Error with DB connect

Dear All,
I have successfully created the MS DB and i am able to view the tables too.
When i click on Edit datasource --> Check Datasource , it throws up an error
"Event with errors RSDL_META_UPLOAD in DataSource".
If i still go ahead and create the datasource i am able to load the data to PSA. But when i click on psa to check the data then i get another error message
Syntax error in , row 27 (-> long text).
Message no. RG102
Diagnosis
No component exists with the name "APPCODE". "APPCODE".
Dont know why is this happening.
For testing purpose i created one test table and with few reocrds and tried performing the same action in BI then the system does not throw up any error, strange.
Can you let me know what is the issue.
BW patch level is 23 , SAP BASIS leve is 21 and PI_BASIS is 21.
Thanks & Regards,
Anup

Dear Anup,
The basic prerequisites of DB-Connect extraction is that the table/view names must be in Upper case and the name should be less than or equal to 16 characters and should not contain non-alphanumeric characters.
Reason is that the ABA dictionary has the following restrictions:
Note that the technical field name cannot be longer than 16 characters and can only consist of upper case letters, numbers and the underscore character. Using other characters or blank can lead to problems. You also cannot use fields with reserved field names, such as COUNT. Fields that do not meet these restrictions are not available for extraction.
Check this prerequisites and correct if any incosistency exists. Afterwards regenerate the datasource.
Best regards,
Eduardo

Similar Messages

Port 0 error with mail connection HELP!

Hello all I have seen this topic on the forum before but all the solutions out there have not worked. I have worked on my school's wireless network for more than a year now and have had no problem using apple's mail to access .mac mail and g-mail mail (via pop mail forwarding) until three months ago or so. Then all of a sudden mail wont get the mail from the two accounts and I have these popular error messages
There may be a problem with the mail server or network. Check the settings for account "[email protected]" or try again.The server error encountered was: The connection to the server "mail.mac.com" on port 0 timed out.
and
There may be a problem with the mail server or network. Check the settings for account "G-mail" or try again.The server error encountered was: The connection to the server "pop.gmail.com" on port 0 timed out.
I have tried two suggested fixes:
1) I went to network port configurations and only checked the configurations I wanted to use to connect to the internet and dragged the one used most (airport) to the top
2) I went to the proxy section and disabled (unchecked) the SOCKS proxy. Some posts have suggested that a SOCKS proxy update in 10.4.7 may have caused the problem.
Neither of these have worked. Also, I have contacted my network administrator thinking that the school's firewall might be causing the problem. To test this, he shut down the firewall and still the problem occured. I am out of suggestions. Anyone have anything else to try.
Ohh by the way, when I am at home on my home network, mail works fine and I am able to get my e-mail as usual.

Hello all I have seen this topic on the forum before but all the solutions out there have not worked. I have worked on my school's wireless network for more than a year now and have had no problem using apple's mail to access .mac mail and g-mail mail (via pop mail forwarding) until three months ago or so. Then all of a sudden mail wont get the mail from the two accounts and I have these popular error messages
There may be a problem with the mail server or network. Check the settings for account "[email protected]" or try again.The server error encountered was: The connection to the server "mail.mac.com" on port 0 timed out.
and
There may be a problem with the mail server or network. Check the settings for account "G-mail" or try again.The server error encountered was: The connection to the server "pop.gmail.com" on port 0 timed out.
I have tried two suggested fixes:
1) I went to network port configurations and only checked the configurations I wanted to use to connect to the internet and dragged the one used most (airport) to the top
2) I went to the proxy section and disabled (unchecked) the SOCKS proxy. Some posts have suggested that a SOCKS proxy update in 10.4.7 may have caused the problem.
Neither of these have worked. Also, I have contacted my network administrator thinking that the school's firewall might be causing the problem. To test this, he shut down the firewall and still the problem occured. I am out of suggestions. Anyone have anything else to try.
Ohh by the way, when I am at home on my home network, mail works fine and I am able to get my e-mail as usual.

Errors with BeatsMusic connecting to playlist

ERRORS CONNECTING TO ANY PLAYLIST THROUGH APPLETV APP
Starting about a week ago, I have been unable to play anything from playlists (neither ones created by me nor ones created by others) when using the AppleTV App. I am still able to play from Albums by selecting ones in "Just for You" and can play any album or song when searching for it specifically under "search" My playlists still work fine when I play from my phone.
I have completely reset (restored to factory settings) everything on my AppleTV, but I still have the problem.
For more detail, when I select a playlist, it FIRST hangs on the screen "Accessing Beats Music" for about a minute, THEN it says "Beats Music is unavailable. Try again later. Go to support.beatsmusic.com for more information."
This is VERY frustrating, because I purposely selected Beats Music because of its integration with the Apple TV, paid the ANNUAL membership, DROPPED my Spotify membership, and spent a LOT of time creating playlists. Now I wish that I had never signed up for Beats and spent the time creating all the playlists trapped in a system that cannot be exported.
Yes, I am aware the I can stream my playlist from my phone, but thetas not an acceptable solution to me. I want to be able to have music in the background when people come over and do not want that interrupted if I need to answer the phone.

