Error with ECC 6.0 and Solman Ehp1 on same system

Hi,
     I implemented Ecc 6.0 on Windows server 2008 and sql server 2005. Then i installed solman 7.0 ehp1. I had used athe vbscript for solman key which was available online.  i Created two seperate SID for them and DBSID but using the same instance of database.
After successfully implementing both of them only one runs fine at the same time.  Either ECC or solman will run disp+work.exe of one of them gets stopped.
Can someone help me out with this?
Edited by: Dshah_EnCrisp on Aug 2, 2009 6:28 AM

Hai,
Try to check the Memory requirements, post the dev_disp, dev_w* files for our analysis.
As you said that you have single DB for both the systems, did you follow the installation steps carefully for MCOD systems.
Regards,
Yoganand.V

Similar Messages

  • ESS implementation posibility with ECC 6.0 and EP 6.0

    Hi ,
    To implement ESS with ECC 6.0 and EP 6.0
    Any body can suggest for this implementation feasibility and  possibility.
    What are the Business packages has to down load and where can we get those BPs.?
    After importing into EP 6.0 , what are the configurations and settings required to get SAP HR screens/ivews (preview when we create after systems in EP),
    What are the prerequisites and hardware and software requirements for 8000 users (apprx) ?
    Any version upgradations are required for implementing this or
    can we use this ECC 6.0 as backend and EP 6.0
    and please help required for all those things.
    Thanks
    Kumar.

    For ESS/MSS based on ECC 6.0 (ERP 2005), you can download the XSS business packages from     
    service.sap.com/download --> Support patches and packages --> Entry By application Group --> SAP Application Components --> SAP ERP -->      
    SAP ERP 2005 --> Entry By Component --> SAP XSS --> (SAP ESS 600, SAP MSS 600 and SAP PCUI_GP 600).     
    You can use JSPM to apply these business packages on to the portal. To use JSPM, you have to login to the portal server using <SID>adm to be able to use the JSPM tool.     
    Business Packages and components in it: you BP consists of the 2 following parts
    1) BP_ERP5ESS / BP_ERP5MSS is Portal Business package which consist of iview, pages and roles.. while SAP_ESS / SAP_MSS. is WebDynpro part of it.           
    These iviews will direct to some WD application which are part of SAP_ESS / SAP_MSS. and they are deployed on server.          
    2) you have to simple go to          
    service.sap.com/downloadSupport patches and packagesEntry By application GroupSAP Application ComponentsSAP ERPSAP ERP 2004/2005--Entry By ComponentSAP XSS          
    pick the correct version and download. You get full package not incremental. Old ones will be overwritten when you deploy them. try to download them again if it failed first time.          
    3) Refer note 761266 for package compatibility.

  • Airport Utility `install failed' error with both 6.0 and 6.1

    Hi folks
    I am running Mac OS X Lion 10.7.4 (11E53) and cannot get the Airport Utility to run at all. [5.5.3] The application icon flickers as though it is about to launch and then nothing happens.
    I have tried other 5.x downloads and they all fail because I am running OS X Lion 10.7.4.
    Doing a standard Software Update or using a download of 6.x from the Apple Support site, the installer comes up with an `install failed' error with both 6.0 and 6.1, having gotten through the complete process and looking like they were `successful'.
    It's the only time in two years and many updates later that i have come across this issue, so I am unsure how to start to tackle it.
    Any ideas or suggestions please?
    Thanks in advance.

    Welcome to Apple Communities
    Backup your files and try this:
    1. Reboot from recovery partition (or as in my case USB recovery drive)
    2. Select Re-install Mac OS X
    3. Allow the process to run through multiple restarts
    4. When reinstall process is complete run software update (side note, my software update would not launch as long as my USB recovery stick was plugged in, weird)
    5. Run all updates saving the Airport Utility 6.0 until last.
    6. Install the airport utility from software update.

  • Error with Title i.d. and password in app builder

    Hi;
    Ive just subcribed to Pro edition DPS and am starting to build my viewer app, however im getting an error with Title i.d. and password in app builder
    It says niether the title id or password are valid, however they are the same as i've used to both log into app builder and to upload my folios to the folio producer.
    What am i missing here?
    Scott

    Yes, the account administration stuff is confusing when you jump from a "creative" account to a Pro account. As the Getting Started guide states, when you set up your Pro account, you should use dedicated Adobe IDs, such as [email protected] and [email protected], not [email protected] The Copy Folio command makes it easy to transfer folios from one account to another, especially if you do it on the same machine you used to create the folios. Everything moves over nicely.
    Again, don't use your "master" account for creating and publishing folios. Use it only for account administration.

