Error with HP LaserJet Professional M1212nf print driver on Windows 2008 (32bits) Terminal Server

We got a lot of LaserJet m1212nf printers, installed the SAME driver version on server and desktops and nothing is printed using Easy Print. No errors, no messages but nothing is printed, only when a test page is printed the server show an alert: "No test page can be printed".
After that we try to use the HP driver instead of the TS Easy Print, forcing the group policy to use the Hp driver first. But the terminal server always use the Easy Print driver so we are in the same way.
So we try another thing... THE XPS DRIVER... but it doesn't works on the desktop PC, we try to print a test page from the printer desktop properties but "No test page can be printed" is shown... my god!!!
WHAT CAN WE DO??
This question was solved.
View Solution.

Hello,
Thanks for the post. I've included a couple of links below, one to a document and one to a software download. Hopefully between these two we should be able to get this installed and get you up and running. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01998962&cc=us&dlc=en&lc=en&product=3965849&tmp...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Im-81123-2&cc=us&dlc=en&lc=en&...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Similar Messages

Error Installing Print Driver on Windows 2008 Server R2

I am getting an error installing the Xerox Print driver on Windows 2008 R2. Here is the event viewer detail. Any ideas?
Log Name: Microsoft-Windows-PrintService/Admin
Source: Microsoft-Windows-PrintService
Date: 06/24/2014 10:47:11 AM
Event ID: 215
Task Category: Installing a printer driver
Level: Error
Keywords: Printer Setup,Printer
User: SYSTEM
Computer: IHE-DEV8NEW-11V.Americas.mittalco.com
Description:
Installing printer driver Xerox ColorQube 9303 PS failed, error code 0x0, HRESULT 0x80070705. See the event user data for context information.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-PrintService" Guid="{747EF6FD-E535-4D16-B510-42C90F6873A1}" />
<EventID>215</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>19</Task>
<Opcode>12</Opcode>
<Keywords>0x8000000000000220</Keywords>
<TimeCreated SystemTime="2014-06-24T15:47:11.407265800Z" />
<EventRecordID>82</EventRecordID>
<Correlation />
<Execution ProcessID="1124" ThreadID="3836" />
<Channel>Microsoft-Windows-PrintService/Admin</Channel>
<Computer>IHE-DEV8NEW-11V.Americas.mittalco.com</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<SetupInstallPrinterDriver xmlns:auto-ns3="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://manifests.microsoft.com/win/2005/08/windows/printing/spooler/core/events">
<Label>InternalInstallPrinterDriverFromPackage</Label>
<Message>pfnPSetupParseInfAndCommitFileQueue failed</Message>
<AdditionalInfo>-</AdditionalInfo>
<InfPath>-</InfPath>
<DriverName>Xerox ColorQube 9303 PS</DriverName>
<InstallSection>-</InstallSection>
<ProcessorArchitecture>Windows x64</ProcessorArchitecture>
<PackageAware>Not package aware</PackageAware>
<CoreDriverDependencies>-</CoreDriverDependencies>
<LastError>0x0</LastError>
<HResult>0x80070705</HResult>
</SetupInstallPrinterDriver>
</UserData>
</Event>
Ray Pietrzak

Hi Ray,
On current situation, please refer to the following KB and check if set
Point and Print Restrictions policy to Disabled. Then monitor the result.
Event ID's commonly associated with point and print
restrictions
In addition, I noticed that there was a thread which you created one year ago. It seems to be similar with
current issue. However, please have a look.
Windows
2008 Server
If I misunderstand, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu

Windows 2008 R2 Terminal Server clients lose remote printer queues after logoff

There are similar issues to this already on the forums but not precisely like this as far as I can tell, and I have tried all the fixes mentioned in those other threads.
Windows 2008R2 terminal server connecting to a 2008R2 print server. A script maps a connection to the print server on login. Users can browse the print server, connect to print queues to add them, and the queues work OK at first. As soon as they logoff/login
again, the queues still appear in their list of printers but cannot be selected for printing ('Print' button is greyed out).
Domain administrator users can print OK always; this is only affecting regular-user accounts, so it is probably a security/permissions issue. Print queues configured on the terminal server itself are OK, this only affects the queues on the
print server.
No errors are generated in the Event Logs. No failures seen for the print spooler or anything else.
I have added Everyone with Full Control to C:\windows\system32\spool on the terminal server. Tried giving full permissions to all in the printer properties. Cleaned out all registry keys in Client Side Rendering Print Provider as mentioned in some other
threads. In group policy, client printer redirection and LPT port redirection is allowed, use Easy Print driver first, and the print server is in the Intranet zone for low security. The issue happens for all print queues on the print server with a variety
of drivers so I don't think it is driver-related.

A bad GPO being applied ??
If you isolate a user, remove all GPO (even loopback's one), connect manually to a printqueue to make him install's one. Logoff and reconnect and check again if the printqueue work good. The only right that could block you is the driver's installation, but
I really sure that you don't have that issue (as it would be logged anyway)
The admin. account often have less GPO that apply to him.
MCP | MCTS 70-236: Exchange Server 2007, Configuring
Want to follow me ? | Blog:
http://www.jabea.net | http://blogs.technet.com/b/wikininjas/

BSOD Error Windows 2008 R2 Terminal Server

Hi guys
I have a unique issue on a Windows 2008 R2 Enterprise Terminal Server where it keeps blue screening every so often (from every 2 or 3 days to some times once a week) with the exact same BSOD error. After countless hours Googling and researching I am simply
at a dead end and desperately require some guidance if possible. I have ran malware bytes and other tools and the TS does not have any malware or viruses. I have ran a chkdsk and everything is also okay with that.
It has happened about 5 times now with the same errors every time:
29/05/2014 09:42:18
Bug Check String: CRITICAL_OBJECT_TERMINATION
Bug Check Code: 0x000000f4
Parameter 1: 00000000`00000003
2: fffffa80`243c5060
3: fffffa80`243c5340
4: fffff800`01bc70d0
Caused by driver: ntoskrnl.exe
Caused by address: ntoskrnl.exe+75b80
Processor: x64
I have uploaded the DMP to OneDrive: edit: it won't let me post a link until my account is verified?
Thanks
Dan

Hi,
Thank you for posting in Windows Server Forum.
The problem which you are facing seems to be due to ntoskrnl.exe. There might be some corruption in ntoskrnl.exe file.It’s responsible for various system services such as hardware virtualization, process and memory management, thus making it a fundamental part
of the system. It contains the cache manager, the executive, the kernel, the security reference monitor, the memory manager, and the scheduler.
Please check below articles to fix the issue of ntoskrnl.exe.
1. NTOSKRNL.EXE is missing or corrupt
2. How to Fix Ntoskrnl.exe Missing or Corrupt Error
Hope it helps!
Thanks.
Dharmesh Solanki

DCOM error "1260" on Windows 2008 R2 terminal server when SAP exports data into Office 2007 (Excel or Word)

Hi all,
We are experiencing an issue which happens at random whenever a user tries to export data from SAP into Excel or Word. Excel or Word is started but remain empty. We then see the below errors in the event log. And the problem is very random
as sometimes all they have to do is wait 10 minutes and the next try will be successful. Not even log off/on. Could someone tell me what the error "1260" is saying?     thanks for your help.
Pete
Log Name:      System
Source:        Microsoft-Windows-DistributedCOM
Date:          7/23/2013 4:07:36 PM
Event ID:      10000
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Servername.domain.com
Description:
Unable to start a DCOM Server: {00020906-0000-0000-C000-000000000046}. The error:
"1260"
Happened while starting this command:
"C:\Program Files (x86)\Microsoft Office\Office12\WINWORD.EXE" -Embedding
Log Name:      System
Source:        Microsoft-Windows-DistributedCOM
Date:          7/23/2013 3:54:34 PM
Event ID:      10000
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Servername.domain.com
Description:
Unable to start a DCOM Server: {00024500-0000-0000-C000-000000000046}. The error:
"1260"
Happened while starting this command:
"C:\Program Files (x86)\Microsoft Office\Office12\EXCEL.EXE" /automation -Embedding

