Error with IBAN Generation not possible

hello
In transaction XK01, when I create a vendor in bank details I have an error when I add the IBAN. This vendor is Spanish.
If I create directly the IBAN I have this message : " Generation not possible". Why.
But if I create this supplier by entering the first :
- County,
- Bank key
- Bank account
- CK
The iban be generated without errors.
I set this bank in FI01.
Could you help me.
Best regards

hi, I am using ECC500 and I just follow following instructions.
It is working fine.
Cheers
>
SAP Note 503182:
>Solution
>    1. Copy function module SAMPLE_INTERFACE_00003030
> from SAMPLE_INTERFACE_00003030
>    to CONVERT_BANK_ACCOUNT_2_IBAN_ES
>      Function group: IBAN
>      2. Copy function module SAMPLE_INTERFACE_00003040
>      from SAMPLE_INTERFACE_00003040
>      to CONVERT_IBAN_2_BANK_ACCOUNT_ES
>     Function group: IBAN
   >   3. Implement the attached source code corrections.
    > 4. BTE setting:
   >   Transaction: FIBF
>    Settings -> P/S function modules
    > Create the following entries:
     > Event      Country    Function module
      >00003030   ES        CONVERT_BANK_ACCOUNT_2_IBAN_ES
     > 00003040 ES         CONVERT_IBAN_2_BANK_ACCOUNT_ES

Similar Messages

Document Contains Errors. Approval is not Possible.

I have a SC approval that errored out when coming back to SRM. We run RBBP_OFFLINE_EVAL program periodically throughout the day to pick up offline approvals from users. In the spool list, I see this message:
Document Contains Errors. Approval is not Possible. And the system gives me the WI ID, SC # and the object type BUS2121.
I've never seen such an error before. The document here...is it referring to the approval email itself? We instruct our users to not edit the approval email in any way. They just have to click on the approval link and click on Send in Outlook. I don't know if the document it's referring to is the SC or the approval email.
Can anyone help?
SN

Hi,
You are right. This error is the issue. To answer your other question why this message was not raised earlier;the problem could be that at the time of sc creation, there might be sufficient budget. But because your shopping cart was in approval for some time, it is possible that some more shopping carts have been raised with the same WBS and got approved. This would reduce the overall budget available. When the shopping cart is approved, one more check is done by the system and this time there was no sufficient budget.Hence the error is displayed. Only option for you now would be to ask FI people to increase budget or resubmit the cart by changing the value of the shopping cart.
Regards,
Sanjeev

HT201272 connection with itunes is not possible

hello,
because my device was dead, i got a new one. and i want with my old account to download my purchased apps.
i go on device app store, purchased, but when i add my password i get a message that connection with itunes is not possible??
how to solve this problem?

Refer to this article"
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368

I want to upgrade the software (currently I have Mac OS X 10.6.4) but when the mac is downloading the new version i get an error message and is not possible get the most updated software: Mac OS X 10.6.8 or either the most recent itunes why?!?!?!

I want to upgrade the software (currently I have Mac OS X 10.6.4) but when the mac is downloading the new version i get an error message and is not possible get the most updated software: Mac OS X 10.6.8 or either the most recent itunes why?!?!?!

Then you either have a network problem or a hardware problem or a corrupted hard drive. You might try:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
You can also try downloading from another computer on a different network connection.

Error with Transport system not configured that may be related to CHaRM

Who has in depth knowledge on setting up SAP Solution Manager CHaRM. Had an odd problem with the transport system failing when the QA system was shut down for maintenance. Transports were not able to be created or save to. Error message was Transport System not configured. Brought up QA and re-distributed system and Transport group and transport requests started working again.

Hello,
if a system, e.g. QA system, will not be available due to a maintenance task,
we set the status of this system to "temporarily inactive" (see header data in transaction SMSY).
This status allows us, to create new transport requests in DEV-System although consolidation system QA is not available.
(Of course you have to reset the status, when QA-system ist started again.)
Hint: it is not possible to release or to import a transport request, when consolidation system is shut down.
Therefore the developer should pay attention to the messages, which raise in urgent corrections.
best regards
Horst

System Error u0096 Restart is Not Possible!