  • Data Consistency when Copying/ Refreshing ECC 6.0 and SRM-SUS 5.0 Systems

    Hello,
    We are planning a refresh / system copy of an ECC 6.0 and SRM-SUS 5.0 system
    The refreshes will be completed from backups taken of production systems refreshed onto the QA Landscape.
    I have referenced the following SDN thread that provides some guidelines on how to refresh R/3 and SRM systems and maintain data consistency between the systems using BDLS and changing entries that correspond to backend RFC destinations:
    [Is there a process/program  to update tables/data after System Refresh?;
    This thread is fairly old and relates to earlier versions of R/3 (4.7) and SRM (3.0).  We have heard that at higher system versions there may be technical reasons why a refresh canu2019t be performed.
    Does anyone have experience of completing successful refreshes of landscape that contain ECC and SRM systems at higher SAP versions (ideally ECC 6.0 and SRM-SUS 5.0)  Does anyone know whether it is technically possible?
    Are there any additional steps that we need to be aware of at these higher SAP versions in completing the copy to ensure that the data remains consistent between ECC and SRM?
    Thanks
    Frances

    I have seen this somewhere in the forum: See if this helps you
    BDLS: Convertion of logical system (SRM).
    Check entry in table TWPURLSVR.
    Check RFC connections (R/3 and SRM)
    SPRO, check or set the following points:
    Set up Distribution Model and distribute it
    Define backend system
    Define backend sytem per product category
    Setting for vendor synchronization
    Numbe ranges
    Define object in backend sytem
    Define external services (catalogs)
    Check WF customizing: SWU3, settings for tasks
    SICF: maintain the service BBPSTART, SAPCONNECT
    SE38:
    Run SIAC_PUBLISH_ALL_INTERNAL
    Run BBP_LOCATIONS_GET_ALL
    Update vendor BBPUPDVD
    Check Middleware if used.
    Run BBP_GET_EXRATE.
    Schedule jobs (bbp_get_status2, clean_reqreq_up)
    Convert attributes with RHOM_ATTRIBUTE_REPLACE

  • Strange problem with SQLPLUS when client and server on the same box

    Hi,
    I have the problem with SQLPLUS when clinet and server on the same machine.
    With client and server on the same machine i am running the command
    sqlplus -l username/password@connect_identifier as SYSDBA.
    With this command, even if you pass in wrong username or wrong password or both as wrong you can able to connect to database and execute queries.
    Once Connect_identifier is correct and trying to log in as SYSDBA ,sqlplus will log in to DB with any username and password.
    How to get rid of this behaviour. Is there any way to do this.
    I am running this command by creating a process in C#
    Edited by: user11000236 on Jun 16, 2009 10:31 AM

    user11000236 wrote:
    Thanks for the info.
    How does Oracle/SQLPLUS allows any username or password to log in to DB with SYSDBA Privillages? What is the concept behind this.?
    This is explainted in the above mentioned link:
    Operating system authentication takes precedence over password file authentication. If you meet the requirements for operating system authentication, then even if you use a password file, you will be authenticated by operating system authentication.

  • Configuring tomcat and apache on the same system

    i need to configure tomcat and apache on the same system.
    first i have configured apache and it is working well.
    Next is have configured tomcat and it is working well.
    i need to interlink tomcat and apache. so i downloaded jk connector and i have configured it.
    i gave an entry in the httpd.conf as
    Include /tomcat/conf/auto/mod_jk.conf
    i have copied the file mod_jk.so to /usr/local/apache/libexec/
    went i start apache after the entry is given it gives the error like this
    cannot load /usr/local/apache/libexec/mod_jk.so into server: ld_so.1. /usr/local/apache/bin/httpd: fatal : libgcc_s.so.1 : openfailed : no such file or directory in linux
    please help to configure this.
    i have done every thing as it is in apache.org documentation. please give the complete configuration. some say that tomcat is not compiled according to apache1.3. but i configure jk connector as --with-apxs=/usr/local/apache/bin/apxs
    send me the reply
    thankqs in advance

    Hi,
    I'm working in a linux machine and choose to use also two different users. Of course I'm using two different ORACLE_HOME directories.I think that the best approach.Just a question ,are you keeping the "GROUP" same or different?
    Anand

  • NetWeaver 7.0 and ERP to the same system

    Hi,
    We currently have a SAP ERP Development system with SAP ERP 2005 (ECC 6.00, kernel 7.00) with ABAP only (not Java).
    We would like to install a Business Intelligence (BI) system but we don't have any other available server.
    I would like to know if it is possible to install SAP Netweaver 7.0 (including BI) in the previews mentioned system. Is there a Guide available?
    The second question that I have is if it is proper for BI to have a development and a production system?
    Thanks.