Hi,
Based on my research, please try the following:
Click Start, click Run, type regedit in the Open box, and then click OK.
Locate the following registry subkey:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\Notify\termsrv
Under this subkey, add the following registry entries:
Name
Type
Value data
Logoff
REG_SZ
TSEventLogoff
Logon
REG_SZ
TSEventLogon
Restart the Terminal Server computer.
Note: Serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry
before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, please refer to
How to back up and restore the registry in Windows.
Hope this helps.
Best Regards
Jeremy Wu

No Default Mail Client Error with Outlook 2010, Server 2008 R2 Terminal Server, and TAM

We are running a software package on a Windows 2008 R2 Terminal Server called TAM (The Agency Manager) along with Outlook 2010. The application uses a MAPI connection to retrieve mail data from Outlook to be able to send and receive messages inside
the application. On our individual PC's this works just fine, but on the Terminal Server users we get the message "Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook
and set it as the default mail client."
I've tried the steps listed in KB 813745 which tells you to delete the registry keys and run a repair in Office, but that didn't resolve the issue. I've searched on this issue, but haven't found anything useful. Any suggestions would be much
appreciated.

Try to set DEP and add outlook.exe. I had outlook 2007 same problem. With DEP enabled and outlook, word en excel also added to the list it worked again.
You can find it under this computer, properties, then change settings. Click advanced tab and then select the first "settings" option.The click the "Data Execution Prevention" (DEP) and select the last option and add the office programs
there.
Hope this helps.

Cpeaut32: error in formula when print CR rpt 8.5 on terminal server 2008

I have had this similar error in the past when I tried to run an older version of cr (5.0) on a newer pc (xp)and then I had to update some dll's and register them.
Now the same kind of error but different versions of CR and pc software.--CR 8.5 and terminal server 2008
The error reads the same: error in formula (and then code from function in the report where the error occured). "A number, currency amount, boolean or string is expected here... "
The report runs fine on the older terminal server . The program is a VAM application. Any attempt to print report fails (using the preview, print or printer icons)
A solution for a similar problem ( from the sap library ) using CR 8.5 in a Citrix or Terminal Server enviornment was to copy all files from   <systemroot>\Crystal
to
                                                  <systemroot>\System32
But before doing anything i wanted to find out if I needed to update some dlls.   or what is needed to detemine which dll's are causing the problem and what to do about it.

Cpeaut32 is very very old legacy SDK and will not likely ever work on newer operating systems. Upgrade to .NET to get support with recent OS's.

Hp laserjet pro mfp m126nw printing issues in windows server 2008 r2 standard

hp laserjet pro mfp m126nw printing issues in windows server 2008 r2 standard
printer installed but print not coming ...
please give me solutions of this problem

go to http://www.hp.com/go/tools may help resolve the issue.
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
I work on behalf of HP.

Word 2010 - "Connecting to printer" message when opening documents at Server 2008 R2 Terminal server

Our users experience sometimes the message "connecting to printer" while they open a document in Word 2010 (32-bit) on our Server 2008 R2 Terminal Server. This is behavior
isn't consequent but random. The default printer in this environment is a Net2Printer-printerdriver (1.16) which redirects the print jobs (in PDF-format) to the local client's default printer. This feature works well. We don't want to change the default printer
because this is the right one to use by our users.
After a long seeking trip on the internet I've found the Microsoft hotfix KB974991 which can fix this issue for Word 2007. My question is, is this also usable for Word
2010 (32-bit) and if not, is there maybe another fix for the 2010 version available?
Any other suggestions or workarounds are welcome!