Hi guys,
I have a sync scenario that calls an http service. When the http service is not available (down) the message in the monitor has a sys error status and the restart is not possible. With an identical scenario, but async, the status is also system error but Manual Restart is possible.
My question is: this is a typical behavior for sync http scenarios? I would like to be able to restart this message, is it possible?
Thanks in advance,
Ricardo.

Hi Michal
Thanks for your quick response.
Im using these sync calls under a BPM and I found a way to reprocess this messages in system error. So, in Message Monitor open the PE and over the task in error (ex. send step) open the work item and go to EDIT menu, in EDIT menu press change and you will see on the left side Services for Administration and something like reprocess after error, press the execute button and the sync calls is restarted.
I believe without BPM is not possible restart sync calls, but with BPM it is
Thanks Michal.
Regards,
Ricardo.
Message was edited by: Ricardo Quintino
Message was edited by: Ricardo Quintino

ABUMN-error "Posting transaction is not possible (Value date not allowed)"

Hi,
When we are trying to transfer asset within company code thru Tcode ABUMN, we are getting a error as
"Posting transaction is not possible (Value date not allowed)"
What actually we are doing is we are trying to transfer the previous year asset for example say 01.04.2007 assets on today.
the Parameters are as below
Document date :26.03.2008
Posting Date :26.03.2008
Asset value date is 01.04.2007.
Then the system is throwing an error and not alloing to post the previous year transfers.
Can any one help me out.
Cheers
Sri

Hi,
I think, if you give old asset value date, system will give you the error. This may be because, you are trying to transfer the assets with old values, means in your examble the dep. from the 01.04.2007 to 29.02.2008 whould have been charged.
So, give the current year date means any date from 01.01.2008 to till date.
If you read F1 help for the value date column, it states,
Asset value date
The asset value date is the value date for Asset Accounting. It can deviate from the posting and document date and be in posting periods already closed for Financial Accounting. However, the posting year and asset value date year must be the same.
Since the asset value date can have a direct influence on the amount of depreciation, the system creates a default value when it can. You can specify in Customizing how the the default asset value date is determined by the system.
Hope it helps
Saravanan.A

Playlist ordering with 4G shuffle NOT possible

It's not possible to sync the order of songs with the 4. Generation of the iPod shuffle. THe shuffle is playing always ordered by Artist.
Changing the order in iTunes and re-sync the iPod doesn't affect the order on the iPod shuffle.
Is this a bug in the firmware of the 4G shuffle or a problem with iTunes?

You can sort all the music that is not in a playlist on your shuffle. It inherits whatever sort you have selected for your entire music library in itunes. To see what I am talking about, do this:
1. Under Library (on the left side of iTunes) click "Music"
2. You now see on the right your entire music library. At the top, click the top of the column you want to sort by. You can right click to add more columns
3. Sort by something different than what you are currently sorting by.
4. Connect your shuffle and wait for it to come up
5. When your shuffle appears on the left, open it and click "Music" and note how it is sorted. The column it is currently sorted by will be darker in its heading and their will be a triangle in that columns heading
6. Now click on the name of your shuffle and click sync.
7. Go back to your "Music" entry on your shuffle and you will see it is now sorted by the column you changed your iTunes music library too.
So, your music on your shuffle will inherit the sort order you have set for your entire library on itunes, when you sync it.
Does that make sense?
i

Errors with Time Machine (not completing backup, and needing to erase the ".inProgress" package)