Still seems too be low even though I did that adsl thing
Noise margin (Down/Up)
3.0 dB / 6.5 dB
Line attenuation (Down/Up)
29.1 dB / 12.7 dB
Output power (Down/Up)
28.0 dBm / 1.7 dBm
Loss of Framing (Local/Remote)
0 / 0
Loss of Signal (Local/Remote)
0 / 0
Loss of Power (Local/Remote)
0 / 0
FEC Errors (Down/Up)
25 / 0
CRC Errors (Down/Up)
9 / 64
HEC Errors (Down/Up)
4 / 0
Error Seconds (Local/Remote)
3 / 0

Error with stored connection in SQL Dev Version 3.0.03

Hello, I have downloaded new version SQL Developer / Version 3.0.03 / Build MAIN-03.97
When I try to log into stored connection (I have 3 connections, 2 are working perfectly and the last (most important) is not working (in previous version of SQLDev worked too) - please look on the picture of error. I tried to change NLS parameters, but nothing worked. [http://roudas.borec.cz/err.bmp]

Someone else reported this ora-01882 "timezone region not found" with 3.0.03.97 but not with 3.0.03.45 but no response from the team yet.

Error with JCO connection ?

Hi,
I used the example TutWD_FlightList yo test Web-dynpro , Then after I deployed to the Server . I enter 'Web-dynpro' to create 2 JCO connections . There were 2 cases :
1. If I chose Application Data & Single Server Connection . Test is OK ( Connection for 'WD_FLIGHTLIST_MODELDATA_DEST' was sucessfully tested with user 'XXX' ) . And the if I run the web-dynpro I get the error :
The initial exception that caused the request to fail, was:
   com.sap.dictionary.runtime.DdException: 'WD_FLIGHTLIST_RFC_METADATA_DEST' not properly defined! Unable to create Metadata connection for Dictionary Provider. Either the logical System Name 'WD_FLIGHTLIST_RFC_METADATA_DEST' has not been properly defined in the System Landscape Directory, or you are not using a MsgServerDestination (AppServerDestinations are not permitted for Metadata connections)
    at com.sap.dictionary.runtime.ProviderFactory.internalGetProvider(ProviderFactory.java:191)
    at com.sap.dictionary.runtime.ProviderFactory.getProvider(ProviderFactory.java:146)
    at com.sap.dictionary.runtime.DdDictionaryPool.getProvider(DdDictionaryPool.java:97)
    at com.sap.dictionary.runtime.DdDictionaryPool.getDictionary(DdDictionaryPool.java:79)
    at com.sap.dictionary.runtime.DdDictionaryPool.getDictionary(DdDictionaryPool.java:48)
    ... 54 more
But If I chose 'Dictionary Meta Data ' ( When create JCO connection ) , The test was not successfull , Here I have only 1 R/3 Server So i do not use message server for load balancing . So In my case How can I do ?
Thanks

hi,
please find out the below link it will be useful to u.
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0019b1a-775f-2910-beb8-d81f27d0d8d0]
in order to call the BAPIs from the backend system Logical destionations should be created properly for ur R/3 system and they should be in enable mode. please check it once. and also check ur message server once.
Thanks
Anu

Error with DB connect Data loading

Dear All,
In my project we have created DB connect data sources and loaded data and it was successful. But now for few fields data type has been changed and after changing the data type when we are trying tol oad the data to PSA, it is showing
"Unknown error while uploading data from the DB table" , "Error occured with source system" etc.
But in DB connect source system their views are running fine from which we are extracting the data.
Please help on the same.
Regards,
SS

Hi,
First i would like to know where the fields data type has been changes in DB side or in BI ?
Try to generate the datasources again
activate the xfer rules and match the Fields type on both side
have a test extraction in BI , Using Display table content of DB View in BI
and check whether its given correct data.
Hope this helps.
Sonal....

FMS error with Adobe Connect server

I have a Adobe Connect server that freezes often. When it is hard rebooted, I see "FMS_CON_BROKEN" error and since FMS is broken, the health check fails and the server hangs. Is there a fix or at least a place to look for an exact issue? I have this on Windows 2003 Sp2 .

