Error with Downloaded Excel Drill Through Report

Hello! Please help!
I am having problem with the excel downloaded drill through report. Downloading the report is ok, but when I open the downloaded report, it always have this error:
View Display Error
Error generating view. Error getting cursor in GenerateHead
Error Details
Error Codes: OAMP2OPY:EHWH2A7E
A numeric value was expected (received "0").
The parent report is ok. No such error is being encountered whenever I tried to open downloaded parent report.
I am using OBIEE 10.1.3.4.1 version.
Regards,
MJ
Edited by: user13803157 on Oct 12, 2011 7:34 PM
Edited by: user13803157 on Oct 12, 2011 7:34 PM

This is a known bug. Here are the Metalink details:
Cause
This is due to bug 8394579 - Numeric Input Results in Non-Numeric Error.
Solution
Download and apply patch 9492821. This includes a fix for bug 8394579, even though it is not listed in the readme as being included.
Note that the patch is password protected. Contact Oracle Support for a password.
An alternative solution is to upgrade to OBIEE 11g.
If this was helpful, please mark the response as correct.

Similar Messages

SSRS Drill through report - Text Box Properties, Action - Go to Report

Apologies for the potentially very basic nature of my question, I am fairly new to using SSRS (using SQL Express 2014) and struggling with creating a drill through report using other reports. Where the problem is, is when I go to the Text Box
Properties - Action - Go To Report. Where it says to specify a report, I click on Browse and it only allows me to look in 'Recent Sites and Servers' - I therefore cannot navigate to where my other report that I wish to link is stored. What am I
missing? Any suggestions appreciated. Thank you

If you dont have the report to which you need to navigate within the same project, you should be using jump to URL option and specify full report server url of the second report with only parameter part replaced by the actual field from which you need to
pass the value
Another way is to create a linked report for the report to which you need to navigate within the same project as your first report and then use jump to report option to include the linked report along with its parameters and corresponding values.
http://www.mssqltips.com/sqlservertip/2308/sql-server-reporting-services-linked-reports-example/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

*****EIS : Drill through Report Error while excel data retre

Dear All,
could you please help me in the below error . When i tried to get the drill through reports in excel add-in ,
i am getting the below error . When i had look into EIS log, its generating dynamic query for this drill through reports .
[NCR][ODBC Teradata][Teradata Database] Syntax error- expected something between the word '<<Databasename>>' and the word 'ai'.Unable to get catalog string.
Thanks in advance .
M

You are saying the dynamic query was generated, did you copy the query and tried to execute it in the database client. Check the SQl for any errors and also in the did you see any SQL errors?

Error in Drill through reports

Hi All,
I need a help with Drill through reports in Essbase Studio.
I created a drill through report successfully. Now When I trill to access that report using SmartView, I am able to see the report at generation 2, but as soon as drill down, i am getting following error.
" BPM drill through functionality not available. EMC required in MDX query "
Please advice.

Can anyone please give some suggestions ? I guess I figured out that whenever there is a duplicate member present in a hierarchy, its gives me the following error:
*" BPM drill through functionality not available. EMC required in MDX query "*
Please advice.

Issue with Drill Through Reports in Essbase Studio.

Hi,
we are using essbase studio to drill through to the source table in Oracle.In drill through definition the query is like , select * from source where (Project IN ($$PROJECTS-VALUE$$)). Project column is located in source table and PROJECTS-VALUES are located in Essbase under project dimension and we will select the values in smart view. we are using smart view to check drill through reports.In smart view, If i select one member at gen-2 level which contains 1450 level-0 members,It is saying as error in executing the report in line 1972. Is there any limitation with IN condition , such that oracle takes only limited values like count of 999.we are facing issue only at gen-2 of project and it is working good from gen-3.
Please let me know is there any kind of certain limitation.

It is possible you are overloading the parser. If the projects table/view is a recursive join, when Studio creates the $$Project-value$$ is actaully returns all the level zero members under the member selected(at least in 11.1.2.X. If the list is huge, it might have problems. I would open an SR to see if there is a limit. It might be number of characters or values