I have in a previous discussion been talking about errors with my Time Machine backup. The errors were with a problem with Indexing a file, it fails and stops the whole backup. Each time it attemps another backup, it fills my ".inProgress" package with a (nearly) whole backup, filling my Time Machine hard drive, and thus errasing my previous good backups. The error occurs after about 95% completion.
In my last post of a similar disscussion, the problem was indexing the Preference Pane files and this caused the whole backup to fail. This was my last post there: (below in some additional info of my situation)
I did exclude the MobileMe.prefPane. And I got:
12/16/11 9:24:50.468 PM com.apple.backupd: Starting standard backup
12/16/11 9:24:50.556 PM com.apple.backupd: Backing up to: /Volumes/3 TB GoFlex Drive/Backups.backupdb
12/16/11 9:25:14.418 PM com.apple.backupd: Waiting for index to be ready (101)
12/16/11 9:27:02.366 PM com.apple.backupd: Deep event scan at path:/ reason:must scan subdirs|
12/16/11 9:27:02.366 PM com.apple.backupd: Finished scan
12/16/11 9:33:37.119 PM com.apple.backupd: Deep event scan at path:/Volumes/Mac OS Lion GM reason:must scan subdirs|
12/16/11 9:33:37.119 PM com.apple.backupd: Finished scan
12/16/11 9:36:15.650 PM com.apple.backupd: 758.92 GB required (including padding), 830.32 GB available
12/16/11 10:25:14.873 PM com.apple.backupd: Copied 22.8 GB of 630.5 GB, 782749 of 2357620 items
12/16/11 11:25:15.335 PM com.apple.backupd: Copied 86.6 GB of 630.5 GB, 1167675 of 2357620 items
12/17/11 12:25:16.227 AM com.apple.backupd: Copied 152.2 GB of 630.5 GB, 1393795 of 2357620 items
Dec 17 01:25:16 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 305.2 GB of 630.5 GB, 1413946 of 2357620 items
Dec 17 02:25:16 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 457.1 GB of 630.5 GB, 1419190 of 2357620 items
Dec 17 03:19:07 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 1736865 files (568.3 GB) from volume Macintosh HD.
Dec 17 03:25:16 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 572.1 GB of 630.5 GB, 1848939 of 2357620 items
Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Indexing a file failed. Returned 200 for: /Volumes/Mac OS Lion GM/System/Library/PreferencePanes/Mouse.prefPane, /Volumes/3 TB GoFlex Drive/Backups.backupdb/Tom iMac/2011-12-14-171406.inProgress/7DB524DD-EFB9-42A6-8A21-0A2A312EDA6D/Mac OS Lion GM/System/Library/PreferencePanes/Mouse.prefPane
Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Aborting backup because indexing a file failed.
Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Stopping backup.
Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 2164998 files (581.1 GB) from volume Mac OS Lion GM.
Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copy stage failed with error:11
Dec 17 03:40:50 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Backup failed with error: 11
This time it was the Mouse.prefPane that caused the error. I'd like to exclude the entire PreferencePanes directory.
This was my error message this time:
I just realized this was on my small Developers partition. Perhaps there is an error with the build, OR an error with the initial restore. I'd like to perhaps exclude the entire /Volumes/Mac OS Lion GM. I expect that Time Machine is working fine with my main partition and the error happens when it's almost done with the Mac OS Lion GM partition.
The problem now is that I only have 265 GB of 3 TB available on my Time Machine HDD. If attempt another backup, it'll surely erase about 410 GB of my past saved backups. I've already lost 6 months, and I only have two months left of backups. I need to erase the ".inProgress" package again. That'll take time, and it's impossible to do from this main partition, even at root access. This ".inProgress" has a total of two (nearly) full backups; it didn't cleanup the first full backup attempt while starting the second,perhaps it would have had it finished. But I fear even if I exclude the whole "Mac OS Lion GM" partition, It'll create a third full backup before cleanup and erase ~400 GB of previous good backups. Then, I'll have a total of 4 (nearly) full backups! 3 TB is just enough without any past backups.
Maybe I'll just copy my documentations of my 'errasing the ".inProgress" package' last time (from the Mac OS Lion GM partition) and do a full restore of just that partition. Thus erasing the errors all together. If it doesn't fix the errors then this could be a bug in the build that doesn't allow Time Machine to work. I've always included this partition in Time Machine before, even with other Lion builds, so I suspect that it was an error in the initial restore. (I may be answering my own questions, and that the inital restore (of the small partition) is the problem, and I just need to re-restore the small partition)
Again, I'm going to have to erase the ".inProgress" file to regain 1.53 TB of space before proceeding.
Also, I gave myself permission to read the ".Backup.345781513.887697.log", the log that was created last night when I first started Time Machine this last time. It was interesting, but didn't show the error I could see from the console.
Right now, mds and mdworker appear to be going crazy even after I just now turned off Time Machine. I think I'll let it go for the rest of the night. Then I'll work on erasing the ".inProgress" package from the other partition boot up.
That was my entire last post. To add some information, I have two OS X partitons, both Mac OS X Lion. One is my large main partition, the other is one I don't mind testing with. I recently replaced my internal hard drive in my iMac and restored from Time Machine both partitions. This appeared to go smoothly. But I have yet to create a single successful Time Machine backup since. At first it was doing a Full Backup, which I didn't like, but now it just aborts around 95% completion. Each, time, it tries it fills the Time Machine hard drive with duplicate (nearly) full backups errasing my older good backups. I would like to erase the ".inProgress" file to save space.
My main question in this new discussion is does anyone know of a good way of erasing the ".inProgress" file? This is so I can preseerve my previous backups. ACLs and other permissions seem to make it impossible to erase from this startup partition, the one I'm running Time Machine from. Even at root level, if I give myself permission to change permissions or delete a file, it'll say Operation not Permitted instead of Permission Denied. I have been able to delete this ".inProgress" package before when booting from the other partition, but with great difficulty. I have had much help from another Member in this Support Community when it comes to solving my Time Machine problems. I think I have found the problem (indexing files in my small OS X partition), as stated in my copy& pasted post above, but I really need to delete this inProgress package first to save space before continuing!