    Hi,
    check the other thread if it can help you,
    ECC and BI in the same system
    For BI, you may have only ABAP or both ABAP+JAVA. in case of only ABAP you can't use the BI functionality on Java. Now what functionality you would get extra in BI-Java, check here..
    http://sapport.blogspot.com/2008/03/business-intelligence-java-components.html
    Regards,
    Debasis
    Edited by: Debasis Sahoo on Apr 16, 2009 10:59 AM

  • Can I run Photoshop CS4 and CS5 on the same system?

    I read somewhere a zillion years ago (right?) that you coould run CS4 and CS5 on the same system but at the time I wasn't even considering it.
    Run on the same system - not ness to run at the same time
    Or should I install it on a seperate drive (bootable) and go that route. What has everyone found to work and/or not work?
    Thanks in advance for your help
    BJ

    Yes, you can run CS4 an CS5 on the same computer.  They install in different folders and don't get in each other's way.  As a matter of fact, you will find many posts in this forum from the experts recommending to keep CS4 (or an earlier version) when installing CS5.  This way, there is no danger of losing any older plug-ins you may have that aren't compatible to CS5.
    When I installed PS CS5 I had problems with my scanner driver.  Instead of spending loads of time fixing that problem, I just use PS CS4 when I want to spend an afternoon scanning things. I'm not recommending that "lazy man's" solution, but it is an example of how CS4 and CS5 can be used on the same system.

  • Install ECC 6.0 and Solution Manager on same server Error (MaxDB/Linux)

    I have installed Solution manager on one server and then ECC 6 also in the same server with another SID. during the installation it errored out at phase "SLD configuration" with UME error , J2EE_ADMIN locked etc..we checked the user id and noticed it got locked in ECC 6 system and we unlocked it.
    But after the ECC installation the solution manager java engine is not coming up error with "com.sap.security.core.ume.service failed" error. Prior to the ECC installation the Solution Manager J2EE was working.
    thanks in advance
    Mathew

    error in the /j2ee/cluster/server0/log/defaultTrace.1.trc
    is as follows
    #1.5#00137256A483001E0000001700006F190004163784D40864#1150327614343#com.sap.engine.core.Framework##com.sap.engine.core.Framework#######SAPEngine_System_Thread[impl:5]_61##0#0#Fatal#1#/System/Server#Plain###Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.#
    When I looked at using jcmon the dispacher is up and the server0 and SDM is down

  • Query Engine report error with Crystal Report 9 And MS SQL SErver 2000

    Hi,
    Currently I m doing a report with Crystal Report 9 and MS SQL as back End.I used a stored procedure to fetch data from DB.The Stored procedure works properly with query analyzer . But when I take report through application
    "Table Not Found" Error is coming.Later I Found that In stored procedure for certain conditions only this error comes.But I cant resolve it.
    Can any One check any pblm with this query
    ELSE IF ISNULL(@intSourceID,0) = 10 Or ISNULL(@intSourceID,0) = 11 Or ISNULL(@intSourceID,0) = 12 Or ISNULL(@intSourceID,0) = 13 Or ISNULL(@intSourceID,0) = 14  
    BEGIN
    IF ISNULL(@intSchemeID,0) <> 0  
    BEGIN
    Select* From table
    END 
    ELSE IF ISNULL(@intSchemeID,0) = 0  
    BEGIN
    Select 
    END 
    END
    When I comment the above codes , report works fine....
    Can any one help me....plz....I m in such a critical situation...

    Hi,
    Currently I m doing a report with Crystal Report 9 and MS SQL as back End.I used a stored procedure to fetch data from DB.The Stored procedure works properly with query analyzer . But when I take report through application
    "Table Not Found" Error is coming.Later I Found that In stored procedure for certain conditions only this error comes.But I cant resolve it.
    Can any One check any pblm with this query
    ELSE IF ISNULL(@intSourceID,0) = 10 Or ISNULL(@intSourceID,0) = 11 Or ISNULL(@intSourceID,0) = 12 Or ISNULL(@intSourceID,0) = 13 Or ISNULL(@intSourceID,0) = 14  
    BEGIN
    IF ISNULL(@intSchemeID,0) <> 0  
    BEGIN
    Select* From table
    END 
    ELSE IF ISNULL(@intSchemeID,0) = 0  
    BEGIN
    Select 
    END 
    END
    When I comment the above codes , report works fine....
    Can any one help me....plz....I m in such a critical situation...
    Refer the above statement highlighted in BOLD. That statement is WRONG. Select what ???? Try any one of the below statement,
    select ''
    --or
    select 0
    --or
    select null
    Regards, RSingh

