Error with factory calender

Hi,
When i try to run Tcode MD04, i am getting an error
3,297 date comes after end of valid factory calender (Please correct).
How to solve this problem?
Karthik

HI
the requiremnt's date related to the material are morathan the
factory calender valid uo tp year.
becouse of this sytem will throuh the message.
so yo increase the validity of your factory calnder.
go SCAL and select factory calender radio button and click on change, there you can increa the year.
-ashok

Similar Messages

Invalid factory calender or error in factory calender

Hi,
invalid factory calender or error in factory calender 26.05.2008
I'm getting this error during STO in VL10B,
I've checked the fac. cal in t-code OX10 it is
K1 - genaral calendar for comp'y
But in shipping point of that plant Fac. calender is IN- India
Should i've to change fac. calender as k1 in shipping point of that plant.
whtr this can i directly change in production server or can i change in dev. server and transport the request to prod. (which is perferrible).
if this is not right, Kidly guide me the right way to resolve this

Hi
Please change the Factory calendar for the Shipping point in DEV & then transport the same to QA & PROD.
Thanks & Regards
Kishore

Factory calender issue

Hi all,
Here goes a problem with factory calender in project systems.
The Project performed by the client are flexible. in some projects they work considering sunday as holiday and in some cases they work on sundays.
we have only one plant assigned to the projects which has only one factory calender assigned. e.g plant 1000 to factory calender F1(considering sunday as holiday)
when i create a new project if i change the factory calender at project definition to F2(considering sunday as working) and then if i go futher creating activities. system will still take the default factory calender assigned to plant i.e F1 and not F2.. the factory calender F2 can be seen in project definition, wbs element and activities.
but when i change dates at network header level and try to schedule.. system is considering factory calender F1.
can anyone pls tell me how to solve this problem.
thanks in advance,
steve

Please go to work centre --- capacity --- assign required calendar there.
As in the activity calendar will be picked up from work centre

Invalid factory calender error in creating subcontrating po

hello all,
during creation of subcontracting po,system shows the error message "invalid factory calender error".
i have checked the assignment in oy05.seems ok.
pls provide some input.
regards
sumit simran.

Hi,
Please check the path.
IMG>Enterprise Structure>Definition>Logistics - General>Define, copy, delete, check plant-->Define Plant.
Here you can find the which factory calender is assigned to your plant.
Then go to Tcode SCAL , select the Holiday calender and edit it . Double click on your holiday calender and change it i.e valid From year to To year. Go back , select the factory calender and edit it , give valid From year to To year.
Thanks.

Invalid Factory Calender error

Hello gurus,
While making a subcontracting PO, the following error is coming "Invalid factory error or error in the factory calender"
I have checked the plant settings & have put Factory calender IN for the plant. Still the error is coming. How to resolve this?
Regards
Prashant

>
prashantjalgi wrote:
> The validity is from 1996 to 2010.
>
> If I try to extend it to 2011, the system is not allowing.
>
> The same error is coming when the validity is 1996 to 2010.
Why is it not allowing? what error do you get when trying?
Calendar maintenance is done thru CUNI, and cusotmizing is usually done in development clients.

Create a plane with a own factory calender

Hi,
I would like to create a plan with our own factory calender. (spro-entreprise structure-definition-logistic general-define plan) Because we have some particular free days in the company the system already has some factory calender but we need our own one.How can I do
Thanks
Dede

I' ve the result.
With the Code "SCAL" you have to create a public holiday. After that you can choise the holiday kalender and assign the public holiday you have created.
Thanks

Error at the time change factory calender (scal) validity period

Dear Experts
When I tried to change the factory calender Valid period with t code scal Fr. Year 1996 to Year 2011, it probe me the message "Please enter validity area between years 1995 - 2010." and I wasn't allow to save.
Pls advise how to solve the above problem.
Thanks.
BK GAIKWAD

hi
your issue is clear that the factory or plant cllendar is defined for only 5 years 2005 to 2010
NOTE: pleaase contact your HR or FICO consultants for this issue & dont change any thing in PRD then you will be responsible for it
hope this clears your issue.
balajia

Factory calender importance in Sales Organisation.

