Error With Installation CD (Zen Mic

Hello,
I have recently received a Zen Micro. I attempted to load the software on my computer from the Installation CD provided. When my computer reads the CD the Creative logo comes up and then a screen comes up that says to click the arrow button to begin installation. When I click the arrow button after a few seconds a error message comes up saying the following:
"DemoShield Player has encountered a problem and needs to close. We are sorry for the inconvenience"
It then goes on to say that they have created a error report, I have chosen not to send the report.
No matter what I try the error still appears. Any advice?

I think this is a common problem.
http://forums.creative.com/creativel...essage.id=2475
Click. Then press ctrl+F. Type in "DemoShield" and hit enter.

Similar Messages

HELP! Fatal error with Installation

I keep getting a fatal error with installation of version 7.6. I've uninstalled and installed it several times with the same problem. I have tried installing a older version again and now I'm getting the same error. Help!!

Hi Jorge,
I am sorry to hear that.
Here are a few things that I suggest you try:
Grant Full Control for SYSTEM, NETWORK SERVICE and Administrator on C:\Windows\ServiceProfiles\networkservice folder.
If you have Windows Process Activation service installed on the machine, uninstall it.
Open required RPC ports.
More information for you:
Service overview and network port requirements for Windows
http://support.microsoft.com/kb/832017#method7
If the issue still persists, please check the event logs to see if there are any related error messages and troubleshoot accordingly.
Regards,
Amy

Errors with Installation of OER 11.1.1.5

All
trying to install OER 11.1.1.5.
The installation works fine, including Db setup. schema install etc..
Installing a base domain with the config.sh also works no problem at all
But when I try to create an OER domain (not extending an existing domain, haven't tried that)
the domain creation fails with a jython script error.
I'll get the details and append this post, but I was wondering if this was
a known problem
Environment : Oracle Enterprise Linux R5U4 - 32 bit
On Virtual Box VM 4.08
WLS 10.3.5
sun 1.6 jdk
heres the log output 2011-05-22 20:42:47,915 INFO [WizardController] com.oracle.cie.domain.template.catalog.impl.ComponentsXMLConverter - /home/u01/Oracle/middleware/wlserver_10.3/common/lib/components.xml does not contain component elements and will be skipped
2011-05-22 20:42:47,939 INFO [WizardController] com.oracle.cie.wizard.domain.gui.tasks.MultipleTemplateSelectionGUITask - Selected required template: Basic WebLogic Server Domain:10.3.4.0 [home/u01/Oracle/middleware/wlserver_10.3/common/templates/domains/wls.jar]
2011-05-22 20:43:12,695 INFO [WizardController] com.oracle.cie.domain.WLSTemplateBuilder - No config-groups.xml found in template
2011-05-22 20:43:12,698 INFO [WizardController] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
2011-05-22 20:43:13,449 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Adding top-level component reference: WebLogic Server version 10.3.5.0
2011-05-22 20:43:13,453 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Setting symbol for component WebLogic Server version 10.3.5.0 to WebLogic_Server_10.3.5.0_wlserver_10.3_ORACLE_HOME
2011-05-22 20:43:13,623 INFO [WizardController] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
2011-05-22 20:43:13,695 WARN [WizardController] com.oracle.cie.domain.AbstractTemplate - Could not find component name 'Oracle Enterprise Repository' version 'null'
2011-05-22 20:43:13,695 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Replacing component reference Oracle Enterprise Repository version null with top-level component reference: WebLogic Server version 10.3.5.0
2011-05-22 20:43:13,696 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Setting symbol for component WebLogic Server version 10.3.5.0 to WebLogic_Server_10.3.5.0_wlserver_10.3_ORACLE_HOME
2011-05-22 20:43:13,724 WARN [WizardController] com.oracle.cie.domain.aspect.XBeanConfigAspect - Unable to locate property:Target on type:class com.oracle.cie.domain.xml.configxb.impl.MachineTypeImpl
2011-05-22 20:43:13,734 WARN [WizardController] com.oracle.cie.domain.aspect.XBeanConfigAspect - Unable to locate property:Target on type:class com.oracle.cie.domain.xml.configxb.impl.ServerTypeImpl
2011-05-22 20:44:44,248 ERROR [WizardController] com.oracle.cie.common.util.JdkVersion - JDK version is null.
2011-05-22 20:44:56,840 INFO [WizardController] com.oracle.cie.domain.DomainChecker - ListenPort internal Validation result= [null]
2011-05-22 20:44:56,843 INFO [WizardController] com.oracle.cie.domain.DomainChecker - ListenPort external Validation result= [null]
2011-05-22 20:45:02,869 ERROR [create_gui] com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask - Generation Error!!
Traceback (innermost last):
(no code object) at line 0
SyntaxError: ('Lexical error at line 6, column 11. Encountered: "@" (64), after : ""', ('<iostream>', 6, 11, 'oerPort = @DOMAIN_LISTEN_PORT@'))
at org.python.core.parser.fixParseError(Unknown Source)
at org.python.core.parser.parse(Unknown Source)
at org.python.core.Py.compile_flags(Unknown Source)
at org.python.util.PythonInterpreter.execfile(Unknown Source)
at org.python.util.PythonInterpreter.execfile(Unknown Source)
at com.oracle.cie.domain.script.ScriptHelper.executeEmbeddedTemplateScript(ScriptHelper.java:1571)
at com.oracle.cie.domain.DomainChecker.executeEmbeddedScript(DomainChecker.java:1322)
at com.oracle.cie.domain.DomainChecker.runCustomWLSTScript(DomainChecker.java:1305)
at com.oracle.cie.domain.DomainChecker.preprocessOutput(DomainChecker.java:143)
at com.oracle.cie.domain.DomainGenerator.generate(DomainGenerator.java:269)
at com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask$1.run(DomainCreationGUITask.java:216)
Edited by: michael_j_quinn on May 24, 2011 4:48 AM

