46
Execute step setNWOption of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|1|0.
INFO 2009-12-09 16:11:37.593
Execute step collect of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0.
WARNING 2009-12-09 16:11:38.984
Error 5 (Access is denied.
) in execution of a 'RegOpenKeyEx' function, line (81), with parameter (SYSTEM\CurrentControlSet\Services\etqcdrk).
WARNING 2009-12-09 16:11:39.0
The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\etqcdrk' does not exist on the 'localhost' host.
ERROR 2009-12-09 16:11:39.31
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\etqcdrk' does not exist on the 'localhost' host.
ERROR 2009-12-09 16:11:39.46
FCO-00011 The step collect with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|collect was executed with status ERROR .
INFO 2009-12-09 16:18:05.562
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|collect".

Error at phase 25 of Solution Manager 7.1

Hello all,
Am installing Solution Manager 7.1 on RHEL 5.0. Database is orage 11g
Iam facing an error at phase 25 i.e.
"An error occurred while processing option SAP Solution Manager 7.1 > SAP Systems > Oracle > Central System > Central System( Last error reported by the step: ABAP processes of instance SM1/DVEBMGS00 ABAP: UNKNOWN did not start after 5:30 minutes. Giving up.)."
The contents of sapinst.log are,
ERROR 2011-09-13 09:19:55.750
CJS-30087 Instance SM1/DVEBMGS00 [ABAP: UNKNOWN] did not stop after 5:10 minutes. Giving up.
ERROR 2011-09-13 09:19:56.587
FCO-00011 The step start with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Start|ind|ind|ind|ind|3|0|start was executed with status ERROR ( Last error reported by the step :Instance SM1/DVEBMGS00 [ABAP: UNKNOWN] did not stop after 5:10 minutes. Giving up.).
INFO 2011-09-13 09:19:57.812
Creating file /tmp/sapinst_instdir/SOLMAN71/SYSTEM/ORA/CENTRAL/AS/__instana_tmp.xml.
PLease suggest me....
Thank You,
Regards,
Hasan

Hello Rajesh,
1.The swap partition is 20 GB
2.dev_disp log
MBUF component DOWN
DpHalt: cleanup EM
DpHalt: cleanup event management
Wed Sep 14 03:13:00 2011
DpHalt: cleanup shared memory/semaphores
DpCleanupSharedResources: removing request queue
***LOG Q05=> DpHalt, DpHalt ( 25857) [dpxxdisp.c   11230]
DpHalt: *** shutdown completed - server stopped ***
3.dev_w0 log
B Wp Hdl ConName          ConId     ConState     TX BC HC PRM RCT FRC TIM MAX OPT Date     Time   DBHost
Program
B 000 000 R/3              000000000 INACTIVE     NO NO NO YES NO NO 000 255 255 20110914 024314 sapnw02
C Disconnecting from connection 0 ...
C Closing user session (con=0, svc=16ef73b8, usr=16f39d40)
C Detaching from DB Server (con=0,svchp=16ef73b8,srvhp=16efa328)
C Now I'm disconnected from ORACLE
B Disconnected from connection 0
B statistics db_con_commit (com_total=118, com_tx=21)
B statistics db_con_rollback (roll_total=1, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 25891) [dpuxtool.c   327]
4.dev_rd log
DpCommAttachTable: attached comm table (header=2adeb293f670/ft=2adeb293f678)
MtxInit: -2 0 0
DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
Wed Sep 14 02:43:20 2011
GwDpInit: attached to gw_adm at 2adeb29cc160
Wed Sep 14 03:12:48 2011
GwISigint: received SIGINT (2), start shutdown phase
***LOG S30=> GwStopGateway, gateway stopped () [gwxxrd.c     12940]
Regards,
Hasan

Error in installation of Sap Solution Manager - AIX / Oracle

Hello,
We are installing SAP Solution Manager in Operating System is AIX 5.3 and Database System is Oracle 10.2
After the Oracle Installation, in the phase of Abap Import (16 of 44), we are
receiving the follow error message:
Required system resources are missing or not available:
Import directory '/oracle/install/51032524/EXP1' does not exist;
Import directory '/oracle/install/51032524/EXP2' does not exist;
Import directory '/oracle/install/51032524/EXP3' does not exist;
Import directory '/oracle/install/51032524/EXP4' does not exist.
ERROR 2007-04-12 15:27:41
CJS-30022 Program 'Migration Monitor' exits with error code 2. For
details see log file(s) import_monitor.java.log, import_monitor.log.

The installation export DVD was copied to local machine (the directory
list is attached in zip file). We get this DVD from
service.sap.com/swdc.
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142ifx-20061222 (ifix 113727: SR7 + 112603) (JIT enabled: jitc))
IMPORT_MONITOR.JAVA shows this message:
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 AIX ppc64-64 j9ap64142ifx-20061222 (JIT enabled)
J9VM - 20061220_10521_BHdSMr
JIT - 20061026_1805_r8
GC - 200612_20)
Required system resources are missing or not available:
Import directory '/oracle/install/51032524/EXP1' does not exist;
Import directory '/oracle/install/51032524/EXP2' does not exist;
Import directory '/oracle/install/51032524/EXP3' does not exist;
Import directory '/oracle/install/51032524/EXP4' does not exist.
And the directory is OK
/oracle/install/51032524
ls -l
total 160
-rwxrwxrwx 1 root system 79 Apr 12 09:54 CDLABEL.ASC
-rwxrwxrwx 1 root system 79 Apr 12 09:54 CDLABEL.EBC
-rwxrwxrwx 1 root system 9093 Apr 12 09:54 COPY_TM.HTM
-rwxrwxrwx 1 root system 5787 Apr 12 09:54 COPY_TM.TXT
-rwxrwxrwx 1 root system 8559 Apr 12 09:54 CRCFILE.DAT
drwxrwxrwx 4 root system 256 Apr 12 10:03 EXP1
drwxrwxrwx 4 root system 256 Apr 12 10:11 EXP2
drwxrwxrwx 4 root system 256 Apr 12 10:14 EXP3
drwxrwxrwx 4 root system 256 Apr 12 10:16 EXP4
-rwxrwxrwx 1 root system 88 Apr 12 09:54 LABEL.ASC
-rwxrwxrwx 1 root system 88 Apr 12 09:54 LABEL.EBC
-rwxrwxrwx 1 root system 20 Apr 12 09:54 LABELIDX.ASC
-rwxrwxrwx 1 root system 22361 Apr 12 09:54 SHAFILE.DAT
-rwxrwxrwx 1 root system 22 Apr 12 09:54 VERSION.ASC
Please, anybody have any idea?
Thanks for help,
Carlos Nogueira

Hi Carlos, can you resolve this ? because i have the same problem, but with sql and win 2003.
java version "1.4.2_15"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_15-b02)
Java HotSpot(TM) Client VM (build 1.4.2_15-b02, mixed mode)
Required system resources are missing or not available:
Import directory sapinst\saptrans\D51032007\EXP1' does not exist;
Import directory 'sapinst\saptrans\D51032007\EXP2' does not exist;
Import directory 'sapinst\saptrans\D51032007\EXP3' does not exist;
Import directory 'sapinst\saptrans\D51032007\EXP4' does not exist.
thanks in avance.

Error with CTC users at Solution Manager 7.1

Similar Messages

Maybe you are looking for