Hi Experts,
Hope you all doing Gr8t.
Please let me know the importance of specifying Factory calender while defining the Sales Orgination.
Thanks & Regards,
Smithun.

Hi
Factory calendar specify the work days at the customer's site .These calendars are used to determine when a delivery must take place in order for it to reach the customer's site on a work day when it can be received. We also use the factory calendar in consolidated invoicing. That is, if we specify that only one day a week is a working day for our customer ,the billing documents are only to be created for that one day each week, causing delivery documents to be consolidated into one billing document.
You maintain the factory calendar in IMG in T code SCAL and assign the factory calendar with plant and also sales org in Img while defining the plant in the Enterprise structure .If you donu2019t maintain it and make the standard order you will get an error-"Factory calendar missing or error in factory calendar".
Factory Calendar decides the holidays for the plant.
Sales order flow to production order and based on the factory calendar material availability will be confirmed to the customer.
Production planning/Scheduling will happen based on Factory Calendar
Regards
Raja

Customizinbg Adaptor Object to download the Factory Calender

Hi there,
can anybody help me with the download of the Factory Calender from oure R/3 to CRM 2005?
I'm searching for a Customizing Adaptor Object. Is that correct, or is there another way to synchronize the booth calendars?
The problem is, that in TR SMW01 I have an error in one bdoc which tells me that I have a problem with the fabric calendar.
Thanks a lot for your help
Greets christian

Dear Christian,
There is no download object to move the factory calendars from R/3 to
CRM. To have the correct description appear for your custom factory
calendar on CRM, you would have to manually recreate the entries in
table TFACD on the CRM system. The CRM IMG path is General Settings
-> Maintain Calendar.
Or you may transport acalendar data within a system landscape,
aplease check note 538344 and related notes.
Regards, Gerhard

Factory Calender taking wrongly

Dear Experts,
                     We have extended the factory calender which are assigned to the plants. But after New year the system is thrwing error like " Date lies after factory Calender 01", even though we assigned another factory calender and holi day calender..? This is happening to particulary one plant in one server. All other servers are OK .Then We extended the 01 calender in the development then it is OK. I want to know why system is considering 01 calender instead of assigned calender???
Regards,
Praveen_sap

Dear Experts,
                    Thanks fopr your reply..!
                    The Only one calender is defined and found one Definition only. As SAid by one of our expert there be BUFFER problem as SAP also suggested to refresh the FACTORY CALENDER as it is ending with 2010 year.
                    My Problem got solved as We updated/extended the 01 calender eventhough it is not attached to any plant.
                    My question is Why Particular Plant only behing like this ? If any BUFFER problem is there it will be applicable to all the Plants in that Server. I am getting this error when creating Sales Order (VA01).
                    For this I raised a request Note to SAP.My problem got solved Can I open this question as unanswered or Can I close it as I got solution ? Please Let me know Sir.
Regards,
Pravs.

ME078 delivery date outside period covery by factory calender

Hi All,
I am trying to upload some PRs and I have maintained delivery date as 05.12.2008 but system is showing the error message ME078 delivery date outside period covery by factory calender.
Please suggest.
Thanks in advance
Pavan

hi,
Check whether the delivery date matches with the that defined in the MMR(MM03) ie. GR processing time...
You can check the factory calender from OB08...check whether the del. is permitted for the given day...
Regards
Priyanka.P

Lead time from catalog does not consider factory calender

Hi,
we are working with SRM 2.0 classic scenario. I have following problem:
We take over lead time from a supplier catalog via OCI in EBP. This works but the lead time does not consider holidays and weekends. How can I activate the Factory Calender?
Thanks Thomas