Hi Guys
Is no one using OER ??

Error with Installation of SAP R/3 4.6C on Windows 64 Bit

Hi,
we have the following problem by installing the SAP R/3 4.6C on Windows 64 Bit:
DBDBSLTESTCONNECT_NT_IND , SysDbslConnect: 100
Cannot connect to DB, rc = 8192
Can some one help me?
What is the user connecting during the installation?
Thank you!

File DATABASE.R3S contains the following phases in 4.6C SR2. This file is usually same in most releases. This file must be edited befure running with R3SETUP. Here all the phases.
Phases marked with BOLD are not necessary and MUST NOT BE RUNNED.
You have to put "STATUS=OK" line at the end of all these phases by using R3EDIT, SAPPAD or NOTEPAD.
10=DATABASEINSTANCE_NT_MSS
20=DBCOMMONDBENV_NT_MSS
30=CALCRAM_NT_MSS
40=CDSERVERBASE_NT_MSS
50=OSGROUPSAPLOCAL_NT_IND
60=OSGROUPSAPLOCALADMIN_NT_IND
70=OSGROUPSAPGLOBAL_NT_IND
80=OSUSERSIDADM_NT_IND
90=OSUSERSIDADMPASSWD_NT_IND
100=OSUSERSIDADMRIGHTS_NT_IND
110=DBOSUSERMSSXP_NT_MSS
120=DBOSUSERMSSXPPASSWD_NT_MSS
130=GETDBSIZEKEYS_IND_IND
140=DBBUILDTEMPDB_NT_MSS
150=DBBUILD_NT_MSS
160=DBPOSTBUILD_NT_MSS
170=DBPRELOAD_NT_MSS
180=DBMULTISCHEMA_NT_MSS
190=DBDBSLTESTCONNECT_NT_IND
200=DBR3LOADEXECDUMMY_IND_IND
210=DBR3LOADEXEC_NT_MSS
220=DBR3LOADVIEWDUMMY_IND_IND
230=DBR3LOADVIEW_NT_IND
240=DBPOSTLOAD_NT_MSS
250=DBCONFIGURATION_NT_MSS
260=DBPROCEDURES_NT_MSS
270=DBR3LICENSECREATE_NT_MSS
280=DIPGNTAB_NT_IND
290=EXITMNLSSTARTR3_NT_IND
300=RFCRSWBOINI_IND_IND
310=RFCRADDBDIF_IND_IND320=QUERIESFINISHED_NT_IND