Problem with EIS drill through reporting

Hello, Please help me with this. We are using Drill Through reports with EIS 7.1 and Essbase 7.1 in AIX environment. (These are the IBMDB2 Olap versions, not directly from Hyperion.) For some reports when retrieved on a member with more number of children, the Integration server gets killed and we get the following error ESSDTU {ESSNET MESSAGE} Network error [10054]: Cannot Send Data Following is the information in the server log file: [Thu Jul 13 4:39:04 PM 2006] /IS/Listener/0/Informational/1051001/Build-EIS71B168 Received client request Login [Thu Jul 13 4:39:04 PM 2006] /IS/Coordinator/0/Informational/0/Build-EIS71B168 Executed client request 'Login' in 0 seconds [Thu Jul 13 4:39:04 PM 2006] /IS/Worker/1152826749/Informational/0/Build-EIS71B168 Initialization completed, 'Worker' service is online. [Thu Jul 13 4:39:04 PM 2006] /IS/Worker/1152826749/Informational/0/Build-EIS71B168 Received client request Get Drill-Through report [Thu Jul 13 4:39:04 PM 2006] /IS//0x0/1152826749/Informational/0/Build-EIS71B168 Successfully loaded the OLAP Model 'OM1' [Thu Jul 13 4:39:05 PM 2006] /IS//0x0/0/Informational/1051034/Build-EIS71B168 EssbaseAPI: Logging in user [User1] [Thu Jul 13 4:39:05 PM 2006] /IS//0x0/0/Informational/1051035/Build-EIS71B168 EssbaseAPI: Last login on Thursday, July 13, 2006 4:24:33 PM [Thu Jul 13 4:39:06 PM 2006] /IS/Worker/1152826749/Informational/0/Build-EIS71B168 Executed client request 'Get Drill-Through report' in 2 seconds [Thu Jul 13 4:39:07 PM 2006] /IS/Worker/1152826749/Informational/0/Build-EIS71B168 Received client request Get Drill-Through report attributes [Thu Jul 13 4:39:07 PM 2006] /IS/Worker/1152826749/Informational/0/Build-EIS71B168 Executed client request 'Get Drill-Through report attributes' in 0 seconds [Thu Jul 13 4:39:07 PM 2006] /IS/Worker/1152826749/Informational/0/Build-EIS71B168 Received client request Get Drill-Through report data [Thu Jul 13 4:39:07 PM 2006] /IS/Worker/1152826749/Informational/0/Build-EIS71B168 Drill Through Report for Essbase Server:Server1.corp.com Application<img src="i/expressions/face-icon-small-happy.gif" border="0">T1 DB<img src="i/expressions/face-icon-small-happy.gif" border="0">B1 User:User1 [Thu Jul 13 16:39:16 2006] /IS/Server///Informational/0 Unknown flag [JDBC DSN] found, ignoring it/Build-EIS71B168 [Thu Jul 13 16:39:16 2006] /IS/Server///Informational/0 Found Q command line parameter and a value of 128 is set to it/Build-EIS71B168 [Thu Jul 13 16:39:16 2006] /IS/Server///Informational/0 Setting configuration variable, server home, to 'c:\ibm\db2olap\is'/Build-EIS71B168 [Thu Jul 13 16:39:16 2006] /IS/Server///Informational/0 Setting configuration variable, temporary directory, to 'C:\DOCUME~1\malkar\LOCALS~1\Temp'/Build-EIS71B168 [Thu Jul 13 16:39:16 2006] /IS/Server///Informational/0 Setting configuration variable, log file name, to 'c:\ibm\db2olap\is\log\olapisvr.log'/Build-EIS71B168 [Thu Jul 13 16:39:16 2006] /IS/Server///Informational/0 Setting configuration variable, Essbase message database, to 'C:\ibm\db2olap\bin\essbase.mdb'/Build-EIS71B168 [Thu Jul 13 16:39:17 2006] /IS/Coordinator/0/Critical/2002003/Build-EIS71B168 Invalid session identifier, please log in to Essbase Integration Services Server again. [Thu Jul 13 16:39:28 2006] /IS/Coordinator/0/Critical/2002003/Build-EIS71B168 Invalid session identifier, please log in to Essbase Integration Services Server again. Please let me know if this is something to do with the EIS limitations or some setting Thanks Kris

Normally if the drill through report fetches a wrong combination of members or huge amount of members than the way it was designed in the Drill through Report template. The database may fail due to improper query. Check the database and table status. Also fetch the report with proper combination of members.

Drill through report with parameters that user can change

Hi Team,
Need to provide user the ability to select the parameters in drill through report.
But even after changing parameters to different values and click view reports.Its getting reset to the parameter that being passed from main report.
Is there any way we can override these parameter values in drill through reports so that It can also work as normal report.
Thanks!

The user is interfacing with the main report so add the needed subreport parameters to both reports. In the main report, select the subreport > properties > Parameters. add the subreport parameters and set the value to the same parameter in the main
report by clicking expression builder (fx) and selecting the appropriate parameter.
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek.