Pondini wrote:
Gator TPK wrote:
Now I'll have to fix the small partition? How's the best way to do this? There could be thousands of files that won't index fine.
See if there's anything you haven't done, that applies, in the pink box of #C3 in Time Machine - Troubleshooting
Otherwise, since most (or all?) of the indexing errors are in OSX, you might want to just reinstall it. Something may have gone wrong sometime, that damaged those files.
I reviewed #C3 in Time Machine - Troubleshooting and I have already done most of those things. I have just learned something new though:
When I included my Main OS X partition again, I got an indexing error for the first time for that partition. I might be interesting to note that the _spotlight process was running, and it's running again (the magnifying glass has a dot and it generically says "Indexing Tom's iMac"). mdworker, mds and backupd processes really are working hard, one moment they used over 500% of my CPU. It's nice to know for once quad core is good for something other than video encoding. (Now if they could just get the Finder to do more than 100.1%, only 1 thread is doing 100%, I'd like to see file size calculations 8 times quicker!)
I never got an indexing error once in the past 2 weeks for that large Mac OS X v10.7.2 main volume, and it had appeared to finish that partition backup before running into problems with my smaller test partition. Also, I had just updated the smaller test partition with a later build of Mac OS X. But It appears that the beta builds are clearly not the problem. I thought I could just restore again (from the December 4th backup) the small partition and both would be fine.
I'll finish reviewing all the suggestions on Time Machine - Troubleshooting and go from there. Hopefully, the _spotlight indexing simutaniously was the only problem. It's strange that the indexing hasn't happened since the original restore last week untill I finally got a good clean complete partial Time Machine backup. Why would the first Time Machine backup trigger indexing again?
For now, I'm going to exclude the Main Partition again, and let another good backup run. And try your suggestions. (And wait till mds, mdworker, etc. to finish!)
I have the logs of the first two sucsessful backups and the last two failed backups from the last 3 hours, if that would help.?

FBV1 error - Transaction Type 030 not possible

Hi SAP experts,
I am currently facing an issue while in FBV1 (via batch input)
It displays error message Transaction Type 030 not possible (posting to affiliated company), however, the asset group that it belongs to can only be Type 030 (Acquisition in group area only).
How can this be fixed?
Is there another TType that is similar to 030 ?
Any help is welcome
Regards
Roger