Problem with running the midlet class (Error with Installation suite )

hi everyone...
i have problem with running the midlet class(BluetoothChatMIDlet.java)
it keep showing me the same kind of error in the output pane of netbeans...
which is:
Installing suite from: http://127.0.0.1:49296/Chat.jad
[WARN] [rms ] javacall_file_open: wopen failed for: C:\Users\user\javame-sdk\3.0\work\0\appdb\delete_notify.dat
i also did some research on this but due to lack of forum that discussing about this,im end up no where..
from my research i also find out that some of the developer make a changes in class properties..
where they check the SIGN DISTRIBUTION...and also change the ALIAS to UNTRUSTED..after that,click the EXPORT KEY INTO JAVA ME SDK,PLATFORM,EMULATOR...
i did that but also didnt work out..
could any1 teach me how to fix it...
thanx in advance... :)

actually, i do my FYP on bluetooth chatting...
and there will be more than two emulators running at the same time..
one of my frens said that if u want to run more than one emulator u just simply click on run button..
and it will appear on the screen..

Fatal error with installation of je22 con. arch. beta impl.

          In step 6 it says that classpath must start with connector.jar and
          welogic60J2eeConnector.jar. But if I do that then the following
          fatal error occurs. But if the jar files are after weblogic_sp.jar
          and weblogic.jar then there is no problem with starting the server.
          How can I avoid the error? Thanks.
          <20-03-2001 13:47:50 GMT+01:00> <Emergency> <Server> <Unable to
          initialize the server: 'Fatal initialization exception
          Throwable: java.lang.VerifyError: Cannot inherit from final class
          java.lang.VerifyError: Cannot inherit from final class
          at java.lang.ClassLoader.defineClass0(Native Method)
          at java.lang.ClassLoader.defineClass(ClassLoader.java:486)
          at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:111)
          at java.net.URLClassLoader.defineClass(URLClassLoader.java:248)
          at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
          at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
          at java.security.AccessController.doPrivileged(Native Method)
          at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
          at java.lang.ClassLoader.loadClass(ClassLoader.java:297)
          at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:286)
          at java.lang.ClassLoader.loadClass(ClassLoader.java:253)
          at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:313)
          at weblogic.rmi.internal.ServerRequest.makeCBVOutputStream(ServerRequest.java:50)
          at weblogic.rmi.internal.ServerRequest.getMsgOutput(ServerRequest.java:95)
          at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:24
          5)
          at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:22
          5)
          at weblogic.jndi.internal.ServerNamingNode_WLStub.createSubcontext(ServerNamingNod
          e_WLStub.java:248)
          at weblogic.jndi.internal.WLContextImpl.createSubcontext(WLContextImpl.java:81)
          at weblogic.transaction.internal.JNDIAdvertiser.initialize(JNDIAdvertiser.java:76)
          at weblogic.transaction.internal.TransactionService.initialize(TransactionService.
          java:38)
          at weblogic.t3.srvr.ServerServiceList.initialize(ServerServiceList.java:46)
          at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:405)
          at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
          at weblogic.Server.main(Server.java:35)
          '>