The server shouldn't have issues with streaming multiple Presenter courses. Each server is designed to handle upto 500 concurrent connections, so if you have more than 500 students trying to access the presentation at the same time, you will likely see issues. If that is not the case, then you may have a firewall issue or something else causing the issue. Do you have any Anti-virus runing on the Server? Have you looked at the Logs to see if there is any insight there as to what happened?

Errors with HTTPS Connection to external server

I am trying to establish a HTTPS connection to an external web site in transaction SM59, but I get ICM_HTTP_CONNECTION_FAILED errors. I get the same errors from a bespoke ABAP program.
I know the request is getting to the web site, but the response is not getting back into SAP.
This is not firewall related.
I have installed and configured the SAPCRYPTOLIB software for SSL support and entered the necessary instance profile parameters.
I have configured STRUST.
SM59 is setup for type G (HTTP Connection to Ext. Server) and port no. 8443
I have started the HTTPS service in SMICM
I have noticed an odd entry in the SCICM trace file, but dont know how to fix.
<i>ERROR => Connection request from (-1/65535/0) to host: mms-sap.sapmms.com, service: 8000 failed (NIECONN_PENDING)</i>
Does anyone have any suggestions?

Thanks for your comments.
I've tried everything in SM59.
SAP refers to both protocols as HTTP.
I think the error is with the response coming back into SAP. SAP doesn't know what to do. It might be DNS related or I might need to configure the ICM somewhere. Oddly the response comes back into sap on port 8000 (which is HTTP). It went out on port 8443 (which is HTTPS).

Channel login error with HTTPS connection

Hi!
I have developed a Flex application which relies on remote object invocations to BlazeDS. I have applied custom authentication to the AMF channel, so login is required to invoke remote objects over the channel.
Application worked perfectly in development environment but at production environment I cannot get channel sucessfully logged in. I have debugged application and no response is obtained from server after channel.login() invocation. Backend resides on Apache Tomcat that listens on port 80. Server is fronted by a Proxy Server that sets HTTPS protocol (https://domain:80/context is set at browser URL although I request http://domain:80/context).
At development environment requests where made with HTTP protocol so I wonder if this issue is related with the HTTPS protocol present in the new server.
Do I need to configure my channels to use secure (HTTPS) communications? Why am I not getting any error response from channel login operation?
I reviewed server logs and It seems login AMF invocation are been tracked but I cannot get any response.
Thank you in advance.

Thank you Alex.
I've set this configuration in services-config.xml. First I tried using SecureAMFEndpoint but then I got an exception on Server that said a secure destination was needed (as it was secured) but was not receiving a secured request. I saw a post in a forum that said AMFEndpoint must be used instead of SecureAMFEndpoint when SSL is applied to a proxy that redirects request to Tomcat, not to Tomcat itself, and this is my case.
<services-config>
    <services>
        <service-include file-path="proxy-config.xml" />
        <default-channels>
           <channel ref="amf-channel"/>
        </default-channels>
    </services>
    <channels>
        <channel-definition id="amf-channel" class="mx.messaging.channels.SecureAMFChannel">
            <endpoint
                uri="https://{server.name}:{server.port}/{context.root}/messagebroker/amf"
                class="flex.messaging.endpoints.AMFEndpoint" />
            <properties>
                <add-no-cache-headers>false</add-no-cache-headers>
            </properties>
        </channel-definition>
</services-config>
After setting this, channel is succesfully logged in and a remote invocation that is executed inmediatly after channel loggin is completed works OK. But when later I call another remote objects, I get request timeout errors and server is not reached.
Any idea of the issue?

Error with service connections

Hi ,
I have configuring serivce connections in SOLMAN but when i go open the connections it doesn`t open for few systems . Also the connections get open if i want to choose client 000 but it doesn't open for our client . I get these error message .
System P83 can not be accessed via destination SM_P83CLNT410_READ
System P83 can not be accessed via destination SM_P83CLNT410_TRUSTED
Ping to SAP Support Backbone failed
Thanks
Harsh

Hi Krishnam,
you better ask such questions in the BSP forum. But you should go to transaction SICF and activate the service of your application. Usually you'll find it in /sap/bc/bsp/sap/<application>. You need also some other standard services if this is your first BSP application. Check in documentation or in the correct forum.
Regards
Ralph

I can't update the iPhoto since i installed the iCloud , every single time i was trying to update , i had press the update button , and my mac was on internet , but it have a massage pop up saying an error with internet connection ..... please help me ..