Drill Through Report With Essbase Studio

I have built a new minischema, cube / essbase model, and deployed to Essbase using Hyperion Studio 11.1.2.1. I created a drill-though report and was able to use the "test" feature to verify that the report returned data. The drill-through report type is relational and the association has been mode to my new cube. Restarted and confirmed the studio services were running correctly on the Essbase server. I have tried to drill-though using SmartView and AddIn, but recieve the message "No Drill Through Report at this Location". Cell styles are enabled and its not picking up my drill-through styles.
Pray tell what I should consider as my next move to troubleshoot?

Did not have the proper APS server connection selected during my testing. :D Once I connected SmartView to the proper APS server the application translated the drill-through report correctly.

EIS drill through reports in Analyzer

I'm having trouble pulling SQL drill through reports defined in EIS when using Analyzer. I can pull the report when I'm in Excel, but when I go into Analyzer and double click, I get the related content box to open, but no links to the drill through report. I did some searching on the Hyperion support site and found an entry in the knowledge base that said the Grid API option had to be turned on for this functionality to work. Of course there was no mention of how to turn the Grid API on and I have not been successful in finding anything in the install guide or the admin guide. I'm using Essbase 7.1.5 with EIS 7.1.2 and Analyzer 7.2.5. Is anyone using Analyzer to successfully pull EIS drill through reports? Did you have to turn on the Grid API option? How is this feature turned on? Or, any other suggestions? TIA

Hi, I am also facing few issues related to AIS: I am unable to use Drill Through (1) Smart View: It is asking for Connections and i am unable toprovide Shared Services Provider Information. It throws an error.In case i use URL as add feature then it asks for credential butstill no luck (2) Then i tried to used Add-In Excel and (This is my 1st time):When i double click on the data figure based on Intersaction leveli defined, it is taking me LRO's and now i don't know hoe toproceed further Can anybody help me?

EIS Drill Through Reports

Hi,
Working with Drill Through reports on essbase 9.3.1. I have defined 10 drill thru reports in EIS because of mulitple hierarchies in some dimensions that needed to be specified. I created 1 from scratch and then copied it and modified OLAP intersections as needed, typically it was just 1 dimension that I needed to delete and re-add using a different child.
Some simple drill thru retrievals are working just fine, while others are causing me to receive an error...
{ESSNET MESSAGE} Network error [10054]: Cannot Send Data
Why would some report retrievals work, and others get this message?
Any ideas?
TIA,
Robert

Not a problem.. http://timtows-hyperion-blog.blogspot.com/2007/12/essbase-api-error-fix-geeky.html
Remember, you have to reboot the machine(s) where you make changes for them to take effect.. If your EIS server is also Windows (and on a different server), do the same thing there.
We see this issue all the time with the Outline Extractor as it makes many, many requests to the Essbase server (and each one uses a port that is not released by Windows for some time).. In fact, I am currently writing some new caching functionality into our Dodeca-Essbase server and am putting a configurable delay into the code so the code doesn't call the server too quickly (but, of course, this is something that runs in the background, so performance isn't a huge issue in that case)..
Let us know if it fixes your issue.
Tim Tow
Applied OLAP, Inc

Drill-Through reports in EIS 7.1.X

Hi, We had some problem migrating to EIS 7.1 from 6.5.4. EIS seems to ignore all the dimension tables defined in the model whenever executing the drill-through reports, and only using fields in fact table in the "where" clause. The same report/"intersection points" works perfectly in 6.5.4.

Hi, I am also facing few issues related to AIS: I am unable to use Drill Through (1) Smart View: It is asking for Connections and i am unable toprovide Shared Services Provider Information. It throws an error.In case i use URL as add feature then it asks for credential butstill no luck (2) Then i tried to used Add-In Excel and (This is my 1st time):When i double click on the data figure based on Intersaction leveli defined, it is taking me LRO's and now i don't know hoe toproceed further Can anybody help me?