          Sorry for the confusion. As you have already installed wls6.0SP1, you
          can download our JCA beta for wls6.0SP1 from:
          http://developer.bea.com/code/wls.jsp Or directly from:
          http://developer.bea.com/ftp_bin/weblogic60SP1J2eeConnector.zip
          prasen
          Murali wrote:
          >
          > Hi
          >
          > Thanks for the prompt reply.
          > I have once again installed the weblogic600sp1_win.exe (that's
          > the only one available for NT) and the weblogic_sp.jar was not
          > installed (shouldn't it also be with the package). I don't know
          > whether there are any other files which conflict with connector
          > but the problem still exist. I have also wl5.1.0 installed on
          > the same machine. Can both versions be on the same machine?
          >
          > With best regards,
          > murali
          >
          > prasen <[email protected]> wrote:
          > >Looks to me that you are using JCA with weblogicServicePack.
          > >Our JCA for
          > >WeblogicServicePack will be coming out soon. Till then
          > >you should use
          > >our JCA beta with Weblogic6.0(and not with SP).
          > >
          > >prasen
          > >
          > >"N.S. Murali" wrote:
          > >>
          > >> In step 6 it says that classpath must start with connector.jar
          > >and
          > >> welogic60J2eeConnector.jar. But if I do that then the
          > >following
          > >> fatal error occurs. But if the jar files are after weblogic_sp.jar
          > >> and weblogic.jar then there is no problem with starting
          > >the server.
          > >> How can I avoid the error? Thanks.
          > >>
          > >> <20-03-2001 13:47:50 GMT+01:00> <Emergency> <Server>
          > ><Unable to
          > >> initialize the server: 'Fatal initialization exception
          > >> Throwable: java.lang.VerifyError: Cannot inherit from
          > >final class
          > >> java.lang.VerifyError: Cannot inherit from final class
          > >> at java.lang.ClassLoader.defineClass0(Native
          > >Method)
          > >> at java.lang.ClassLoader.defineClass(ClassLoader.java:486)
          > >> at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:111)
          > >> at java.net.URLClassLoader.defineClass(URLClassLoader.java:248)
          > >> at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
          > >> at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
          > >> at java.security.AccessController.doPrivileged(Native
          > >Method)
          > >> at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
          > >> at java.lang.ClassLoader.loadClass(ClassLoader.java:297)
          > >> at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:286)
          > >> at java.lang.ClassLoader.loadClass(ClassLoader.java:253)
          > >> at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:313)
          > >> at weblogic.rmi.internal.ServerRequest.makeCBVOutputStream(ServerRequest.java:50)
          > >> at weblogic.rmi.internal.ServerRequest.getMsgOutput(ServerRequest.java:95)
          > >> at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:24
          > >> 5)
          > >> at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:22
          > >> 5)
          > >> at weblogic.jndi.internal.ServerNamingNode_WLStub.createSubcontext(ServerNamingNod
          > >> e_WLStub.java:248)
          > >> at weblogic.jndi.internal.WLContextImpl.createSubcontext(WLContextImpl.java:81)
          > >> at weblogic.transaction.internal.JNDIAdvertiser.initialize(JNDIAdvertiser.java:76)
          > >>
          > >> at weblogic.transaction.internal.TransactionService.initialize(TransactionService.
          > >> java:38)
          > >> at weblogic.t3.srvr.ServerServiceList.initialize(ServerServiceList.java:46)
          > >> at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:405)
          > >> at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
          > >> at weblogic.Server.main(Server.java:35)
          > >> '>

Error with installation of elements 11

I had the trail version of 10 installed, decided to wait and get 11, and it errors every time I try to install. Any ideas? 10 installed no problem.

Hi,
PSE 10 trial should not affect the installation of PSE 11 .
I am assuming you are getting the error related to Shared technology installtion problem .
Please restart your system and then install .
Even it does not solve your problem please try solution under this page.
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html#main_Error__Below_mentioned_applications_have_failed_to_install__Shared_tech nologies_
thanks,
earth-star

Error with installation of EX Edition

hi
I am trying to install expresses edition and was successful also. I am able to run sql+ and isql but when i run enterprise database managment tool on the browser it says server not found. i ran emca also and started the service but still i am getting the error. If anyone else has face the problem and know the solution kindly let me know
regards
dev

the java version yes, not the dbconsole that the OP
was talking aboutGood to know. I only remembered an Oracle session, where they mentioned that XE doesn't come with an "agent" to be addressed by remote OEM ... or was it OMS?
C.
Message was edited by:
cd

Error with installation

When I download any of the updates 11.0-2 to 11.0.0-3, I get an error message saying I can't ope nthe patcher app because it was not downloaded from the Apple App Store.
Mavricks, AE CS6 version 11 (which won't open ).
Any clever soul know a workaround for this nonsense?

Hi,
I've been trying to patch my CS6 to work with Mavericks for weeks now.
Spent four hours on the phone and Adobe Connect with Tech support yesterday, I got the impression the guy gave up (told me to reinstall Mavericks and try a clean reinstall, which i did, no go)
Very annoyed because it seems I've wasted £165 on the upgrade to CS6, nearly a week of labour trying to patch the ^&$*&^ thing, and the result seems to be I have to continue asking my clients to down-save any AE docs to CS5.5 before I can work on them.
Very disappointed.
thanks for all the tips anyway!