Hi,
check SAPNET note 127650.
Best regards

Charts with Makit, scrolling not possible

Hello Forum,
I'm experiencing an issue regarding Makit Charts on Mobile.
The problem is that is not possible to scroll down the page on mobile if the charts is 100% (width and height) and in both directions landscape and portrait.
The chart's container is sap.m.Page and as explained in the official documentation the scrolling is provided automatically.
I attach my code and both images (desktop and mobile).
Hoping your answers could help me.
Thanks.
jQuery.sap.require("sap.m.MessageBox");
sap.ui.jsview("demo.charts.views.Multichart", {
getControllerName : function() {
return "demo.charts.views.Multichart";
createContent : function(oController) {
var page = new sap.m.Page();
var value = new sap.makit.Value();
// var category = new sap.makit.Category();
var category_axis = new sap.makit.CategoryAxis;
var series = new sap.makit.Series();
var bubble = new sap.makit.ValueBubble();
category_axis.setDisplayLastLabel(true);
page.setTitle("Multi Chart");
value.setExpression("Netwr");
value.setFormat("currency");
value.setDisplayName("Revenue");
// category.setColumn("Gjahr");
// category.setDisplayName("Year");
series.setColumn("Bukrs");
series.setDisplayName("Company");
bubble.setStyle(sap.makit.ValueBubbleStyle.FloatTop),
bubble.setShowCategoryText(true);
var chart = new sap.makit.Chart({
// category : category,
categoryAxis : category_axis,
valueAxis : new sap.makit.ValueAxis({}),
series : series,
values : value,
valueBubble : bubble,
categoryRegions : [
new sap.makit.Category({ column : "Gjahr", displayName : "Year" })],
chart.setType(sap.makit.ChartType.Column);
chart.setShowTableView(false);
chart.setShowRangeSelector(true);
chart.setShowTableValue(false);
chart.addColumn(new sap.makit.Column({
name : "Gjahr",
value : "{Gjahr}"
chart.addColumn(new sap.makit.Column({
name : "Netwr",
value : "{Netwr}",
type : "number"
chart.addColumn(new sap.makit.Column({
name : "Waerk",
value : "{Waerk}"
chart.addColumn(new sap.makit.Column({
name : "Bukrs",
value : "{Bukrs}"
chart.setModel(this.oModel);
chart.bindRows("/Chart_DataSet");
chart.attachEvent("tap",function(oEvent){
var isRightMB;
var e = oEvent.getParameter("eventObject");
if ("which" in e) // Gecko (Firefox), WebKit (Safari/Chrome) &
// Opera
isRightMB = e.which == 3;
else if ("button" in e) // IE, Opera
isRightMB = e.button == 2;
if(isRightMB){
var srcObj = oEvent.getSource();
// var srcElem = srcObj.getDomRef();
var temp = document.oncontextmenu;
document.oncontextmenu = function (e){
document.oncontextmenu = temp; // reset back to its
// original state, so that
// other elements still have
// context menu
return false;
var msg = oEvent.getSource().getSelectedCategory();
sap.m.MessageBox.show( msg, sap.m.MessageBox.Icon.INFORMATION, "Chart Right Click - Selected Category", [sap.m.MessageBox.Action.OK] );
chart.attachEvent("doubletap",function(oEvent){
var chartObj = oEvent.getSource();
var msg = oEvent.getSource().getSelectedCategory();
sap.m.MessageBox.show( msg, sap.m.MessageBox.Icon.INFORMATION, "Chart Double Tap - Selected Category", [sap.m.MessageBox.Action.OK] );
var oButton = oController.generateConfigPopover(chart);
var oBar = new sap.m.Bar({
contentLeft : [ new sap.m.Button({
text : "Back",
type : sap.m.ButtonType.Back,
press : [oController.handleNavButtonPress, oController]
contentMiddle : [ new sap.m.Label({
text : "Multi Chart"
contentRight : [ oButton ]
page.setCustomHeader(oBar);
page.addContent(chart);
return page;

Hi,
I don't have "Advanced" tab in Mouse settings in control panel. Is there something i need to install in adition to Toshiba Synaptics drivers?
I also tried changing every available setting in Synaptics drivers settings, but no change :(
About Synaptics generic driver: Yes, I chose that one, but as I said, it's really buggy with two finger scroll, so I reverted back to Toshiba ones.