Hi All smart user
i had a mac book and an iPhone , there was no problem at all to load infomation from i Phone to Mac until i had install the iCloud , since i install it , the iPhoto needs to be update , but when everytime i press the update icon on the iCloud manue , it brings me to App Store update page , then i press update again , and input my apple id and password , then it stop working and have a msg box pop up saying my mac is not connected to internet which my mac actually does connected ... i currently cant export any photo to my mac ... can anyone help me ?? i had tried to use bluetooth , but same problem ...... please help ....
thanks .
ET

There is no such thing as an "SG3" or "SG4". Did you possibly mean a 3GS and iPhone4?
It has always been very basic to ensure that a backup exists of your media and other important files. Computers fail, hard drives crashes... things happen. Do you not have a backup? The iPhone, like all iDevices is NOT a backup of your media, but rather a mirror of the content in the iTunes library on your computer.
If your contacts, pics, etc are not on your computer, no backups of the iPhone exist, and they are not on the phone, they are gone.
No one can magically make them re-appear.

Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go?

Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go, therefore i cannot use the apps?HELP PLEASE

http://support.apple.com/kb/TS3281

Internet Download error message: the connection with the server has been reset

With an WRT54GS v6 firmware v 1.50.9 on Windows XP SP2 with Internet Explorer 7, Intel wireless internal adaptor w/ 802.11b, I was getting the error message "The connection with the server has been reset" when downloading most anything from the Internet. My IP address would then be reset and download would be interrupted. To resolve, I turned off the WZC (Wireless Zero Configuration) Services, and this seems to correct the problem.
Control Panel > Admin Tools > Services > Wireless Zero Configuration > Disable
Hopes this helps.

Hi!
Im using Windows 7.... I tried looking for the Wireless Config - but it isn't in the Services options!
So, what can I do now?
Thanx

My iPod touch 4th gen. Keeps giving me the error message "cannot connect to the app store when I sign in. I can open the app store and browse it but I can't download anything. I have full signal strength with my wi-fi and safari is working perfect.

My iPod touch 4th gen. Keeps giving me the error message "cannot connect to the app store when I sign in. I can open the app store and browse it but I can't download anything. I have full signal strength with my wi-fi and safari is working perfect. I turned it off and restarted it 3 times now. I have an iPad 2 and the app store works flawlessly with it. What is going on?

Same here on my lpad2. Can access the web just fine from browsers but cannot install new apps or updates in appl store. Seeing a few others reporting same issue tonight so likely an apple server issue and staff will notice it in network monitors and fix it...sometime this weekend.
Rob

Error while Test Connection with Connector

hi all:
     there is an error while Test Connection with Connector , I also test it through sys administration->sys configuration->
suport -> sap transaction, I got all errors, I put these two errors as folows, could you please tell me how to sovle it
***************ERROR 1 while *error while Test Connection with Connector ******************************************************
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this
system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
************error sys administration->sys configuration-> suport -> sap transaction        ********************** 1.5 #0025B3E02892006100000A0800001798000487530FB0122E#1274690722265#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt
.runtime#guodongdong#47472##n/a##690347f0670e11df98cc0025b3e02892#SAPEngine_Application_Thread[impl:3]
9##0#0#Error##Java###04:4524/05/10_0077_6087550
[EXCEPTION]
#1#com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Application URL
&\#39;:///sap(ZT1KVXBWektldldTeV9QQXBXRjNaWTRBLS1OZmRvZzBRWWY2QmN0WThNUmgqdUlRLS0=)/bc/gui/sap/its/webgui&\#39; is not valid!
Please check the protocol and host entries for system &\#39;sapdev&\#39;.
     at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass
(AbstractIntegratorComponent.java:123)
     at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:523)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:412)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process
(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

Hi,
As per this part of the trace:
Exception in SAP Application Integrator occured: Application URL &\#39;:///sap(ZT1KVXBWektldldTeV9QQXBXRjNaWTRBLS1OZmRvZzBRWWY2QmN0WThNUmgqdUlRLS0=)/bc/gui/sap/its/webgui&\#39; is not valid! Please check the protocol and host entries for system &\#39;sapdev&\#39;. at ...
You can clearly see that the system object 'sapdev' is not configured correctly/at all - you are trying to launch transaction iView
(WEBGUI) and in order to do so you should configure the 'internet transaction server' category of the system object
with the hostname of the ITS server.
Generally the template is
<System.Access.ITS.protocol>://<System.Access.ITS.hostname>/sap<ESID>/bc/gui/sap/its/webgui?\....
So that's why you got
Please check the protocol and host entries for system ..

Error with DB connect

Similar Messages

Maybe you are looking for