Errors with installation Disc 2

i tried to reinstall Tiger since it appeared that the OS needed to be reloaded to resolve another problem, which is that the apple bar disappeared. Now when i get to disc 2, it tells me there are errors and I have to try again. I've followed all of the useful advice on this thread, reset the PRAM, etc but still have the same problem after innumerable attempts to reinstall. Yes, I did clean the disc, and before today it was used exactly once.
http://discussions.apple.com/thread.jspa?messageID=7739310
Anyone have some suggestions? Plan B is to bring it to the apple store and let them figure it out
cheers

Hi pj3,
Did you not try this one from that link?
Use the Customize Install option to reduce the Fonts, Printer Drivers, Languages, and Applications to a minimum, so disk 2 never gets asked for.
Second install disk won't work...
There've been many reports of this, some had the disks replaced by Apple and it worked, some didn't.
A workaround is to reduce the number of Languages, Printer, Drivers, Fonts, and APPs until it no longer needs Disk 2 for the install.

Critical Error with installation

"Critical errors were found in setup
- You cannot install this product because a conflicting
compoent is already installed.
Please see the Setup log file for details."
I guess I have to wipe something from my hard drive but I'm
not sure what. I don't know what they mean by Setup log file so I
don't know how to check that. This error message has been keeping
me from installing Dreamweaver CS3.

I too hit this error. I have a customer that has a current 8.6(2) install, and wants to upgrade to 10.5. We are doing this on a UCS C260 server.
We were attempting to load this on the 10.5 OVA. After looking over the thread above, I noted the adapter type change made by manuelmtzdominguez. I started looking at this, and sure enough, the adapter type is seems to be the root cause.
The OVA for an 8.6 machine uses an adapter type "flexible", but the adapter type on the 10.5 OVA is using VMXNET3. On the 10.5 OVA, the only available options are VMXNET3 and E1000. Flexible isn't an option.
In my case, I'm simply going to install it on the 8.6 OVA, and then use Prime Deployment to run the upgrade to 10.5 (to get everything just right).
Moral of the story is, I guess, check the adapter types since apparently some options are not supported on older versions.

Iphoto error with installation

I need help and will appreciate it! iphoto became inactive and I had to delete and re-install the software ilife 11 to no avail! After some reseach I discovered that I need to download and install the patch to resolve the problem. I downloaded the patch iphoto update 9.4.2 and when installing the patch I received an errod code 4960 please below screen print and assit me resolve this.
Thanks & regards,
Jakkie

Try a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode - About
Safe Mode

MSI 1612 Error with ZEN 7 SP1

Since upgrading to ZENworks for Desktops 7, I have been unable to
distribute MSI applications. I always seem to have an error 1612 when
the application tries to distribute. I believe that this error usually
means that the path to the installation files cannot be found, usually
because of a file rights issue, but that doesn't seem to be the case here.
I distribute most applications by associating them to workstations or
workstations in a container, though I have the same 1612 error if I do
associate by user. I have the same problem whether the Distribute in
Workstation Security Space if Workstation Associated option is enabled
or disabled.
I typically use the File Rights screen under the Common tab to assign
rights to the distribution files directory, so I know that the
workstation object has rights to the files. Just to test this, I
created an app object to run an Explorer window as an unsecured system
user and made sure that I could browse to the distribution directory as
the System account.
I am currently running ZENworks 7 SP1 on a NetWare 6.5 SP5 server. All
workstations are running Windows XP Pro SP2.
As an experiment, I tried working around the problem by creating a
simple application object and running an MSI installation by calling
msiexec from a predistribution script as follows:
%WINDIR%\System32\msiexec.exe /i "\\GRYPHON\DISTRIBUTION\West Point
Bridge Designer 2004\West Point Bridge Designer 2004.msi" /qn
Installing this way seems to work fine.
Any ideas what is going wrong?
Cory Calvert
District Network Administrator
Waterloo School District