Can't access drill through report from add-in

I've created a drill through report via Essbase Studio. I tested it within the Studio application and then associated it with a model. To be extra sure, I even deployed the members to the outline and reloaded data to the cube. However, when I double click a data cell in the Excel add-in, I do not see the linked object drill through report. I've made sure the linked objects check box is marked under options (in the add-in). I've got full Essbase rights to the cube and I am a cpAdmin in Studio (though I even added cpViewer, just to be sure). Anything I could be doing wrong, or is there a setting I'm missing somewhere?
I appreciate any help.
Thanks,
Matt

Yeah, its an older version of the add-in, 7.1.2. I've poked support to see if it is possible to drill through from that version to a drill through report created in Studio 11.1.1.3--my client has quite a few users using older versions of excel due to legacy apps. They will have smart view installed, but its not up and running yet, so I can't test it with that.
Thanks,
Matt

Drill through reports are not working fine in share point server

I Have a master report with four parameters and child report with two parameters
I deployed these two reports in share point server , my scenario is i am navigating from my parent report to child report using action (Drill Through Report Concept)
First i clicked on parent report it will ask select parameters , i have selected all parameter and click on apply in share point it will display the parent report content .
In parent report i have link to navigate child report . if i click the link it will redirect to child report and displays the child report content perfectly. upto this step every thing working fine now problem is comes to picture
I have back to in my child report when i click the that button it redirects from child to parent
But earlier selected parameters values are lossed and the parent report again asked for me to select parameters
Can you please explain me because we have migratiojn from ssrs report manager to share point .

Hi All,
Finally i got the solution there is small difference between SSRS Native mode and share point integrated mode
To overcome this issue explicitly we have to change our report expression code for SharePoint Integration mode before deployment. We have to change URL
Preparation code in the expression in report.
Below is the sample URL
="http://<<site url>>/ReportServer/RSViewerPage.aspx?rv:RelativeReportUrl"+"=/ssrs/INT/Report.rdl&rp:parameter1="+CStr(Parameters!parameter1.Value)+"&rp:parameter2="+CStr(Parameters!parameter2.Value)+"&rc:Parameters=True"
The only difference between our SSRS Report manager report expression and share point integrated mode report expression is
“rp:”
value prefixed with every parameter.
After fixing this code I am able to see the previously selected values in Parent report below are the screen shots

How to display the drill through report in a new browser seperate window

Hello All,
I am working on a drill through report which should run when I select the column value from the main report. The drill through report I am working on is Centerline Validate Angles for a specific line. It has 2 parameters, Pods ID and Angle. Main report supplies
these 2 values. Right now, I am having an issue in displaying the drill through report in a seperate window. I have selected Go To URL option from the text box properties in main report and gave the expression as
="javascript:void(window.open('http://vmaidbdev1/Reportserver?%2fADN2%2fPipeline%2fCenterline+Validate+Angles+For+Specifi+Line&rs%3aCommand=Render&PODS_ID="&Fields!LINE_ID.Value &"&Angle="&Parameters!Angle.Value
This is not working. The field in the main report is clickable but when I click it is throwing me error as Reporting services error. Could any one let me know if there is any error in the above expression or anything I need to add or correct.
Please help. Thanks so much.

Hi srisql,
Sorry for the delay in getting back to you.
After double-check the URL which I posted, I find that I have made some error in it. As you can see, there are some spaces in the URL. So please try the following expressions to check the issue again.
Angle parameter is a multi-value parameter:
="javascript:void(window.open('http://vmaidbdev1/reportserver?/Adn2/Pipeline/Centerline Validate Angles for a specific line&PODS_ID="& Fields!LINE_ID.Value &"&Angle="
&Join(Parameters!Angle.Value,"& Angle =") &"','_blank'))"
Angle parameter is a single-value parameter:
="javascript:void(window.open('http://vmaidbdev1/reportserver?/Adn2/Pipeline/Centerline Validate Angles for a specific line&PODS_ID="&Fields!LINE_ID.Value &"&Angle="&Parameters!Angle.Value
&"','_blank'))"
The following general URL is for your reference:
="javascript:void(window.open('http://server_name/reportserver?/folder/ folder/report_name&parameter_name="&Fields!field_name.Value &"&parameter_name="&Parameters!parameter_name.Value
&"','_blank'))"
If you have any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Drill through report

Hi Friends,
I am new to this blog. I have a quick question using drill through report. I have deployed BSO cube using EAS / rules files. I want to create a drill through report. I know how to create a drill through using essbase studio but not from EAS. Please advice.
Thanks
Andy

It will be available to the participants of the conference. (it is already posted, but I have changes to upload). I'm not sure when ODTUG will make presetations generally availalbe. IT is not typically for a number of months. Also although the presentaion sildes have information, there is a lot of verbage to go along with it. I'm sure it will end up as an interRel webcast later in the year, but I would not know when. I'm sure none of this helps you. but it is a bigger topic than applicable to the forum

Error with Downloaded Excel Drill Through Report

Similar Messages

Maybe you are looking for