Hello,
I just sniff arround and found out that EBP 3.0 does not support factory calendar.
You should use BBP_DOC_CHECK_BADI or BADI BBP_CATALOG_TRANSFER and call within this BADI the function modules requesting the factory calendar data via RFC on the backend.
i.e.
get the target system of the follow-on document
    SELECT log_sys from BBP_DET_LOGSYS INTO wa_logsys-log_sys
    WHERE CATEGORY = ls_item-category.
    ENDSELECT.
read table T001WK
    CALL FUNCTION 'META_READ_TABLE'
      EXPORTING
        query_table    = 'T001W'
        logical_system = wa_logsys-log_sys
      TABLES
        options        = options
        fields         = fields
        data           = tabcont
      EXCEPTIONS
        OTHERS         = 1.
fill the internal table xt001w
    LOOP AT tabcont INTO la_tabcont.
      MOVE la_tabcont-content+3(4) TO la_xt001w-werks.
      MOVE la_tabcont-content+61(2) TO la_xt001w-fabkl.
      APPEND la_xt001w TO xt001w.
    ENDLOOP.
    SORT xt001w BY werks.
get the fabric calendar related to the plant
    READ TABLE xt001w INTO ma_XT001W
    with KEY werks = ls_item-BE_PLANT.
check if delivery date is a working day
    CALL FUNCTION 'DATE_CONVERT_TO_FACTORYDATE'
      DESTINATION wa_logsys-log_sys
      EXPORTING
        DATE                 = ls_item-DELIV_DATE
        FACTORY_CALENDAR_ID = ma_XT001W-fabkl
      IMPORTING
        WORKINGDAY_INDICATOR = W_IND.
get an error message if delivery date is not a working date
    IF W_IND = '+'.
CLEAR ls_message.
ls_message-msgty   = 'E'.
      ls_message-msgid   = 'ZBBP'.
      ls_message-msgno   = 'xxx'.
      ls_message-msgv1   = 'error message text, e.g. delivery date not
working date'.
      ls_message-item_guid = ls_item-guid. "assign message to item
      APPEND ls_message TO et_messages.
ENDIF.
endloop.

Tips for blue screen (BSOD) errors with Windows Vista and Intel Turbo Memory on X61/X61s

Important note: The symptoms and solutions described below address only a small subset of the possible causes for blue screen errors, aka BSOD.
This information can help address blue screen errors specifically
related to Turbo Memory, but may not solve errors related to other
issues. Please read through the instructions completely, make sure they
apply to your system, and after attempting the solutions please post
back with your feedback for the community.
Some users may experience random blue screen errors with ThinkPad
systems running Windows Vista with Intel Turbo Memory hardware. These
blue screens may occur during normal usage on the system or they may
occur when booting into Windows Vista. Blue screens related to the
Intel Turbo Memory hardware may reference a stop code of 8086 with
memory address locations of {0, 0, 0, 0}.
There are two main steps that you can take to help resolve blue screen issues related to Intel Turbo Memory.
Step 1: Update Intel Turbo Memory Driver
If the driver version is before version 1.0.1.1004-7.0.3.1001, please
update to this version.
To determine what version of the Intel Turbo Memory driver is installed:
1.    Click Start, then click Control Panel.
2.    Click System and Maintenance.
3.    Click System.
4.    Click Device Manager.
5.    Expand the Storage controllers category.
6.    Double-click Intel Flash Cache Logic Chip.
7.    Click the Driver tab. Then you will see the driver version (for example, 1.0.1.1004).
The new driver and installation instructions can be found here.
Note: The Intel Matrix Storage Driver is updated with this package.
Step 2: BIOS version
If your BIOS version is older than those listed below, please update to the version listed.
How to check your BIOS version:
Turn off the system.
Turn on the system.
While the To interrupt normal startup, press the blue ThinkVantage button message is displayed at the lower-left area of the screen, press the F1 key.
The
BIOS Setup Utility menu will be displayed. If you have set a supervisor
password, the BIOS Setup Utility menu appears after you enter the
password.
Check BIOS Version and Embedded Controller Version.
Turn off the system.
System BIOS versions:
ThinkPad X61 or X61s - BIOS version 1.06 (7NET25WW)
Please
remember that these updates do not solve every possible system blue
screen, but they do resolve several problems related to the Intel Turbo
Memory driver.
Tim Supples
Lenovo Social Media
Got a question? Don't PM me, post it on the forum!
Lenovo Blogs
X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