I'd like to know of this hotfix as well. I cant distribute a msi app
either due to the 1612 errors.
[email protected] wrote:
> I'm experiencing the 1612 error with Zen 7 sp1. What hotfix are you
> refering to?
>
> Lyle
>
> On Wed, 10 Jan 2007 15:48:14 GMT, dt <[email protected]> wrote:
>
>> Cory Calvert wrote:
>>> I checked, and am definitely running the SP1 agent, version 7.0.1.0, so
>>> that shouldn't be an issue. I don't think that it can' really be a
>>> rights issue, since I can browse to the installation files as the system
>>> account on the local machine and even get the installation to work by
>>> calling msiexec from a predistribution script, though I have tried
>>> assigning file rights to the entire organization just to make sure but
>>> still had the same problem.
>>>
>>> Denis wrote:
>>>> Few hints:
>>>> Try assign rights directly to WS or WS container instead through
>>>> application object.
>>>> Try SP1 agent, if you are not using it already.
>>>>
>>>> Denis
>>>>
>>>> "Cory Calvert" <[email protected]> wrote in message
>>>> news:[email protected]...
>>>>> Since upgrading to ZENworks for Desktops 7, I have been unable to
>>>>> distribute MSI applications. I always seem to have an error 1612
>>>>> when the application tries to distribute. I believe that this error
>>>>> usually means that the path to the installation files cannot be
>>>>> found, usually because of a file rights issue, but that doesn't seem
>>>>> to be the case here.
>>>>>
>>>>> I distribute most applications by associating them to workstations or
>>>>> workstations in a container, though I have the same 1612 error if I
>>>>> do associate by user. I have the same problem whether the Distribute
>>>>> in Workstation Security Space if Workstation Associated option is
>>>>> enabled or disabled.
>>>>>
>>>>> I typically use the File Rights screen under the Common tab to assign
>>>>> rights to the distribution files directory, so I know that the
>>>>> workstation object has rights to the files. Just to test this, I
>>>>> created an app object to run an Explorer window as an unsecured
>>>>> system user and made sure that I could browse to the distribution
>>>>> directory as the System account.
>>>>>
>>>>> I am currently running ZENworks 7 SP1 on a NetWare 6.5 SP5 server.
>>>>> All workstations are running Windows XP Pro SP2.
>>>>>
>>>>> As an experiment, I tried working around the problem by creating a
>>>>> simple application object and running an MSI installation by calling
>>>>> msiexec from a predistribution script as follows:
>>>>>
>>>>> %WINDIR%\System32\msiexec.exe /i "\\GRYPHON\DISTRIBUTION\West Point
>>>>> Bridge Designer 2004\West Point Bridge Designer 2004.msi" /qn
>>>>>
>>>>> Installing this way seems to work fine.
>>>>>
>>>>> Any ideas what is going wrong?
>>>>>
>>>>>
>>>>>
>>>>> Cory Calvert
>>>>> District Network Administrator
>>>>> Waterloo School District
>>>>
>> I believe there is a bug of some sort regarding sp1... i am using the
>> sp1 hot fix and it all works fine, but when I test on a sp1 i get the
>> 1622 error.....using a basic and calling the msiexec works on both.
>

SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory

SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory
after retry..again SharePoint Designer requires the following component require to install Microsoft.NET framework version 4 i have downloaded and try to installed but fail not work please answer what to do?
Thanks and Regards, Rangnath Mali

Hi Rangnath,
For running SharePoint Designer 2013, you need to install Microsoft .NET 4.0 Framework or higher.
Please uninstall the Microsoft .NET 4.0 Framework, and install it again. After that, reboot your machine.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Error in installation with NW04S

Hi,
error : CJS-30196. SAPBC JSF Communication role is not assigned to the user SAPJSF.
i am getting the fallowing error in installation with NW04S. while trying to assign the above role to the user.any body help me with the solution.
Thanks & Regards
kiran.B

Hi,
Assign the Role <b>SAP_BC_JSF_COMMUNICATION_RO</b> to the profile of SAPJSF user in production client and restart the installation.
Regards,
Siddhesh

Error With Installation CD (Zen Mic

Similar Messages

Maybe you are looking for