Recording at 96k with Line6 Toneport not possible with Audition??

Is anyone else out there using a Line 6 Toneport device to record in Audition? This is a 96k recording device but choosing "96k" is not possible in Audition. I just spoke to Line 6 support and they say it's the fault of Audition. They say I have to choose 96k within Audition but I don't have to do that with my other devices. I'm able to record at 96 using other devices no problem by choosing in in the device control panel. The Line6 Toneport control panel doesn't give 96k as an option.
So Line 6 tells me that it's impossible to record at 96k in Audition. Please tell me it isn't so???
Anyone got any help here?
thanks!

A slight departure from previous behavior is that Audition no longer automatically changes the sample rate of your device. There were too many problems when switching between different applications (e.g. between Premiere Pro and Audition, or Audition and Windows Media Player, etc) and the clock setting changing on the device, and then the device "freaking out" (to put it politely).
So, if there's software that came with Echo where you can change the clock settings, you might want to set it to 96 kHz there first, and then Audition CS5.5 should just go along with 96 kHz.

Printing PDF files with smb/cups not possible // SLPReg status -20!

Hello *,
i am running SAMBA 3.6.1-1 and CUPS 1.5.0-1 on a dedicated system. Printer: Canon Pixma IP4500 (USB).
The problem is that all Windows 7 clients are not able to print PDF files (since few months) on that printer while printing these files with Linux software is no problem. The PDF files are neither encrypted nor forbidden to print.
I tried to print with Adobe Acrobat Reader X (latest) and Foxit Reader. Both are preparing the pages to be printed and close their printing dialog after processing. Windows printing queue does not show any jobs (which it even does not when printing simple images with MS Paint, which is not a problem).
Windows systems are using the Canon Inkjet 4500 and Canon iP 4500 driver (manually installed). Printing images works with both drivers.
I searched for "SLPReg […] failed with status -20!" but found no helpful information.
/var/log/cups/error_log
D [24/Dec/2011:23:05:35 +0100] Report: clients=0
D [24/Dec/2011:23:05:35 +0100] Report: jobs=499
D [24/Dec/2011:23:05:35 +0100] Report: jobs-active=0
D [24/Dec/2011:23:05:35 +0100] Report: printers=2
D [24/Dec/2011:23:05:35 +0100] Report: printers-implicit=0
D [24/Dec/2011:23:05:35 +0100] Report: stringpool-string-count=199735
D [24/Dec/2011:23:05:35 +0100] Report: stringpool-alloc-bytes=14344
D [24/Dec/2011:23:05:35 +0100] Report: stringpool-total-bytes=3718136
D [24/Dec/2011:23:05:36 +0100] cupsdNetIFUpdate: "lo" = localhost:631
D [24/Dec/2011:23:05:36 +0100] cupsdNetIFUpdate: "eth0" = 192.168.2.9:631