Hi,
Please change following options test if it works:
Ÿ
Print proofs quickly
Enable the Draft output option. When you use this option, the document prints with minimal formatting. Therefore, the document
may print faster. This option is ideal for printing proofs.
To enable the Draft output option, follow these steps.
Note Some printers may not support this option.
Start Word.
Click File, and then click
Word Options.
In the Word Options dialog box, click Advanced, and then scroll down to the Printing
section.
Click to select the Use draft quality check box, and then click OK.
Ÿ
Use the background printing option that best fits your requirements
When background printing is enabled, you can continue to work in Word while your document prints in the background. Background printing uses additional
memory, and your document may print more slowly.
When background printing is disabled, your document prints faster. However you cannot work in Word until the print job is completed. If you do not have
to continue to work in Word while your document prints, disable background printing to speed up printing.
To do this, follow these steps:
Start Word.
Click File, and then click
Word Options.
In the Word Options dialog box, click Advanced, and then scroll down to the Printing
section.
Click to clear the Print in background check box, and then click OK.
Best regards
William Zhou
TechNet Community Support

How can I download a Generic Post Script printer Driver for Windows 7 .

How can I download a Generic Post Script printer Driver for Windows 7

We used to install this PostScript printer for previous Windows releases from
(winsteng) and run it to install the driver from the below location
http://www.adobe.com/support/downloads/detail.jsp?ftpID=1500
This doesnt work with Win 7 (The install crashes ) , Basically looking to do the same process with Win 7

HP Lasejet 1160 Printer driver for windows 8.1 64 bit

Need HP Lasejet 1160 Printer driver for windows 8.1 64 bit

Hi,
The drivers are available via Windows Update, follow these steps to install the printer:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/learnUseDisplay/?sp4ts.oid=41061...
Be aware that the printer only support USB connectivity on Windows 8.1, network connection is not supported for the operating system if you use an HP print server:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/learnUseDisplay/?sp4ts.oid=41061...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Cisco aironet 2600 series AP configuration with windows 2008 R2 Radius server.

I want to know the configuration of Cisco aironet 2600 series AP with windows 2008 R2 Radius server.
I have
1. AD & DHCP Server
2. Cisco Aironet 2600 Access Point.
I want to connect wifi devices through this AP. Authentication should be through Radius server and AD.

Hi ,
Below link should support your requirement
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/116584-configure-wirelesslan-00.html
Minimal command : -
AP(config)# aaa new-model
AP(config)# radius-server host 172.20.0.1 auth-port 1645 acct-port 1645 key XXXXXX
AP(config)# radius-server deadtime 10
HTH
Sandy

Adobe ps printer driver for windows vista. Where can I get it?

I need Adobe ps printer driver for windows vista. Where can i get it? Plz help me. If yes, then where and if no, why?
Any help is highly appreciated.
Thanks.

The Acrobat printer produces a PS file that is then sent to the Distiller process to create a PDF. The other PPD you mention is something I know nothing about. However, why would you want to use a different driver? The Adobe PDF driver is optimized for use in creating PDF files and other routes may not produce as good of a result. If the other PPD produces a PDF, then why are you asking about the Adobe driver?

Hp laserjet p2015 series pcl 5e driver for window 7

please help me to install hp laserjet p2015 series pcl 5e driver for window 7. i can't find any proper driver of hp laserjet p2015 series pcl 5e for window 7 .

Please help Me !!!
I Have the problem same as you. I don,t know....

Finding an older driver version for LaserJet Professional M1212nf MFP

Dear all,
I am looking for an older driver version for our HP LaserJet Professional M1212nf printer, since with our SAP-Citrix system I could only print reports from that version. The version is 20100331 (1.0.1.19178). Is there any place where I could find this driver version? If not, is there any way to transfer the printer driver to the new computer?
In the meantime I found the HP FTP path where various drivers can be found: ftp://ftp.hp.com/pub/. However, I don't know where I could find the driver I am asking for. Could please someone help me with this?
Best regards,
Radu

@RaduPopa ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post personal information (serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Thank you for visiting the HP Support Forum.
I work for HP. However I speak only for myself, not for HP nor anyone else

Error with HP LaserJet Profession​al M1212nf print driver on Windows 2008 (32bits) Terminal Server

Similar Messages

Maybe you are looking for

Error with HP LaserJet Professional M1212nf print driver on Windows 2008 (32bits) Terminal Server