Dear Tim,
First off, many thanks for the tips for resolving BSOD with Vista + Turbo Memory on X61. I've been suffering from this BSOD for countless times since I bought in my X61 7673-CW9 in April 2008.
Even prior to having the pleasure to visit this wonderful forum, I followed both steps as indicated, and updated my Intel Turbo Memory driver to 1.5.0.1013 and my BIOS to 7NETB4WW (2.14). However, the BSOD recurrs.
For the past two months, I've recovered my system to factory default settings using Rescue and Recovery for over twenty times, each time with the latest Intel Turbo Memory driver and BIOS. Notwithstanding that, BSOD recurrs.
During these painful experiences, I tried two options: 1) making my X61 up-to-date by using System Update and Windows Update (including Vista SP1 or excluding Vista SP1); 2) keeping my X61 the status as factory default (i.e. without updating through either System Update or Windows Update (the automatic/scheduled update function of both is turned off)). In either case, BSOD recurrs.
I'm 100% positive that the BSOD does not arise from any hardware or software/firmware I install. I never install any hardware (e.g. RAM). And, it is not caused by any software/firmware I install: the clear and unequivocal evidence is that at one time,I encountered BSOD while having restored back to factory setting and booting for the first time.
I live in Taiwan, and I seldom heard this BSOD here.  All of my friends (as most of Taiwan residents) using X61 operate in Traditional Chinese environment, whereas I operate in English environment. In Taiwan, when booting for the first time after purchase/recovery, the Windows Vista Business system provides for lanuage choice (Traditional Chinese or English), and, once chosen, the language cannot be altered later on (unless, of course, the system is restored back to factory default settings).
My system specs are the same as the day I purchased it and are listed below (as I'm not sure if my machine type X61 7673-CW9 is applicable outside Taiwan):
Processor: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.4GHz
Memory: 1.00 G.B.
System: Windows Vista Business (32-bit)
Hard Drive: 160 G.B. @ 7,200 r.p.m.
And, of course, with Intel Turbo Memory 1 G.B.
I contacted the Lenovo support staff here in Taiwan for countless times, but they seem to be clueless. I learned that some friends at this forum downgraded their OS back to Windows XP, but I chose not to. The reason is simple: my purchase price for X61 7673-CW9 includes the Intel Turbo Memory, which cannot function under Windows XP (at least so far).
Therefore, I just wish to share my experience here and perhaps I can get some advice from you and other friends here. Any advice will be tremendously and enormously appreciated.
Kevin Chen @ Taiwan

C903 error with Date & Time

Hi all,
First time posting here.
I have a S.E. C903, which has been great but recently developed a fault with the calender/date & time settings. Basically it wont let me set them to the correct time, wvery time I re-set it, it wont save. Ive tried taking the battery out & leaving it for a while, when I power on asks me to set it but wont save. I've tried resetting to factory defaults with the same results. software version is up to date (1214-617 5R1EA032 090501). Any ideas anyone?
Solved!
Go to Solution.

You can try updating or re-installing the software using the SE update service on your PC.

Errors with recovery disk: no wifi

I used the recovery disk; factory settings reboot.... And this happens. It only connects directly to the Internet; no wifi at all. And it won't do windows updates. Now I get this message. I am not sure what I need to do to fix this.
You can see in the photos, there are errors with the Toshiba Modem and the Wifi 5100
Toshiba sent me A300 series revovery disk for Vista Home Premium 64-bit; is that the correct one for A305 S6916 PSAGCU ?
Solved!
Go to Solution.
Attachments:
1.JPG ‏121 KB
4.JPG ‏51 KB

No need to put this everywhere!
Keep it in the thread with my reply.
-Jerry

Error with factory calender

Similar Messages

Maybe you are looking for