D [24/Dec/2011:23:05:36 +0100] cupsdNetIFUpdate: "lo" = localhost:631
D [24/Dec/2011:23:05:36 +0100] cupsdNetIFUpdate: "eth0" = [v1.fe80::1e6f:65ff:fe51:1b3+eth0]:631
D [24/Dec/2011:23:05:36 +0100] send_slp_browse(0x7f7d52023050 = "IP4500")
E [24/Dec/2011:23:05:36 +0100] SLPReg of "IP4500" failed with status -20!
D [24/Dec/2011:23:05:48 +0100] send_slp_browse(0x7f7d52017c90 = "IP4500_Duplex")
E [24/Dec/2011:23:05:48 +0100] SLPReg of "IP4500_Duplex" failed with status -20!
D [24/Dec/2011:23:06:07 +0100] send_slp_browse(0x7f7d52023050 = "IP4500")
E [24/Dec/2011:23:06:07 +0100] SLPReg of "IP4500" failed with status -20!
D [24/Dec/2011:23:06:19 +0100] send_slp_browse(0x7f7d52017c90 = "IP4500_Duplex")
E [24/Dec/2011:23:06:19 +0100] SLPReg of "IP4500_Duplex" failed with status -20!
D [24/Dec/2011:23:06:35 +0100] Report: clients=0
D [24/Dec/2011:23:06:35 +0100] Report: jobs=499
D [24/Dec/2011:23:06:35 +0100] Report: jobs-active=0
D [24/Dec/2011:23:06:35 +0100] Report: printers=2
D [24/Dec/2011:23:06:35 +0100] Report: printers-implicit=0
D [24/Dec/2011:23:06:35 +0100] Report: stringpool-string-count=199735
D [24/Dec/2011:23:06:35 +0100] Report: stringpool-alloc-bytes=14344
D [24/Dec/2011:23:06:35 +0100] Report: stringpool-total-bytes=3718136
D [24/Dec/2011:23:06:38 +0100] cupsdNetIFUpdate: "lo" = localhost:631
D [24/Dec/2011:23:06:38 +0100] cupsdNetIFUpdate: "eth0" = 192.168.2.9:631
D [24/Dec/2011:23:06:38 +0100] cupsdNetIFUpdate: "lo" = localhost:631
D [24/Dec/2011:23:06:38 +0100] cupsdNetIFUpdate: "eth0" = [v1.fe80::1e6f:65ff:fe51:1b3+eth0]:631
D [24/Dec/2011:23:06:38 +0100] send_slp_browse(0x7f7d52023050 = "IP4500")
E [24/Dec/2011:23:06:38 +0100] SLPReg of "IP4500" failed with status -20!
D [24/Dec/2011:23:06:50 +0100] send_slp_browse(0x7f7d52017c90 = "IP4500_Duplex")
E [24/Dec/2011:23:06:50 +0100] SLPReg of "IP4500_Duplex" failed with status -20!
/etc/samba/smb.conf
load printers = yes
printing = cups
printcap = cups
[printers]
path = /var/spool/samba
printable = yes
public = yes
writable = no
/etc/cups/printers.conf
# Printer configuration file for CUPS v1.5.0
# Written by cupsd on 2011-12-24 22:25
# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
<Printer IP4500>
UUID urn:uuid:f9850f70-d898-39ad-4e0a-9edfecf4977b
Info Canon iP4500 series
Location Keller
MakeModel Canon PIXMA iP4500 - CUPS+Gutenprint v5.2.7
DeviceURI usb://Canon/iP4500%20series?serial=42E635
State Idle
StateTime 1306084752
Type 45084
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
DenyUser xy
OpPolicy default
ErrorPolicy stop-printer
</Printer>
<Printer IP4500_Duplex>
UUID urn:uuid:14fcd3ca-2118-380e-5033-79beb09bb3b7
Info Canon iP4500 series (Duplex)
Location Keller
MakeModel Canon PIXMA iP4500 - CUPS+Gutenprint v5.2.7
DeviceURI usb://Canon/iP4500%20series?serial=42E635
State Idle
StateTime 1324761079
Type 45084
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>