  • Initial Print jobs 'communication error with device'. Pause and restart job

    So, I have an odd variant of the Leopard print problem; on 3 separate systems.
    When I print to an HP Photosmart C7180, which setup fine, which I can scan to fine, the print job throws an error :error communicating with device, switch on and off' and so forth. It does that from any app, and consistently. I am printing via bonjour, the printer is networked, but on a static IP.
    To fix this EVERY-TIME I PAUSE printer, then start printer again. It immediately starts working, consistently until I sleep, log out, or don't print for a while.
    This seems to be some timeout issue or such. I tried IP printing, but no difference.
    Resetting the print system also did not help.
    It's not catastrophic but sooo annoying. Any input appreciated!
    Thx,
    Dan

    Hello SunnygirlQ. Welcome to the Apple Discussions!
    Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
    To see if your printer is compatible, take a look at this iFelix Unofficial AirPort Printer Compatibility link.
    If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
    Also you can try this Apple Tech Support article to see if it will help:
    o Printer troubleshooting for AirPort Extreme and AirPort Express
    I assume that this printer works just fine when it is connected directly to your Mac ... correct? If so, has it worked when connected to the AX in the past ... or has it always had this problem? If it did work correctly before, did you do any updates, especially to the AX, recently?

  • "empty file" error with CS5, linux server and mavericks

    hello to the community,
    i'm the owner of a small online marketing agency.
    we have been using different macs here since 10.6. until mavericks with adobe CS 5 and a linux server for years.
    today i got a new MBP retina with mavericks and since now i have the following problem:
    - when i try to open a photoshop file on the server i get a "file is empty" error, when i open an illustrator file on the server illustrator crashes und when i open a pdf on the server with acrobat pro there comes a message that the file is corrupt. with acrobat reader i can open it.
    - i can open the exact files with all apps when they are on a local storage not an the server
    - i can open all files on the server with another mac with os x 10.6.
    so there must be a problem with the combination cs5-files, server and os 10.9. it's weird because with my old MBP i with also using mavericks and there was no problem.
    can anyone help me? it's really a problem!

    i found a workaround that seems to work!
    instead of connecting to the server with "smb" i connect with "cifs". so i force mavericks to connect using the old smb 1 instead of the buggy smb 2.

  • BPEL: invalid namespace error with DB adapter polling and java embedding

    Hello
    I'm using bpel 10.1.3.1.0, and I'm experiencing the following problem: I'm am not able to use the SetTitle() function in a process which polls for records using the db adapter.
    Steps to reproduce the problem:
    - I create a very simple bpel process which poll for records in a table.
    - I deploy it, write manually a record in the polled table and the process start.
    - I can see the record picked up through the visual flow in the console
    - everything looks ok and the process ends correctly
    - now I add a java embedding activities just after the receive
    - I set the instance title like this: setTitle("Go");
    - redeploy, write a record in the polled table and the process start.
    - but the process ends in error with the following message "XMLDOMException has been thrown. invalid namespace for prefix xmlns"
    And there is no way to make it work. Consider:
    If I put the same java embedding activity in another process, for example a simple asynchronous process which just copy the input to the output, and I run from the console, the instance title is set as I want ("Go")
    If I remove the three lines from the polling process
    <bpelx:exec name="Java_Embedding_1" language="java" version="1.3">
    <![CDATA[setTitle("Go");]]>
    </bpelx:exec>
    then the process is executed correctly again. I add them again and then namespace error.
    Whatever statement I put in the java embedding activity (for example a string concatenation or even just a comment I have the same result: invalid namespace for prefix xmlns.
    Does anybody has a suggestion to evercome the problem? I need to set the title because its a mess to find out which instance processed a specific record.
    Thanks by
    Paolo

    I made a lot of further tests, and I can say the problem is related only to the database adapter polling mechanism.
    If I create an asynchronous process, with any kind of database activity (for example select) I can set the title normally.
    If I create a process which start with database table polling, then I cannot use the java embedding.
    try this:
    - create BPEL empty project
    - drop a database adapter service and follow the wizard:
    - select a connection (I tried both oracle or sqlserver connection)
    - select "poll for new or changed record"
    - select any table empty or with few record inside (1 or 2)
    - press next 4 times
    - chose delete record after read (press next)
    - chose order by "no ordering" in polling options (press next 2 times)
    - now drop a receive activity on the process, and connect with the polling partner link
    - drop a java embedding and write any valid java statement
    - deploy; if the table is empty, write a recod in the table
    - the process is instantiated, but the it fails in the --> receive <-- activity with "invalid namespace" error

Maybe you are looking for