Hi,
I can, unfortanetly, confirm this problem for me with a Brother HL-2030 and an HP Officejet 5600 series.
cups error log
D [03/May/2012:21:42:46 +0200] Report: printers=3
D [03/May/2012:21:42:46 +0200] Report: printers-implicit=0
D [03/May/2012:21:42:46 +0200] Report: stringpool-string-count=10577
D [03/May/2012:21:42:46 +0200] Report: stringpool-alloc-bytes=13088
D [03/May/2012:21:42:46 +0200] Report: stringpool-total-bytes=192536
D [03/May/2012:21:43:48 +0200] cupsdNetIFUpdate: "lo" = localhost:631
D [03/May/2012:21:43:48 +0200] cupsdNetIFUpdate: "eth0" = 192.168.2.100:631
D [03/May/2012:21:43:48 +0200] cupsdNetIFUpdate: "tun0" = 10.8.0.1:631
D [03/May/2012:21:43:48 +0200] cupsdNetIFUpdate: "lo" = localhost:631
D [03/May/2012:21:43:48 +0200] cupsdNetIFUpdate: "eth0" = [v1.fe80::201:2eff:fe27:6993+eth0]:631
D [03/May/2012:21:43:48 +0200] Report: clients=0
D [03/May/2012:21:43:48 +0200] Report: jobs=233
D [03/May/2012:21:43:48 +0200] Report: jobs-active=0
D [03/May/2012:21:43:48 +0200] Report: printers=3
D [03/May/2012:21:43:48 +0200] Report: printers-implicit=0
D [03/May/2012:21:43:48 +0200] Report: stringpool-string-count=10577
D [03/May/2012:21:43:48 +0200] Report: stringpool-alloc-bytes=13088
D [03/May/2012:21:43:48 +0200] Report: stringpool-total-bytes=192536
D [03/May/2012:21:44:50 +0200] cupsdNetIFUpdate: "lo" = localhost:631
D [03/May/2012:21:44:50 +0200] cupsdNetIFUpdate: "eth0" = 192.168.2.100:631
D [03/May/2012:21:44:50 +0200] cupsdNetIFUpdate: "tun0" = 10.8.0.1:631
D [03/May/2012:21:44:50 +0200] cupsdNetIFUpdate: "lo" = localhost:631
D [03/May/2012:21:44:50 +0200] cupsdNetIFUpdate: "eth0" = [v1.fe80::201:2eff:fe27:6993+eth0]:631
D [03/May/2012:21:44:50 +0200] Report: clients=0
D [03/May/2012:21:44:50 +0200] Report: jobs=233
D [03/May/2012:21:44:50 +0200] Report: jobs-active=0
D [03/May/2012:21:44:50 +0200] Report: printers=3
D [03/May/2012:21:44:50 +0200] Report: printers-implicit=0
D [03/May/2012:21:44:50 +0200] Report: stringpool-string-count=10577
D [03/May/2012:21:44:50 +0200] Report: stringpool-alloc-bytes=13088
D [03/May/2012:21:44:50 +0200] Report: stringpool-total-bytes=192536
printers.conf
# Printer configuration file for CUPS v1.5.0
# Written by cupsd on 2011-12-24 13:14
# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
<Printer CUPS-PDF>
UUID urn:uuid:ad99f5dd-2577-355f-759c-6b2941a88d34
Info Virtual PDF Printer
Location Zion
MakeModel Generic CUPS-PDF Printer
DeviceURI cups-pdf:/
State Idle
StateTime 1309396700
Type 8450124
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>
<Printer HL2030>
UUID urn:uuid:1b453a5d-ade0-3ddb-45e4-c5bcfe1feabd
Info Brother HL-2030 series
Location Zion
MakeModel Brother HL-2030 Foomatic/hl1250 (recommended)
DeviceURI usb://Brother/HL-2030%20series?serial=G6J274210
State Idle
StateTime 1324728260
Type 8433668
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>
<Printer HP5600>
UUID urn:uuid:8d882659-3c7e-319f-5072-38d14683cfaf
Info HP Officejet 5600
Location
MakeModel HP Officejet 5600 Series, hpcups 3.11.10
DeviceURI hp:/usb/Officejet_5600_series?serial=CN838F31ZQ04B2
State Idle
StateTime 1324728896
Type 8425484
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>
smb.conf
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
browseable = yes
# Set public = yes to allow user 'guest account' to print
guest ok = yes
writable = no
printable = yes
Did you find a solution in the meantime?

Download error on creative cloud. not possible to download new items

hi i am unable to download new apps to my creative cloud .
i have a full membership.
it keeps on saying download error on the apps page.
what can i do ?

what do you mean ?
i am not a pro ?
please explain safe mode with networking.
thank you

HT1766 I'm trying to update my first Ipad (versions 4.2.1). Device is recognised by the computer. Advise to upgrade to 5.1x given but then followed by the message that device is not connected to internet. Connection with upgrade server not possible.

Whilst connected to the internet (reading news and sending messages) I cannot upgrade my Ipad with an error message that my device is not connected to internet. Update server can not be reached?
Any ideas.
Ipad 1, version 4.2.1

I tried resetting the ipad, switched off wifi, checked date and time.

Error with IBAN Generation not possible

Similar Messages

Maybe you are looking for